User manual KENWOOD KVT-725DVD-B

KVT-725DVD KVT-725DVD-B MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL © PRINTED IN JAPAN B64-2851-00/00 (E)(AI) Contents Before Use ..............................................................4 About discs ............................................................6 Notes on playing MP3/WMA ................................7 Opening/Closing the Monitor and Power Switch ......................................................8 Removing/Attaching the Protection Panel..........9 KVT-725DVD Basic operation..............................10 Basic Operations of Remote Controller ............12 Switch Screen Mode............................................14 Control during DVD Video or Video CD Playback............................................16 · Displaying the DVD/VCD Playback screen · Displaying the Easy Control Panel · Displaying the DVD/VCD Control screen · DVD Disc Menu · VCD Zoom Control · Information Display · Direct Search Tuner Control........................................................22 · Displaying the Easy Control Panel · Displaying the Tuner Control screen · Displaying the Tuner Menu screen · Seek Mode · Auto Memory · Manual Memory · Preset Select · Direct Search · Traffic Information · Search for Program Type · Radio Text CD/MP3/WMA/Disc Changer Play Control........28 · Displaying the Easy Control Panel · Displaying the CD/MP3/WMA/Disc Changer Control screen · Displaying the CD/MP3/WMA/Disc Changer Menu screen · Set Disc Name · Directory List (during MP3/WMA play) · ID3/WMA TAG Display (during MP3/WMA play) · Disc Select (during play by disc changer) · Direct Search Mute Telephone ..................................................35 · Mute Telephone TV Control (with the optional accessory TV Tuner connected only)......................................36 · Displaying the TV Picture screen · Displaying the Easy Control Panel · Displaying the TV Control screen · Displaying the TV Menu screen · Seek Mode · Auto Memory · Manual Memory · Preset Select · Set Station Name DAB Tuner control (with the optional accessory DAB Tuner connected only) ............................40 · Displaying the Easy Control Panel · Displaying the DAB Tuner Control screen · Displaying the DAB Tuner Menu screen · Seek Mode · Auto Ensemble Memory · Service Preset Memory · Service Select · Language Filter · Search for Program Type · DAB Information · DAB Announcement Character Entry ....................................................46 · How To Use the Character Entry screen Source Select........................................................47 · Displaying the Control screen · Displaying the Source Select screen Adjusting the Monitor Display Position and Quality ........................................................48 · Displaying the Screen Control screen · Displaying the Angle Control screen Setup Menu Setup Menu ......................................................49 · Displaying the Control screen · Displaying the Setup Menu screen Audio Set Up ....................................................50 · Displaying the Audio Set Up screen · Crossover Network Setup DVD Setup ........................................................52 · Displaying the DVD SETUP 1 screen · Displaying the DVD SETUP 2 screen · Language Setup · Parental Level Setup System Setup ....................................................56 · Displaying the System Set Up 1 screen · Displaying the System Set Up 2 screen AV Interface ......................................................58 · Displaying the AV I/F 1 screen · Displaying the AV I/F 2 screen User Interface ....................................................60 · Displaying the User I/F 1 screen · Displaying the User I/F 2 screen · Touch Panel Adjust · Clock · Security Code Setup TV Setup (with the optional accessory TV Tuner connected only)......................................66 · Displaying the TV1 Area Set screen · Displaying the TV2 Area Set screen RDS Setup..........................................................67 · Displaying the RDS Set Up 1 screen · Displaying the RDS Set Up 2 screen DAB Set Up (with the optional accessory DAB Tuner connected only)......................................68 · Displaying the DAB Set Up screen · Announcement Selection AMP Control (with the optional accessory LX Power Amp connected