KDC-4015 KDC-415S KDC-315V KDC-315S KDC-215S KDC-35MR CD-RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model KDC-4015/415S/315V/315S/215S/35MR Serial number ©B64-1546-10 (KW) COMPACT DIGITAL AUDIO Contents English Before use Warning.........................................................................................3 Safety precautions ........................................................................4 Handling Compact discs................................................................6 Basic Operations of remote ................................17 Installation Accessories.................................................................................19 Installation Procedure..................................................................19 Connecting Wires to Terminals...................................................20 Installation ...................................................................................21 General features Power............................................................................................7 Volume ..........................................................................................7 Attenuator .....................................................................................7 Switching Modes ..........................................................................8 Loudness ......................................................................................8 Audio Control Setting ....................................................................8 ec4/dB (Sound Coordinate) ...........................................................9 Mobile Preset................................................................................9 Theft Deterrent Faceplate ...........................................................10 Clock display ...............................................................................10 Adjusting Time ............................................................................10 Troubleshooting Guide .......................................24 Specifications .....................................................27 Tuner features Tuning .........................................................................................11 Station Preset Memory ...............................................................12 Auto Memory Entry.....................................................................12 Clean Reception System Circuit (CRSC) .....................................12 CD/External disc control features Playing CDs .................................................................................13 Playing Other Disc mode ............................................................14 Fast Forwarding and Reversing Disc Play ...................................14 Track Search................................................................................14 Disc Search .................................................................................14 Track / Disc Repeat .....................................................................15 Track Scan...................................................................................15 Disc Scan ....................................................................................15 Random Play ...............................................................................16 Magazine Random Play...............................................................16 --2-- 2Warning 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE This Class B digital apparatus complies with Canadian ICES-003. --3-- Safety precautions English 2WARNING To prevent injury or fire, take the following precautions: · Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. · When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. · Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not open the top or bottom covers of the unit. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. · Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. · When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · To prevent a short circuit when replacing a fuse, first disconnect the wiring harness. · Do not place any object between the faceplate and the unit. · Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. IMPORTANT INFORMATION You cannot connect the unit directly to the following CD automatic changers. If you want to use older changers with the unit, follow the directions below according to the type of changer you own: · KDC-C200 / KDC-C300 / KDC-C400 Use the extension cable and the control box attached to the CD changer, and the optional CA-DS100 converter cord. · KDC-C301 / KDC-C600 / KDC-C800 / KDCC601 / KDC-C401 Use the extension cable attached to the CD changer, and the optional CA-DS100 converter cord. · KDC-C100 / KDC-C302 / C205 / C705 / non-Kenwood CD changers Cannot be used with this model. 2CAUTION You can damage both your unit and the CD changer if you connect them incorrectly. --4-- NOTE · If you experience problems during installation, consult your Kenwood dealer. · If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. SRC PWR OFF CRSC Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Cleaning the CD Slot As dust tends to accumulate in the CD slot, clean it every once in a while. Your CDs can get scratched if you put them in a dusty CD slot. Cleaning the Unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth. 2CAUTION Do not wipe the panel with a hard cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. A.ADJ DISC LOUD SCAN RDM REP D.SCN M.RDM AUTO AME CLK ADJ DISC Reset button · Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). · The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. · The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. 2CAUTION Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. --5-- Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs · Do not touch the recorded side of the CD (the side opposite the label) when holding it. English Cleaning CDs If a CD has gotten dirty, wipe it off gently using a commercially available cleaning cloth or a soft cotton cloth, starting from the center of the disc and moving outward. Do not clean CDs with conventional record cleaners, anti-static formulas, or chemicals such as paint thinner or benzene. Do Not Load CD Accessories Do not use commercially available CD accessories that can be loaded into the CD slot, such as stabilizers, protective sheets, or CD cleaning discs, since they can cause the unit to malfunction. Removing the CD Only remove the CD from the machine in a horizontal direction, holding it flat. You may damage the surface of the CD if you try pulling it down as it ejects. Checking New CDs for Burrs When playing a new CD for the first time, check that there are not any burrs stuck to the perimeter of the disc or in the central hole. CDs with burrs stuck on them may not load properly or may skip while playing. Remove burrs using a ballpoint pen or a similar utensil. Do Not Use Special Shape CDs · Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. · Do not stick tape on either side of the CD. Tape Burrs COMPACT Storing CDs · Do not store CDs in areas exposed to direct sunlight (such as a car seat or the dashboard) or other hot places. · Remove CDs from the unit when not listening to them for a while, and put them back in their cases. Do not pile up CDs that are removed from their cases or prop them against something. Burrs · Be sure to use CDs with disc mark only for this unit. DIGITAL AUDI ...