User manual JWIN I1255

V10M10_IM_EN_02142008 5.1 - Channel Slim Desktop iPod / DVD Player Instruction Manual Model: i1255 -1- www.i-Luv.com V10M10_IM_EN_02142008 -2- www.i-Luv.com V10M10_IM_EN_02142008 INTRODUCTION Thank you for purchasing the i1255. Unpack the unit and make sure all the accessories are put aside so they will not be lost. We recommend that you retain the original carton and packaging materials for future use, should you transport or ship the unit in the future. 5.1 - Channel Slim Desktop iPod / DVD Player AUDIO AND VIDEO MP3 CD AUDIO AND VIDEO iPod ® DIGITAL MEDIA PLAYER AUDIO CD Kodak® Picture CD DOLBY® DIGITAL DECODING * Please refer to the safety instructions on page 24 in this manual -3- www.i-Luv.com V10M10_IM_EN_02142008 TABLE OF CONTENTS Getting Started Location of Controls on the Main Unit ................................................................... Location of Controls on the Remote Control ......................................................... Preparing the Remote Control for Use ................................................................. Using the Remote Control ................................................................................. Setting up the Player ....................................................................................... Connecting the Unit to a TV .............................................................................. Connecting External Audio ................................................................................ 5 7 8 8 9 9 9 10 10 10 10 11 11 11 11 12 12 13 14 15 16 16 17 17 18 18 18 19 19 19 20 20 21 21 21 24 Operational Instructions Using Your iPod ............................................................................................. Connecting your iPod to the Dock ................................................................... Playing your iPod Contents on TV ................................................................... Music Menu ................................................................................................ Video Menu ................................................................................................ Changing the Settings ................................................................................... Changing the Screen Mode ........................................................................... Tips for iPod Video Playing ............................................................................ System Setup ................................................................................................ Navigating the Setup Menu ............................................................................... Language Setup ............................................................................................. Audio Setup ................................................................................................... Video Setup ................................................................................................... Speaker Setup ............................................................................................... Digital Setup .................................................................................................. Basic DVD Operation ....................................................................................... Menu Play .................................................................................................. Title Play ................................................................................................... Sequence Play ............................................................................................ Program Play ............................................................................................. Volume Control .............................................................................................. Mute ............................................................................................................ JPEG / MP3 Playback ...................................................................................... Troubleshooting Guide iPod Problems ­ Possible Solutions .................................................................... DVD Player Problems ­ Possible Solutions .......................................................... Features and Specifications Features for your iPod .................................................................................. Features for your DVD Player ........................................................................ Specifications ............................................................................................. User Safety Guide ................................................................... -4- www.i-Luv.com V10M10_IM_EN_02142008 GETTING STARTED Location of Controls on the Main Unit Top Front 1. iPod DOCK 2. POWER BUTTON 3. OPEN / CLOSE BUTTON 4. PREV BUTTON 5. PLAY / PAUSE BUTTON 6. NEXT BUTTON 7. STOP BUTTON 8. iPod BUTTON 9. DVD BUTTON 10. DISC TRAY 11. LED SCREEN 12. REMOTE SENSOR -5- www.i-Luv.com V10M10_IM_EN_02142008 GETTING STARTED Location of Controls on the Main Unit-continued Back 1. COMPOSITE VIDEO OUTPUT 2. S-VIDEO OUTPUT 3. 5.1-CH AUDIO OUTPUT (FL, FR, SL, SR, CEN, SW) 4. COMPONENT VIDEO OUTPUT (Y, Pb, Pr) 5. DIGITAL AUDIO COAXIAL OUTPUT 6. POWER SWITCH DISC ERROR This DVD player has built-in error compensation circuits to correct minor defects in a disc. There are limits, however, to the amount of correction available. In some cases, the DVD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) on the disc being played which are too large for the error compensation circuits to handle. If you encounter this problem, try a new disc before having this unit serviced. If the DVD player operates normally, the skipping problem is probably due to a defective disc. Note: Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be played depending on the condition of the disc. -6- www.i-Luv.com V10M10_IM_EN_02142008 GETTING STARTED Location of Controls on the Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. OPEN / CLOSE BUTTON NUMBER 0 TO 10+ BUTTONS SLOW BUTTON ZOOM BUTTON PAUSE BUTTON MENU BUTTON NAVIGATION ( / / iPod MODE BUTTON ENTER BUTTON 3 4 5 23 6 7 8 9 10 11 29 12 13 14 15 30 31 32 24 25 26 27 28 / ) BUTTONS* 17 2 18 19 20 21 22 1 16 10. FWD BUTTON 11. REV BUTTON 12. A-B BUTTON 13. REPEAT BUTTON 14. PROG BUTTON 15. P / N BUTTON 16. STANDBY BUTTON 17. SUBTITLE BUTTON 18. LANGUAGE BUTTON 19. TITLE BUTTON 20. GOTO BUTTON 21. ANGLE BUTTON 22. VOLUME - / + BUTTONS 23. STOP BUTTON 24. PLAY BUTTON 25. SETUP BUTTON 26. iPod / DVD BUTTON 27. PREV BUTTON 28. NEXT BUTTON 29. RETURN BUTTON 30. MUTE BUTTON 31. DISPLAY BUTTON 32. VIDEO MODE BUTTON IMPORTANT NOTE: The included remote control both your iPod and DVD player. * NAVIGATION / Buttons = Page Down / Page Up Buttons -7- www.i-Luv.com V10M10_IM_EN_02142008 GETTING STARTED Preparing the Remote Control for Use Installing the Batteries 1. Push down and out on the battery Compartment cover to remove it. 2. Insert two AAA batteries into the battery compartment of the remote control, making sure the polarity (+ and ­ signs) on the batteries and matches the polarity marked inside the battery compartment. 3. Replace the battery compartment cover. Notes: · Do not mix batteries from different manufacturers, nor old ones with new. · If the remote control will not be used for an extended period of time, remove the batteries to prevent damage-causing corrosion. · Remove dead batteries immediately to prevent damage-causing corrosion. · If battery leakage occurs, wipe the battery liquid from the battery compartment, then replace both batteries. Always replace both batteries at the same time, using new, fully charged batteries. · Life expectancy of batteries may vary depending on amount of use. Using the Remote Control 1. 2. 3. 4. Point the remote control directly at the player's remote sensor. Do not leave the remote control in an extremely hot or humid place. Avoid spilling water or put any liquid on the remote control. Battery life is ~1 year under normal conditions. -8- www.i-Luv.com V10M10_IM_EN_02142008 GETTING STARTED Setting up the Player It is recommended that you keep the unit unplugged and disconnected from the wall unit while connecting the unit. Connecting the Unit to a TV Composite Video (iPod and DVD) ­ Connect the video cable from the Video Out jack on the back of the player to the Video In jack on your television set. S-Video (iPod and DVD) ­ For better video quality, connect the player to your television set using an S-Video cable (not included). Connect the cable from the SVideo Out jack on the back of the player to the S-Video In jack on the television set. SCART Video (European version, DVD only) ­ If you connect the unit to your television set using a SCART cable, set the [Video] to TV-RGB. Y, Pb, Pr (DVD only) ­ Use a Component cable (not included) to connect the unit to a television set. Set the [Video] to Interlace YUV. If the television supports Progressive Scan, set the [Video] to P-Scan Y, Pb, Pr. Connecting External Audio The back panel of the iPod/DVD player provides: COAXIAL Out: Connects to an external audio decoder. Note on iPod connections Video connection: Your iPod does not support component (Y, Pb, Pr) video output, so always connect to composite video or S-Video for iPod play. Audio