MP3 PERSONAL COMPACT DISC PLAYER WITH 45-SECOND DIGITAL ANTI SKIP PROTECTION MODEL # JX-CD900 BEFORE OPERATING THIS PRODUCT PLEASE READ THESE INSTRUCTIONS COMPLETELY OPERATING INSTRUCTIONS TABLE OF CONTENTS WARNINGS AND PRECAUTIONS..............................................................................................................P. 1 LOCATION OF CONTROLS.............................................................................................. ......................P.2 CONTROLS....................................................................................................................P.3 POWER SUPPLY / LINE OUT.......................................................................................P.4-P.5 HEADPHONES................................................................................................................P.5 MAINTENANCE...............................................................................................................P.6 IN-CAR CONNECTION.....................................................................................................P.7 CD PLAY..................................................................................................................P.8-P.9 FEATURES..............................................................................................................P.9 -P.11 MP3-CD PLAYBACK...... ..........................................................................................P.12-P.15 TROUBLESHOOTING..............................................................................................P.16-P.17 LIMITED WARRANTY.....................................................................................................P.18 · Places subject to constant vibration. · Humid or moist places. LOCATION OF CONTROLS 3 4 5 6 78 12 WARNINGS TO REVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol is intended to alert the user to the presence of uninsulated " dangerous voltage " within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the prese nce of important operating and maintenance ( servicing ) instructions in the literature accompanying the appliance. This product utilizes a Class 1 laser to read Compact Discs. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player's lid is open and the system's interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches. Any use of the controls or an adjustment to the procedures other than those specified herein may result in hazardous radiation. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK ). THERE ARE NO USER-SERVICEABLE PARTS INSIDE. PLEASE REFER ANY SERVICING TO QUALIFIED SERVICE PERSONEL. · · · · · · · 9 10 11 12 PRECAUTIONS Do not open the CD compartment while the CD is rotating. Always keep the CD compartment closed when not in use. Keep all foreign objects out of the CD compartment. If TV or radio interference occurs during operation, move the unit to a different location within the room or building. Place the unit on a stable surface. A vibration or shock to the unit can cause the CD mechanism to mistrack or skip. If operating the unit under circumstances, which may subject the unit to these conditions, utilize the digital Anti -shock. Playing some CD's at high volume can cause vibration leading to mistracking. In this case, lower the volume or relocate the speakers further away from the unit. Avoid installing the unit in the locations described below: · Where it will be in direct contact with water. · Where it will be in direct contact with a magnet. . · Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters · On top of stereo equipment that radiates too much heat. · Places lacking ventilation or dusty places. 19 18 17 16 15 14 13 The player complies with the FCC- Rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 1 CONTROLS Key Normal Mode No. 1. Battery compartment 2. +SKIP/SEARCH Key Operation Install Battery CD Audio: skips or fast search tracks forwards MP3: skips or search a previous track or album (AL) Selects the different playing possibilities: RANDOM, INTRO, REPEAT ALL and REPEAT 1 LCD Function Display 3, G, H, I Search Mode POWER SUPPLY Batteries (not included) With this set you can use: l Alkaline batteries (type LR6, UM3 or AA) Inserting batteries 1. Open the battery compartment and insert 2 alkaline batteries. Follow the polarity as indicated in the battery compartment. Notes: - Old and new or different types of batteries Should not be used in combination. - Remove batteries if they are empty or if the Set will not be used for a long time. 3. PLAY MODE 4. 5. 6. 7. 8. 9. Display Window PROGRAM ESP PLAY/ PAUSE DC INPUT JACK LINE OUT JACK 5, M, N, O 10. PHONE JACK 11. VOLUME 12. DBBS SWITCH 13. STOP 14. 15. 16. 17. 18. FILE SEARCH DISPLAY OPEN SWITCH FILE/DIR. RESUME 19. ­SKIP/ SEARCH Enter program mode 6, P, Q, R, S ELECTRONIC SKIP PORTECTION ensures 7, T, U, V continuous playback regardless of vibrations and shocks Switches the set on, starts and interrupts CD 1, A, B, C play Jack for 4.5V external power supply 3.5mm line out jack to connect the set to an audio input of an additional appliance 3.5mm headphone and remote control jack Adjusts the volume DYNAMIC BASS BOOST switches the bass enhancement on/off Stops CD play, eases a program and switches 2, D, E, F the set off MP- 3 File Search "Enter" MP- 3 Display Select 0, "clear" Opens the CD lid MP- 3 Select 9, "Space" CD Audio: stores and continues playback from 8, W, X, Y, Z the last track MP3: stores and continues playback from the last track played CD Audio: skips or fast search tracks 4, J, K, L backwards MP3: skips or search a next track or album (AL) Batteries contain chemical substances, so they should be disposed of properly. Indication of empty batteries l A flashing "LOW BATTERY" indication appears on the display when the battery need to be changed. Replace the batteries or connect the power