User manual KENWOOD KDC-W3537

CD-RECEIVER KDC-W4037 KDC-W3537 KDC-W3037 KDC-W311 KDC-W237 INSTRUCTION MANUAL © B64-3554-00/00 (E0/E20) Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator Audio Control Audio Setup Bass Boost Speaker Setting Switching Display Subwoofer Output Theft Deterrent Faceplate TEL Mute 3 4 7 Menu system 20 Tuner features Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning 11 RDS features Traffic Information Radio Text Scroll PTY (Program Type) Program Type preset Changing Language for PTY Function 13 Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Dimmer Switching preout Supreme Setting News Bulletin with Timeout Setting Local Seek Tuning Mode AF (Alternative Frequency) Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception Auxiliary Input Display Setting Text Scroll Selecting Russian Characters Built-in Auxiliary input Setting Power OFF Timer CD Read Setting Demonstration mode Setting Basic Operations of remote control Accessories/ Installation Procedure Connecting Wires to Terminals Installation/Removing the Unit Troubleshooting Guide Specifications 26 28 29 31 32 34 CD/Audio file/External disc control features 16 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Text/Title Scroll 2| English Safety precautions 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. · Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. · When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. ¤ · You can damage both your unit and the CD changer if you connect them incorrectly. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Do Not Load 8 cm (3 in.) CDs in the CD slot If you try to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. English | 3 Notes · If you experience problems during installation, consult your Kenwood dealer. · When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. · The characters which can be displayed by this unit are A-Z 0-9 @ " ` ` % & * + ­ = , . / \ < > [ ] ( ) : ; ^ - { } | ~. · The RDS feature won't work where the service is not supported by any broadcasting station. · The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. ¤ · Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. Before using this unit for the first time How to reset your unit · If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. · Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 25). Reset button 4| English About Audio file · Playable Audio file MP3 (.mp3), WMA (.wma) · Playable disc media CD-R/RW/ROM · Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. · Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from to . CD ( Handling CDs · Do not touch the recording surface of the CD. · Do not stick tape etc. on the CD, or use a CD with tape stuck on it. · Do not use disc type accessories. · Clean from the center of the disc and move outward. · When removing CDs from this unit, pull them out horizontally. · If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used · CDs that are not round cannot be used. ) : Folder Folder : Audio file Audio fi An online manual about audio files is put on the site, www.ke wood.com/aud of e/ this online . On manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well. . This unit may not correctly play discs which do not have the mark. · You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.) · CDs with coloring on the recording surface or CDs that are dirty cannot be used. · This unit can only play the CDs with English | 5 Notes About DAB Tuner control (KDC-W4037/KDC-W3537) This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry. After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed. and in At the operation to press [DISP] button, use [TI] button instead. This function cannot be used. Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. 6| English General features Release button Control knob Auxiliary input ATT indicator Clock display Power Turning ON the Power Press the [SRC] button. * An equipment such as a portable audio player can be connected to the auxiliary input terminal using a commercially available mini-plug (3.5ø). / · When the power is ON, the (page 20) is displayed as "CODE ON" or "CODE OFF". (Function of the KDC-W4037/KDC-W3537) / · This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle's battery. The time until full power OFF can be set in (page 25). · ** Function of KDC-W4037/KDC-W3537 · Use the mini-plug which is stereo type and does not have any resistance. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Tuner CD External disc (Optional accessory)** Auxiliary input* Auxiliary input (Optional accessory)** Standby (Illumination only mode) Display "TUNER" "CD" "CD CH" "AUX" "AUX EXT" "STANDBY" Volume Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. English | 7 General features Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. Press a button other than the [VOL] knob and [ATT] button. Audio Setup Setting the Sound system, such as Volume offset. 1 Select the source to adjust Press the [SRC] button. Audio Control 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Audio setup item Turn the [VOL] knob. Adjustment Item Low Pass Filter* Volume offset Display "LPF" "V-OFF" Range 80/120/160/Through Hz ­8 -- ±0 (AUX : ­8 -- +8) 4 Adjust the Audio item Turn the [VOL] knob. Adjustment Item Display Range Subwoofer level* "SW L" ­15 -- +15 System Q "NATURAL"/"ROCK"/ Natural/Rock/Pops/Easy/ "POPS"/"EASY"/ Top 40/Jazz "TOP40"/"JAZZ" Bass level "BAS L" ­8 -- +8 Middle level "MID L" ­8 -- +8 Treble level "TRE L" ­8 -- +8 Balance "BAL" Left 15 -- Right 15 Fader "FAD" Rear 15 -- Front 15 Exit Audio Control mode (Volume control mode) / · Volume offset: Sets each source's volume as a difference from the basic volume. · *Function of KDC-W4037 5 Exit Audio Setup mode Press the [VOL] knob for at least 1 second. Bass Boost Bass sound can be enhanced by one-touch operation. Press the [B.BOOST] button. When you press the button once, the current Bass Boost setting is displayed. Each time you press the button, the Bass Boost setting alternates. Setting Bass Boost 1 Bass Boost 2 Bass Boost off Display "BB-L L1" "BB-L L2" "BB-L OFF" / About System Q · You can recall the best sound setting preset for different types of music. · Change each setting value with the (page 9). First, select the speaker type with the Speaker setting. · "USER": This appears when Bass level, Middle level, and Treble level are adjusted. When "USER" is selected, these levels are recalled. · *Function of KDC-W4037 5 Exit Audio Control mode Press any button. 8| English Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. In CD & External disc source Information Disc title Track title Play time & Track number Clock Display "D-TITLE" "T-TITLE" "P-TIME" "CLOCK" 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. In Audio file source Information Song title & Artist name Album name & Artist name Folder name File name Play time & Track number Clock Display "TITLE" "ALBUM" "FOLDER" "FILE" "P-TIME" "CLOCK" 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the table below. Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "SP OFF" "SP 5/4" "SP 6*9/6" "SP OEM" In Standby/ Auxiliary input source Information Source name Clock Display "SRC NAME" "CLOCK" 4 Exit Speaker Setting mode Press the [VOL] knob. 3 Exit Switching Display mode Press the Control knob. / Switching Display Changing the information displayed. · Album name cannot be displayed in WMA file. · If the selected display item does not have any information, alternative information is displayed. 1 Enter Switching Display mode Press the Control knob for at least 1 second. "DISP SEL" is displayed. 2 Select the Display item Push the Control knob towards [4] or [¢]. Function of KDC-W4037 Subwoofer Output Turning the Subwoofer output ON or OFF. Push the Control knob toward [AM] for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF. When it is ON, "SW ON" is displayed. In Tuner source (KDC-W237) Information Frequency Clock Display "FREQ" "CLOCK" In Tuner source Information Frequency (MW, LW) Program Service name (FM) Radio text, Program Service name (FM) Clock Display "FREQ" "FREQ/PS" "R-TEXT" "CLOCK" English | 9 General features Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. TEL Mute The audio system automatically mutes when a call comes in. Removing the Faceplate Press the Release button. The faceplate unlocks, allowing you to detach it. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. ¤ · The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. · Keep the faceplate in its faceplate case while detached. · Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. / · To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 29). Projections Grooves 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. 10 | English Tuner features Control knob ST indicator Band display Frequency display Preset station number Tuning Selecting the station. Function of KDC-W237 Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time you press the button, the Tuning mode alternates between the modes shown in the table below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob towards [4] or [¢]. / · During reception of stereo stations the "ST" indicator is ON. English | 11 Tuner features Station Preset Memory Putting a station in the memory. Preset Tuning Recalling the stations in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. 