STEREO CASSETTE DECK CT/KXF-W SERIES CT-203 CT-2050 KXF-W4010 KXF-W6010 INSTRUCTION MANUAL KENWOOD CORPORATION This manual contains instructions for four models. Model availability and features (functions) may differ depending on country and sales area. SI DICHIARA CHE : gli apparecchi Sintonizzatori per casa Kenwood modelli KT-2080, KT-3080 rispondono alle prescrizioni dell'art. 2 comma 1 del D.M. 28 agosto 1995, n. 548. Fatto a Milano il 15 febbraio 1996 Kenwood Electronics Italia S.p.A. - via G. Sirtori, 7/9 - 20129 Milano B60-3706-00 HZ ( K, P, T, M, X, Y ) ID 99/3 2 1 98/12 11 10 9 8 7 6 5 4 3 Introduction CT-2050/203/KXF-W6010/W4010 (En/M) 2 Before applying power Units are designed for operation as follows. Caution : Read this section carefully to ensure safe operation. U.S.A. and Canada ................................................................ AC 120 V only Australia .................................................................................. AC 240 V only Europe and U.K. ..................................................................... AC 230 V only *Other countries ............................ AC 110-120 / 220-240 V switchable Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : Read this section carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. Introduction CT-2050/203/KXF-W6010/W4010 (En/M) Special features Dolby HX pro and Auto-Bias function DPSS function ¶ The Dolby HX pro headroom extension and auto-bias function provide a recording with superior high-frequency characterisitics. ¶Simple operations allow you to use the following convenient functions. 1 Skip Play 2 Rewind & Play 3 Single-tune repeated playback 4 Dash & Play (DPSS: Direct program Search System) ¶This function automatically stes the optimum recording level of the disc to be recorded, making it easy to record a CD. (CCRS: Computer-Controlled CD Recording System) ¶ With an easy operation, the tape loaded in deck A can be dubbed onto the tape in deck B. making it easy to record a CD. 3 CCRS function Dubbing function Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future. Keep this manual handy for future reference. Accessories Check that the following accessories are present. Audio cord ........................ (2) System control cord ............ (1) Contents Caution: Read the pages marked carefully to ensure safe operation. Introduction .................................................................. 2 Before applying power ....................................................... 2 Safety precautions .............................................................. 2 Special features ................................................................... 3 Normal recording .............................................................. 16 Relay recording (CT-2050/KXF-W6010 only) ........... 19 Relay recording .................................................................. 19 Tape dubbing operation (Deck A \ Deck B) ................ 20 Tape dubbing ..................................................................... 20 Important items ........................................................... 4 Maintenance ........................................................................ 4 Reference ............................................................................. 4 Convenient CD recording (CT-203/KXF-W4010; Deck B only) ......................................................................... 21 CD synchro recording ....................................................... 21 Recording of CD playback (CCRS)(Deck B only) ............. 22 System connections .................................................... 6 Controls and indicators ............................................... 8 Preparation for playback (recording) ....................... 10 Playback (recording) preparation .................................... 10 Timer operations ........................................................ 23 Timer playback of tape ...................................................... 23 Timer recording of tuner broadcast(CT-203/KXF-W4010; Deck B only) ....................................................................... 24 Listening to cassette tapes ....................................... 11 Normal playback ............................................................... 11 Relay playback ................................................................... 12 Convenient music search (DPSS) ............................. 14 Skip play operation ........................................................... 14 Rewind & Play operation .................................................. 15 Single-tune repeated playback operation ....................... 15 Dash & Play operation ...................................................... 15 In case of difficulty ..................................................... 25 Glossary ...................................................................... 27 Specifications ............................................................. 28 How to record (CT-203/KXF-W4010; Deck B only) .. 