DIGITAL PIANO CL30 OWNER'S MANUAL Thank you for choosing this Kawai CL30 Digital Piano. Your new CL30 is a high-quality instrument offering the very latest in leading-edge music technology. This manual contains valuable information that will help you make full use of your CL30 piano's many capabilities. Please read it carefully and keep it handy for further reference. TABLE OF CONTENTS Page Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembling The Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1. Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2. Dual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4. Concert Magic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5. Demonstration Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 6. Using the Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Function Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 1. Selecting A Touch Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2. Transpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3. Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4. Reverb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5. Concert Magic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 6. MIDI Channel Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 7. MIDI Local Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 8. Turning Multi-Timbral Mode On/Off . . . . . . . . . . . . . . . . . . . 26 9. Transmit MIDI Program Change . . . . . . . . . . . . . . . . . . . . . . 27 MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Concert Magic Song List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Program Change Number Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 MIDI Implementation Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 ­2­ Important Safety Instructions SAVE THESE INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. AVIS : RISQUE DE CHOC ELECTRIQUE The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - NE PAS OUVRIR. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the leterature accompanying the product. Examples of Picture Symbols denotes that care should be taken. The example instructs the user to take care not to allow fingers to be trapped. denotes a prohibited operation. The example instructs that disassembly of the product is prohibited. denotes an operation that should be carried out. The example instructs the user to remove the power cord plug from the AC outlet. Read all the instructions before using the product. WARNING - When using electric products, basic precautions should always be followed, including the following. potential could result in death WARNING Indicates ainjury if thehazard thathandled incorrectly. or serious product is The product should be connected to an AC outlet of the specified voltage. 120V 230V 240V G If you are going to use an AC power cord, make sure that its has the correct plug shape and conforms to the specified power voltage. G Failure to do so may result in fire. Do not insert or disconnect the power cord plug with wet hands. Doing so may cause electric shock. The chair must be used properly (it must be used only when playing the product). G Do not play with it or stand on it. G Only one person is allowed to sit on it. G Do not sit on it when opening the lid. G Re-tighten the bolts occasionally. Doing so may cause the chair to fall over or your fingers to be trapped, resulting in injury. ­3­ When using the headphones, do not listen for long periods of time at high volume levels. Doing so may result in hearing problems. Do not lean against the keyboard. Doing so may cause the product to fall over, resulting in injury. Do not disassemble, repair or modify the product. Doing so may result in product breakdown, electric shock or short-circuit. When disconnecting the AC power cord's plug, always hold the plug and pull it to remove it. The product is not completely disconnected from the power supply even when the power switch is turned off. If the product will not be used for a long time, unplug the AC power cord from the AC outlet. G Pulling the AC power cord itself may damage the cord, causing a fire, electric shock or short-circuit. G Failure to do so may cause fire in case of lightning. G Failure to do so may over-heat the product, resulting in fire. This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety purpose of the plug. It is a good practice to have the instrument near the AC outlet and the power cord plug in a position so that it can readily be disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a power switch off conditiion. potential hazard that or damage CAUTION Indicates a to the product or othercould result in injury Do not use the product in the following areas. G Areas, such as those near windows, where the product is exposed to direct sunlight G Extremely hot areas, such as near a heater G Extremely cold areas, such as outside G Extremely humid areas G Areas where a large amount of sand or dust is present G Areas where the product is exposed to excessive vibrations Using the product in such areas may result in product breakdown. Use the product only in