KDC-4080R KDC-4080RV KDC-3080RA KDC-3080RG KDC-303RG CD-RECEIVER INSTRUCTION MANUAL COMPACT ©B64-1549-00 (E) DIGITAL AUDIO Contents English Before use Safety precautions ........................................................................3 Handling Compact discs................................................................5 Menu settings Menu System..............................................................................21 Touch Sensor Tone .....................................................................21 Manual Time Adjustment............................................................21 Automatic Time Adjustment .......................................................22 Disabled System Indicator (DSI)..................................................22 Selectable Illumination ................................................................22 News Bulletin Function with PTY News Timeout Setting.................................................22 Local Seek Function ....................................................................23 Selecting Tuning Mode ...............................................................23 Auto Memory Entry.....................................................................23 AF (Alternative Frequency) Function ...........................................23 Restricting RDS Region (Region Restrict Function) ....................24 Auto TP Seek Function................................................................24 Monaural Reception ....................................................................24 Text Scroll ...................................................................................24 General features Power............................................................................................6 Volume ..........................................................................................6 Switching Modes ..........................................................................6 TEL Mute ......................................................................................7 Theft Deterrent Faceplate .............................................................7 Attenuator .....................................................................................8 Loudness ......................................................................................8 Audio Control Setting ....................................................................8 Tuner features Tuning .........................................................................................10 Station Preset Memory ...............................................................10 Clock display ...............................................................................10 RDS features RDS (Radio Data System) ...........................................................11 Programme Type (PTY) Function ................................................12 Traffic Information Function ........................................................13 Presetting Volume for Traffic Information/News ........................13 Enhanced Other Network ...........................................................14 Alarm...........................................................................................14 Installation Accessories.................................................................................25 Installation Procedure..................................................................25 Connecting Cables to Terminals .................................................26 Installation ...................................................................................27 Troubleshooting Guide .......................................29 Specifications .....................................................32 CD/External disc control features Playing CDs .................................................................................15 Playing Other Disc mode ............................................................15 Fast Forwarding and Reversing Disc Play ...................................15 Track Search................................................................................16 Disc Search .................................................................................16 Track / Disc Repeat .....................................................................16 Track Scan...................................................................................16 Disc Scan ....................................................................................17 Random Play ...............................................................................17 Magazine Random Play...............................................................18 Switching Display for Discs.........................................................18 Presetting Disc Names ...............................................................18 Text Scroll ...................................................................................20 --2-- Safety precautions 2WARNING To prevent injury and/or fire, take the following precautions: · Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. · When extending the ignition, battery or ground cables, make sure to use automotivegrade cables or other cables with an area of 0.75mm2 (AWG18) or more to prevent cable deterioration and damage to the cable coating. · To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. · Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not open the top or bottom covers of the unit. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. · Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. · When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · To prevent short circuits when replacing a fuse, first disconnect the wiring harness. · Do not place any object between the faceplate and the unit. · During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit. IMPORTANT INFORMATION You cannot connect the unit directly to the following CD automatic changers. For users who want to use older changers with the unit, follow the directions below according to the type of changer you own: · KDC-C200 / KDC-C300 / KDC-C400 Use the extension cable and the control box attached to the CD changer, and the optional CA-DS100 converter cable. · KDC-C301 / KDC-C600 / KDC-C800 / KDCC601 / KDC-C401 Use the extension cable attached to the CD changer, and the optional CA-DS100 converter cable. · KDC-C100 / KDC-C302 / C205 / C705 / non-Kenwood CD changers Cannot be used with this model. 2CAUTION You can damage both your unit and the CD changer if you connect them incorrectly. --3-- Safety precautions English NOTE · If you experience problems during installation, consult your Kenwood dealer. · If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. SRC PWR OFF PTY Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Cleaning the CD Slot As dust can accumulate in the CD slot, clean it occasionally. Your CDs can get scratched if you put them in a dusty CD slot. Cleaning the Unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth. 2CAUTION Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. MENU DISC LOUD SCAN RDM REP D.SCN M.RDM DISC TI VOL ADJ CLK NAME.S Reset button · Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). · The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. · The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Lens Fogging The marking of products using lasers (Except for some areas) Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. 2CAUTION Do Not Load 8-cm (3-in.) CDs in the CD slot If you try to load an 8-cm CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. --4-- Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs · Do not touch the recorded side of the CD (i.e., the side opposite the label) when holding it. Cleaning CDs If a CD has become dirty, wipe it off gently using a commercially available cleaning cloth or a soft cotton cloth, starting from the centre of the disc and moving outward. Do not clean CDs with conventional record cleaners, anti- static formulas, or chemicals such as paint thinner or benzene. Do Not Load CD Accessories in Slot Do not use commercially available CD accessories that can be loaded into the CD slot, such as stabilisers, protective sheets, or CD cleaning discs, since they can cause the unit to malfunction. Removing the CD Only remove the CD from the machine in a horizontal direction. You may damage the surface of the CD if you try pulling it down as it ejects. Checking New CDs for Burrs When playing a new CD for the first time, check that there are not any burrs stuck to the perimeter of the disc or in the central hole. CDs with burrs stuck on them may not load properly or may skip whilst playing. Remove burrs using a ballpoint pen or a similar utensil. Do Not Use Special Shape CDs · Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. · Do not stick tape on either side of the CD. Tape Storing CDs · Do not store CDs in areas exposed to direct sunlight ­ such as a car seat or above the fascia panel (dashboard) ­ or other hot places. · Remove CDs from the unit when not listening to them for a whilst, and put them back in their cases. Do not stack CDs that have been removed from their cases or prop them against something. Burrs Burrs COMPACT · Be sure to use CDs with disc mark only for this unit. DIGITAL AUDIO Do Not Use CDs with Sticker on the Labelled Side Do not use the CD with the label sticker stuck on it. Using such a CD may cause the CD to be deformed and the sticker to peel off, resulting in malfunction of the unit. --5-- General features English Power SRC/ PWR OFF u SRC PWR OFF PTY FM ¢ Turning on the power: Press the SRC button. NOTE MENU DISC Turn ...