User manual KENWOOD KVC-1000

6.5-Inch WIDE TELEVISION KVC-1000 INSTRUCTION MANUAL © PRINTED IN JAPAN B64-1454-00 (E)(+) 00/12 11 10 9 8 7 6 5 4 3 2 1 99/12 11 10 9 8 7 6 Contents English Before Use Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . .4 Monitor Control Function Opening the Monitor . . . . . . . . . . . . . . . . . . . . . .5 Closing the Monitor . . . . . . . . . . . . . . . . . . . . . . .5 Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Switching the Monitor's Picture . . . . . . . . . . . . .5 Switching the TV/Video Picture Mode . . . . . . . . .5 Switching the AV Output Picture . . . . . . . . . . . . .6 Switching to the Angle/Screen Control Screen . .6 Turning the Monitor Picture Off . . . . . . . . . . . . . .6 Switching to the Source Control Screen . . . . . . .6 Changing the Background of the Source Control Screen Picture . . . . . . . . . . . . . . . . . . . . . . . . . .6 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . .6 Angle Control Screen Adjusting the Angle Position . . . . . . . . . . . . . . . .7 Adjusting the Slide Position . . . . . . . . . . . . . . . . .7 Turning the Automatic Open/Close Function On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Switching to the Screen Control Screen . . . . . . .7 Ending the Angle Control Screen . . . . . . . . . . . . .7 Screen Control Screen Adjusting the Picture Quality . . . . . . . . . . . . . . . .7 Turning the Dimmer Function On/Off . . . . . . . . .7 Switching to the Angle Control Screen . . . . . . . .7 Ending the Screen Control Screen . . . . . . . . . . . .7 RDS Setting Screen News Bulletin Function with PTY News Timeout Setting . . . . . . . . . . . . . . . . . . . . . . . . .12 Alternative Frequency Function . . . . . . . . . . . . .13 Restricting RDS Region . . . . . . . . . . . . . . . . . . .13 Auto TP Seek Function . . . . . . . . . . . . . . . . . . .13 Ending the RDS Setting Screen . . . . . . . . . . . . .13 Audio Control Function Audio Control Screen -1 Adjusting the Balance and Fader Levels . . . . . .14 Adjusting the Bass Level . . . . . . . . . . . . . . . . . .14 Adjusting the Treble Level . . . . . . . . . . . . . . . . .14 Switching to the Audio Control Screen -2 . . . . .14 Audio Control Screen -2 Turning the Loudness On/Off . . . . . . . . . . . . . .14 Setting the Preout . . . . . . . . . . . . . . . . . . . . . . .14 Setting the High-Pass Filter for Front and Rear Output . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Adjusting the Non-Fading Preout Level . . . . . . .14 Returning to the Audio Control Screen -1 . . . . .14 Ending the Audio Control Screen . . . . . . . . . . . .14 TV Control Function TV Control Screen (Main) Selecting the Bands . . . . . . . . . . . . . . . . . . . . . .15 Selecting the Video Inputs . . . . . . . . . . . . . . . . .15 Selecting the Channels . . . . . . . . . . . . . . . . . . .15 Station Preset Memory . . . . . . . . . . . . . . . . . . .15 Recalling a Preset Station . . . . . . . . . . . . . . . . .15 Switching to the TV Control Screen (Shift) . . . .15 Switching to the Next Source Mode . . . . . . . . .15 Switching to the Previous Source Mode . . . . . .15 Switching to the Menu Screen . . . . . . . . . . . . .15 TV Control Screen (Shift) Auto Memory Entry . . . . . . . . . . . . . . . . . . . . . .16 Selecting the Tuning Mode . . . . . . . . . . . . . . . .16 Switching to the TV List Screen . . . . . . . . . . . .16 Switching to the Name Set Screen . . . . . . . . . .16 Returning to the TV Control Screen (Main) . . . .16 TV List Screen Selecting the Band List . . . . . . . . . . . . . . . . . . .16 Selecting the Station . . . . . . . . . . . . . . . . . . . . .16 Returning to the Source Control Screen . . . . . .16 Selecting the Channels on the TV Picture Screen . . . . . . . . . . . . . . . . . . . . . . . . .17 System Setup Function Menu Screen Switching to the Menu Screen . . . . . . . . . . . . . .8 Switching to the Setup Menu Screen . . . . . . . . .8 Switching to the Audio Control Screen . . . . . . . .8 Switching to the Source Control Screen . . . . . . .8 Cancelling the Menu Screen . . . . . . . . . . . . . . . .8 Setup Menu Screen Switching to the System Setting Screen . . . . . . .8 Switching to the TV Area Setting Screen . . . . . .8 Switching to the RDS Setting Screen . . . . . . . . .8 Switching to the DAB Setting Screen . . . . . . . . .8 Switching to the Clock Adjustment Screen . . . . .8 Switching to the Touch Panel Adjustment Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Switching to the Code Security Screen . . . . . . . .8 Cancelling the Setup Menu Screen . . . . . . . . . . .8 System Setting Screen -1 Setting the AV Input . . . . . . . . . . . . . . . . . . . . . .9 Setting the AV Output . . . . . . . . . . . . . . . . . . . . .9 Setting the Built-In Speaker Mode . . . . . . . . . . . .9 Setting the Built-In Speaker Level . . . . . . . . . . . .9 Switching to the Setting Screen -2 . . . . . . . . . . .9 System Setting Screen -2 Setting the Auto Scroll Display Function . . . . . . .9 Setting the Touch Sensor Tone . . . . . . . . . . . . . .9 Setting the On Screen Display Function . . . . . . .9 Returning to the Setting Screen -1 . . . . . . . . . . .9 Ending the System Setting Screen . . . . . . . . . . .9 TV Area Setting Screen Selecting the Preset Bands . . . . . . . . . . . . . . . .10 Selecting the Television Area . . . . . . . . . . . . . .10 Ending the TV Area Setting Screen . . . . . . . . . .10 Clock Adjustment Screen Turning the Automatic Time Adjustment On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Adjusting the Time Manually . . . . . . . . . . . . . . .10 Ending the Clock Adjustment Screen . . . . . . . .10 Code Security Screen Mask Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Ending the Code Security Screen . . . . . . . . . . .11 Touch Panel Adjustment Screen Adjusting the Touch Position . . . . . . . . . . . . . . .12 FM/AM Tuner Control Function Tuner Control Screen (Main) Selecting the Bands . . . . . . . . . . . . . . . . . . . . . .18 Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Station Preset Memory . . . . . . . . . . . . . . . . . . .18 Recalling a Preset Station . . . . . . . . . . . . . . . . .18 Switching to the PTY Search Screen . . . . . . . .18 Switching to the Tuner Control Screen (Shift) . .18 Switching to the Next Source Mode . . . . . . . . .18 Switching to the Previous Source Mode . . . . . .18 Switching to the Menu Screen . . . . . . . . . . . . .18 Tuner Control Screen (Shift) Auto Memory Entry . . . . . . . . . . . . . . . . . . . . . .19 Turning the Monaural Reception On/Off . . . . . .19 Selecting the Tuning Mode . . . . . . . . . . . . . . . .19 Turning the Local Seek Function On/Off . . . . . .19 Traffic Information Function . . . . . . . . . . . . . . . .20 Presetting the Volume for Traffic Information/News . . . . . . . . . . . . . . . . . . . . . . .20 Returning the Tuner Control Screen (Main) . . . .20 PTY Search Screen Changing the Display Language to French or German . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Selecting the Type of Programme to be Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Seeking the Selected Programme Type . . . . . .21 2 Cancelling the PTY Search Screen . . . . . . . . . . .21 DAB Tuner Control Function DAB Setup Screen Automatic Switching from DAB to RDS . . . . . .22 Dynamic Range Control . . . . . . . . . . . . . . . . . . .22 Restricting the DAB Region . . . . . . . . . . . . . . . .22 DAB Control Screen (Main) Switching the Ensemble . . . . . . . . . . . . . . . . . .22 Selecting the Type of Programme to be Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Service Preset Memory . . . . . . . . . . . . . . . . . . .22 Turning the DAB PTY Search On/Off . . . . . . . . .22 Switching the DAB Control Screen (Shift) . . . . .22 Switching to the Next Source Mode . . . . . . . . .22 Switching to the Previous Source Mode . . . . . .22 Switching to the Menu Screen . . . . . . . . . . . . .22 DAB Control Screen (Shift) Selecting the Seek Mode . . . . . . . . . . . . . . . . .23 Auto Memory Entry . . . . . . . . . . . . . . . . . . . . . .23 Dual Channel Audio Switching . . . . . . . . . . . . . .23 Primary/Secondary Switching . . . . . . . . . . . . . .23 Presetting the Volume Level for Traffic Information/News . . . . . . . . . . . . . . . . . . . . . . .23 Returning to the DAB Control Screen (Main) . . .23 Disc Repeat Function . . . . . . . . . . . . . . . . . . . .24 Track Scan Function . . . . . . . . . . . . . . . . . . . . . .24 Disc Scan Function . . . . . . . . . . . . . . . . . . . . . .24 Track Random Play Function . . . . . . . . . . . . . . .25 Magazine Random Play Function . . . . . . . . . . .25 Switching to the Disc Changer Control Screen (Shift) . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Switching to the Next Source Mode . . . . . . . . .25 Switching to the Previous Source Mode . . . . . .25 Switching to the Menu Screen . . . . . . . . . . . . .25 Disc Changer Control Screen (Shift) Selecting the Name or Title Display for Discs . .26 To Scroll Manually . . . . . . . . . . . . . . . . . . . . . . .26 Selecting the Time Display for CDs . . . . . . . . . .26 Switching to the Disc List Screen . . . . . . . . . . .26 Switching to the Name Set Screen . . . . . . . . . .26 Returning to the Disc Changer Control Screen (Main) . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Disc List Screen Changing to the Disc List . . . . . . . . . . . . . . . . . .26 Selecting the Disc . . . . . . . . . . . . . . . . . . . . . . .26 Switching the Display for Discs . . . . . . . . . . . . .26 Returning to the Source Control Screen . . . . . .26 English Name Set Function Name Set Screen Station Name Preset (SNPS)/Disc Name Preset (DNPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Remote Control Function . . . . . . . . . . . . . . .28 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Troubleshooting Guide . . . . . . . . . . . . . . . . . .34 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .36 Disc Changer Control Function Disc Changer Control Screen (Main) Pausing and Restarting CD Play . . . . . . . . . . . .24 Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Fast Forwarding and Reversing Disc Play . . . . .24 Disc Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Track Repeat Function . . . . . . . . . . . . . . . . . . . .24 The control screens shown in this manual are for explanation purposes only. The actual screens and design differ. The TV must be set according to the TV Area Setting Screen (see page 10). 3 Safety Precautions English 2 WARNING Mask key If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. If this procedure is not carried out, the control panel of the unit will re-open even with your vehicle's ignition turned off. 2 CAUTION To prevent injury and/or fire, take the following precautions: · Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. · When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm2 (AWG18) or more to prevent cable deterioration and damage to the cable coating. · To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. 2 CAUTION Do not loose the "Mask Key". If power is disconnected from the unit, correct operation can only be restored by the "Mask Key's" signal. The "Mask Key" will also be required for service repair. NOTE If you send products in for repair that include a mask key, make sure to present the unit together with the mask key. Cleaning the Unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth. 2 CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not open the top or bottom covers of the unit. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. · When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · To prevent short circuits when replacing a fuse, first disconnect the wiring harness. · Do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit. · You cannot view video pictures whilst the vehicle is moving. To enjoy TV/video pictures, find a safe place to park and engage the parking brake. NOTE Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the indicator letters. Screen brightness during low temperatures When the temperature of the unit falls such as during winter, the liquid crystal panel's screen will become darker than usual. Normal brightness will return after using the monitor for a whilst. Loading and Replacing the Batteries for the Remote 2 CAUTION Do not set the remote on hot places such as above the dashboard. Loading and Replacing the Batteries 1. Use two "AAA" batteries. Slide the cover while pressing downwards to remove it as illustrated. 2. Insert the batteries with the ª and · poles aligned properly following the illustration inside the case. · If you experience problems during installation, consult your Kenwood dealer. · If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. Reset button 2 WARNING Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed. NOTE · The provided batteries are intended for use in operation checking, and their service life may be short. · When the remote controllable distance becomes short, replace both of the batteries with new ones. 4 Monitor Control Function 3 Opening the Monitor 1 Set the vehicle's parking brake. 2 Press the OPEN/CLOSE button. The monitor will open. 2 CAUTION English OPEN/CLOSE The gear shift lever or other parts may interfere with the monitor when it opens. If so, move the gear shift lever (being sure to do so safely) before operating the set. (The monitor is drawn back in automatically if it cannot be opened normally due to an obstacle.) NOTE The monitor cannot be opened unless the parking brake is set. 3 Closing the Monitor Press the OPEN/CLOSE button. The monitor will close. NOTE MODE SCRN · The monitor cannot be closed unless the parking brake is set. · The position to which the monitor slides or angle when the power is turned on can be set. (Refer to the angle control screen on ( Page 7).) FNC V.OFF V.SEL KVC-1000 6.5-inch WIDE COLOR LCD TELEVISION AV OUT SEL. 3 Power Off Hold down the OPEN/CLOSE