only) ......................70 · Displaying the AMP Control screen Sound Effects Menu Sound Effects Menu..........................................72 · Displaying the Control screen · Displaying the Sound Effects Menu screen Audio Control ....................................................73 · Displaying the Audio Control 1 screen · Displaying the Audio Control 2 screen Equalizer ..........................................................74 · Displaying the Equalizer screen · Tone curve setup Zone Control ....................................................76 · Displaying the Zone Control screen Hands-Free Unit Control GSM control ......................................................78 · Displaying the Control screen · When called · When dialing · Calling by Phone Book · Addition to Phone Book · Editing the Phone Book · Quick Dialing · Hands Free Setup · Reading the SMS (Short Message Service) messages · Creating an SMS (Short Message Service) message Glossary ................................................................86 Troubleshooting Guide........................................87 Specifications ......................................................91 English 2 English English 3 Before Use 2WARNING To prevent injury and/or fire, take the following precautions: · Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. · When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other wires with an area of 0.75mm2 (AWG18) or more to prevent cable deterioration and damage to the cable coating. · To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. 2CAUTION Audio units you can control from the KVT-725DVD Receiver (in November of 2003): KDC-CPS89, KDC-CPS87, KDC-CPS85, KDC-C719, KDC-C717, KDC-C715, KDC-C669, KDC-C667, KDC-C665, KDC-C469, KDC-C467, KDC-C465, KDC-D301, KMD-D401, KTC-9090DAB, KDV-C820, KDC-C719MP, KCA-HF521, KPA-CP100 (Set the "O-N" switch to "N" position if provided.), KTC-V500N/P/E Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. English 1 5 Navigation units you can control from the KVT-725DVD Receiver (in November of 2003): KNA-DV3200, KNA-DV2200 2 1 Loading and Replacing the battery Use one lithium battery (CR2025). Insert the batteries with the + and - poles aligned properly, following the illustration inside the case. 2WARNING 6 3 2 Keep on slide 4 5 2 1 To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not open the top or bottom covers of the unit. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. · When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. · To prevent short circuits when replacing a fuse, first disconnect the wiring harness. · Do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit. · You cannot view video pictures whilst the vehicle is moving. To enjoy TV/video pictures, find a safe place to park and engage the parking brake. NOTE Pull out 4 Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed. Do not set the remote on hot places such as above the dashboard. · The provided batteries are intended for use in operation checking, and their service life may be short. · When the remote controllable distance becomes short, replace both of the batteries with new ones. Icons on the DVD discs Icon Description Indicates the region code where the disc can be played. 8 Number of voice languages recorded with the audio function. The number in the icon indicates the number of voice languages. (Max. 8 languages) Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the number of subtitle languages. (Max. 32 languages) Number of angles provided by the angle function. The number in the icon indicates the number of angles. (Max. 9 angles) Aspect ratios that can be selected. "LB" stands for Letter Box and "PS" for Pan/Scan. In the example on the left, the 16:9 video can be converted into letter box video. Cleaning the panel and monitor When the operator panel and monitor panels are dirty, wipe and clean them using a soft cloth (such as a commercially available silicon coated cloth). When contaminated excessively, clean them using a cloth dipped in a neutral detergent first, then remove the detergent using a dry cloth. Do not use a hard cloth and a volatile chemical (such as an alcohol). If used, the panel surface may be scratched or printed letters may be erased. 