ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO PORTUGUÊS AV-32X4SU AV-28X4SU AV-32X4BU AV-28X4BU COLOUR TELEVISION FARBFERNSEHGERÄT TELEVISEUR COULEUR KLEURENTELEVISIE TELEVISOR A COLOR TELEVISORE A COLORI TELEVISOR A CORES INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES ISTRUZIONI INSTRUÇÕES Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: · Operate only from the power source specified (AC 220 ­ 240 V, 50 Hz) on the unit. · Avoid damaging the AC plug and power cord. · When you are not using this unit for a long period of time, it is recommended that you disconnect the power cord from the main outlet. · The main power button on the TV does not fully isolate the TV from the AC supply. If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket. ENGLISH Avoid improper installation and never position the unit where good ventilation is unattainable. When installing this television, distance recommendations must be maintained between the floor and wall, as well as installation in a tightly enclosed area or piece of furniture. Adhere to the minimum distance guidelines shown for safe operation. Failure to heed the following precautions may result in damage to the TV or remote control. DO NOT block the TV's ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) DO NOT place anything on top of the TV. (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) DO NOT allow objects or liquid into the cabinet openings. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.) DO NOT place any naked flame sources, such as lighted candles, on the TV. The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it. In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. NOTE: Due to static electricity, the TV may be covered with dust. If this happens, wipe the TV with a soft cloth being careful not to scratch the TV. 1 CONTENTS Setting up your TV ...................................3 Connecting the aerial and VCR ................. 3 Connecting the power cord to the AC outlet....................................................... 4 Putting the batteries into the Remote control..................................................... 4 Initial settings ............................................. 4 T-V LINK FUNCTIONS .............................. 6 SOUND SETTING ................................... 23 STEREO / I · II ......................................... 23 Sound Adjustment.................................... 23 HYPER SOUND....................................... 23 3D CINEMA SOUND ............................... 24 SURROUND ............................................ 24 BASS BOOST .......................................... 24 TV buttons and functions........................8 Turn the Main power on ............................. 9 Turn the TV on from standby mode ........... 9 Choose a TV channel ................................ 9 Adjust the volume ...................................... 9 EXT SETTING ......................................... 25 S-IN (S-VIDEO input) ............................... 25 ID LIST ..................................................... 25 DUBBING................................................. 26 FEATURES ............................................. 27 SLEEP TIMER ......................................... 27 BLUE BACK ............................................. 27 CHILD LOCK............................................ 27 DECODER (EXT-2).................................. 29 Remote control buttons and functions..............................................10 Turn the TV on or off from standby mode .................................................... 10 Choose a TV channel .............................. 10 Adjust the volume .................................... 11 Watch images from external devices ....... 11 ZOOM function......................................... 12 3D CINEMA SOUND function.................. 14 Displaying the current time ...................... 14 Return to TV channel instantly................. 14 Operating a JVC brand VCR or DVD player ........................................... 14 INSTALL.................................................. 30 LANGUAGE ............................................. 30 AUTO PROGRAM.................................... 30 EDIT/MANUAL ......................................... 31 Additional menu operations ................. 36 Using the ACI function ............................. 36 Downloading the data to VCR.................. 37 Changing the COUNTRY setting ............. 37 Using the DECODER (EXT-2) function.... 38 Teletext function ....................................15 Basic operation ........................................ 15 Using the List Mode ................................. 15 Hold.......................................................... 16 Sub-page ................................................. 16 Reveal...................................................... 16 Size .......................................................... 16 Index ........................................................ 16 Cancel...................................................... 17 Additional preparation .......................... 39 Connecting the external devices .............. 39 CH/CC numbers ..................................... 41 Troubleshooting .................................... 43 Specifications ........................................ 46 Using the TV's menu..............................18 Basic operation ........................................ 18 PICTURE SETTING.................................19 PICTURE MODE ..................................... 19 Picture Adjustment................................... 19 COLOUR TEMP....................................... 19 PICTURE FEATURES .............................20 DIGITAL VNR .......................................... 