16 Important items CT-2050/203/KXF-W6010/W4010 (En/M) 4 Maintenance Cleaning Unplug this appliance from the wall outlet before cleaning. Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. Caution against contact revitalizer Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic componente. Cleaning the head section Cleaning the heads and peripheral components Cotton swab Capstan Demagnetizing the head When the recording/playback head is magnetized, the sound quality will be deteriorated. In such a case, demagnetize the head using a commercially available demagnetizer (head eraser). Head Pinch roller Tape guides For maintaining the best condition of the deck and for longer service life, always keep the head (recording/playback/erase), capstan and pinch roller clean. To clean them, perform the following: 1. Open the cassette holder. 2. Using a cotton swab dipped in alcohol, clean the head (recording/playback/erase), capstan and pinch roller carefully. Note There are precisely aligned parts around the heads, including the tape guides. When cleaning, pay special attention so as not to apply shock to them. Reference Caution on condensation Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours with the power left ON, and restart the operation after the condensation has dried up. Be specially cautions against condensation in a following circumstance: When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit in installed increases, etc. WARNING NOTICE: IN MOST CASES IT IS AN INFRINGMENT OF COPYRIGHT TO MAKE COPIES OF TAPES OR DISCS WITHOUT THE PERMISSION OF THE COPYRIGHT OWNERS. ANYONE WISHING TO COPY COMMERCIALLY AVAILABLE TAPES OR DISCS SHOULD CONTACT THE MECHANICAL COPYRIGHT PROTECTION SOCIETY LIMITED OR THE PERFORMING RIGHTS SOCIETY LIMITED. Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories Licensing Corporation. HX Pro originated by Bang & Olufsen. "DOLBY", the double-D symbol and "HX PRO" are trademarks of Dolby Laboratories Licensing Corporation. Important items CT-2050/203/KXF-W6010/W4010 (En/M) 5 Handling the cassette tape Notes on cassette tape Safety tab (accidental erasure prevention tab) After an important recording has been finished, break the safety tab, to prevent the recorded contents from being erased or recorded on accidentally. To store cassette tapes Do not store the tapes in a place which is subject to direct sunlight, or near equipment that generates heat. Keep the cassette tapes away from any magnetic field. N S For A side For B side When there is slack in the tape In such a case, insert a pencil into the reel hole and wind the reel hub to remove the slack. To re-record Apply tape only to the position where the tab has been removed. Notes 1. Longer tape than 110 minutes cassette tape Since longer tape than 110 minutes cassette tape is very thin, the tape could adhere to the pinch roller or be easily cut. It is recommended that these tapes not be used with this unit to prevent possible damage. 2. Endless tapes Do not use an endless tape, as this could damage the mechanism of the unit. System connections CT-2050/203/KXF-W6010/W4010 (En/M) 6 Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to "In case of difficulty". Except for U.S.A., Canada Caution regarding placement To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater than, shown below. Left and right panels: 10 cm, rear panel: 10 cm AC110120V~ AC220240V~ SYSTEM CONTROL REC PLAY L R LINEIN LINEOUT Audio cords System control cord To wall AC outlet SYSTEM CONTROL PHONO CD TUNER TAPE REC PLAY REC MD PLAY L SL 16 XS 8 L R R Amplifier Audio cord System control cord *The connected component model is variable dependent on areas. SYSTEM LINE OUTPUT CONTROL VARIABLE L SL16 XS 8 R CD player Notes 1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced. 2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit. System connections CT-2050/203/KXF-W6010/W4010 (En/M) 7 ABOUT THE SYSTEM CONTROL CONNECTIONS Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. There are two KENWOOD system control modes. Make connections according to the groups of terminal symbols shown below. [XS8] Mode : lets you combine F, f and terminals [SL16] Mode : for terminals only This unit is compatible with both [XS8] and [SL16] modes. It comes from the factory set to the [SL16] mode. To switch to the [XS8] mode, follow the instructions in "SWITCHING FROM [SL16] TO [XS8]" below. 1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for system operations. If your equipment consists of this kind of combination, please do not connect any system control cords. Even without system control cords, normal operations can be carried out without affecting performance. 2. If your amplifier or receiver does not have a system control terminal, do not connect any system control cords to the system control terminals on the other components. 3. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 4. Be sure the system control plugs are inserted all the way in to the system control terminals. Notes ABOUT THE SYSTEM CONTROL OPERATIONS Remote Control Lets you operate this unit with the system remote supplied with the amplifier or receiver. Automatic Operation (except [XR] ...