32 9 16:9 LB Cleaning the disc slot As dust can accumulate in the disc slot, clean it occasionally. Your discs can get scratched if you put them in a dusty disc slot. Unplayable discs This player cannot play back any of the following discs. · DVD-ROM/DVD-RAM discs · HQ-VCD discs · CDV discs (Only the audio part can be reproduced) · CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced) · Photo CD discs · DVD-Audio Also, you cannot play back the DVD-R/RW and DVD+R/RW discs if not recorded in the DVD-Video format. · If you experience problems during installation, consult your Kenwood dealer. · If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, discs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. Restrictions due to difference between discs Some DVD and VCD discs can be played only in Inhibition certain playback modes according to the icon intentions of the software producers. As this player plays discs according to their intentions, some functions may not work as intended by you. Please be sure to read the instructions provided with each disc. When an inhibition icon is displayed on the monitor, it indicates that the disc being played is under the restriction as described above. The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. Explanation of icons used on this manual Indicates the key operation on the receiver. Indicates the button you must touch. Indicates the key or joystick operation on the remote controller. The initial value of each setup is shown. Gives an additional information or an operation advice. Reset button This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Screen brightness during low temperatures When the temperature of the unit falls such as during winter, the liquid crystal panel's screen will become darker than usual. Normal brightness will return after using the monitor for a whilst. Time is displayed on each control screen in the 12 hour clock display type (with AM/PM displayed) or in the 24 hour clock display type (without AM/PM displayed) depending on the sales area. The display type cannot be changed. In this instruction manual, screens of the 24 hour display type are used as examples. 4 English English 5 About discs Handling discs · Don't touch the recording surface of the disc. Notes on playing MP3/WMA Removing discs When removing discs from this unit pull them out horizontally. This unit can play MP3 (MPEG1 Audio Layer 3)/WMA. Note, however, that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions. Entering file and folder names The code list characters are the only file names and folder names that can be entered and displayed. If you use any other character for entry, the file and folder names are not displayed correctly. They may neither be displayed correctly depending on the CD writer used. The unit recognizes and plays only those MP3/WMA which have the MP3/WMA extension (.MP3/.WMA). A file with a name entered with characters not on the code list may not play correctly. English · CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage than a normal music CD. Use a CD-R/RW, DVDR/RW, or DVD+R/RW after reading the caution items on the package etc. · Don't stick tape etc. on the disc. Also, don't use a disc with tape stuck on it. Discs that can't be used · Discs that aren't round can't be used. Acceptable media The MP3/WMA recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW. When using CD-RW, do full format not quick format to prevent malfunction. Writing files into a medium Acceptable medium formats · Discs with coloring on the recording surface or that are dirty can't be used. · This unit can only play the CDs with . It may not correctly play discs which do not have the mark. · A CD-R or CD-RW that hasn't been finalized can't be played. (For the finalization process refer to your CDR/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.) The following formats are available for the media used in this unit. The maximum number of characters used for file name including the delimiter (".") and three-character extension are indicated in parentheses. · ISO 9660 Level 1 (12 characters) · ISO 9660 Level 2 (31 characters) · Joliet (64 characters) · Romeo (128 characters) Up to 170 characters can be displayed in the long file name format. For a list of available characters, see the instruction manual of the writing software and the section Entering file and folder names below. The media