E ENGLISH 2-E Digital Camera >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. User's Manual >> TRADEMARK INFORMATION Microsoft ® and Windows ® are U.S. registered trademarks of Microsoft Corporation. Pentium® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc. SDTM is a trademark. Other names and products may be trademarks or registered trademarks of their respective owners. READ THIS FIRST Notice: 1. Product design and specifications are subject to change without notice. This includes primary product specifications, software, software drivers, and user's manual. This User Manual is a general reference guide for the product. 2. The product and accessories that come with your camera may be different from those described in this manual. This is due to the fact that different retailers often specify slightly different product inclusions and accessories to suit their market requirements, customer demographics, and geographical preferences. Products very often vary between retailers especially with accessories such as batteries, chargers, AC adapters, memory cards, cables, carrying cases/pouches, and language support. Occasionally a retailer will specify a unique product color, appearance, and internal memory capacity. Contact your dealer for precise product definition and included accessories. 3. The illustrations in this manual are for the purpose of explanation and may differ from the actual design of your camera. 4. The manufacturer assumes no liability for any errors or discrepancies in this user manual. 5. For driver updates, refer to our website. E-3 4-E Digital Camera >> WARNING Do not expose the camera to moisture and make sure no water gets into the camera. Take particular care when using the camera under extreme weather conditions, such as rain or snow, or when operating the camera at the beach or near water. Avoid using this camera in places subject to extreme moisture. Do not use the camera if water has entered the camera. Turn the camera off and remove the battery. Contact your dealer or authorized service facility. Do not continue to use the camera as this may cause a fire or an electrical shock. Do not use the camera if any foreign objects have entered the camera. Turn the camera off and remove the battery. Contact your dealer or authorized service facility. Do not continue to use the camera as this may cause a fire or an electrical shock. Do not place the camera in an unstable location such as on a wobbly table or sloping surface where the camera may fall or tip over and cause injury. If the camera has been dropped or damaged, turn the camera off and remove the battery. Contact your dealer or authorized service facility. Do not continue to use the camera as this may cause a fire or an electrical shock. Do not insert or drop metallic or other foreign objects into the camera through access points such as the memory card slot. This may cause a fire or an electrical shock. Do not attempt to modify this camera. Do not remove the camera casing. This may cause a fire or an electrical shock. Internal inspection and repairs should only be carried out by an authorized service facility. Never operate this camera in any way while driving a vehicle. This may cause a traffic accident. A camera is a precision instruments. Please do not drop it, strike it or use excessive force when handling the camera. User's Manual >> CAUTION Do not place this camera in a location affected by oil fumes or steam, such as near a cooking stove or humidifier. This may cause a fire or an electrical shock. Do not leave this camera in a location subject to extremely high temperatures, such as in a sealed vehicle or in direct sunlight. Exposure to high temperatures may adversely affect the camera case and internal components and may cause a fire. Do not cover or wrap the camera with a cloth or quilt. This may cause heat to build up and distort the camera case and cause a fire. Always use the camera and accessories in well-ventilated locations. Do not use the camera to look directly at the sun. There is a danger of injury to the eyes. Do not use battery other than those specified for use with your camera. Use of unsuitable battery may result in the battery splitting, or leaking and may cause a fire, injury, or soiling of the battery compartment. When placing the battery into the camera, check the polarity markings on the battery ( - and + ) to ensure that the battery is inserted correctly. Incorrect battery polarity will result in camera inoperability and may result in the battery splitting or leaking and causing a fire, injury, or soiling of the battery compartment. When the camera is left at low or high temperatures do not touch it with your bare hands. It is possible that you may sustain an injury due to burning. E-5 6-E Digital Camera >> CONTENTS 8 INTRODUCTION 8 10 Overview Package Contents 11 GETTING TO KNOW THE CAMERA 11 12 14 15 Front View Rear View Viewfinder LED Indicator LCD Monitor Icons 17 GETTING STARTED 17 18 19 21 22 23 24 25 26 Attaching the Camera Strap Inserting and Removing the Battery (Optional Accessory) Charging the Battery Inserting and Removing the SD Card (Optional Accessory) Turning the Power On/Off Setting the Date and Time Choosing the Language Formatting the SD Card Setting Image Resolution and Quality 28 PHOTOGRAPHY MODE 28 30 31 32 33 35 36 37 [ ] Still Image Mode Recording Voice Memos Using the Optical Zoom Using the Digital Zoom Setting the Flash Setting the Focus Setting the Self-timer Exposure Compensation/Backlight Correction User's Manual >> 39 [ ] Movie Mode 40 [ 40 41 43 44 45 46 47 48 50 52 ] PLAYBACK MODE