2 Recall the station Press the desired [1] -- [6] button. 3 Put the frequency in the memory Press the desired [1] -- [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] -- [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. "A-MEMORY" is displayed. When 6 stations that can be received are put in the memory Auto Memory Entry closes. / · When the (page 23) is ON, only RDS stations are put in the memory. · When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band are not put in the memory. Likewise, when Auto Memory Entry is done in the FM3 band, RDS stations preset in FM1 or FM2 are not put in the memory. 12 | English Function of KDC-W4037/KDC-W3537/KDC-W3037/KDC-W311 RDS features Control knob PTY indicator TI indicator Traffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF. When traffic information is ON, "TI" indicator is ON. When a traffic information station is not being received the "TI" indicator blinks. When a traffic bulletin starts, "TRAFFIC" is displayed and the audio changes to traffic information. / · Traffic information can be switched when it is on the Tuner Source. However, you cannot switch the Traffic information during reception of the Traffic bulletin switched from the source other than the Tuner. Radio Text Scroll Scrolling the displayed radio text. Push the Control knob toward [FM] for at least 2 seconds. / · During reception of an AM station when the Traffic Information function is turned ON, the frequency changes to an FM station. · During reception of traffic information the adjusted volume is automatically remembered, and the next time the audio changes to traffic information, the volume automatically becomes the remembered volume. Receiving other traffic information stations Push the Control knob towards [4] or [¢]. English | 13 Function of KDC-W4037/KDC-W3537/KDC-W3037/KDC-W311 RDS features PTY (Program Type) Selecting the Program Type and searching for a station. / · Speech and Music include the Program type shown below. Music: No.12 -- 17, 26 -- 30 Speech: No.3 -- 11, 18 -- 25, 31 · You can put the Program Type in the [1] -- [6] button memory and for quick recall. Refer to the (page 14). · You can change the display language. Refer to (page 15). 1 Enter PTY mode Press the Control knob. During PTY mode the "PTY" indicator is ON. / · This function cannot be used during a traffic bulletin or AM reception. 3 Search for the selected Program Type station Push the Control knob towards [4] or [¢]. When you want to search for other stations, push [4] or [¢] of the Control knob again. 2 Select the Program Type Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Program Type alternates between the program types shown in the table below. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Program Type Speech Music News Current Affairs Information Sport Education Drama Culture Science Varied Pop Music Rock Music Easy Listening Music Light Classical Serious Classical Other Music Weather Finance Children's programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Display "SPEECH" "MUSIC" "NEWS" "AFFAIRS" "INFO" "SPORT" "EDUCATE" "DRAMA" "CULTURE" "SCIENCE" "VARIED" "POP M" "ROCK M" "EASY M" "LIGHT M" "CLASSICS" "OTHER M" "WEATHER" "FINANCE" "CHILDREN" "SOCIAL" "RELIGION" "PHONE IN" "TRAVEL" "LEISURE" "JAZZ" "COUNTRY" "NATION M" "OLDIES" "FOLK M" "DOCUMENT" / · When the selected Program Type is not found, "NO PTY" is displayed. Select another Program Type. 4 Exit PTY mode Press the Control knob. Program Type preset Putting the Program Type in the Preset button memory and quick recall. Presetting the Program Type 1 Select the Program Type to preset Refer to (page 14). 2 Preset the Program Type Press the desired [1] -- [6] button for at least 2 seconds. Recalling the preset Program Type 1 Enter PTY mode Refer to (page 14). 2 Recall the Program Type Press the desired [1] -- [6] button. 14 | English Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Control knob towards [FM] or [AM]. Each time you push the knob, the language alternates between the languages shown in the table below. Language English French German Display "ENGLISH" "FRENCH" "GERMAN" 4 Exit Changing Language mode Press the [TI] button. English | 15 CD/Audio file/External disc control features Control knob Disc number IN indicator Track number Play time Playing CD & Audio file When a disc is inserted Press the [SRC] button. Select the "CD" display. Function of KDC-W4037/KDC-W3537 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD CH" "MD CH" Disc player CD changer MD changer / · When a CD is inserted, the "IN" indicator is ON. Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. Eject the CD Press the [0] button. / · Refer to (page 5) for the Audio file by models you can play. · You can eject the disc for 10 minutes after switching off the engine. Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. / · Disc 10 is displayed as "0". · The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. 16 | English Fast Forwarding and Reversing Fast Forwarding Hold down toward [¢] with the Control knob. Release to resume the playback. Reversing Hold down toward [4] with the Control knob. Release to resume the playback. Accessory of KDC-W4037/KDC-W3537 Function of remote control Direct Track/File Search Doing Track/File Search by entering the track/file number. 1 Enter the track/file number Press the number buttons on the remote control. / · There is no sound while the Audio file is being searched. · The accurate track time is not displayed during fast forwarding or reversing of the Audio file. 2 Do Track/File Search Press the [4] or [¢] button. Cancelling Direct Track/File Search Press the [38] button. Track/File Search Searching for a song on the disc or in the Audio file folder. Push the Control knob towards [4] or [¢]. Function of KDC-W4037/KDC-W3537 Function of disc changers with remote control Direct Disc Search Doing Disc Search by entering the disc number. 1 Enter the disc number Function of disc changer/ Audio file Press the number buttons on the remote control. Disc Search/Folder Search Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Push the Control knob towards [FM] or [AM]. 2 Do Disc Search Press the [+] or [­] button. Cancelling Direct Disc Search Press the [38] button. / · Input "0" to select disc 10. English | 17 CD/Audio file/External disc control features Track/File/Disc/Folder Repeat Replaying the song, disc in the Disc changer or Audio file folder you are listening to. Press the [REP] button. Each time you press the button, the Repeat Play alternates between the modes shown in the tables below. Random Play Play all the songs on the disc or Audio file folder in random order. Press the [RDM] button. Each time you press the button, Random Play turns ON or OFF. When the Random mode is ON, "DISC RDM"/"FOLD RDM" is displayed. In CD & External disc source Repeat play Track Repeat Disc Repeat (In Disc Changer) OFF Display "TRAC REP" "DISC REP" "REP OFF" / · When you push the Control knob toward [¢], the next random song starts. In Audio file source Repeat play File Repeat Folder Repeat OFF Display "FILE REP" "FOLD REP" "REP OFF" Function of KDC-W4037/KDC-W3537 Function of disc changer Magazine Random Play Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time you press the button, the Magazine Random Play turns ON or OFF. When the Magazine Random mode is ON, "MGZN RDM" is displayed. Scan Play Playing the first part of each song on the disc or Audio file folder you are listening to and searching for the song you want to hear. / · When you push the Control knob toward [¢], the next random song starts. 1 Start Scan Play Press the [SCAN] button. "TRAC SCN"/"FILE SCN" is displayed. 2 Release it when the song you want to listen to is played Press the [SCAN] button. 18 | English Function of Audio file Text/Title Scroll Scrolling the displayed CD text or Audio file text. Push the Control knob toward [FM] for at least 2 seconds. Folder Select Quickly selecting the folder you want to hear. 1 Enter Folder Select mode Press the [F.SEL] button. "FLD SEL" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 2 Select the folder level Push the Control knob towards [FM] or [AM]. With the [FM] of the Control knob, you move 1 level down and with the [AM] of the Control knob, 1 level up. Selecting a folder in the same level Push the Control knob towards [4] or [¢]. With the [4] of the Control knob, you move to the previous folder, and with the [¢] of the Control knob, to the next folder. Returning to the top level Press the [3] button. Scrolling the folder name display Push the Control knob toward [FM] for at least 2 seconds. 3 Decide the folder to play Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays. Cancelling the Folder Select mode Press the [F.SEL] button. English | 19 Menu system Control knob RDS indicator Menu display Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. / · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting.) Also, the explanation for items that are not applicable ( etc.) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. Function of KDC-W4037/KDC-W3537 In Standby mode 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". Select 1 of them as the setting. You can continue by returning to step 2 and setting other items. Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. 