DUAL DIN SIZED CD RECEIVER DPX502U DPX502UY INSTRUCTION MANUAL © B64-3829-00/00 (EW/E2W) Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Switching Display 3 4 7 Menu system 24 Tuner features Tuning Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning 13 RDS features Traffic Information Radio Text Scroll PTY (Program Type) Program Type preset Changing Language for PTY Function 15 Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Synchronize Clock Display Illumination Control Dimmer Switching preout Built-in Amp Setting Dual Zone System Setting Supreme Setting AMP Control News Bulletin with Timeout Setting Local Seek Tuning Mode AF (Alternative Frequency) Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception Auxiliary Input Display Setting Selecting Russian Characters Text Scroll Built-in Auxiliary input Setting Power OFF Timer CD Read Setting Audio Preset Memory Audio Preset Recall Firmware version display Demonstration mode Setting CD/USB device/Audio file/External disc control features 18 Playing CD & Audio file USB Device Connection Playing USB (iPod) device Drive Search Playing External Disc Fast Forwarding and Reversing Music Search Disc Search/Folder/Album Search Direct Music Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play All Random Play File select File Select 1 mode File Select 2 mode Text/Title Scroll Basic Operations of remote control 32 Accessories/ Installation Procedure 34 Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications 35 37 38 39 41 2| English Safety precautions 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · Do not watch or fix your eyes on the unit's display when you are driving for any extended period. · Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. Do Not Load 8 cm (3 in.) CDs in the CD slot If you try to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · Use only the screws provided or specified for installation. If you use wrong screws, you could damage the unit. ¤ · You can damage both your unit and the CD changer if you connect them incorrectly. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. The "AAC" logo is trademark of Dolby Laboratories. English | 3 Notes · If you experience problems during installation, consult your Kenwood dealer. · When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. · The RDS feature won't work where the service is not supported by any broadcasting station. · The characters which can be displayed by this unit are A-Z 0-9 @ " ` ` % & * + ­ = , . / \ < > [ ] ( ) : ; ^ - { } | ~. · The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. ¤ · Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 31). How to reset your unit · If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. · Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in the USB device. For how to remove the USB device, refer to (page 19). · Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. About KENWOOD "Music Editor" of PC application attached to DPX502U/ DPX502UY · "Music Editor" is recorded in the CD-ROM attached to this unit. · Refer to the attached installation manual for the installation method of "Music Editor". · Refer to the user's manual recorded in the installation CD-ROM and Help of "Music Editor" for the operation method of "Music Editor". · The unit can play CD/ USB device created by "Music Editor". · Information about "Music Editor" upgrade is put on the site, www.kenwood.com. Reset button 4| English About Audio file · Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav) · Playable disc media CD-R/RW/ROM · Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. · Playable USB device USB mass storage class, iPod with KCA-iP200 · Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. · Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from to . CD ( About USB device · Install the USB device in the place where it will not prevent you from driving your vehicle properly. · You cannot connect a USB device via a USB hub. · Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. · No USB device comes with this unit. You need to purchase a commercially available USB device. · Do not directly connect the USB device to the USB connector on the panel. Connect it using a cable. · Leave the cap on when not using an USB device. · For how to play the audio files recorded in a USB device, see (page 18). · When connecting the USB device, usage of the CAU1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback. ) : Folder Folder : Audio file Audio fi About DAB Tuner control An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well. / · In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals. · The word "iPod" appearing in this manual indicates the iPod connected with the KCA-iP200 (optional accessory). The iPod connected with the KCA-iP200 can be controlled from this unit. iPods that can be connected with the KCA-iP200 are the iPod nano and the iPod with video. When an iPod is connected using a commercially available USB cable, it is handled as a mass-storage-class device. · For the supported formats and types of USB device, refer to www.kenwood.com/usb/. Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry. After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed. and in At the operation to press [DISP] button, use [TI] button instead. This function cannot be used. English | 5 Notes Handling CDs · Do not touch the recording surface of the CD. · Do not stick tape etc. on the CD, or use a CD with tape stuck on it. · Do not use disc type accessories. · Clean from the center of the disc and move outward. · When removing CDs from this unit, pull them out horizontally. · If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. CDs that cannot be used · CDs that are not round cannot be used. · CDs with coloring on the recording surface or CDs that are dirty cannot be used. · This unit can only play the CDs with The marking of products using lasers (Except for some areas) . This unit may not correctly play discs which do not have the mark. · You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. 6| English General features DISP Auxiliary input VOL ATT Control knob Q Clock display SRC LOUD indicator ATT indicator Power Turning ON the Power Press the [SRC] button. * An equipment such as a portable audio player can be connected to the auxiliary input terminal using a commercially available mini-plug (3.5ø). / · When the power is ON, the (page 25) is displayed as "CODE ON" or "CODE OFF". / · This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle's battery. The time until full power OFF can be set in (page 30). · When connection of the iPod is recognized, the source display changes from "USB" to "iPod". · USB (iPod) source is recognized as CD s ...