connection: Your iPod does not support 5.1 channel audio output and digital audio output, so always connect to audio FR, FL channels for iPod play. Before plugging the power cord into the AC outlet, check to make sure all of the connections have been properly completed. When they have been, carefully plug power cord into outlet. Press the POWER switch on the rear side to turn on the unit, the power indicator will light up. If unit is in standby state, press the POWER button on the front panel to power the unit. The display panel will light. When the unit is initially powered, a brief surge of electricity may cause interference with other electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different circuit. -9- www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Using Your iPod Before playing iPod, always connect the video to TV through composite video or S-Video, and connect the audio through FR/FL analog audio output. When unit is in iPod play mode, does not support component video output and 5.1 channel / digital audio output. Connecting your iPod to the dock: 1. Connect you iPod to the dock, make sure right dock adapter is installed before docking your iPod into the machine. 2. Turn on the player, Select your iPod using the remote control and press the ENTER button or press the iPod button on the unit. Note: If your iPod is not inserted to dock, a "Please insert iPod" message will display on screen. After inserting your iPod and selecting iPod mode, unit will verify your iPod and the "Initializing..." message will appear on the screen. Please wait until the process finishes. The unit cannot be operated during this time. Playing your iPod contents on TV: When your iPod has been properly verified, the following will be displayed: The supported menu and screen may vary depending on the type of iPod connected to the dock. Select the desired menu and press the ENTER button on the remote control to view the contents on your iPod, Selected the file and press the ENTER button to play the selected music or video. Music Menu: Music menu is sorted by playlists, Artists, Albums, Songs, Genres, or Composers. Use the NAVIGATION / buttons to select a playlist and press ENTER on the remote control to confirm your selection. When music is playing, information on the music will be displayed on the TV screen. - 10 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Using Your iPod­ Continued Video Menu: The Video Menu is sorted by Movie, Music Video, TV shows, and Video podcasts. Press the ENTER button after selecting the desired videos from the list to start playing the selected Video. Press the PAUSE button during playback to pause playback and press the PLAY button to resume play. Press the REV or FWD buttons during playback allow you to move quickly forward or backward. Press the PREV or NEXT buttons during playback to move to the next or previous chapter/movie. Note: iPod touch does not support video browsing, you need to change from "iPod" to "iPod Screen" mode by pressing the iPod MODE button of remote control, using the screen on your iPod touch for video play. Changing the Settings: A variety of options can be changed directly from the TV on the TV Screen during playback. Background color can be changed as well as playback settings like Shuffle, Repeat, Skin, TV System, TV Screen, Caption and Language. Changing the Screen Mode: Press the iPod MODE button while your iPod is searching the contents on the TV to switch to iPod Screen Mode. At this time, the message on the TV screen will disappear, then contents can be searched on your iPod screen using the remote control or click wheel of your iPod. The "iPod Screen" mode is useful for iPod functions not supported by this iPod/DVD player, such as photo playing, iPod touch video playing, and other features. In "iPod Screen" mode, set [TV Out] setting to ON for video playing. Press the iPod MODE button again to return to "TV Screen" mode. Tips for iPod video playing: Before insert your iPod into the dock, you can set your iPod settings for different movie and TV Aspect ratios (4:3 or 16:9), such as TV Screen, Fit to Screen, and Captions. - 11 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS System Setup Press the SETUP button to display the Main menu. Press the NAVIGATION Press the NAVIGATION activate that page. Press the NAVIGATION / / buttons to buttons to highlight the icon of the desired page. button to highlight the desired option. Press the ENTER button or the NAVIGATION screen. button to select from the options that appear on the right of the Navigating the Setup Menu TV SYSTEM Choose the TV System according to the color specifications of your TV. VIDEO According to the output