button for one second or more to turn the set's power off. Press the OPEN/CLOSE button to turn the power on. TOUCH PANEL MULTIPLE SOURCE CONTROL VISUAL AUDIO 3 Switching the Monitor's Picture FNC MODE SCRN AV IN setting during "VD" (Page 9) w V.SEL Each time you press the V.SEL button, the monitor's picture switches as follows: Video input terminal (AV-IN 2) (3.5ø-Monaural) Audio input terminal (AV-IN 2) (3.5ø-Stereo) Television or Video 1 or Video 2 w Navigation (RGB pictures) AV IN setting during "NAV" (Page 9) w yyy ,,,,,, yyy ,,,,,, yyyy ,,,, · Just mode · Zoom mode · Cinema mode yyyyyy ,,,,,, yyyyyy ,,,,,, · Normal mode · Full mode Television or Video 1 or Video 2 w Navigation (Video 1 pictures) NOTE The video 1 will not select when the "IN-OUT" switch is set to "OUT" (Page 32). 2 CAUTION You cannot view television and video pictures whilst the vehicle is moving. To enjoy television and video pictures, find a safe place to park and engage the parking brake. 3 Switching the TV/Video Picture Mode Each time you press the MODE button, the picture mode switches between full, zoom, just, cinema and normal. NOTE yyyy ,,,, You cannot operate when the wide navigation system is connected. 5 Monitor Control Function English 3 Switching the AV Output Picture Each time you press the V.SEL button for one second or more, AV output picture switches as follows: w NORMAL : Picture selected from the TV control screen(Page 15) w TV w : Picture of television : Picture input from the front AV-IN terminal VD2 NOTE MODE SCRN FNC V.OFF V.SEL KVC-1000 6.5-inch WIDE COLOR LCD TELEVISION AV OUT SEL. The unit will not operate when the "IN-OUT" switch is set to "IN" (Page 32). TOUCH PANEL MULTIPLE SOURCE CONTROL VISUAL AUDIO 3 Switching to the Angle/Screen Control Screen Pressing the SCRN button will cause the angle control screen(monitor angle adjustment mode) or screen control screen (screen adjustment mode) to be displayed on the TV or video picture (Page 7). FNC MODE SCRN V.SEL 3 Turning the Monitor Picture Off Hold down the SCRN button for two seconds or more to turn the monitor's picture off. NOTE Video input terminal (AV-IN 2) (3.5ø-Monaural) Audio input terminal (AV-IN 2) (3.5ø-Stereo) The picture reappears when the one of the SCRN, FNC, MODE or V.SEL buttons is pressed. 3 Switching to the Source Control Screen Press the FNC button to switch to the source control screen (Page 15-27). 3 Changing the Background of the Source Control Screen Picture Each time you press the FNC button, you can select the background between 5 different patterns for the source control screen and menu screen. 3 Adjusting the Volume When the KTC-1000R/A907 is not connected to the system Press the 5 button to increase the volume of the built-in speaker. Press the button to decrease the volume of the built-in speaker. When the KTC-1000R/A907 is connected Press the 5 button to increase the volume of the KTC-1000R/A907. Press the button to decrease the volume of the KTC-1000R/A907. 6 Angle Control Screen A NG L E CTRL SCREEN A NG L E S L I DE Screen Control Screen SCREEN BRT TIN CO L ON DIM OFF OK CTRL A NG L E English AUTO OPEN - C LOSE O N OF F OK CON T BLK 3 Adjusting the Angle Position [ANGLE] Each time you touch [ 3 ], the monitor slants back one step. Each time you touch [ 2 ], the monitor slants forward one step 3 Adjusting the Picture Quality [BRT] Touch [ Touch [ [TIN] Touch [ Touch [ [COL] Touch [ Touch [ [CONT] Touch [ Touch [ [BLK] Touch [ Touch [ NOTE 3 ] for a brighter screen. 2 ] for a darker screen. 3 ] for a stronger green level. 2 ] for a stronger red level. 3 ] for a deeper colour. 2 ] for a paler colour. 3 ] for less contrast. 2 ] for stronger contrast. 3 ] for less blackness. 2 ] for a stronger black level. NOTE The angle can be adjusted in 9 steps. 3 Adjusting the Slide Position [SLIDE] Touch [ 3 ] to slide the monitor one step to the front. Touch [ 2 ] to slide the monitor one step to the back. NOTE This slide position can be adjusted in 3 steps. · The [ TIN ] and [ COL ] cannot be adjusted for the navigation screen or the graphic screens (Audio source control, etc.). · The [ TIN ] cannot be adjusted for the picture of PAL/SECAM. · Separate picture quality settings can be stored for the television, video 1, video 2, graphic screens and navigation screens and for day and night use. 3 Turning the Automatic Open/Close Function On/Off [AUTO OPEN-CLOSE] Touch [ ON ] or [ OFF ] to switch the function on and off. sO N sOFF NOTE 3 Turning the Dimmer Function On/Off Touch [ ON ] or [ OFF ] to switch the function on and off. sO N : Switch the ACC ON/OFF to open/close the monitor : Use the OPEN/CLOSE button to open/close the monitor sOFF NOTE : Switch head light ON, and switch to nighttime viewing screen picture : Leave the set in nighttime viewing screen picture If the shift lever or other parts of the vehicle interfere with the monitor when it opens, select [ OFF ]. When adjusting nighttime picture quality, switch this function ON and switch head lights ON. 3 Switching to the Screen Control Screen Touch [ SCREEN ] to switch to the screen control screen. 