adapter. Notes: The average playing time of batteries under normal condition. Battery type CD Normal CD Alkaline MP3 Normal MP3 Alkaline ESP on 3 hours 6 hours 4 hours 10 hours ESP off 4 hours 7 hours N/A N/A CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure. 2 3 POWER SUPPLY/LINE OUT Power adapter (supplied or optionally available) Only use the 4.5V/600mA direct current, positive pole to center pin power adapter. Any other adapter may damage the set. 1 2 Make sure the local voltage corresponds to the adapter's voltage. Connect the power adapter to the 4.5V DC jack of the player and to the wall outlet. CD player and CD handling l l Do not touch the lens of the player. Do not expose the set, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). You can clean the CD player with a soft, slightly dampened lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect. To clean the CD, wipe it in a straight line from the center toward the edge using a soft, line-free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it. The lens may cloud over when the set is moved suddenly from cold to warm surroundings. Playing a CD is not possible then. Leave the CD player in a warm environment until the moisture evaporates. Active mobile phones in the vicinity of the CD player may cause malfunctions. Avoid dropping the set as this may cause damage. l Note: Always disconnect the adapter when you are not using it. Line out You can connect the CD player to an additional appliance. E.g. amplifier, radio cassette recorder, etc., with a LINE IN jack. 1 2 Turn down the volume on the additional appliance. l l To Line Out To CD / AUX INPUT l l Connect an audio signal cable (not supplied,) to the LINE OUT jack of the CD player and the CD IN, AUX IN or LINE IN jack of the additional appliance. To adjust the sound and volume, use the controls on the connected appliance. 3 HEADPHONES Connecting the headphone l Connect the supplied headphones into the PHONE (GREEN) socket. Environmental information l All redundant packing material has been omitted. We have done our utmost to make the packaging easily s eparable into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your set consists of materials, which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, dead batteries and old equipment. Use your head when using headphones l l Hearing safety: Do not play your headset at a high volume. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce the volume or discontinue use. Traffic safety: Don not use while operating a motorized vehicle. It my create a traffic hazard and it's illegal in may areas. You should use extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headset is an open-air type designed to let you hear outside sounds, don't turn up the volume so high that you can't hear what's around you. l 4 5 IN-CAR CONNECTION CD PLAY In-car use (connections supplied or optionally available) Playing a CD Only use the car voltage converter (4.5V, DC, positive pole to the center pin) and the car adapter cassette. Any other product may damage the set. 1 Put the CD player on a horizontal, vibration-free and stable surface. Make sure it is a safe place, where the player is not a danger or obstacle to the driver and passengers. Connect the DC plug of the voltage converter to the 4.5V DC jack of the CD player (only for a 12V car battery, negative grounding). To DC IN Jack This CD player can play all kinds of Audio Discs and MP3 CD- ROM such as CD Recordables and CD Rewritables. Do not try to play a Cdi, CDV or computer CD or DVD. 1 Push the OPEN slider and the lid opens. The " Door Open" indicator will appear in LCD. Insert an audio CD, printed side up, by pressing gently on the CD center so that it fits onto the hub. Close the lid by pressing it down on the left side. Press PLAY/PAUSE button for approximately 1 second to switch t he set on and start playback. The current track number and the elapsed playing time are displayed. It will take approx. 5 seconds for a CD to begin playback. You can interrupt playback by pressing PLAY/PAUSE button. The time where playback was interrupted is flashing. l 5 Carefully insert the adapter cassette into the car radio's cassette compartment. Car Cassette 2 2 3 3 4 Insert the voltage converter into the cigarette lighter jack. If necessary, clean the cigarette lighter jack to obtain a good electrical contact. Turn down the volume and connect the adapter cassette plug to the LINE OUT of the CD player. l Continue playback by pressing PLAY/PAUSE button again. 4 De ck Press STOP button to stop playback. The total number of tracks and the total playing time of the CD are displayed. Press STOP button again to switch off the set. To remove the CD, hold it by its edge and press the hub gently while lifting the CD. C e as s t te To 5 6 6 7 l Make sure the cord does not hinder your driving. Start the CD player, set VOL to the lower position and adjust the sound with the car radio controls. Always remove the voltage converter from the cigarette lighter jack when the CD player is not in use. · Avoid excessive heat from the car heating or from direct sunlight (e.g. in a parked car in the summer). If your car radio has a LINE IN jack, use the LINE IN jack for the car radio connection instead of the adapter cassette. Connect the signal lead to this LINE IN jack and the LINE OUT jack of the CD player. 6 Notes: When the unit is turned on, the "ESP" function is automatically turned on, and shown on display "ESP". If ESP function is not required, please press ESP button to turn it off. 7 2 Note: Release the button when you reach the desired passage. Normal playback continues from this very position. During SCAN, searching is not possible. CD PLAY Playback information l l l l If a CD Rewritable (CD Recordable) is not recorded properly. "Disc Error" is displayed. For CD Audio, use FINALIZE on your CD recorder to complete the ...