reproducible on this unit has the following limitations: · Maximum number of directory levels: 8 · Maximum number of files per folder: 255 · Maximum number of characters for folder name: 64 · Maximum number of folders: 100 MP3/WMA written in the formats other than the above may not be successfully played and their file names or folder names are not properly displayed. When a medium containing MP3/WMA data is loaded, the unit checks all the data on the medium. If the medium contains a lot of folders or non-MP3/WMA files, therefore, it takes a long time until the unit starts playing MP3/WMA. In addition, it may take time for the unit to move to the next MP3/WMA file or a File Search or Folder Search may not be performed smoothly. Loading such a medium may produce loud noise to damage the speakers. · Do no attempt to play a medium containing a nonMP3/WMA file with the MP3/WMA extension. The unit mistakes non-MP3/WMA files for MP3/WMA data as long as they have the MP3/WMA extension. · Do not attempt to play a medium containing non MP3/WMA. When using a new disc If the disc center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Burrs Disc storage · Don't place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. · Store discs in their cases. MP3/WMA playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99", depending on your CD writer. Settings for your MP3/WMA encoder and CD writer Disc accessories Don't use disc type accessories. Do the following setting when compressing audio data in MP3/WMA data with the MP3/WMA encoder. · Transfer bit rate: MP3: 8 --320 kbps WMA: 48 --192 kbps · Sampling frequency: MP3: 32, 44.1, 48 kHz WMA: 32, 44.1, 48 kHz When you use your CD writer to record MP3/WMA up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to the maximum capacity at once, check Disc at Once. Play mode may not be possible when portions of the functions of Windows Media Player 9 or higher are used. Disc cleaning Clean from the center of the disc and move outward. Entering ID3 tag The Displayable ID3 tag is ID3 version 1.x. For the character code, refer to the List of Codes. 6 English English 7 Opening/Closing the Monitor and Power Switch Open the monitor English Removing/Attaching the Protection Panel Remove the protection panel [OPEN/CLOSE] key Close the monitor Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Two hooks Turn the power switch on Hold down the [SRC] key more than one second to turn it off. [SRC] key · Do not touch the moving components when you are opening or closing the monitor. If done, you will get hurt. · Do not try to open or close the monitor by hand. · You can automatically open or close the monitor when you turn on or off the ignition key (see page 48). · If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again. · Close the monitor first, then remove or attach the protection panel. · After you have removed the protection panel, you cannot operate the receiver. · After you have removed the protection panel, you can flash the burglar alarm lamp (see page 64). 8 English English 9 KVT-725DVD Basic operation When the monitor is open 1 Play Disc [Disc insertion slot] A disc is played when you insert it. 2 Stop to Play [7] key Stops to play. 3 Play/Pause [38] key Pauses and replays a disc. 4 Eject Disc [EJECT] key The disc is ejected. 5 Switch Video Sources [V.SEL] key The video sources are switched each time you press the key. 7 Volume Controls [+]/[­] key 8 Track/Station Selectors [4]/[¢] key Selects a music or chapter, track, or frequency. 9 Band/Folder Selectors [FM]/[AM] key Press the [FM] key to switch to the FM1/2/3 band or the next folder/disc. Press the [AM] key to switch to the AM band or the previous folder/disc. p Attenuator/Loudness [ATT]/[LOUD] key Attenuates the volume. Press it again to cancel muting. Press it for more than one second to turn the Loudness function on or off. If turned on, high and low tones are enhanced during low volume. q Traffic Infomation [TI] key Turns the Traffic Information function On or Off. (see page 26) * Optional accessory English 0 AM­ Clears the video image when pressed more than one second. When pressed again, the original image is redisplayed. 