User manual JWIN JD-TV108

JD-TV108 P O R TA B L E DV D P L AY E R User Guide · Before attempting to connect, operate or adjust this product, please save and read the User Guide completely. · The style of the product shown in the User Guide may be different from the actual unit due to various models. Playable Format: DVD/DVD R/DVD RW/Audio CD/Kodak Picture CD/JPEG Picture CD/MPEG 4/DviX JDTV108V10M10EN04072005 Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Contents FCC and Safety Information .................... 1 Important Safety Instruction .................. 2 Precautions .............................................. 3 Selecting the Type of Disc for the Type of TV Connected ................................. 4 About This User Guide ........................... 5 1-1 Getting Started .............................. 6 Front View .................................................. 6 Top View .................................................. 6 Right Side View ............................................ 6 Battery Installation for the Remote Control ...... 6 Remote Control .............................................. 7 Connect to External Equipment .................... 8 Input from External Equipment ..................... 9 USB Flash Drive and SD/MMC Card Operation ... 9 Receiving Antenna TV Signal ......................... 10 Receiving TV Signal from Cable ................... 10 How to Use TV Tuner ................................. 10 To Select Preferred Available Channels ..... 11 To Select a SPecific Channel ...................... 11 To Recall Between the Current Channel and the Previous Channel .................................. 11 Frame Advance (Step) ................................. 12 Muting the Player ................................... 12 Using Volume Function .............................. 12 Fast Forward and Backward ..................... 13 Skipping a Chapter Ahead or Back ............ 13 Repeating Viewing .................................... 13 Repeating Sections Between Two Specific Points (A-B Repeats) .................................. 13 Displaying Scene Information .................. 13 Changing Audio Soundtrack Language ...... 14 3D Audio Output Adjustment ...................... 14 Changing Subtitle Languages ...................... 15 Viewing from Different Angles ................... 15 Zooming a Scene During Playback ......... 15 Using a DVD Menu ................................... 15 Searching Scenes During Playback ........ 16 Programming DVD Playback .................. 16 2-2 Audio CD Operation ..................... 17 Basic Playback ........................................... 17 Stopping Playback ................................. 18 Pausing Playback ............................... 18 Muting the Player .................................. 18 Using Volume Function ....................... 18 Displaying Track Information ................. 18 Fast Forward and Backward ................ 18 Skipping a Track Ahead or Back ............ 18 Repeating Playback ...................... 18 2-1 DVD Operation .............................. 12 Basic Playback ....................................... 12 Returning to the Menu Screen .................... 12 Stopping Playback .................................... 12 Pausing Playback ...................................... 12 PORTABLE DVD PLAYER USER GUIDE i Contents Repeating Sections Between Two Specific Times (A-B Repeat) ............................... 19 2 Channel Audio Output Adjustment ........ 19 3D Audio Output Adjustment ................ 19 Searching Music During Playback ........... 20 Programming Music Playback .................. 20 3-2 Audio Setup .................................... 27 Digital Out ................................................. 27 Downmix .................................................. 27 Night Mode ............................................. 28 3-3 Video Setup .................................... 29 Video Output ............................................... 29 TV Aspect ......................................... 29 Brightness ............................................... 30 Contrast .................................................. 31 Hue ............................................................ 31 Saturation .................................................... 32 TV System ............................................. 32 2-3 Kodak and JPEG Picture CDs Operation .............................................. 21 Basic Playback ......................................... 21 Stopping Playback ................................. 22 Pausing Playback ...................................... 22 Zooming Pictures .................................... 22 Displaying Picture Information ................ 22 Skipping a Picture Ahead or Back .......... 22 Repeating Playback ................................. 