jack of TV set, you can choose S-VIDEO, YUV, PSCAN, YPbPr, or TV RGB. Notes: Only choose PSCAN if your DVD player is connected to a Progressive Scan TV with Y,Cb,Cr cables. Choose TV RGB if the SCART socket is used. - 12 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Navigating the Setup Menu-continued TV TYPE Choose the aspect ratio according to your TV type. (16:9, 4:3LB or 4:3PS) DEFAULT Choose this option to return the unit to factory settings. Language Setup OSD LANGUAGE Highlight the OSD Language option and use the NAVIGATION / / / buttons to choose the language you prefer for the on-screen display. Press the ENTER button to confirm. AUDIO LANGUAGE Highlight the Audio Lang option and use the NAVIGATION you prefer. Press the ENTER button to confirm. If the disc supports the language chosen, audio output will be in the chosen language. / / / buttons to choose the audio language - 13 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Language Setup-continued SUBTITLE LANGUAGE Highlight the Subtitle Lang option and use the NAVIGATION / / / buttons to choose the subtitle language you prefer. Press the ENTER button to confirm. If the disc supports the language chosen, it will display subtitles in that language. MENU LANGUAGE Highlight the Menu Lang option and use the NAVIGATION / / / buttons to choose the menu language you prefer. Press the ENTER button to confirm. If the disc supports the language chosen, the menu will display in the chosen language. If the disc does NOT support the chosen language, the default language programmed into the disc will display. Audio Setup Highlight the Audio Out option using the NAVIGATION / / / buttons to choose the audio output you prefer. Press the ENTER button to confirm. There are three output modes. SPDIF / OFF SPDIF / RAW: Choose this setting if your DVD player is connected to a power amplifier with Dolby digital decoder and Coaxial cable. SPDIF / PCM: Choose this setting if your DVD player is connected to a 2channel digital stereo amplifier. - 14 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Video Setup SCREEN SAVER The Screen Saver protects your screen from damage and is activated when the DVD player is in Stop mode, Open, No-disc state, or when there is a frame frozen for more than 60 seconds. ON: Activates the Screen Saver OFF: Deactivates the Screen Saver Note: The default setting is ON BRIGHTNESS Use the NAVIGATION / buttons to adjust the brightness of the screen. CONTRAST Use the NAVIGATION / buttons to adjust the contrast of the screen. SATURATION Use the NAVIGATION / buttons to adjust the saturation of the screen. - 15 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Speaker Setup DOWNMIX LT / RT: Choose this setting to obtain a movie-theater sound is the original video was recorded with Pro Logic Dolby Digital format. STEREO: Choose this setting when 5.1-Channel sound is playing. 5.1-CH: Choose this option when the player is connected to a 5.1Channel audio amplifier and a 5.1Channel disc is playing. Enjoy Dolby 5.1-Channel Surround Sound. Digital Setup DYNAMIC RANGE When Line Out is selected, choose this setting to adjust the line out ratio for different effects. - 16 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Basic DVD Operation 1. Turn on your TV and your iPod / DVD Player Press the POWER button on the remote control or on the player itself. The iPod/DVD selection interface will display on TV screen. Press the NAVIGATION 2. Place disc in the player Press the OPEN / CLOSE button on the remote control or on the front panel of the player itself. "OPEN" will display on the screen. Carefully place a DVD into the disc tray with the label facing up (doublesided discs have content on both sides and can be placed in any direction). Press the OPEN / CLOSE button again. "CLOSE" will display on the screen. The disc will begin playback immediately. Note: There are some discs which will not play immediately. When this happens, press the PLAY button or ENTER button to initiate playback. 3. Play The contents a disc may vary depending on how it was programmed and what features are offered. Selections made from the menu will only function if the disc is designed for such operation. The following play modes are offered. Menu Play (DVD, SDVD, VCD20) 1. Press the MENU button. o o 2. 3. 4. 5. 