3 Switching to the Angle Control Screen Touch [ ANGLE ] to switch to the angle control screen. 3 Ending the Angle Control Screen Touch [ OK ] . 3 Ending the Screen Control Screen Touch [ OK ]. 7 System Setup Function English Menu Screen TI SOURC E Setup 1 2:0 0 SE L ECT RDS C L OC K Audio SECUR I T Y RTN SETUP RTN DAB T OUCH Setup Menu Screen S Y S T EM TV AREA 3 Switching to the Menu Screen 1 Press the FNC button on the monitor. The source control screen is displayed (Page 15-27). 3 Switching to the System Setting Screen Touch [ SYSTEM ] to switch to the system setting screen (Page 9). 2 Touch [ MENU ] to switch to the menu screen. 3 Switching to the TV Area Setting Screen Touch [ TV AREA ] to switch to the TV area setting screen (Page 10). 3 Switching to the Setup Menu Screen Touch [ Setup ] to switch to the setup menu screen. 3 Switching to the Audio Control Screen Touch [ Audio ] to switch to the audio control screen (Page 14). 3 Switching to the RDS Setting Screen Touch [ RDS ] to switch to the RDS setting screen (Page 12). 3 Switching to the DAB Setting Screen Touch [ DAB ] to switch to the DAB setting screen (Page 22). 3 Switching to the Source Control Screen Touch the marks to switch to the source control screen as follows: Touch this mark to switch to the Tuner control screen (Page 18). Touch this mark to switch to the DAB control screen (Page 22). Touch this mark to switch to the disc changer control screen (Page 24). Touch this mark to switch to the TV control screen (Page 15). Touch this mark to switch to the standby mode screen. The mark for the currently selected source is displayed in light pink. NOTE 3 Switching to the Clock Adjustment Screen Touch [ CLOCK ] to switch to the clock adjustment screen (Page 10). 3 Switching to the Touch Panel Adjustment Screen Touch [ TOUCH ] to switch to the panel adjustment screen (Page 12). 3 Switching to the Code Security Screen Keep touching [ SECURITY ] for two seconds or more to switch to the code security screen (Page 11). 3 Cancelling the Setup Menu Screen Touch [ RTN ] to switch to the menu screen. Up to two disc changers can be operated. 3 Cancelling the Menu Screen Touch [ RTN ] to switch to the source control screen for the current source. 8 System Setting Screen - 1 AV - I N V D AV - OUT NORM SP SP MOD E NORM LEVEL 10 RTN NAV T V VD2 System Setting Screen - 2 SCROL L AUTO BEEP O English MA NU N OF F NAV OF F ON SCREEN AUTO MA NU RTN S Y S T EM S Y S T EM 3 Setting the AV Input [AV-IN] Touch [ VD ] or [ NAV ] to switch the AV IN 1 terminal's input setting between Video and Navigation mode. sV D : Set the video mode s N A V : Set the navigation mode NOTE 3 Setting the Auto Scroll Display Function [SCROLL] This function permits the text to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. Touch [ AUTO ] or [ MANU ] to switch the function automatic and manual scrolling. s AUTO : Automatic scrolling s MANU : Manual scrolling · There is no display when the unit's "IN-OUT" switch is set to "OUT" (Page 32). · If a navigation unit is connected to AV IN, be sure to set it to [ NAV ]. 3 Setting the AV Output [AV-OUT] Touch [ NORM ], [ TV ] or [ VD2 ]. The video of the AV output terminal will be switched as follows: s NORM : Picture selected from the TV control 3 Setting the Touch Sensor Tone [BEEP] Touch [ ON ] or [ OFF ] to switch the function on and off. sO N : Touch sensor tone is turned on sOFF : Touch sensor tone is turned off screen (Page 15) sT V : Picture of the television s V D 2 : Picture input from the front AV-IN terminal NOTE 3 Setting the On Screen Display Function [ON SCREEN] Touch [ AUTO ] or [ MANU ] to switch the function between automatic and manual. s AUTO : When a button on the main unit or remote There is no display when the unit's "IN-OUT" switch is set to "IN" (Page 32). 3 Setting the Built-In Speaker Mode [SP MODE] s NORM : Sound with monitor picture s N A V : Sound with navigation sOFF : Switch off the built-in speakers 3 Setting the Built-In Speaker Level [SP LEVEL] Touch [ 3 ] to increase the volume. Touch [ 2 ] to decrease the volume. NOTE control unit is pressed, or the disc track is changed, the audio source control information is temporarily superimposed on the picture s MANU : When the lower centre of the screen is touched whilst a TV/video picture is displayed, the audio source control information is temporarily superimposed on the picture 3 Returning to the Setting Screen -1 Touch [ 2 ] to return to the setting screen-1. 