22 Programming Pictures in Title Menu ............ 22 Changing Slideshow Display ................. 23 3-4 System Setup .................................... 33 Screen Saver .............................................. 33 Angle Mark ................................................. 33 Default ........................................................... 34 4-1 LCD Setting .................................... 35 3 Initial OSD Setting ............................. 24 Major OSD Settings ............................ 24 Panel Setting ............................................. 35 Invert Setting ............................................ 35 Color Setting ............................................. 36 Bright Setting ............................................. 36 3-1 Language Setup ............................. 25 OSD Language .......................................... 25 Audio Language ....................................... 25 Subtitle Language .................................. 26 Menu Language .......................................... 26 5-1 Troubleshooting ........................... 37 5-2 Disc Handling and Maintenance ............................................................. 39 ii PORTABLE DVD PLAYER USER GUIDE FCC and Safety Information CAUTION: Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and disc can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded. (Possible region codes:) This unit employs a laser. Due to possible eye injury, only qualified service personnel should remove the cover or attempt to service this device. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. For the DVD Player with Progressive scan output: `Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of Progressive scan picture problems, it is recommended that the user switch the connection to the "Standard Definition" output. If there are questions regarding our TV set compatibility with this model DVD Player, Please contact our customer service center.' There are 6 regions (also called "locals"). Each DVD player and disc will be played in one region ONLY. 1: Canada, U.S., U.S. Territories 2: Japan, Europe, South Africa, Middle East (including Egypt) 3: Southeast Asia, East Asia (including Hong Kong) 4: Australia, New Zealand, Pacific Islands, Central America, Mexico, South America, Caribbean 5: Former Soviet Union, Indian Subcontinent, Africa (also North Korea, Mongolia) 6: China Never make or change connections with the power switched on. CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER COVER SHIELD) PORTABLE DVD PLAYER USER GUIDE 1 Important Safety Instruction 1. Read and keep these instructions. 2. Pay attention to all warnings. 3. Follow all instructions. 4. Do not use this apparatus near water. 5. Clean only with a damp cloth. 6. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Do not defeat the safety purpose of the polarized-type plug. A polarized plug has two blades with one wider than the other. The wide blade is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 9. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Unplug this apparatus during lighting storms or when unused for long periods of time. 12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way; such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. Ambient Temperature 0~40°C. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that not objects filled with liquids, such as vases, shall be placed on the apparatus. 2 PORTABLE DVD PLAYER USER GUIDE Precautions Please read these precautions before operating the unit. n Power cord protection To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal injury, please observe the following. l l l l Hold the plug firmly when connecting or disconnecting the AC power cord. Keep the AC power cord away from heating appliances. Never put any heavy object on the AC power cord. Do not attempt to repair or modify the AC power cord in any way. n Placement Avoid placing the unit in areas of: l Direct sunlight or heating radiators, or closed automobiles l High temperature (over 35 C) or high humidity (over 90%) l Excessive dust, as the internal parts may be seriously damaged. n Non-use periods When the unit is not being used, turn it off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet. n No fingers or other objects inside l Touching internal parts of the unit is dangerous, and may cause serious damage to the unit. Do not attempt to disassemble the unit. l Do not put any foreign object on the disc tray. n Keep away from water/magnet l Keep the unit away from vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage could occur. l Never bring a magnet or magnetized object near the unit. n Stacking l Place the unit in a horizontal position, and do not place anything heavy on it. n Condensation Moisture may form on the internal lens under the following conditions: l Immediately after