6. TV screen displays the DVD root menu when there is a disc loaded. PBC is initialized when an SVCD or VCD2.0 disc is loaded. / buttons to With a DVD loaded, press the NAVIGATION choose the menu item you desire. Press the ENTER or PLAY button to confirm. During DVD playback, press MENU (PBC) button to return to the root menu. During SVCD or VCD playback, when PBC is activated, press the RETURN button to return to the menu. Stop o Press the STOP button once to stop and hold playback. o o Press the PLAY button to resume playback from the place where it stopped. Press the STOP button twice to stop playback completely. Note: for the protection of the disc, press the STOP button before pressing the OPEN / CLOSE button to eject the disc from the tray. After removing the disc from the tray, press the OPEN / CLOSE button to close the disc tray. / buttons to select DVD Press the ENTER button to enter to DVD work mode. - 17 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Basic DVD Operation-continued Title Play (DVDs only) 1. 2. 3. 4. 1. 2. 3. During DVD playback, press the TITLE button to display the DVD title content. Press the NAVIGATION / buttons to select the preferred title. Press the ENTER button to confirm. Playback will begin at Chapter 1 of the title chosen. Press the MENU button once during SVCD or VCD playback (PBC is on) to switch PBC off. The player will enter sequence mode. Press the MENU button twice to switch PBC on. Press the PLAY button when an SVCD or VCD is in Stop mode, to enter Sequence playback.* * This function is not available on all discs. Program Play The Program Play option allows you to program the order in which you want the chapters to play (up to 16). o o Program menu (DVD, MP3, JPEG discs) Program menu (DVD, MP3, JPEG discs) Sequence Play Note: If PBC is on, this operation will turn PBC off while chapters or tracks play in programmed order. o According to the highlight, use the NUMERIC buttons to enter the chapters or tracks in the order you want them to play. Press the PLAY button or use the NAVIGATION play in the programmed order. Note: You can program a maximum of 16 titles, chapters or tracks. o o According to the Direction Indicator on the menu, use the NAVIGATION / / / buttons to highlight your desired entry. During Program Playback, press the PROGRAM button to display the programmed order on the screen. This will also stop the program playback. Press the STOP button or the PLAY button to resume playback. Notes: To clear the programmed order, use the NAVIGATION order, use the NAVIGATION / / / / / / buttons to highlight the "Clear" option. Press the ENTER button to confirm. To modify the programmed buttons to highlight the item you wish to modify and enter the number of the new chapter or track using the NUMERIC buttons. / buttons to highlight the "Play" item and press ENTER. The chapters or tracks will now - 18 - www.i-Luv.com V10M10_IM_EN_02142008 OPERATIONAL INSTRUCTIONS Volume Control Press the VOL + or VOL- buttons to adjust the sound level. Mute Press the MUTE button to temporarily mute the speakers. Press the MUTE button again to resume audio. JPEG / MP3 Playback When a JPEG or an MP3 disc is loaded, the screen will display as follows: Current MP3/JPEG file name. If a JPEG file is playing, the name should have a JPEG extension. Current directory name File Switch Region: Displays the type of file playing and the switching. The Playing file is an MP3 audio file The Playing file is a JPEG audio file 1. 2. 3. Press the NAVIGATION the file window. / buttons to select the file when the cursor appears in Press the ENTER button to play the current file selected by the cursor. Press the NAVIGATION / buttons to switch between the directory window and the file window. Note: The player will not function correctly under the following conditions: o o o The disc is badly scratched, damaged or dirty. The disc is not finalized. The recording format is not supported by the player. - 19 - www.i-Luv.com V10M10_IM_EN_02142008 TROUBLESHOOTING GUIDE iPod Problems - Possible Solutions Can't switch to iPod mode Wait until the iPod has been initiallized. Make sure the iPod is connected securely to the integrated dock. Confirm that your iPod has been recharged with a depleted battery. Upgrade your iPod firmware to the latest version. If the TV screen continues to be frozen for 80 seconds, after inserting your iPod, your iPod has to be reset. Press and hold Menu and Center buttons of your iPod for about six to ten seconds until the Apple logo appears on your iPod screen. When your iPod starts to operating normally again, connect it to i1255. Do not hear any sound from AV Device Make sure the AV device is properly connected to i1255. Make sure the TV or audio amplifier is connected to the FR/FL jacks of i1255. Nothing shows when playing a video Make sure the TV is properly connected to i1255. If connected to S-Video, make sure you have the i1255 set to S-Video mode. To Set up, press the VIDEO MODE button continuously until "S-Video" is displayed on the screen. Confirm that the video output on your iPod has been set to