6 Switch Audio Source/Power Supply [SRC] key The audio sources are switched each time you press the key. w Screen Setup [SCREEN] key Displays the Screen Setup or Angle Setup screen. (see page 48) e Function [FNC] key The video sources are switched each time you press the key. When the monitor is closed Switches the source that is output at the AV OUTPUT terminal when it is pressed more than 1 second. r Switch Screen Mode/GSM [MODE]/[GSM] key The screen mode is switched. (see page 14) The GSM Control screen appears when you hold down the key more than 1 second. t Fast Forward/Rewind [FF]/[REW] key Fast forwards / rewinds songs, chapters or tracks. * Optional accessory 0 AM­ Hold down more than 1 second to turn the power supply Off. Push it again to turn power supply On. · The display turns on when you put the parking brake, except for the navigation system. · You cannot rewind while playing MP3/WMA. 10 English English 11 Basic Operations of Remote Controller 6 Joystick [DVD] t [DISC] Select a folder or a disc. [TV] FM: Switches to TV1, TV2 or VIDEO. [TUNER] FM: Switches to the FM1, FM2, or FM3 band. AM: Switches to the AM band. y [DISC] Selects a chapter, a track or a song. [TV] Select a channel. [TUNER] Selects a station. u [DVD] 1: Fast Backward (Rewind). The speed changes each time it is pressed. ¡: Fast Forward. The speed changes each time it is pressed. i [TV] [TUNER] -- o [DISC] Plays or pauses. [TV] [TUNER] Selects the Seek mode. (see page 24/38 for the ) ; [DVD] : Slow Backward. : Slow Forward. a Attenuator [ATT] key Attenuates the volume. Press it again to cancel muting. Call the stations from memory. English 1 Remote Control Mode selector Selects one of the following remote control modes. TV: TV source DVD: Built-in DVD/VCD/CD/MP3/WMA player source AUD: Tuner source or attached disc changer/disc player source 2 Volume Control Adjusts the volume. 3 [DISC] Stops to play the built-in disc player. 4 Switches over the sound source each time it is pressed. 5 Selects the Direct Search mode. (see pages 21/26/35 for ) Enters your selection from the DVD Disc Menu. 7 [DVD] [VCD] Returns to the previous screen when the DVD/VCD Disc Menu is used. 8 [DVD] Calls the Top menu of DVD Disc Menu. 9 Switch Video Sources [V.SEL] key (When 1 is set to "TV") The video sources are switched each time you press the key. * Optional accessory p [DVD] Calls the DVD Disc Menu. q [DVD] Each time you press the button, the angle switches. w [DVD] [VCD] Each time you press the button, the zoom ratio switches. e [DVD] Switches a subtitle language. r [DVD] Switches an audio language. [DVD] [VCD] [DISC] [TV] [TUNER] : An operation during DVD playback : An operation during VCD playback : An operation during DVD, VCD, CD, MP3/WMA or MD playback : An operation during TV source : An operation during FM/AM broadcasting source 12 English English 13 Switch Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. English Full picture mode [FULL] Justify picture mode [JUST] Cinema picture mode [CINEMA] Zoom picture mode [ZOOM] Normal picture mode [NORMAL] · When the Menu, Easy Control screen, or Navigation is selected, it is shown in the full-size display mode automatically. Their Screen mode cannot be changed. · The Screen mode can be set for each of DVD/VCD, TV, and video images. 14 English English 15 Control during DVD Video or Video CD Playback Control during DVD Video or Video CD Playback English Various control screens appear when you play back a DVD Video (DVD) or a Video CD (VCD) disc. Displaying the DVD/VCD Playback screen You can use the following operations when displaying DVD/VCD images. Plays back the DVD or VCD. EJECT TI SOURCE ATT Displaying the Easy Control Panel 1 Title Number Display 2 Chapter Number Display 3 Play Time Display 4 Forward Chapter Search Area Selects the next chapter. 5 Backward Chapter Search Area Selects the previous chapter. Display of Easy Control Panel DVD VIDEO Title 1 Chap 3 T 0 : 0 5 : 3 2 13 MODE: F U L L AV-OUT: AV - I N The Control Panel is displayed in a floating position of the DVD/VCD screen. e Adjusts the volume. r Switches the source. t Stops to play. y Rewinds or fast forwards. u Chapter Search (DVD) Searches for a chapter. Scene/Track Search (VCD) Selects a scene (when PBC is On) or a track (when PBC is Off). i Plays or pauses. The Easy Control Panel display is cleared when you touch the center of image display area. DVD playback screen DVD VIDEO 5 1 Title 1 Chap 3 MODE: F U L L 6 2 3 T 0:02:37 AV-OUT: AV - I N 4 6 DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (see page 20) 7 Information Display Button Area (see page 21) 7 14 15 SRC DVD VIDEO 16 Title 1 16 17 Chap 3 17 18 T 0 : 0 5 : 3 2 13 DVD VIDEO Title 1 Chap 3 T 0:02:37 VCD playback screen DVD VCD PBC VER2 8 10 Scene 255 MODE: F U L L 11 3 P 2:37 AV-OUT: AV - I N 9 8 Scene/Track Number Display 9 Forward Scene/Track Search Area Selects the next scene (when PBC is On) or track (when PBC is Off). p Backward Scene/Track Search Area Selects the previous scene (when PBC is On) or track (when PBC is Off). 