a heater has been turned on l In a steamy or very humid room l When the unit is suddenly moved from a cold environment to a warm one. If moisture forms inside the unit, it may not operate properly. In this case, turn on the power and wait about one hour for the moisture to evaporate. nIf there is noise or interference on the TV while a broadcast is being received Depending on the reception condition of your TV (not the JD-TV108), interference may appear on the TV monitor while watching a TV broadcast when the JD-TV108 is left on. This is not a malfunction of the unit or the TV. To watch a TV broadcast without such interference, turn off the unit. PORTABLE DVD PLAYER USER GUIDE 3 Selecting the Type of Disc for the Type of TV Connected Your JD-TV108 is capable of playing DVD discs and having their content viewed on the unit's LCD display, as well as on an external TV. While your JD-TV108 is primarily intended to play NTSC DVDs, it can also play PAL DVDs (NTSC and PAL are video formats); refer to the Quick Guide and to the following information: n Connecting to a Multi-TV System (external) monitor (capable of viewing NTSC and PAL) To View NTSC DVDs on a Multi-TV System Monitor: 1. In the VIDEO SETUP menu (see page 32), be sure the "TV SYSTEM" entry is set for NTSC (the default). 2. Be sure the Multi-TV System (external) Monitor is set to receive NTSC video signals. 3. The video content being played will appear on both the JD-TV108's LCD and on the external monitor. To View PAL DVDs on a Multi-TV System Monitor: 1. In the VIDEO SETUP menu (see page 32), be sure the "TV SYSTEM" entry is set for PAL. 2. Be sure the Multi-TV System (external) Monitor is set to receive PAL video signals. 3. The video content being played will appear on both the JD-TV108's LCD and on the external monitor, but because the unit's LCD cannot display PAL video directly, it will appear without color content. The external monitor will display the PAL content in color. See the NOTE below. To View NTSC DVDs on an NTSC TV Monitor: 1. In the VIDEO SETUP menu (see page 32), be sure the "TV SYSTEM" entry is set for NTSC (the default). 2. Be sure the NTSC Monitor is ready to receive NTSC video signals. 3. The video content being played will appear on both the JD-TV108's LCD and on the external monitor. To View PAL DVDs on a PAL TV Monitor: 1. In the VIDEO SETUP menu (see page 32), be sure the "TV SYSTEM" entry is set for PAL. 2. Be sure the PAL Monitor is set to receive PAL video signals. 3. The video content being played will appear without color on JD-TV108's LCD. The external monitor will display the PAL content in color. See the NOTE below. NOTE: When viewing a PAL DVD on the unit's LCD display (without an external monitor), you must set the VIDEO SETUP menu's "TV SYSTEM" entry to NTSC (not PAL; see page 32). In order for PAL video content to appear in color on the unit's LCD display, it must first be converted to NTSC. As already stated, PAL signals can appear in color on a PAL external monitor when the "TV SYSTEM" is set to PAL, but the same content will then appear in "black and white" on the LCD. n Connecting to an NTSC TV n Connecting to the PAL TV 4 PORTABLE DVD PLAYER USER GUIDE About This User Guide Note: Before attempting to connect, operate or adjust this product, please read and save this User Guide completely. Thank you for buying the Portable DVD Player. Instructions in this User Guide describe mainly the use of the remote control. Buttons with the same or similar marking on your Portable DVD Player itself, have the same functions as those of the remote control. For introduction to the display (Portable DVD Player), buttons (Remote Control), and various connections, please refer to the Quick Guide. The section below covers significant information about the unit's general behavior. Please read carefully. If you wish, you can use the same functions on the remote control. r r r r r 1. 2. r To turn on the DVD player, press Power on the top panel of the player. To switch the player to Stand-by mode, press Power again. press Power. To resume to Play mode, When turning on the DVD Player, the unit directly enters DVD mode. If a disc is already placed on the disc tray, the recorder will start to load the disc right after power is turned on. To switch to other modes, do the following: Mode to toggle through different modes. If there is no disc placed in the recorder, press Stop twice to completely stop DVD playback. If there is a disc placed in the recorder, press Press Mode to toggle through different modes. When pressing Stop once during DVD playback, the player turns to a pre-stop status and Play. memorizes the position where the playback is stopped. To start play from where the playback has been stopped, press r r Press Stop twice to completely stop playback. If an "INVALID KEY" appears on the left top corner of the screen, it indicates that the action is prohibited or not available. PORTABLE DVD PLAYER USER GUIDE 5 1-1 Front View Getting Started Right Side View 1. 