3 Ending the System Setting Screen Touch [ RTN ] to return to the setup menu screen. No display when the "SP MODE" is set to "OFF". 3 Switching to the Setting Screen -2 Touch [ 3 ] to switch to the setting screen-2. 9 System Setup Function English TV Area Setting Screen TV1 TV2 · · · · · · · · A D G N N I S Y u e e e o c w u s n m t r e i g t m a h w l t o r r n e a a z s i k y r y n e l a 1 4 2 5 3 6 12 : 00 PM RESET Clock Adjustment Screen C LOCK · Be l g i um ·Fi n l and l and ·Po r t uga l d · Swe d e n r l and avia ·Spa i n SET RTN SYNC O C L OC K N OF F AD J UST RTN TV AREA 3 Selecting the Preset Bands Touch [ TV 1 ] or [ TV 2 ]. The band switches between the TV1 and TV2. 3 Turning the Automatic Time Adjustment On/Off [SYNC] With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also set the time manually if the automatic time adjustment function is turned off. The factory default is automatic time adjustment. Touch [ ON ] or [ OFF ] to switch the function on and off. sO N 3 Selecting the Television Area Select the area for video broadcast viewing. Touch [ 1 ] - [ 6 ] to select the channel setting for your country as follows. s1 (A1) Germany Iceland Portugal Netherlands Belgium Switzerland Austria Sweden Norway Denmark Finland Yugoslavia Spain Italy Albania United Kingdom Ireland France Russia Poland Hungary Czech Slovakia Bulgaria Roumania Greece PAL-B/G sOFF NOTE : Tune into an RDS station for 3 or 4 minutes The time adjusts automatically to the correct local time : Manual adjusting The time is not adjusted when the RDS station you are tuned to be not transmitting a time signal. Choose another RDS station in such a case. 3 Adjusting the Time Manually [CLOCK] PAL-I Touch [ 5 ] to advance the hours. Touch [ 5 ] to advance the minutes. s2 s3 (A2) (A3) (A4) (A5) s4 s5 SECAM-L SECAM-D/K C LOCK 12 : 00 Touch [ ] to make the hours go back. SECAM-B/G Touch the [ ] to make the minutes go back . s6 (A6) 3 Ending the TV Area Setting Screen Touch [ RTN ] to return to the setup menu screen. Setting the Minutes to "00": Touch [ RESET ] to set the minutes to "00". NOTE · Touch [ RESET ] whilst the minute is below "30" rounds it off, and whilst the minute is "30" or more rounds it up. · No display when the "SYNC" is set to "ON". 3 Ending the Clock Adjustment Screen Touch [ RTN ] to return to the setup menu screen. 10 Code Security Screen English The s y s t em is now wa i t i ng for you r MA S K KEY s i gna l . P l ease i npu t now . COD E SECUR I T Y RTN 3 Mask Key If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft. When using the unit for the first time: If this procedure is not carried out, the control panel of the unit will re-open even with your vehicle's ignition turned off. 1 Hold down the transmit button on the Mask Key until the half transmit level indicator lights up in the display. "System now checking for valid signal code"will be displayed. S y s t em now for check i ng code . s i gna l val id Transmission part Transmit button COD E SECUR I T Y RTN NOTE · Keep the Mask Key close to the signal sensor when you transmit the Mask Key signal. · If the Mask Key signal does not be received correctly, the display will return to "Code rejected. Please check MASK KEY". In this case, repeat the procedure in step 1. 2 Hold down the transmit button on the Mask Key again until the full transmit level indicator lights up in the display. "Code APPROVED" will appear in the display, with the Mask Key function turning on. If you press the RESET button or remove the battery: The first time you turn the unit on again, "The system in now waiting for your MASK KEY signal. Please input now." will appear in the display, indicating the setting mode has been entered. Repeat steps 1 and 2 above, and transmit the signal. You can start operating the unit again when "Code APPROVED" appears in the display. S y s t em now for check i ng code . s i gna l val id COD E SECUR I T Y RTN 3 Ending the Code Security Screen Touch [ RTN ] to return to the setup menu screen. 