12 DVD VCD Scene 255 P 2:37 q Zoom Control Button Area Displays the Zoom Control buttons (see page 21). w Information Display Button Area (see page 21) · For DVD/VCD playback, DVD/VCD picture selection, or controller key operations, see (see page 10). · The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated (see page 61). 16 English English 17 Control during DVD Video or Video CD Playback English Displaying the DVD/ VCD Control screen Plays a DVD/VCD using various functions. o Adjusts the volume. ; Ejects the disc from the built-in disc player. a Calls the Sound Effects Menu. (see page 72) s Switches the source. Displays the Source Select screen when touched more than one second. (see page 47) 19 DVD/VCD Control screen 19 d Calls the Setup Menu. (see page 49) f Fast Forwards or Rewinds. g Stops to play. When pressed twice, the disc is played from its beginning when you play it in the next time. h Selects a chapter, a scene or a track. When the DVD is paused, touch this button to start single-frame stepping. j Plays or pauses. k Slow Forwards or Backwards. (during DVD playback only) l Turns the PBC function of VCD On or Off. (when VCD ver2.0 or SVCD is in use only) / Switches the Repeat Play operations in the following sequence. DVD: Title Repeat, Chapter Repeat, Repeat Off VCD: Track Repeat, Repeat Off (Available when the PBC is off) z Scrolls the display text. x Switches the play time display in the following sequence. DVD: Title, chapter, remaining titles VCD: Track, disc, remaining discs (Effective only when the PBC function is off) c Title Number Display (DVD) v Chapter/Scene/Track Number Display b Play Time Display n Appears when a disc is inserted. m Function Indicator DVD V I DEO 21 Audio 23 Set Up 22 SRC 26 24 28 27 28 26 24 31 SCRL 25 1 3 : 5 0 IN 19 30 29 PBC REP Title 1 Chap 33 K E N W O O D T-REP 32 TIME 36 3 T0:05:20 34 37 35 20 19 18 English English 19 Control during DVD Video or Video CD Playback DVD Disc Menu English Selects an option from the DVD Disc Menu. 1 Displays the Disc Menu Control screen Menu Ctrl 2 Select Disc Menu options Disc Menu VCD Zoom Control Displays an enlarged VCD screen. Displays the Zoom Control screen Zoom Control Button Area (page 16) Direct Search You can search for a DVD/VCD chapter, scene or track by entering its number. 1 Selects the Direct Search mode Disc Menu Control Buttons Area (page 16) Menu Ctrl 3 6 To p 1 Menu 5 Return 1 Menu Ctrl 3 SUB 10/10 4 Audio 1/1 3 3 ZoomC t r l 2 2 4 2 3 7 2 Enter Cancel Exit 1 2 Zoom 5 Zoom 2 Angle 1/1 6 3 Exit 1 Calls the Menu Control. 2 Switches the picture angle. (during program playback only) 3 Switches the caption language. (during program playback only) 4 Switches the voice language. (during program playback only) 5 Displays the Zoom Control screen. 6 Clears the Disc Menu Control. 1 Calls the Menu. (during DVD playback only) 2 Returns to the Disc Menu Control screen. 3 Selects a menu option. 4 Enters your menu selection. 5 Returns to the previous menu screen. 6 Displays the Top Menu. 7 Clears the Disc Menu Control. Off Exit The following items can be searched directly each time it is pressed. DVD: Title, Chapter, Time, Direct number VCD (when PBC is On): Scene, Direct number VCD (when PBC is Off): Track, Time However, the direct search may not be supported for some discs. 1 Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. 2 Enter a number or time -- Zoom Control Information Display Zoom When playing back a VCD, enter a PBC screen number (if PBC is On) or a track number (if PBC is Off). Displays the DVD and AV information. Information Display Button Area (Page 16) 3 Search ZoomC t r l 2 2 2 The information is displayed for 5 seconds. The operation ends automatically if you do not operate within 10 seconds. 