2. 2. 1. 2. 3. 4. 5. 6. 7. 3. 4. 8. 9. 5. 6. 1. 2. 3. 4. 5. 6. LCD Screen Speakers Power Indicator Remote Sensor Remote Control Carrier Base Top View 1. 2. 3. 4. 5.6.7. 1. 2. 3. 4. 5. 6. 7. 8. 9. P-SCAN Output Jack PHONES Jack AV OUT Jack AV IN Jack COAXIAL Output Jack USB Port SD/MMC Card Slot DC IN Jack CABLE IN Jack Battery Installation for the Remote Control Insert the battery and match the (+) and (-) on battery to the marks inside the battery compartment. 8. 9.10. 11. 6 PORTABLE DVD PLAYER USER GUIDE + 1. VOLUME(-) Button 2. CHANNEL(+) Button 3. VOLUME(+) Button 4. POWER Button 5. PREVIOUS Button 6. PLAY Button 7. NEXT Button 8. CHANNEL(-) Button 9. TV/DVD Button 10. EJECT Button 11. STOP Button First-time use: Remember to remove the insulating mylar strip from the battery. CR2025 OPEN PUSH 1-1 Getting Started - continued Service life of battery: 1. The battery normally lasts about one year although this depends on how often and for what operations the remote control is used. 2. If the remote control unit fails to work even when it is operated near the player, replace the battery. Use a 3V lithium battery (No. CR2025). 3. Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 11. Pause Button 12. Play Button 13. Fast Forward Button 14. Fast Backward Button 15. LCD Button 16. Mode Button 17. Angle Button 18. Audio Button 19. Title Button 20. Volume(+) Button 21. Cursor Button ( ) 22. Volume(-) Button 23. Search Button 24. Mute Button 25. Stop Button 26. TV Source/Info. Button 27. Channel(-)/Previous Button 28. Channel(+)/Next Button 29. Program Button 30. Repeat Button 31. Number Buttons 29. 30. 31. 1. Setup Button 2. Power Button 3. Subtitle Button 4. Zoom Button 5. Cursor Button ( 6. Menu Button 7. OK Button 8. Cursor Button ( 9. Cursor Button ( 10. Return Button ) ) ) PORTABLE DVD PLAYER USER GUIDE 7 1-1 Getting Started - continued Connect to External Equipment 3 1 Press Power button on the top panel of the unit to turn on the DVD Player. POWER Connect the Portable DVD Player to a source of power. Connect the supplied AC adapter to the DC IN jack on the right side of the unit. 4 2 Connect the unit to external equipment and/or to earphones. If you want to enjoy better listening and viewing quality, you can connect the Portable DVD Player to external equipment, such as a TV or an amplifier. Press Eject button on the top panel of the unit to open the disc cover. Pull the cover forward, if necessary. Gently hold the edge of the disc, then put it in the disc frame with the printed side down. EJECT 5 Green Blue Red Yellow White Red Y Pb Pr Input Video Audio Input Input (Green)(Blue)(Red) (Yellow) (White) (Red) Yellow White Red OR Audio Input (White) (Red) OR Orange · · · Note: Before connecting, make sure to turn off the power on the Portable DVD Player and the external equipment. Make sure the external equipment supports inputs from the JD-TV108. See the Quick Guide. PORTABLE DVD PLAYER USER GUIDE Note: This player doesn't support the 8cm (3.15 in.) disc playback. 6 7 Close the disc cover. Press Play button on the top panel of the unit or Play on the remote control to play the disc. 8 1-1 Getting Started - continued Insert a USB Flash Drive Input from External Equipment You could input images and sounds from external equipment by connecting the portable DVD player to external equipment with the audio or video cable. AV IN Yellow White Red Video Output Audio Output (Yellow) (White) (Red) Insert a SD/MMC Card White Red Audio Output OR (White) (Red) · Note: Make sure the external equipment you wish to use has output connections available for the inputs in the JD-TV108. 3 USB Flash Drive and SD/MMC Card Operation A file list appears on the screen, press Up / Down on the remote control to select a preferred JPEG or MP3 file. Press OK or selected file. Play to play the 1 Insert a USB Flash Drive to the USB port or a SD/MMC card to the card slot on the right panel of the DVD player. Mode button on the remote control to select USB Mode or SD/MMC Card Mode. · 4 2 Press the For Picture File Playback Only · Press Right to rotate the picture clockwise by 90°. · Press Left to rotate the picture anticlockwise by 90°. · · Note: Press Mode a number of times. You can toggle through different modes, including "DVD Mode", "USB", "CARD", "AV IN" and "TV TUNER". Note: Playable formats for the SD/MMC memory card operation include JPEG and MP3. If the JPEG file size is over 1.0MB, it may take more time to read. PORTABLE DVD PLAYER USER GUIDE 9 1-1 Getting Started - continued Receiving Antenna TV Signal You could input images and sounds from external equipment by connecting the portable DVD player to external equipment with the audio or video cable. Telescoping Antenna Outdoor Antenna How to Use TV Tuner · · Make sure that the DVD Player is correctly connected. TV reception quality maybe different due to various areas. 1 2 · Press Power button on the top panel of the unit to turn on the DVD Player. Press Mode to select the "TV Tuner" mode. Note: Press Mode a number of times. You can toggle through different modes, including "DVD Mode", "USB", "CARD", "AV IN" and "TV TUNER". 1 Raise the JD-TV108's telescoping antenna and position the unit so it is set to receive the best TV signals. 3 4 Press TV to select CABLE or ANTENNA as the TV source. Press Search, a TV tuner window appears on the screen. Receiving TV Signal from Cable 1 T Connect the RF cable or antenna cable to the Antenna/Cable TV input jack (ANT.) on the lower right side of the DVD player. Channel 56 Freq 415.3MHz Favorite Yes Auto search Cable TV Antenna 5 6 Press Up / Down to highlight a preferred option. Press Left / Right to select a setting for the highlighted option. see the Quick Guide, page xx NTSC PAL Channel · Press Right to select the next channel or press Left to select the previous channel. 10 PORTABLE DVD PLAYER USER GUIDE 1-1 Getting Started - continued Freq: Right to increase the fre· Press Left to decrease quency or press the frequency for the best tuning. To Select a Specific Channel 1. Press Number Button(s) specify the channel. Note: This function can be applied to all the channels, including those that are set to"No" in the Favorite setting. Favorite: Left / · Press or "No". Right to select "Yes" · Auto search: Right and tuner search starts · Press automatically and allows the channel to be confirmed. · To Recall Between the Current Channel and the Previous Channel · Note: After proceeding with Auto search, the unit will store available TV channels. However, if more channels become available in your area, Auto search may need to be run again to update the available channels. Each time Auto search is run, all the previously stored channels will be erased and replaced. 1. Repeat, the previously Press selected channel can be recalled. 7 To leave the TV tuner window, press Search again. To Select Preferred Available Channels 1. Channel+ Channel- / Press to choose a preferred channel for viewing. Note: This function only works with available channels. If a channel is set to "No" in Favorite setting, the channel will be skipped while pressing Channel+ to toggle through Channel- / channels. · · PORTABLE DVD PLAYER USER GUIDE 11 2-1 Preparations: DVD Operation Connect the Portable DVD Player to a source of Power and connect it to any external equipment if necessary. If external equipment is being used: · Turn the external TV ON and select its video input that is connected to the DVD player's Video Out. · Turn the stereo system on if the DVD recorder's audio output has been connected to it. Stopping Playback 1 2 To prestop the disc playback, press Stop once. To completely stop the disc playback, Stop again. press Basic Playback Pausing Playback 1 2 3 Press Power on the top panel of the player to turn on the player. Press Eject on the top panel of the player to open the disc tray and place a disc into the disc frame. Close the tray. Playback of the disc starts automatically. If the disc contains a title menu, the menu will be displayed on the screen. 1 Press playback. Pause once to pause 2 To return to normal playback, press Play. Frame Advance (Step) 1 Pause to pause playback. Press Pause Then for each press of the button, the disc is advanced by one frame. 4 Up / To play a title, press to highlight it and then press Play. Down OK or 2 To return to normal playback, press Play. Returning to the Menu Screen Muting the Player 1 Press Menu or Return during playback to stop playback and display the title menu. Note: This function only works when the disc contains a title menu. If the disc is placed in upside down (and it is a single sided disc), the player will display "NO DISC". 1 Mute once during playback Press to mute the audio output. To resume the sound, press again. Mute 2 · · Using Volume Function 1 Press Volume during playback to adjust volume. 12 PORTABLE DVD PLAYER USER GUIDE 2-1 DVD Operation - continued Fast Forward and Backward 2 1 Press Fast Forward or Backward during playback. The speed of advance (FORWARD Fast x2, FORWARD REP: REP: REP: Right repeatedly to select the Press following options: [ CHAPTER ] : Repeat Chapter [ TITLE ] : Repeat Title [ OFF ] : Repeat Off x4, FORWARD x8 and FORWARD x20) or reverse (FORWARD x2, FORWARD x4, FORWARD x20) changes for each press of x8 and FORWARD Fast Forward or Fast Backward. Repeating Sections Between Two Specific Points (A-B Repeat) 2 To return to normal playback, press Play. 1 Skipping a Chapter Ahead or Back Skipping Ahead LEFT REP AB RIGHT REP DISC Repeat during playback, Press and a repeat information box appears on the screen. 2 1 Press Press Next during playback. Next once midway through a chapter, and Left during playback at the Press point where the repeating section will be started (A). REPEAT Aappears on the screen. playback will start from the next chapter. A chapter is skipped each time the button is pressed. 3 Left again at the point where Press the repeating section will be ended (B). REPEAT A-B appears on the screen. Skipping Back 1 Press Press Prev. during playback. Prev. once midway through a chapter, 4 To return to normal playback, press Left again during the repeat playback. A-B CANCEL appears on the screen. and playback will start from the previous chapter. A chapter is skipped each time the button is pressed. Displaying Scene Information Repeat Viewing 1 1 LEFT REP AB RIGHT REP DISC Repeat during playback, a Press repeat information box appears on the screen. Info. during playback, an Press information display appears on the top of the screen and shows the information of Title, Chapter and Time. 2 Info. again. Information relating Press to Audio, Subtitles and Angle is shown. To stop displaying scene information, Info. again. press PORTABLE DVD PLAYER USER GUIDE 3 13 2-1 DVD Operation - continued Changing Audio Soundtrack Language 1 For Surround (SRND) · Press Up / Down to select an option and press OK to confirm. Audio during playback. An Press audio display appears at the top of SRND EQ BAND KEY the screen. OFF To change audio soundtrack languages, Left a number of times until a press preferred language is selected. CONCERT CHURCH PASSIVE WIDE LIVE 2 When no audio languages are recorded, "INVALID KEY" will be displayed instead of the language choices. Note: This operation functions only with discs on which multiple audio soundtrack languages are recorded. When the preferred language is not selected even after pressing the button several times, it may indicate that language is not available on the disc. When you turn on or remove the disc, the Portable DVD player will playback the language selected at the initial setting. If you select a language which is not recorded on the disc, the Portable DVD player will playback a prior language programmed on the disc. For EQ Up / · Press option and press SRND EQ BAND Down to select an OK to confirm. KEY · · STANDARD CLASSIC ROCK JAZZ POP USER · For BAND · A frequency chat will be displayed as a musical file is played. SRND EQ BAND KEY 3D Audio Output Adjustment 1 Audio during playback. A Press audio display appears on the top of the screen. To adjust the 3D sound effects of audio Right to enter the 3D output, press Audio Menu. For KEY Up / · Press option and press SRND EQ BAND 2 3 Down to select an OK to confirm. KEY 4 2 0 2 4 Left / Press sound feature. Right to select a Note: Some or all of the following features may not be supported. If so, an "INVALID KEY" response will appear. 14 PORTABLE DVD PLAYER USER GUIDE 2-1 DVD Operation - continued · Changing Subtitle Languages 1 Press Subtitle during playback. The viewing angles are shown on the player's display and you can select one from them for viewing. 2 Subtitle a number of times until Press the preferred language is selected. When no subtitles are recorded, "INVALID KEY" will be displayed instead of the language number. Zooming a Scene During Playback 1 3 To clear the subtitle display, press : [ OFF ] Subtitle until appears on the screen. Note: This operation works only with discs on which multiple subtitle languages are recorded. When the preferred subtitle language is not selected even after pressing the button several times, it may indicate that the language is not available on the disc. In some cases, the subtitle language may not change immediately to the selected one. When you turn on or remove the disc, Portable DVD player will playback the subtitle language which is selected as the initial setting. If you select a subtitle language which is not recorded on the disc, the Portable DVD player will playback a prior subtitle language programmed on the disc. Press Zoom a number of times during playback to watch the scene with different enlargements of Zoom 2, Zoom 3, Zoom 4, Zoom 1/2, Zoom 1/3 and Zoom 1/4. To return to normal playback, press Zoom a number of times until ZOOM: [ OFF ] appears. 2 · · Using a DVD Menu · · 1 2 3 4 Title in stop mode. The Press available DVD menu appears on the screen. Up / Down Press Left / Right to select a preferred option. Press OK to confirm and enter the menu screen of the selected option. To return to the previous menu screen, Title. press Viewing from Different Angles 1 Press Angle during playback. 2 · Angle a number of times until Press the preferred viewing angle is selected. Note: This operation works only with discs on which multiple viewing angles are recorded. PORTABLE DVD PLAYER USER GUIDE 15 2-1 DVD Operation - continued Searching Scenes During Playback 3 1