User manual KENWOOD KDC-3027A

KDC-4027 KDC-4027V KDC-3027A KDC-3027G KDC-308A KDC-308G KDC-F327A KDC-F327G CD-RECEIVER INSTRUCTION MANUAL © B64-2673-00 / 00 (EN/E2N) Contents English Safety precautions......................3 About RDS ..................................5 About CDs...................................5 General features .........................6 Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Switching Display Theft Deterrent Faceplate TEL Mute RDS features .............................11 Traffic Information Presetting Volume for Traffic Information PTY (Program Type) Program Type preset Changing Language for PTY Function Menu system.............................17 Menu System Touch Sensor Tone Manual Clock Adjustment Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination News Bulletin with Timeout Setting Local Seek Tuning Mode Auto Memory Entry AF (Alternative Frequency) Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception Text Scroll Disc Naming Power OFF Timer CD/External disc control features ..................................14 Playing CD Playing External Disc Fast Forwarding and Reversing Track Search Album Search Track/Album Repeat Track Scan Random Play Magazine Random Play Disc Naming (DNPS) Text/Title Scroll Tuner features .............................9 Tuning Station Preset Memory Auto Memory Entry Preset Tuning Accessories ...............................22 Installation Procedure ..............22 Connecting Wires to Terminals ...........................23 Installation ................................24 Troubleshooting Guide .............26 Specifications ...........................29 --2-- Safety precautions 2WARNING To prevent injury and/or fire, take the following precautions: · Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. · When extending the ignition, battery or ground wires, make sure to use automotivegrade wires or other wires with an area of 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. · To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. · Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not open the top or bottom covers of the unit. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. · Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. · When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · To prevent short circuits when replacing a fuse, first disconnect the wiring harness. · Do not place any object between the faceplate and the unit. · During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit. IMPORTANT INFORMATION About CD players/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. You can damage both your unit and the CD changer if you connect them incorrectly. Do Not Load 8-cm (3-in.) CDs in the CD slot If you try to load an 8-cm CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. --3-- Safety precautions English NOTE · If you experience problems during installation, consult your Kenwood dealer. · If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. · Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored. PTY Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. LOUD AUD OFF TI VOL ADJ SCRL SCAN RDM REP M.RDM CLK MENU Reset button · Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). · The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. Cleaning the CD Slot As dust can accumulate in the CD slot, clean it occasionally. Your CDs can get scratched if you put them in a dusty CD slot. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. --4-- About RDS RDS (Radio Data System) When listening to an RDS station, the programme service name of the station is displayed, advising you quickly which station is being received. RDS (Radio Data System) stations also transmit alternative frequency data for the same station. When you are making long trips, this function automatically switches to the particular frequency with the best reception for the particular network of stations that you want to listen to. The data is automatically stored, allowing you to switch quickly to another RDS stations, broadcasting the same programme, that has better reception. These include stations stored in the station preset memory that you often listen to. About CDs Handling CDs · Don't touch the recording surface of the CD. CD cleaning Clean from the center of the disc and move outward. Removing CDs · CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. · Don't stick tape etc. on the CD. Also, don't use a CD with tape stuck on it. When removing CDs from this unit pull them out horizontally. CDs that can't be used · CDs that aren't round can't be used. Enhanced Other Network Stations that offer also transmit information about other RDS stations that have traffic information. When you are tuned to a station that is not transmitting traffic information, but another RDS station starts transmitting a traffic bulletin, the tuner automatically switches to the other station for the duration of the bulletin. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. · CDs with coloring on the recording surface or that are dirty can't be used. · This unit can only play the CDs with . It may not correctly play discs which do not have the mark. · A CD-R or CD-RW that hasn't been finalized can't be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.) Burrs Burrs Alarm When an emergency transmission (announcing disasters, etc.) is sent, all current functions are interrupted to allow the warning to be received. CD storage · Don't place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. · Store CDs in their cases. CD accessories Don't use disc type accessories. --5-- General features English Power Release button u d 4 AM FM ¢ Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. PTY LOUD AUD OFF TI VOL ADJ SCRL SCAN RDM REP M.RDM CLK MENU Selecting the Source ATT/ LOUD Q/ SRC AUD CLK Press the [SRC] button. Source required Tuner CD External disc (Function of the KDC-4027/KDC-4027V) Standby (Illumination only mode) Display "TUNER" "CD" "DISC" "STANDBY" LOUD indicator This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicles battery. The time until full power OFF can be set in (page 21). Volume SYSTEM Q indicator ATT indicator Increasing Volume Press the [u] button. Decreasing Volume Press the [d] button. --6-- Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed the Attenuator turns ON or OFF. When it's ON, the "ATT" indicator blinks. Easy "EASY" · Each setting value is changed with the (page 8). First, select the speaker type with the Speaker setting. · When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values. Loudness Compensating for low and high tones during low volume. Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it's ON, "LOUD" indicator is ON. Audio Control 1 2 3 Select the source for adjustment Press the [SRC] button. Enter Audio Control mode Press the [AUD] button for at least 1 second. Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below. Adjust the Audio item Press the [4] or [¢] button. Adjustment Item Display Bass level "BAS" Middle level "MID" Treble level "TRE" Balance "BAL" Fader "FAD" Exit Audio Control mode Press the [AUD] button. System Q You can recall the best sound setting preset for different types of the music. 4 1 2 Select the source to set Press the [SRC] button. Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Flat "FLAT" Rock "ROCK" Top 40 "TOP40" Pops "POPS" Jazz "JAZZ" Range ­8 -- +8 ­8 -- +8 ­8 -- +8 Left 15 -- Right 15 Rear 15 -- Front 15 5 --7-- General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. In CD & External disc source Information Track Time Disc name* Disc title* Track title* Clock English Display "DNPS" "D-TITLE" "T-TITLE" 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. Enter Speaker Setting mode Press the [Q] button. Select the Speaker type Press the [4] or [¢] button. Each time the button is pressed the below. Speaker type OFF For the OEM speaker For 6 & 6x9 in. speaker For 5 & 4 in. speaker Exit Speaker Setting mode Press the [Q] button. 2 3 *: Function of the KDC-4027/KDC-4027V . setting switches as shown Display "SP OFF" "SP OEM" "SP 6/6x9" "SP 5/4" Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. · The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. · Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. 4 Switching Display Switching the information displayed. Press the [CLK] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Program Service name or Frequency Clock Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. --8-- Tuner features 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. 4 AM FM ¢ TEL Mute The audio system automatically mutes when a call comes in. LOUD PTY When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. AUD OFF TI VOL ADJ SCRL SCAN RDM REP M.RDM CLK MENU SRC 1-6 MENU Band display Frequency display ST indicator Preset station number AUTO indicator --9-- Tuner features English Tuning Selecting the station. Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. Tune up or down band Press the [4] or [¢] button. During reception of stereo stations the "ST" indicator is ON. 1 2 Select the band for Auto Memory Entry Press the [FM] or [AM] button. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. Select the Auto Memory Entry mode Press the [FM] or [AM] button. Select the "A-MEMORY" display. Open Auto Memory Entry Press the [4] or [¢] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. · When the (page 20) is ON, only RDS stations are put in the memory. · When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren't put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren't put in the memory. 2 3 3 4 Station Preset Memory Putting the station in the memory. 1 2 3 Select the band Press the [FM] or [AM] button. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the [1] -- [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] -- [6] button. -- 10 -- RDS features Preset Tuning Calling up the stations in the memory. FM/ PTY 1 2 Select the band Press the [FM] or [AM] button. Call up the station Press the [1] -- [6] button. LOUD 4 AM ¢ PTY AUD OFF TI VOL ADJ SCRL SCAN RDM REP M.RDM CLK MENU TI/ VOL ADJ 1-6 CLK TI indicator RDS indicator PTY indicator -- 11 -- RDS features English Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button is pressed the Traffic Information function turns ON or OFF. When it's ON, "TI" indicator is ON. When a traffic information station isn't being received the "TI" indicator blinks. When a traffic bulletin starts, "TRAFFIC" is displayed it and it switches to traffic information. During reception of a AM station when the Traffic Information function is turned ON, it switches to a FM station. PTY (Program Type) Selecting the Program Type and searching for a station. 1 Enter PTY mode Press the [PTY] button for at least 1 second. During PTY mode the "PTY" indicator is ON. This function can't be used during a traffic bulletin or AM reception. 2 Receiving other traffic information stations Press the [4] or [¢] button. Traffic information station switching can be done when listening to the radio. Presetting Volume for Traffic Information Setting the volume during Traffic Information. 1 2 3 Receive the station. Set the volume you want. Preset the volume Press the [VOL ADJ] button for at least 2 seconds. The volume level display blinks 1 time. Select the Program Type Press the [FM] or [AM] button. Each time the button is pressed the Program Type switches as shown below. No. Program Type Display 1. Music "MUSIC" 2. Speech "SPEECH" 3. News "NEWS" 4. Current Affairs "AFFAIRS" 5. Information "INFO" 6. Sport "SPORT" 7. Education "EDUCATE" 8. Drama "DRAMA" 9. Culture "CULTURE" 10. Science "SCIENCE" 11. Varied "VARIED" 12. Pop Music "POP M" 13. Rock Music "ROCK M" 14. Easy Listening Music "EASY M" 15. Light Classical "LIGHT M" 16. Serious Classical "CLASSICS" 17. Other Music "OTHER M" 18. Weather "WEATHER" 19. Finance "FINANCE" 20. Children's programs "CHILDREN" -- 12 -- 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary "SOCIAL" "RELIGION" "PHONE IN" "TRAVEL" "LEISURE" "JAZZ" "COUNTRY" "NATION M" "OLDIES" "FOLK M" "DOCUMENT" Presetting the Program Type 1 2 Select the Program Type to preset Refer to (page 12). Preset the Program Type Press the [1] -- [6] button for at least 2 seconds. Enter PTY mode Refer to (page 12). Call up the Program Type Press the [1] -- [6] button. Calling up the preset Program Type 1 2 · Speech and Music include the Program type shown below. Music: No.12 -- 17, 26 -- 30 Speech: No.3 -- 11, 18 -- 25, 31 · The Program Type can be put in the [1] -- [6] button memory and called up quickly. Refer to the (page 13). · The display language can be changed. Refer to (page 13). 3 Search for the selected Program Type station Press the [4] or [¢] button. When you want to search for other stations press the [4] or [¢] button again. When the selected Program Type isn't found, "NO PTY" is displayed. Select another Program Type. Changing Language for PTY Function Selecting the Program Type display language. 1 2 3 Enter PTY mode Refer to (page 12). Enter Changing Language mode Press the [CLK] button. Select the language Press the [1] -- [3] button. Button [1] [2] [3] 4 Exit PTY mode Press the [PTY] button for at least 1 second. Program Type preset Putting the Program Type in the Preset button memory and calling it up quickly. Language English French German 4 -- 13 -- Exit Changing Language mode Press the [CLK] button. CD/External disc control features English Playing CD 0 AM/ FM/ 4 DISC- DISC+ ¢ When a CD is inserted Press the [SRC] button. Select the "CD" display. When a CD is inserted, the "IN" indicator is ON. PTY LOUD AUD OFF Eject the CD Press the [0] button. SCRL SCAN RDM REP M.RDM CLK MENU TI VOL ADJ 3 in. (8cm) CD cannot be played. Using an adapter and inserting them into this unit can cause damage. SRC SCRL SCAN RDM REP M.RDM MENU Function of the KDC-4027/KDC-4027V Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Track number Track time Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD-2" CD player "DISC" CD changer/ MD changer · Disc No. 10 is displayed as "0". · The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. IN indicator Disc number -- 14 -- Fast Forwarding and Reversing Fast Forwarding Hold down on the [¢] button. Release your finger to play the disc at that point. Reversing Hold down on the [4] button. Release your finger to play the disc at that point. Each time the button is pressed the Repeat Play switches as shown below. Repeat play Display Track Repeat "REP ON"/ "TREP ON" Album Repeat (Function of disc changer) "DREP ON" OFF "REP OFF" Track Scan Track Search Selecting the song you want to hear. Press the [4] or [¢] button. Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. 1 Start Track Scan Press the [SCAN] button. "SCAN ON"/"TSCN ON" is displayed. Release it when the song you want to listen to is played Press the [SCAN] button. 2 Function of the KDC-4027/KDC-4027V Album Search (Function of disc changer) Selecting the disc you want to hear. Press the [DISC­] or [DISC+] button. Random Play Playing all the songs on the disc in random order. Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF. When it's ON, "RDM ON" is displayed. When the [¢] button is pressed, the next song select starts. Track/Album Repeat Replaying the track/disc you're listening to. Press the [REP] button. -- 15 -- CD/External disc control features English Function of the KDC-4027/KDC-4027V 6 7 8 Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, "MRDM ON" is displayed. When the [¢] button is pressed, the next song select starts. Select the characters Press the [FM] or [AM] button. Repeat steps 5 through 6 and attach a name. Exit Menu mode Press the [MENU] button. · When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. · Media that you can attach a name to - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. · The name of a CD can be changed by the same operation you used to name it. Function of the KDC-4027/KDC-4027V Function of the KDC-4027/KDC-4027V Disc Naming (DNPS) Attaching a title to a CD. (Function of disc changer) Text/Title Scroll Scrolling the displayed CD text or MD title. Press the [SCRL] button. 1 2 Play the disc you want to attach a name to A title can't be attached to a MD. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. Select Name set mode Press the [FM] or [AM] button. Select the "NAME SET" display. Enter Name set mode Press the [4] or [¢] button for at least 2 seconds. Move the cursor to the enter character position Press the [4] or [¢] button. -- 16 -- 3 4 5 Menu system Menu System 4 AM FM ¢ Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. PTY 1 LOUD AUD OFF TI VOL ADJ SCRL SCAN RDM REP M.RDM CLK MENU Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "BEEP" display. Set the menu item Press the [4] or [¢] button. Example: When "BEEP" is selected, each time the button is pressed it switches "BEEP ON" or "BEEP OFF". Select 1 of them as the setting. You can continue by returning to step 2 and setting other items. Exit Menu mode Press the [MENU] button. When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting.) Also, the explanation for items that aren't applicable (etc.) are entered step by step. 2 MENU 3 Menu display 4 RDS indicator AUTO indicator -- 17 -- Menu system English Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. Synchronize Clock Synchronizing the RDS station time data and this unit's clock. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. Adjust the time manually. It takes 3 to 4 minutes to synchronize the clock. Manual Clock Adjustment This adjustment can be done when the (page 18) is set as OFF. DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF. 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "CLK ADJ" display. Enter Clock Adjust mode Press the [4] or [¢] button for at least 2 seconds. The clock display blinks. Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [¢] button. 2 3 Function of the KDC-4027/KDC-4027V Selectable Illumination Selecting the button illumination color as green or red. Display "COL GRN" "COL RED" Setting The illumination color is green. The illumination color is red. 4 Exit Clock adjustment mode Press the [MENU] button. -- 18 -- News Bulletin with Timeout Setting It switches automatically when a news bulletin starts even if the radio isn't being listened to. Also, the time interval when interrupt is prohibited can be set. Display and Setting "NEWS OFF" "NEWS 00M" "NEWS 90M" When "NEWS 00M" -- "NEWS 90M" is set, the News Bulletin Interrupt function is ON. When it's ON, the "NEWS" indicator is ON. When the news bulletin starts, "NEWS" is displayed, and it switches to the news bulletin. · If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. · The news bulletin volume is the same level that was set for traffic information (page 12). · This function is only available if the desired station sends PTY-code for news bulletin or belongs to Network sending PTY-code for news bulletin. · When the News Bulletin Interrupt function is ON, it switches to an FM station. Tuning Mode Sets the tuning mode. Tuning mode Display Auto seek "AUTO 1" Preset station seek "AUTO 2" Manual Operation Automatic search for a station. Search in order of the stations in the Preset memory. "MANUAL" Normal manual tuning control. ... Auto Memory Entry For the operation method refer to (page 10). Local Seek Only stations whose reception is good are searched for in auto seek tuning. Display "LO.S OFF" "LO.S ON" Setting The local seek function is OFF. The local seek function is ON. -- 19 -- Menu system English AF (Alternative Frequency) When poor reception is experienced, automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display "AF ON" "AF OFF" Setting The AF function is ON. The AF function is OFF. Auto TP Seek When the TI function is ON and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. Display "ATPS ON" "ATPS OFF" Setting The Auto TP Seek Function is ON. The Auto TP Seek Function is OFF. When the AF function is ON, the "RDS" indicator is ON. When no other stations with stronger reception are available