ON. Make sure i1255 video is connected to TV through composite video or S-video jack. The iPod buttons on the remote control don't respond Make sure your iPod is connected securely to the integrated dock. Reset i1255 by taking your iPod out of the integrated clock and putting it back into the integrated dock. Press the iPod/DVD button on the remote control twice to reconnect your iPod. My iPod is frozen Reset your iPod by pressing and holding the ENTER button on your iPod to reset. Refer to the instruction manual for your Ipod itself. DVD Problems - Possible Solutions No power Check to ensure that the power plug is securely in the wall outlet. No sound and POWER switch is turned on. Check the connection between the DVD player and the TV set, amplifier, or any other unit it is connected to. Check to ensure the TV and amplifier are in the correct mode. No picture Check the connection between the DVD player and the TV set or any other unit it is connected to. Check to make sure TV is turned on. Check to make sure TV system or Video mode is correctly set. - 20 - www.i-Luv.com V10M10_IM_EN_02142008 TROUBLESHOOTING GUIDE Disc does not play Check to make sure the disc is loaded correctly label side facing up on disc tray. Check that disc is clean from dirt, dust, fingerprints, and smudges. Check to ensure disc is with in the guides on the tray. Check if parental lock function is on. Make sure disc is for use in region Remote does not work. Check batteries; possibly replace. Check to ensure there isn't any obstacles between the remote sensor on the unit's front panel and the remote control. Be sure the remote is aimed at the remote sensor. Divided picture Check that disc is clean and has no scratches. The unit is controlled by a micro computer, which may need to be reset. Turn off the unit's power, wait several seconds, then turn back on. No Color Picture Check to see if the connector is damaged. - 21 - www.i-Luv.com V10M10_IM_EN_02142008 FEATURES AND SPECIFICATIONS Features for Your iPod · Watch your favorite iPod videos on your TV · Play and charge your iPod with i1255 · Provides full control of your iPod with the included remote control · Navigate your iPod videos or music on your TV screen with convenient OSD (On-Screen Display) specially designed for your iPod · Capable of outputting your favorite videos or music from your iPod to your TV through SVideo or AV output · Integrated dock for your iPod touch, iPod classic (80GB, 160GB), iPod nano 3rd Gen. and iPod with video (30GB, 60GB, 80GB) Features for DVD Player · Watch your favorite DVD videos on your TV through component video output and coaxial digital audio output · Front tray type DVD mechanism · Featured with convenient OSD (On-Screen Display) · Multiple subtitle, angle, and audio functions · Slow- and fast-motion playback and zoom operation · Remote control included · Playable Media: DVD / VCD / MP3 / Audio CD / JPEG / Kodak Picture Specifications · Power Requirement o AC 100V ­ 240V , 60Hz / 50Hz o Power consumption: under 15W · Unit Dimensions (W x H x D): TBD · Unit Weight: TBD * Specifications are subject to change without prior notice. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by the Macrovision Corporation. Reverse engineering or disassembly is prohibited. Apparatus claims of US Patent Nos. 4,631.603; 4,819.098; 5,315.448 and 6,516.132; licensed for limited viewing uses only. - 22 - www.i-Luv.com V10M10_IM_EN_02142008 - 23 - www.i-Luv.com V10M10_IM_EN_02142008 USER SAFETY GUIDE IMPORTANT SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of un-insulated "dangerous voltage" within the unit's cabinet that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating, maintenance and servicing instruction in the manual accompanying the unit. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. CLEANING Always disconnect unit from power supply before attempting to clean it. Use soft cloth moistened with soapy water, and wipe gently. Do not use solvents or abrasive materials. LASER SAFETY This unit uses laser technology. Only a qualified professional should remove the cover or attempt to service this device, due to possible eye injury. CAUTION ­ CLASS 1 LASER PRODUCT Use of controls adjustments and/or performance of procedure other than specified herein may result in hazardous radiation exposure. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION: HAZAROUS LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. - 24 - www.i-Luv.com V10M10_IM_EN_02142008 USER SAFETY GUIDE IMPORTANT SAFETY PRECAUTIONS INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or other forms of re-utilization of old appliances, you make an important contribution to protect the environment. Please inquire at your local community administration for the authorized disposal location. IMPORTANT SAFETY WARNINGS 1. Before using the player, please ensure that your local AC voltage is suitable for this unit. 2. To prevent fire or electric shock, do not expose the unit to water, rain, or moisture. 