Playing Back Still Images Playing Back Video Clips Playing Back Still Images/Video Clips on a TV Attaching Voice Memos Thumbnail Display Zoom Playback Slideshow Display Protecting Images DPOF Settings [ ] Erasing Images 54 MENU OPTIONS 54 57 60 61 62 63 65 Still Image Menu (Picture) Still Image Menu (Function) Movie Menu (Picture) Movie Menu (Function) Playback Menu Setup Menu (In Photography Mode) Setup Menu (In Playback Mode) 67 TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER 68 69 70 Step 1: Installing the USB Driver Step 2: Connecting the Camera to Your Computer Step 3: Downloading Images and Video Files 71 INSTALLING PHOTOSUITE 72 INSTALLING PHOTOVISTA 73 CONNECTING THE CAMERA TO OTHER DEVICES 74 CAMERA SPECIFICATIONS E-7 8-E Digital Camera >> INTRODUCTION Overview Congratulations on your purchase of the new digital camera. Capturing high-quality digital pictures is fast and easy with this state-of-the-art smart camera. Equipped with a 4.2 Mega pixels CCD, this camera is capable of capturing pictures with a resolution of up to 2272 x 1704 pixels. Other cool features provided by the camera include the following: LCD monitor 2.0" LTPS TFT color LCD monitor makes it easy to frame your subject when taking pictures. It also displays the pictures you have taken. Recording media External memory supports SD card up to 512MB. Optical zoom 3x optical lens allows you to take telephotoand wide-angle pictures. Digital zoom 3.6x digital zoom and 3x optical zoom permit zoom photography of up to 10.8 times; 2x and 4x playback captured images to enlarge a selected portion of an image. Flexible flash settings Change the flash setting according to your lighting environment and photography mode setting. Focus mode Photographs can be taken with the distance to the subject set by auto focus, macro or infinity. Self-timer mode Time selectable between 10 seconds, 2 seconds and 10+2 seconds. Capture mode Take different still images including single, a series of 3 images with different exposures, and 3 images continuously. Movie mode Record video clips with voice. User's Manual >> Voice memo - Camera settings Thumbnail display TV and PC connection DPOF settings - A voice memo can be recorded once for 30 seconds at photography mode immediately following a still image captured or at playback mode while viewing the picture. Have more control over picture quality by adjusting the menu options. Display in sets of nine pictures on the LCD monitor for easier and quicker selection of pictures. View pictures on a television monitor or computer while connected to the USB or A/V cable. Allow you to embed printing information on your SD card and to print your images on a DPOF compatible printer by simply inserting it. E-9 10-E Digital Camera >> Package Contents Carefully unpack your camera and ensure that you have the following items. Common Product Components: Digital camera A/V cable User's manual USB cable Software CD-ROM Camera strap Camera pouch Conversion adapter Common (Optional) Accessories: SD card AC power adapter Rechargeable lithium-ion battery Battery charger User's Manual >> GETTING TO KNOW THE CAMERA Front View # Name 1. Shutter button Description 2. 3. 4. 5. 6. 7. 8. 9. Focuses and locks the exposure of the camera when pressed halfway down, and takes the picture when pressed all the way down. POWER button Turns the camera power on and off. Flash Provides flash illumination. Viewfinder window Allows you to frame the subject of the picture. Self-timer LED Blinks red during Self-timer mode until picture is (AF auxiliary light) taken. Speaker Produces camera sounds and plays recorded audio. Lens 3x optical zoom lens allows you to take telephoto and wide-angle pictures. Conversion adapter Allows you to connect the conversion adapter to an AC terminal power adapter to the camera to operate the camera without battery, or to charge rechargeable lithium-ion battery or to connect a USB cable or an A/V cable to the camera. Microphone Records audio clips. E-11 12-E Digital Camera >> Rear View # 1. 2. 3. Name Viewfinder Viewfinder LED Mode switch Description Allows you to frame the subject of the picture. Displays the camera current state. Sets the camera mode. Selects this when taking still images. Selects this when recording video clips. Performs image playback and deletion. Zooms the lens to telephoto position. 4. Zoom in button Zoom out button Zooms the lens to wide-angle position. 5. MENU button Toggles OSD menu on and off. 6. Erase button Allows you to erase the picture. 7. Strap holder 8. SET /Direction button 9. 10. 11. 12. Camera strap attachment. Allows you to scroll through menus and pictures, and then select choices. Battery/SD card cover Allows access to the battery and insert or remove the memory card. Display button Turns the LCD monitor display and live view on and off. Tripod socket Allows tripod mounting. LCD monitor Provides menu information to operate the camera, and previews the picture before taking it and review it afterwards. User's Manual >> SET /Direction button 1 2 5 3 4 # Name 1. SET button 2. button Focus button 3. button Flash button button Self-timer button Description Enters the menu page and confirms the chosen setting. Scrolls upwards. Allows you to choose the appropriate focus setting. Scrolls right. Allows you to choose the appropriate flash setting. Scrolls downwards. Allows you to toggle the self-timer on and off, selects the desired self-timer mode. 4. 5. button Scrolls left. Exposure compensation Allows you to toggle the exposure / Backlight correction button compensation / backlight correction on and off. E-13 ...