11 System Setup Function English Touch Panel Adjustment Screen RDS Setting Screen N EWS TOUCH P t t L l h h e PANEL T t t t o e o t ADJUST AF ease e Cen e Bu t f t - Bo uch r of n in t he om Co r n e r RESET O REG O ATPS O RDS N N SETUP OF F OF F RTN N OF F 1 0m i n CANCEL 3 Adjusting the Touch Position The touch panel can be adjusted if the position touched and the operation performed do not match. Accurately touch the mark at the lower left and the mark at the upper right, following the instructions in the messages. When the mark at the upper right is touched, the adjustment is completed and the system setup menu screen reappears. NOTE RDS (Radio Data System) RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received. RDS (Radio Data System) stations also transmit frequency data for the same station. When you are making long trips, this function automatically switches to the particular frequency with the best reception for the particular network of stations that you want to listen to. The data is automatically stored, allowing you to switch quickly to another RDS stations, broadcasting the same programme, that has better reception. These include stations stored in the station preset memory that you often listen to. · If [ CANCEL ] is touched without touching the button at the lower left, the adjustment is cancelled and the screen that was set before switching to the system setup menu reappears. · If [ CANCEL ] is touched after touching the button at the lower left, the button at the lower left reappears. · If [ RESET ] is touched, the settings are reset to the factory defaults and the setup menu screen reappears. EON (Enhanced Other Network) Stations that offer EON also transmit information about other RDS stations that have traffic information. When you are tuned to a station that is not transmitting traffic information, but another RDS station starts transmitting a traffic bulletin, the tuner automatically switches to the other station for the duration of the bulletin. Alarm When an emergency transmission (announcing disasters, etc.) is sent, all current functions are interrupted to allow the warning to be received. 3 News Bulletin Function with PTY News Timeout Setting [NEWS] You can arrange to have news bulletins interrupt your current listening source, including other radio stations. When the News Bulletin function is on, the PTY News Timeout setting allows you to set the interval during which further news interruption cannot take place. You can adjust the PTY news interruption period from 10 to 90 minutes for each journey. 12 Changing the Function Setting: Touch [ 2 ] or [ 3 ] repeatedly until the desired setting is displayed. Touch [ 3 ] to increase the interval, and the [ 2 ] to decrease it. OFF £ 00min £ 10min £ 20min £ 30min £ 40min £ 50min £ 60min £ 70min £ 80min £ 90min (min= minutes) When you select the news interruption timeout interval, the News function turns on and the NEWS indicator is displayed. When a news bulletin is received, the NEWS indicator will blinks and reception will begin at the preset volume. NOTE English · If you choose the " 20min " setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. Setting the interval at the "OFF" factory default indicates no News Timeout will be made, meaning that additional news bulletins will continue to be searched for. ·This function is only available if the desired station sends PTY-code for news bulletin or belongs to EON-Network sending PTY-code for news bulletin. 3 Alternative Frequency Function [AF] When poor reception is experienced, automatically switch to another frequency broadcasting the same programme in the same RDS network with better reception. The AF indicator is displayed when the AF function is turned on. Turning AF Function On/Off: Touch [ ON ] or [ OFF ] to switch the function on and off. sO N sOFF NOTE : AF function is turned on : AF function is turned off When no other stations with stronger reception are available for the same programme in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn off the AF function in such a case. 3 Restricting RDS Region (Region Restrict Function) [REG] You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. When the Region Restrict Function is on, the region is restricted and the REG indicator is displayed. Turning Region Restrict Function On/Off: Touch [ ON ] or [ OFF ] to switch the function on and off. sO N sOFF NOTE : Region restrict function is turned on : Region restrict function is turned off Sometimes stations in the same network broadcast different programmes or use different programme service names. 3 Auto TP Seek Function [ATPS] When the TI function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. This function is on, when unit is first powered on. Turning Auto TP Seek Function On/Off: Touch [ ON ] or [ OFF ] to switch the function on and off. sO N : Auto TP seek function is turned on sOFF : Auto TP seek function is turned off 3 Ending the RDS Setting Screen Touch [ RTN ] to return to the setup menu screen. 