moderate climates (not in tropical climates). Before connecting cords, make sure that the power to this product and other devices is turned OFF. Take care not to allow any foreign matter to enter the product. OFF Failure to do so may cause breakdown of this product and other devices. Entry of water, needles or hair pins may result in breakdown or short-circuit. The product shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the product. Please lift up the product when moving it. Please note that the product is heavy and must be carried by more than two persons. Dropping the product may result in breakdown. Do not drag the product on the floor. Take care not to drop the product. ­4­ Do not place the product near electrical appliances such as TVs and radios. G Doing so may cause the product to generate noise. G If the product generates noise, move the product sufficiently away from the electrical appliance or connect it to another AC outlet. Failure to do so may damage them, resulting in fire, electric shock or short-circuit. When connecting the AC power cord and other cords, take care not to get them tangled. Do not wipe the product with benzene or thinner. G Doing so may result in discoloration or deformation of the product. G When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product. Do not stand on the product or exert excessive force. G Doing so may cause the product to become deformed or fall over, resulting in breakdown or injury. The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation. Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc. Do not place naked flame sources, such as lighted candles on the product. The product should be serviced by qualified service personnel when: G The power supply cord or the plug has been damaged. G Objects have fallen, or liquid has been spilled into the product. G The product has been exposed to rain. G The product does not appear to operate normally or exhibits a marked change in performance. G The product has been dropped, or the enclosure damaged. Notes on Repair Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then contact the shop from which the product was purchased. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. Instruction for AC power cord (U.K.) Do not plug either terminal of the power cord to the ground of the AC outlet on the wall. An information on Disposal for users If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose of it separately by taking it to an appropriate collection point. You should not mix it with general household waste. Disposing of this product correctly will prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. For further details, please contact your local authority. (European Union only) ­5­ THANK YOU FOR PURCHASING A KAWAI DIGITAL PIANO! The Kawai digital piano is a revolutionary new keyboard instrument that combines the latest in electronic advances with traditional craftsmanship inherited from Kawai's many years of experience in building fine pianos. Its keyboard provides the touch response and full dynamic range required for a superb performance on the piano, harpsichord, organ, and other instruments. In addition, the CL piano is equipped with reverb and a digital effect processor for an even fuller sound. IndustryStandard MIDI (Musical Instrument Digital Interface) jacks are included which allow you to play other electronic instruments at the same time--opening a whole new world of musical possibilities. This Owner's Manual contains valuable information that will help you make full use of this instrument's many capabilities. Please read all sections carefully and keep this manual handy for further reference. ­6­ ASSEMBLING THE STAND READ ME FIRST Before beginning the assembly of your CL30 read and become familiar with the assembly instructions that follow. Then, carefully unpack the piano and check your unit against the parts list. PARTS PROVIDED Main Unit (A) Back Panel (C) Arm (E) Screw (c) (M6 x 65) Screw (e) (M6 x 25) Adjuster (G) Power Cord (I) 1pc. 1 pc. 2 pcs. 4 pcs. 4pcs. 1 pc. 1pc. Side Panel (B) Pedal Board (D) Music Rack (F) Screw (d) (M6 x 35) Screw (f) (ø4 x 16) AC Adapter (H) Caps(J) Headphone Hook Screw (ø4 x 14) 2 pcs. 1pc. 1pc. 4 pcs. 2 pcs. 1 pc. 8pcs. 1 pc. 2pcs. (A) (C) Left (E) Right (D) Left Right (B) (F) (H) (I) (J) (c) (d) (e) (f) ­7­ (G) Be sure that all parts are included before starting to assemble your unit. CAUTION! Be sure to assemble CL30 by two persons and being care for carrying the Main Unit at level. 1. Insert the adjuster into about 1 cm on the bottom of the Pedal Board. 2. Undo and pull out the Pedal cord on the back of the Pedal Board. Adjuster Hole (Back of the Pedal board) Front 3. Place the Side Boards beside the Pedal Board on the floor with its back sides facing down. Fix the screws (a) (b) sliding into the metal fittings on the both sides of the Pedal Board. Side Panel (B) Screws( f ) ø 4 x 16 Back Pedal Board (D) Pedal Board (D) Screws( c ) M6 x 65 Back Panel (C) Adjuster (G) 4. Fasten Side Panel and Back Panel with two screws(c) tightly. 5. Fasten screws (a) (b) and then screw (f) tightly. 6. Raise up t ...