20 | English / · When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. In Standby mode Manual Clock Adjustment 8 Do the step 4 through 7 step operation, and reenter the security code. "APPROVED" is displayed. The Security Code function activates. / · You can do this adjustment when the (page 22) is set as OFF. / · If you enter a Code different from your Security Code, you have to start over from step 4. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 1 Turn the power ON. 2 Do the step 4 through 7 step operation, and reenter the security code. "APPROVED" is displayed. Now, you can use the unit. 4 Exit Clock adjustment mode Press the [MENU] button. / · If an incorrect code is entered, "WAITING" is displayed, and the input prohibition periods shown in the table below is generated. English | 21 Menu system Function of KDC-W4037/KDC-W3537/ KDC-W3037/KDC-W311 In Standby mode Function of KDC-W4037 In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. Adjust the time manually. Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout. / · It takes 3 to 4 minutes to synchronize the clock. In Audio file source In Standby mode Supreme Setting When MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (MP3, or WMA), and adjustment is made for the bit rate used. Display "SPRM ON" "SPRM OFF" Setting Plays sound using the Supreme function. Plays the original sound stored in the audio file. DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF. Function of KDC-W4037 In Standby mode / · The sound effect may be imperceptible depending on the relationship between the audio file format and setting. Selectable Illumination Selecting the button illumination color as green or red. Display "KEY RED" "KEY GRN" Setting The illumination color is red. The illumination color is green. Function of KDC-W4037/KDC-W3537/ KDC-W3037/KDC-W311 News Bulletin with Timeout Setting Dimmer You can lower the brightness of the display by using the dimmer function. Display "DIM ON" "DIM OFF" Setting The display dims. The display doesn't dim. The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited. Display and Setting "NEWS OFF" "NEWS 00M" "NEWS 90M" ... 22 | English When you set "NEWS 00M" -- "NEWS 90M", the News Bulletin Interrupt function is ON. When the News Bulletin is ON, the "NEWS" indicator is ON. When the news bulletin starts, "NEWS" is displayed, and the tuner changes to the news bulletin. Function of KDC-W4037/KDC-W3537/ KDC-W3037/KDC-W311 AF (Alternative Frequency) When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display "AF ON" "AF OFF" Setting The AF function is ON. The AF function is OFF. / · If you choose the "20MIN" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. · The news bulletin volume is the same level that was set for (page 13). · This news bulletin function is only available if the desired station sends PTY-code for news bulletin or belongs to -Network sending PTY-code for news bulletin. · When the News Bulletin Interrupt function is ON, the tuner changes to an FM station. When the AF function is ON, the "RDS" indicator is ON. / · When no other stations with stronger reception are available for the same program in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn OFF the AF function in such a case. In Tuner mode Local Seek Only stations whose reception is good are searched in auto seek tuning. Display "LO.S OFF" "LO.S ON" Setting The local seek function is OFF. The local seek function is ON. Function of KDC-W4037/KDC-W3537/ KDC-W3037/KDC-W311 Restricting RDS Region (Region Restrict Function) You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. Display "REG ON" "REG OFF" Setting The Region Restrict Function is ON. The Region Restrict Function is OFF. Function of KDC-W4037/KDC-W3537/ KDC-W3037/KDC-W311 In Tuner mode / · If AF function is not restricted to the specified region and network, the AF function sets up to search the station with good reception in the same RDS network. Tuning Mode Sets the tuning mode. Tuning mode Auto seek Preset station seek Manual Display "AUTO 1" "AUTO 2" "MANUAL" Operation Automatic search for a station. Search in order of the stations in the Preset memory. Normal manual tuning control. English | 23 Menu system Function of KDC-W4037/KDC-W3537/KDC-W3037/ KDC-W311 · "AUX"/"AUX EXT" · "DVD" · "PORTABLE" · "GAME" · "VIDEO" · "TV" Auto TP Seek When the TI function is ON and the reception is poor while listening to a traffic information station, another traffic information station with better reception will be searched for automatically. Display "ATPS ON" "ATPS OFF" Setting The Auto TP Seek Function is ON. The Auto TP Seek Function is OFF. 6 Exit Auxiliary input display setting mode Press the [MENU] button.