13 Audio Control Function English Audio Control Screen - 1 BA L / FAD F Audio Control Screen - 2 L OUD O N P R EOU T REAR HP - F OFF HP - R NF NF - LV - 1 0 220 150 BASS L R AUD I O R TREB L E RTN AUD I O RTN 3 Adjusting the Balance and Fader Levels [BAL/FAD] Each time you touch [ 2 ](L), the sound in the left channel is emphasized. Each time you touch [ 3 ](R), the sound in the right channel is emphasized. Each time you touch [ 5 ](F), the sound in the front channel is emphasized. Each time you touch [ ](R), the sound in the rear channel is emphasized. 3 Turning the Loudness On/Off [LOUD] This function amplifies low and high tones when the volume is turned down. The LOUD indicator is displayed on the source control screen, when the loudness function is on. Touch [ ON ] or [ OFF ] to switch the function on and off. sO N sOFF : Loudness function is turned on : Loudness function is turned off 3 Adjusting the Bass Level [BASS] Each time you touch [ 3 ], the bass level is increased. Each time you touch [ 2 ], the bass level is decreased. 3 Setting the Preout [PREOUT] Touch [ REAR ] or [ NF ] to switch the non-fading preout and rear preout. s REAR sNF 3 Adjusting the Treble Level [TREBLE] Each time you touch [ 3 ], the treble level is increased. Each time you touch [ 2 ], the treble level is decreased. : Set the rear preout : Set the non-fading preout 3 Setting the High-Pass Filter for Front and Rear Output [HP-F] [HP-R] Each time you touch [ 2 ] or [ 3 ], you can select the frequency to be cut, as follows: OFF " 40Hz " 60Hz " 80Hz " 100Hz " 220Hz " 180Hz " 150Hz " 120Hz " 3 Switching to the Audio Control Screen -2 Touch [ 3 ] to switch to the audio control screen-2. 3 Adjusting the Non-Fading Preout Level [NF-LV] Each time you touch [ 3 ], the non-fading sound increased. Each time you touch [ 2 ], the non-fading sound decreased. 3 Returning to the Audio Control Screen -1 Touch [ 2 ] to return to the audio control screen-1. 3 Ending the Audio Control Screen Touch [ RTN ] to return to the menu screen. 14 TV Control Function TV Control Screen (Main) TI VD ME NU TV 1 2:0 0 TV 12ch English 3 Switching to the TV Control Screen (Shift) Touch [ ] to swicth the TV control screen (Shift). TV1 A1 P1 NO N AME MANU LOUD 3 Switching to the Next Source Mode Touch the mark located at the lower side of to switch to the next source control screen. 3 Switching to the Previous Source Mode Touch the mark located at the upper side of 5 to switch to the previous source control screen. P1 P2 P3 P4 P5 P6 3 Switching to the Menu Screen Touch [ MENU ] to switch to the menu screen. 3 Selecting the Bands Touch [ TV ] to select the band. Each time you touch [ TV ], the band switches between the TV1 and TV2. 3 Selecting the Video Inputs Each time you touch [ VD ], the video input switches between the video 1 and video 2. NOTE The video 1 will not select when the "IN-OUT" switch is set to "OUT" (Page 32). 3 Selecting the Channels Auto Seek Tuning (AUTO1) Touch [ ¢ ] to seek for channels up the band. Touch [ 4 ] to seek for channels down the band. Preset station Seek Tuning (AUTO2) Touch [ ¢ ] to move to the next preset station (i.e., the one with the next highest number). Touch [ 4 ] to move to the last preset station (i.e., the one with the next lowest number). Manual Tuning (MANU) Touch [ ¢ ] to increase the channel by one step. Touch [ 4 ] to decrease the channel by one step. 3 Station Preset Memory Store the channel of the station currently being listened to. You can then recall that station with a single touch of a button. 1 Select the band/ station that you want to store. 2 Hold down preset station number [ P1 ] - [ P6 ] on which you want to store the station, for two seconds or more. NOTE You can store 6 stations in each of the TV1 and TV2 bands. 3 Recalling a Preset Station Touch the preset station number [ P1 ] - [ P6 ] for the desired station. The number of the recalled station is displayed. 15 TV Control Function English TV Control Screen (Shift) TI VD ME NU TV 1 2:0 0 TV 12ch 3 Selecting the Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The "AUTO1" indicator is displayed when auto seek tuning is selected, and the "AUTO2" indicator is displayed when preset station seek tuning is selected. Each time you touch [ SEEK ], the mode switches as follows: w TV1 A1 P1 NO N AME MANU AUTO 1 w (Auto Seek Tuning) (Preset Station Seek Tuning) (Manual Tuning) AME SEEK LIST NAME AUTO 2 w 3 Auto Memory Entry You can automatically store all the receivable channels in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 stations can be stored this way. MANU 3 Switching to the TV List Screen Touch [ LIST ] to switch to the TV list screen. 3 Switching to the Name Set Screen Touch [ NAME ] to switch to the name set screen (Page 27). NOTE 1 Select the band for auto memory entry. 2 Touch [ AME ]. [ ¢ ] and [ 4 ] blink.