3. Never attempt to open the cabinet. Dangerous high voltages are present in the unit. 4. Always refer servicing to a qualified technician. IMPORTANT SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS ­ All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS ­ The safety and operating instructions should be retained in a secure place for future reference. 3. HEED WARNINGS ­ All warnings on the appliance and in the operating instructions should be observed. 4. FOLLOW INSTRUCTIONS ­ All operating and use instructions should be followed. 5. WATER AND MOISTURE ­ The appliance should not be used near water. For example: near a bathtub, kitchen sink, laundry tub, and/or swimming pool. 6. VENTILATION ­ The appliance should be situated so that its location and position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings; or, be placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 7. HEAT ­ The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 8. POWER SOURCES ­ The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance itself. 9. POWER CORD PROTECTION ­ Power supply cords should be routed so that they are not likely to be walked on or obstructed by items placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point at which they connect to the appliance. 10. CLEANING ­ The appliance should only be cleaned with a dry cloth. FCC NOTICE (USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. - 25 - www.i-Luv.com V10M10_IM_EN_02142008 USER SAFETY GUIDE IMPORTANT SAFETY INSTRUCTIONS ­ CONTINUED 11. NONUSE PERIODS ­ When the appliance is to be left unused for an extended period of time, unplug from outlet. 12. OBJECT and LIQUID ENTRY ­ Care should be taken so that objects do not fall and liquids are not spilled into the device's openings. 13. DAMAGE REQUIRING SERVICE ­ The appliance should be serviced by qualified service professional when: a. The power supply cord or plug has been damaged. b. Objects have fallen into, or liquid has been spilled into the appliance's apertures. c. The appliance has been exposed to rain. d. The appliance has been dropped and suffered damage. e. The appliance does not appear to operate normally, or exhibits a change in performance. 14. SERVICING ­ The user should not attempt to service the appliance beyond what is described in the user's operating instructions. All other servicing should be referred to qualified service professional. 15. BATTERY USAGE ­ To prevent battery leakage, which may result in bodily injury, property damage or damage to the unit, follow these instructions: a. Install all batteries correctly according to the polarity (+ -) as marked on the unit. b. Do not mix old and new batteries, carbon and alkaline, etc. c. Remove batteries from the unit when the device will not be used for an extended period of time. 16. LEAD AND MERCURY ­ This product may contain lead and/or mercury. Disposal of these materials may be regulated by your local authorities due to environmental considerations. For more detailed disposal or recycling information, please contact your local authorities or the EIA (Electronic Industries Alliance) ­ http://www.eiae.org IC NOTICE (Canada) Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away from the affected radio/television tuner. Note: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television operation (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one of more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. - 26 - www.i-Luv.com V10M10_IM_EN_02142008 - 27 - www.i-Luv.com Visit our website at www.i-Luv.com iLuv is a trademark of jWIN Electronics Corp., and all rights for use of this trademark are reserved and protected by law. All logos and brands are the property of their respective owners. Features and specifications are subject to change without prior notification. iPod is a trademark of Apple Computer, Inc. iPod is not included with this unit. ©2008 jWIN Electronics Corp., All rights reserved. No portion of this printed material or product enclosed herewith including design, shape, and graphics may be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp., by any means electronic or mechanical including photocopying, recording, or use of an information storage retrieval system. Any unauthorized distribution or reproduction of this printed material, or any portion thereof, will be prosecuted to the fullest possible extent of the law. Printed in China