1 Zoom Off Cancel 3 2 4 Exit 1 Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Returns to the Disc Menu Control screen. 4 Clears the Disc Menu Control. 20 English English 21 Tuner Control Tuner Control English Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel The Tuner Control Panel is displayed in a floating position of the selected picture. 1 Adjusts the volume. 2 Switches the source. 3 Switches the band (to AM or FM1/2/3). 4 Tunes in a station. 5 Switches the Seek mode. (see page 24 for the ) 1 Displaying the Tuner Control screen You can tune in a station using various functions. 6 Adjusts the volume. 7 Calls the Tuner Menu. 8 Calls the Sound Effects Menu. (see page 72) 9 Switches the source. Displays the Source Select screen when touched more than one second. (see page 47) 6 Tuner Control screen 6 Displaying the Easy Control Panel p Calls the Setup Menu. (see page 49) q Switches to the FM1/2/3 band. w Switches to the AM band. MODE: F U L L AV-OUT: AV - I N · For receiver key operations, see (see page 10). · The Easy Control Panel display is cleared when you touch the center of image display area. TUNER 8 Audio 10 Set Up 9 SRC 14 Next 13:50 Menu 7 FM 11 13 13 AM 15 LO.S FM1 12 16 17 18 19 20 AME SEEK DISP SCRL MONO Preset 1 98.1 MHz 22 AUTO1 e Tunes in a station. Use the (see page 24) to change the frequency switching. 1 r Switches between Function buttons to use. 2 SRC TUNER FM1 3 3 4 AM FM Preset 1 4 5 SEEK to 6 buttons and 98.1 MHz 1 6 1 6 3 4 5 6 2 21 t Turns the Local Seek function On or Off y Selects the Auto Memory mode. (see page 24 for the ) u Switches the Seek mode. (see page 24 for the ) i Selects the Program Service Name, or Radio Text mode for text display. o Scrolls the display text. ; Select the Monaural reception mode. (Only when receiving the FM broadcast) 1 6 to buttons appear, you can call a When up the stations from memory. For memory of broadcasting stations, see (see page 24) or (see page 25). Displaying the Tuner Menu screen You can select menu options using various functions. Menu s Seek Mode Indicator d Selects options from various function menus. f Returns to the Tuner Control screen. The available functions vary depending on the model used (the tuner specifications and the broadcasting system that can be received). Tuner Menu screen 23 TUNER Audio Set Up Preset PTY Se l e c t Sea r c h 24 SRC Rad i o T e x t 22 English English 23 Tuner Control Seek Mode English Sets a station selection. SEEK Auto Memory Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory FM AM Preset Select Lists and tunes in stations in memory one after the other. 1 Call the Tuner Menu If SEEK is not shown, touch Next . The mode is switched each time you touch the button. FM AM Menu 2 Store in memory 2 Select the Auto Memory mode 2 Call the Preset Select Menu 1 AUTO 1 Tunes in a station with good reception automatically. Tune in stations in memory one after another. Switches to the next channel manually. If AME -- 6 Preset Next Se l e c t If AUTO 2 AME 1 to 6 are not shown, touch . 1 is not shown, touch Next . Continue to touch until the memory number appears. TUNER Audio Set Up FM3 FM3 FM3 1) 100. 5 MHz 2) 100. 5 MHz 3) 100. 5 MHz 4) 100. 5 MHz 5) 100. 5 MHz 6) 100. 5 MHz 3 Start Auto Memory 4 Menu MANUAL SRC 2 2 3 FM3 FM3 FM3 FM98.1 Touch or . 1 Tunes in the displayed station. 2 Switches the band of the displayed station list. 3 Band Display. 4 Returns to the Tuner Menu. Auto Memory terminates when 6 stations are stored or when all stations are tuned in. The operation ends automatically if you do not operate within 10 seconds. 24 English English 25 Tuner Control Direct Search English Tunes in a station when its frequency is entered. 1 Select a band Traffic Information When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. When the traffic bulletin starts... The Traffic Information screen appears automatically. Traffic Information screen Search for Program Type A program is tuned when you set its program type. 1 Call the Tuner Menu Radio Text You can display the radio text. 1 Call the Tuner Menu Menu Menu 2 1 Display the Radio Text 2 Selects the Direct Search mode 1 TUNER 2 Audio 4 Set Up 3 SRC 13:50 2 Call the PTY Search Menu Rad i o T e x t PTY Sea r c h 3 Enter a frequency 1 TUNER Tr a f f i c I n f o m a t i o n 1 Audio Set Up 1 TUNER All Speech All Music Audio Set Up 2 Menu Rad i o text: