User manual JWIN JL-204

AC POWER OPERATION Before connecting to the power supply ensure that the supply corresponds to the information on the rating label on the bottom of the apparatus. WARNING Disconnect the mains plug form the supply socket when not in use. To avoid the risk of electric shock do not remove the cover of the apparatus. There are no user serviceable parts inside. To prevent fire or shock hazard do not expose the apparatus to rain or moisture. CLOCK 1. Set the ON/OFF/AUTO Switch (1) to "OFF" Connect the Mains Cord to the power supply. The clock display will flash on and off indicating a power interruption and that the display time is incorrect. 2. To set the correct time, press the CLOCK SET Button (14) and MINUTE SET Button (13). or HOUR SET Button (9), together, until the correct time is displayed. 3. Open the Clock Battery Compartment door and fit a 9V battery. The purpose of this battery is to store the information relating to alarm time. And to keep the clock functioning in the event of disconnection from the mains supply or power interruption. Should this occur. The clock will continue to keep time, but will not display. TO SET OR RESET THE ALARM TIME 1. Press and hold the WAKE SET button (8). 2. While holding the WAKE SET button (8) press the HOUR SET Button (9) and MINUTE SET buttons (13) to advance the time until the desired alarm time is shown on the display. 1. ON/OFF/AUTO 2. SLEEP SET 3. AUTO INDICATOR 4. POINTER 5. LED DISPLAY 6. AC CORD 7. SNOOZE/SLEEP OFF 8. WAKE SET/ALARM OFF 9. HOUR SET 10.TUNING CONTROL 11.WAVE BAND 12.VOLUME CONTROL/ BUZZ 13.MINUTE SET 14.CLOCK SET 15.FM ANTENNA WIRE 16.BATTERY BACK-UP TO SET THE ALARM TO WAKE TO RADIO 1. Set the alarm time as previously instructed. Select a radio station and make sure the VOLUME is set as desired. 2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When the actual time matches the selected preset alarm time, the unit automatically turns on for 1 hour and 59 minutes and then shuts off. Notes: - To shut off the alarm, press the ALARM OFF button (8) once and alarm time will be reset for the next day. Slide the ON/OFF/AUTO switch to the OFF position to turn off alarm and not set it for the next day. - The radio can be temporarily turned off manually by pressing the SNOOZE button (7) ; the radio will turn back on automatically 9 minutes later. TO SET THE ALARM TO WAKE TO BUZZER 1. Set the alarm time as previously instructed. Slide the VOLUME/ BUZZER(12) Knob to the BUZZER position; a click is heard and the buzzer will now be activated. 2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When the actual time matches the selected preset alarm time, the unit automatically turns on for 1 hour and 59 minutes and then shuts off. TO SHUT ALARM OFF 1. To shut off the alarm. press the ALARM OFF button (8) once and alarm time will be reset for the next day. Slide the ON/OFF/AUTO switch (1) to the OFF position to turn off alarm and not set it for the next day. SNOOZE FUNCTION 1. The alarm can be temporarily turned off manually by pressing the SNOOZE button (7) ; the buzzer will turn back on automatically 9 minutes later. SLEEP 1. Set the ON/OFF/AUTO Switch (1) to "OFF" or "AUTO". 2. Press the Sleep Set Button (2) and Minute Set Button (13) together. The sleep time will be displayed and count down from 59 minutes to zero. Release the buttons when the required sleep time is displayed. 3. The radio will now operate until the sleep time has elapsed or may be switched off by pressing the Snooze/Sleep Off Button(7). RADIO The AM bands use an internal directional serial. Rotate the radio for best reception. For best FM reception ensure that the FM cord antenna is completely uncoiled and extended. Rear side of cabinet. 1. Set the ON/OFF/AUTO/Switch (1) "ON" position. 2. Set the Waveband Switch (11) to the required waveband. 3. Adjust the Tuning Control (10) to select the desired station. 4. Adjusr the Volume Comtrol (12) is required. 5. To turn off the radio, set the ON/OFF/AUTO Switch to (1) "OFF". If the radio does not switch off this may be caused by inadvertent operation of the Sleep Set Button (2) To cancel this press the Snooze/Sleep Off Button (7) once. SPECIFICATIONS Frequency range Output power Speaker impedance Battery backup Power source Dripping warning : AM530 ­ 1600 KHz FM88 ­ 108 MHz : 400mW : 8 ohm : 9V Battery (for clock) : AC 230 v~ 50Hz, 5 Wattes : "The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the products." : "The normal ventilation of the product shall not be impeded for intended use." Ventilation warning