AUDIO VIDEO SURROUND RECEIVER KRF-V7030D KRF-V6030D KRF-V5030D KRF-V4530D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. B60-4602-00 (EN) Remote Control Other Operations Preparations Before applying the power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. 2 Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future. Keep this manual handy for future reference. U.K. and Europe ............................................... AC 230 V only Russia ............................................................... AC 220 V only Preparations Accessories FM indoor antenna (1) AM loop antenna (1) For KRF-V7030D and KRF-V6030D Batteries (R6/AA) (2) Remote control unit (1) RC-R0610 For KRF-V5030D and KRF-V4530D Remote control unit (1) Batteries (R6/AA) (2) RC-R0510 Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Microcomputer malfunction If operation is not possible or an erroneous display appears, even though all connections have been made properly, reset the microcomputer referring to "In case of difficulty". · CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. Before applying the power Maintenance of the unit When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. Contents Caution : Read the pages marked safe operation. carefully to ensure 3 Before applying the power ................... 2 In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Safety precautions .............................................. 2 Unpacking .......................................................... 2 How to use this manual ...................................... 4 Special features .................................................. 4 Preparations Connecting audio components ........................... 8 Connecting video components ........................... 9 Connecting a DVD player .................................... 9 Digital connections ........................................... 10 Connecting to the AUX IN jacks (KRF-V7030 only) .............................................. 11 Connecting the antennas .................................. 11 Connecting the system control ......................... 12 Connecting the speakers .................................. 13 Preparing the remote control ............................ 14 Preparing for surround sound ............... 15 Speaker settings ............................................... 15 Normal playback .............................. 16 Preparing for playback ...................................... 16 Listening to a source component ..................... 17 Adjusting the sound .......................................... 17 Recording ...................................... 18 Recording audio (analog sources) .................... 18 Recording video ................................................ 19 Recording audio (digital sources) ...................... 19 Listening to radio broadcasts ............... 20 Operations Tuning (non-RDS) radio stations ....................... 20 Using RDS (Radio Data System) ....................... 20 Using the DISPLAY key .................................... 21 Presetting RDS stations (RDS AUTO MEMORY) ..................................... 21 Presetting radio stations manually .................... 22 Receiving preset stations .................................. 22 Receiving preset stations in order (P.CALL) ...... 22 Tuning by program type (PTY search) .............. 23 Surround modes ............................................... 24 Surround play ................................................... 25 DVD 6-channel playaback ................................ 26 Convenient functions ........................................ 27 Other In case of difficulty ........................... 28 Specifications ................................. 29 Quick start guide .............................. 31 Getting the most from your remote control .................... 33 Setup code chart .............................. 34 In case of difficulty ........................... 35 Remote operation of other components ... 36 Remote Control Remote Control RC-R0610 (KRF-V7030/ 6030D only) Other Ambience effects .............................. 24 Operations Preparations Names and functions of parts ................ 5 Setting up the system ......................... 8 Before applying the power 4 How to use this manual The manual covers the KRF-V7030D, KRF-V6030D, KRF-V5030D, and KRF-V4530D. Items such as functions, number of jacks, and remote control details differ somewhat between these models. To confirm the functions available on the model you have purchased, refer to the table below. Model name Remote Control Terminal Speaker out VIDEO 3 jacks Equipped Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! ¢ Dolby Pro Logic & Dolby 3 Stereo Front input Equipped This surround system reproduces theater-like surround sound from . video software marked The PRO LOGIC mode uses the built-in adaptive matrix circuit to steer the Left, Center, Right and Surround channel audio signals. The 3 STEREO mode will redirect the Surround signal to the front left and right speakers when only the front and center speakers are used. Preparations KRF-V7030D KRF-V6030D KRF-V5030D KRF-V4530D RC-R0610 2 systems (A, B) RC-R0610 2 systems (A, B) RC-R0510 1 system Not equipped Not equipped Not equipped Not equipped Dolby Digital (AC-3) The DOLBY DIGITAL (AC-3) mode lets you enjoy full digital surround from software processed in the Dolby Digital (AC-3) format. Dolby Digital (AC-3) provides up to 5.1 channels of independent digital audio for better sound quality and more powerful presence than conventional Dolby Surround. This manual is divided into four sections, Preparations, Operations, Other, and Remote Control. Preparations Shows you how to connect your audio and video components to the receiver and prepare the surround processor. We've tried to make setting up your system as easy as possible. However, since this receiver works with all of your audio and video components, connecting the system can be fairly complex. DTS (KRF-V7030D only) DTS (Digital Theater System) is a 5.1 channel digital audio format that provides five full-spectrum channels and one low-frequency (subwoofer) channel for unprecedented clarity, optimum channel separation and a (wide) dynamic range. In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or DVD disc (carrying the "DTS" marking) can be played in Digital Surround. Important: When a DTS disc is played on a CD, LD or DVD player, noise may be output from the analog output. It is recommended that you connect the digital output of the player to the digital input of this unit. Operations Shows you how to operate the various functions available from the receiver. Other Shows you additional information such as "In case of difficulty" (troubleshooting) and "Specifications". DVD 6-channel input If you own a DVD player equipped with 6-channel output, this receiver allows you to obtain the full surround sound impact of DVD source material featuring multi-channel encoding. Since the source signals are digital and each channel is input independently, the resulting ambience is far superior to what can be achieved with conventional surround sound systems. Remote Control (Separate booklet) (KRF-V7030D/KRFV6030D only) Includes the "Quick Start Guide," which shows you how to operate other components using the remote control, as well as a detailed explanation of all remote control operations. Once you have registered your components with the proper setup codes, you'll be able to operate both this receiver and your other AV components (TV, VCR, DVD player, LD player, CD player, etc.) using the remote control supplied with this receiver. Universal IR (InfraRed) remote control (KRF-V7030D/KRFV6030D only) In addition to the basic receiver, the remote control supplied with this receiver can also operate almost all of your remote controllable audio and video components. Just follow the simple setup procedure to register the components you have connected. RDS (Radio Data System) tuner The receiver is equipped with an RDS tuner that provides several convenient tuning functions: RDS Auto Memory, to automatically preset up to 40 RDS stations broadcasting different programs; station name display, to show you the name of the current broadcast station; and PTY search to let you tune stations by program type. PTY (Program TYpe) search Memory back up function Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet for approximately 3 days. · Power mode. · Input selector settings. · Device preset. · Picture output. · Speaker ON/OFF · Volume level. · BASS, TREBLE, INPUT level. · Subwoofer ON/OFF. · Dimmer level. · Monitor ON/OFF. · MD/TAPE settings. · 6CH/2CH input setting. · Listen mode setting. · Speaker settings. · Input mode setting. · Midnight mode setting. · Broadcast band. · Frequency setting. · Preset stations. · Tuning mode. Lets you tune stations by specifying the type of program you want to hear. Names and functions of parts Frequency display, Input display, Preset channel display, Surround mode display Speaker indicators SP A B TI.VOL MUTE CLIP RDS PTY AUTO SOUND indicator Band indicators PRO LOGIC indicator DIGITAL indicator 5 S.DIRECT indicator AUTO indicator MEMO. indicator ST. indicator TUNED indicator L LFE C S R SW LS RS FM AUTO SOUND DIGITAL AUTO AM PRO LOGIC S.DIRECT MEMO. MHz 3 STEREO MONITOR ST. TUNED kHz DOWN MIX DSP MUTE indicator RDS indicators Speaker selection indicators Input channel indicators Output channel indicators For KRF-V6030D, KRF-V5030D, KRF-V4530D DOLBY DIGITAL PROLOGIC 3 STEREO DOWN MIX indicator MONITOR indicator Display 3 STEREO indicator STEREO indicator MULTI CONTROL VOLUME CONTROL STANDBY MULTI CONTROL DTS DOLBY DIGITAL PROLOGIC 3 STEREO DOWN MIX INPUT SELECTOR SET UP INPUT MODE DIMMER MONITOR ON/STANDBY SOUND LISTEN MODE SOURCE DIRECT POWER ON OFF A SPEAKERS B PHONES BAND AUTO MEMORY S-VIDEO DOWN V AV AUX L ­ AUDIO ­ R UP For KRF-V7030D SPEAKER MUTE For KRF-V5030D, KRF-V4530D 3 STEREO indicator Lights when the receiver is in the 3 STEREO mode. DOWN MIX indicator § (For KRF-V7030D) Lights when the receiver is in the DOWN MIX mode. INPUT MODE key 0 Use to switch between the digital and analog inputs. DIMMER key (¶ Use to adjust the brightness of the display. Use to select the REC MODE. MONITOR key * Use to monitor the source that is connected to the VIDEO2/MONITOR jack. VOLUME CONTROL knob & PHONES jack * Use for headphone listening. SPEAKERS A/B keys ^ (For KRF-V7030D/V6030D) Use to turn the A/B speakers ON/OFF. ! SPEAKER key ^ (For KRF-V5030D/V4530D) Use to turn the speaker ON/OFF. MUTE key * (For KRF-V5030D/V4530D) Use to temporarily mute the sound. @ SOUND key ¶ Use to adjust the sound quality and ambience effects. # BAND key ) Use to select the broadcast band. $ AUTO key ) Use to select the auto tuning mode. % LISTEN MODE key Use to select the listeni ...