20 DigiPure Pro............................................. 20 COLOUR SYSTEM.................................. 21 MOVIE THEATRE.................................... 21 4:3 AUTO ASPECT.................................. 22 PICTURE TILT (Only for AV-32X4SU/AV-32X4BU)...... 22 2 Setting up your TV Caution · Turn off all the equipment including the TV before connecting anything. Connecting the aerial and VCR · The connecting cables are not provided. · For further details, refer to the manuals provided with the devices to be connected. ENGLISH If connecting a VCR, follow A B C. If not connecting a VCR, follow 1. To operate T-V LINK functions, a T-V LINK compatible VCR must be connected to the EXT-2 terminal on the TV. For details about T-V LINK functions, see "T-V LINK FUNCTIONS" on page 6. · A video can be viewed from the VCR without performing C. For details, refer to your VCR instruction manual. · To connect additional external devices, please see "Additional preparation" on page 39. · To connect speakers and amplifier, please see "Connecting Speakers/Amplifier" on page 40. · When a decoder is connected to a T-V LINK compatible VCR, set the DECODER (EXT-2) function to ON. For details, see "Using the DECODER (EXT2) function" on page 38. Otherwise, you will not be able to view scrambled channels. Back of the TV 75-ohm Coaxial Cable Aerial EXT-1 L R EXT-2 S EXT-3 S AUDIO OUT 21-pin SCART Cable 75-ohm Coaxial Cable To Aerial Input VCR AV IN/OUT Terminal To Aerial Output Rear Panel 1 2 3 4 5 EXT-1 Aerial socket (3) EXT-1 terminal (3, 25, 39) EXT-2 terminal (3, 6, 25, 39) EXT-3 terminal (25, 39) AUDIO OUT terminal (40) L R EXT-2 S EXT-3 S AUDIO OUT 3 Setting up your TV Connecting the power cord to the AC outlet Caution · Operate only from the power source specified (AC 220 ­ 240 V, 50 Hz) on the unit. Initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the onscreen display to make the initial settings. 0 AV Blue button TV P MENU OK Putting the batteries into the Remote control Use two AAA/R03 dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. P 1 Press the Main power button on the TV The Power lamp lights, and the JVC logo is displayed. · Follow the warnings printed on the batteries. · Battery life is about six months to one year, depending on your frequency of use. · The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary. · If the remote control does not work properly, replace the batteries. Main power button Power lamp · The JVC logo does not appear when your TV has been turned on once. In this case, use the "LANGUAGE" and "AUTO PROGRAM" functions to make the initial settings. For details, see "INSTALL" on page 30. 4 Setting up your TV 2 Press the a button The LANGUAGE menu appears. LANGUAGE BACK TV OK 5 Press the blue button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR). · To cancel the AUTO PROGRAM function: Press the b button. AUTO PROGRAM CH 10 20% TV ENGLISH D0002(E)-EN 3 Press the 5 and 6 buttons to choose ENGLISH. Then press the a button English is set for the on-screen display description. The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function. There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY menu as follows: BACK OK EDIT PR AV 01 02 03 04 05 06 07 08 09 TV ID BBC1 BACK OK MOVE CH / CC CH 21 CH 22 CH 23 CH 24 CH 25 CH 26 CC 01 CC 02 CC 03 D0004-EN ID INSERT DELETE MANUAL BACK TV OK START MORE TV BACK OK START MORE D0003-EN 4 Press the 5 and 6 buttons to choose the country where you are now located After the TV channels have been registered in the Programme numbers (PR), the EDIT menu appears · You can proceed to edit the Programme numbers (PR) using the EDIT/MANUAL function. For details, see "EDIT/MANUAL" on page 31. · If you do not need to use the EDIT/ MANUAL function, go to the next step. If "ACI START/ACI SKIP" appears in the AUTO PROGRAM menu: You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels in a short period of time. For details of the ACI function and how to use it, refer to "Using the ACI function" on page 36. If you don't want to use the ACI function, press the 6 buttons to choose ACI SKIP and then press a. 5 Setting up your TV 6 Press the a button to display the T-V LINK menu T-V LINK DOWNLOAD TV VCR T-V LINK FUNCTIONS When a T-V LINK compatible VCR is connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK functions: A T-V LINK compatible VCR is necessary. The VCR must be connected to the EXT-2 terminal on the TV by a fully wired SCART cable. A "T-V LINK compatible VCR" means a JVC VCR with the T-V LINK logo or a VCR with one of the following logos. However, these VCRs may support some or all of the features described below. For details, refer to your VCR instruction manual. "Q-LINK" (a trademark of Panasonic Corporation) "Data Logic" (a trademark of Metz Corporation) "Easy Link" (a trademark of Phillips Corporation) "Megalogic" (a trademark of Grundig Corporation) "SMARTLINK" (a trademark of Sony Corporation) BACK TV OK EXIT D0005-EN 7 If you do not have a T-V LINK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears. If you have a T-V LINK compatible VCR connected to the EXT-2 terminal: Follow the operating procedure "Downloading the data to VCR" on page 37 to transmit the Programme number (PR) data. Now, the initial settings are complete, and you can watch the TV · When your TV can detect the TV channel name from the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Programme number (PR) in which the TV channel has been registered. · If a TV channel you want to view is not set to a Programme number (PR), manually set it using the MANUAL function. For details, see "EDIT/ MANUAL" on page 31. · The TV channel is not registered in Programme number PR 0 (AV). When you want to register a TV channel to PR 0 (AV), manually set ...