User manual KENWOOD KDC-MP2028 - Instruction Manual

KDC-MP2028 KDC-MP228 KDC-228 CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER-LECTEUR DE CD MODE D'EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model KDC-MP2028/MP228/228 Serial number © B64-2926-00/00 (KW) Contents Warning Safety precautions Notes About CDs About MP3 and WMA General features Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Dimmer Control Theft Deterrent Faceplate TEL Mute 3 4 5 6 7 8 Menu system Menu System Security Code Touch Sensor Tone Manual Clock Adjustment DSI (Disabled System Indicator) CRSC (Clean Reception System Circuit) Receive mode Setting SIRIUS ID (ESN) display Auxiliary Input Display Setting Text Scroll CD Read Setting Demonstration mode Setting 18 Basic Operations of remote 22 Accessories/ Installation Procedure 24 Connecting Wires to Terminals Installation Removing the Unit 12 Troubleshooting Guide Specifications 25 26 28 29 32 Tuner features Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning CD/Audio file/External disc control features 14 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Text/Title Scroll HD Radio control features Tuning 17 2| English 2Warning 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. English | 3 Safety precautions 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. About CD players/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. · You can damage both your unit and the CD changer if you connect them incorrectly. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. · Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. · When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. LX-bus connection The LX AMP and the sensor unit cannot be connected simultaneously. You must connect any of them at a time. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. NOTE This Class B digital apparatus complies with Canadian ICES-003. 4| English Notes · If you experience problems during installation, consult your Kenwood dealer. · If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. · Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 21). About SIRIUS Satellite radio tuner Refer to the instruction manual of SIRIUS Satellite radio tuner KTC-SR901/SR902/SR903 (optional accessory), when connected, for the operation method. · Refer to the sections of A models for operations. FM/ 4 SCRL ¢ SCRL + VOL AUD SET UP Q MENU OFF SCAN RDM REP CS DISP AUTO AME Reset button VOL AUD SET UP SCRL + CS DISP OFF SCAN RDM REP · We recommend the use of (page 19) to prevent theft. · The characters which can be displayed by this unit are A-Z 0-9 @ " ` ` % & * + ­ = , . / \ < > [ ] ( ) : ; ^-{}|~. · The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. ATT DIM Q MENU AUTO AME SRC 1-6 DISP/C.S. AM AUTO About DAB Tuner control Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. · Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry. After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed. and At the operation to press [DISP] button, press [AUTO] button. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. English | 5 About CDs Handling CDs · Don't touch the recording surface of the CD. Removing CDs When removing CDs from this unit pull them out horizontally. CDs that can't be used · CDs that aren't round can't be used. · CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. · Don't stick tape etc. on the CD. Also, don't use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. · CDs with coloring on the recording surface or that are dirty can't be used. · This unit can only play the CDs with . It may not correctly play discs which do not have the mark. · A CD-R or CD-RW that hasn't been finalized can't be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.) Burrs Burrs CD storage · Don't place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. · Store CDs in their cases. CD accessories Don't use disc type accessories. CD cleaning Clean from the center of the disc and move outward. 6| English About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is out of the specification, may not able to be played normally, or the file and folder names may not be displayed correctly. The maximum number of characters for this unit File/Folder name: 64 (Joliet: 32) characters ID3 Tag/Contents property (WMA): 30 characters · File/Folder name is the number of the characters including the extensions · ID3 Tag can only display the tag of Ver1.X. Playable Audio file · MP3, WMA: KDC-MP2028/KDC-MP228 · Attach the correct extension for the Audio file (MP3: ".MP3", WMA: ".WMA") · Do not attach the extensions to the other files besides the Audio file. If it is attached, the file, which is not the Audio file, will be played and outputs the loud noise, and then the speaker will be damaged. · The files with copy protection cannot be played. Limitation of structure for the file and the folder · · · · Maximum number of directory levels: 8 Maximum number of folders: 50 Maximum number of files per folder: 255 Maximum number of files and folders: 512 Playing order of the Audio file The Audio file is played in the order which is written by writing soft. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. Example 0: Folder CD (1) ¡: Audio file Playable MP3 file · MPEG 1/2 Audio Layer 3 file · Transfer bit rate: 8-320 kbps · Sampling frequency : 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz Playable WMA file · The file in accordance with Windows Media Audio (Except for the file for Windows Media Player 9 or after which applies the new functions) · Transfer bit rate: 48-192 kbps · Sampling frequency: 32, 44.1, 48 kHz ¡! 2 ¡" 3 Playable media · CD-ROM, CD-R, CD-RW (CD-RW with quick format cannot be used.) · When recording to the media up to the maximum capacity at once, the writing soft is set to "Disc at once". ¡# ¡$ 4 ¡% Playable disc format · · · · ISO 9660 Level 1/2 Joliet Romeo Long file name. · Playing order after ¡! play ¡"¡#¡$¡%... · Forward file search during ¡# play (Push the Control knob to [¢]) ¡$ · Forward folder search during ¡" play (Push the Control knob to [FM]) : 34... · When it is set to directory 4, skip to the folder before the same level by folder select (Push the Control knob to [4]) :2 · When it is set to directory 3, makes the level up by folder select (Push the Control knob to [AM]) :2 English | 7 General features Release button VOL Control knob SCRL + VOL AUD SET UP Q MENU OFF SCAN RDM REP CS DISP ATT DIM AUTO AME ATT/DIM Q SRC LOUD indicator ATT indicator Clock display Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Selecting the Source Press the [SRC] button. Source required SIRIUS tuner (Optional accessory) Tuner or HD Radio (Optional accessory) CD External disc (Optional accessory) Auxiliary input (Optional accessory) Standby (Illumination only mode) Display "SIRIUS" "TUNER" or "HD RADIO" "CD" "CD CH" "AUX EXT" "STANDBY" Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed, the Attenuator turns ON and OFF. When it's ON, the "ATT" indicator blinks. 8| English System Q You can recall the best sound setting preset for different types of music. 5 Exit Audio Control mode Press any button. Press the button which is not [VOL] knob and [ATT] button. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed, the sound setting switches. Sound setting Natural Rock Pops Easy Top 40 Jazz Display "NATURAL" "ROCK" "POPS" "EASY" "TOP40" "JAZZ" Audio Setup Setting the Sound system, such as Volume offset and Loudness. 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. · When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values. · "USER" :The values set on the