for the same program in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn OFF the AF function in such a case. Monaural Reception Noise can be reduced when stereo broadcasts are received as monaural. Restricting RDS Region (Region Restrict Function) You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. Display "REG ON" "REG OFF" Setting The Region Restrict Function is ON. The Region Restrict Function is OFF. Display "MONO OFF" "MONO ON" Setting The monaural reception is OFF. The monaural reception is ON. Function of the KDC-4027/KDC-4027V Text Scroll Setting the displayed text scroll. Display "SCL MANU" "SCL AUTO" Setting Doesn't scroll. Scrolls when the display changes. Sometimes stations in the same network broadcast different programs or use different program service names. The text scrolled is shown below. · CD text · MD title -- 20 -- Function of the KDC-4027/KDC-4027V Disc Naming For the setting method refer to the (page 16). Power OFF Timer Setting the timer to turn this unit's power OFF automatically when Standby mode continues. Using this setting can save the vehicle's battery power. Display "OFF ­ ­ ­" "OFF 20M" (Original setting) "OFF 40M" "OFF 60M" Setting Power OFF Timer function is OFF. Turns the power OFF after 20 minutes. Turns the power OFF after 40 minutes. Turns the power OFF after 60 minutes. -- 21 -- Accessories English External view 1 Number of items 2CAUTION ..........................................1 2 ..........................................2 3 ..........................................1 The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7. Install the unit in your car. 8. Reconnect the - terminal of the battery. 9. Press the reset button. · If your car is not prepared for this special connection-system, consult your Kenwood dealer. · Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. · Make sure that all wire connections are securely made by inserting jacks until they lock completely. · If your vehicle's ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the unit's power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. · If the fuse blows, first make sure that the wires have not caused a short circuit, then replace the old fuse with one with the same rating. · Insulate unconnected wires with vinyl tape or other similar material. To prevent short circuits, also do not remove the caps on the ends of the unconnected wires or the terminals. · Connect the speaker wires correctly to the terminals to which they correspond. The unit may receive damage or fail to work if you share the - wires and/or ground them to any metal part in the car. · After the unit is installed, check whether the brake lamps, indicators, wipers, etc. on the car are working properly. · If the console has a lid, make sure to install the unit so that the faceplate does not hit the lid when closing and opening. · Mount the unit so that the mounting angle is 30° or less. -- 22 -- Connecting Wires to Terminals 10 Rear left output (White) Rear right output (Red)4 KENWOOD disc changer input (KDC-4027/4027V only) 14 To connect the Disc changer, consult your Disc changer manual. 15 REAR L Antenna Conversion Adaptor (ISO­JASO) (Accessory3) 2 To Steering remote (Blue/Yellow) (Optional Accessory) REMO.CONT R Antenna Cord (ISO) 1 FM/AM antenna input 3 Fuse (10A) 13 Wiring harness (Accessory1) 16 Connector Function Guide Pin Numbers for ISO Connectors Wire Color Functions 1TEL mute wire (Brown) TEL MUTE External Power Connector A­4 A­5 A­7 A­8 Speaker Connector B­1 B­2 B­3 B­4 B­5 B­6 B­7 B­8 Connect to the terminal that is grounded when either the telephone rings or during conversation. 21 To connect the KENWOOD navigation system, consult your navigation manual. 22 Yellow Blue/White Red Black Battery Power Control Ignition (ACC) Earth (Ground) Connection Battery wire (Yellow) Ignition wire (Red) If no connections are made, do not let the wire come out from the tab. 18 See page 24 Power control/ Motor antenna control wire (Blue/White) 20 P.CONT ANT.CONT Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (­) Front Right (+) Front Right (­) Front Left (+) Front Left (­) Rear Left (+) Rear Left (­) A­7 Pin (Red) 8 A­4 Pin (Yellow) 9 Connector A Connector B -- 23 -- 8 7 8 7 6 5 6 5 4 3 4 3 2 1 2 1 Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. 23 Connecting Wires to Terminals English 2WARNING Installation Installation Firewall or metal support Screw (M4X8) (commercially available) Connecting the ISO Connector (see p.23) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated. Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc. 1 (Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A-4 pin (yellow) is connected to the constant power supply. Unit Ignition cable (Red) Battery cable (Yellow) Vehicle A­7 Pin (Red) A­4 Pin (Yellow) Self-tapping screw (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. 2 The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition. Unit Ignition cable (Red) Battery cable (Yellow) Vehicle A­7 Pin (Red) A­4 Pin (Yellow)