COMPACT HI-FI SYSTEM XD-SERIES XD-653/ XD-753 XD-503/ XD-553 XD-303/ XD-353 XD-A33/ XD-A53/ XD-A73 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. P COMPACT DIGITAL AUDIO TEXT B60-4473-00 01 MA (K, P, Y, M, X, T, E2) 9911 2 Before applying power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. U.S.A. and Canada ............................................ AC 120 V only Australia ............................................................. AC 240 V only Europe and U.K. ................................................. AC 230 V only China.................................................................... AC 220 V only *Other countries ........... AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse. 2.The fuse cover must be refitted when replacing the fuse in the moulded plug. 3.Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. IMPORTANT: The wires in the mains lead are colored in accordance with the following code: Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a threepin plug. *AC voltage selection The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance with the following direction. AC voltage selector switch Move switch lever to match your line voltage with a small screwdriver or other pointed tool. AC 110120V~ AC 110120V~ AC 220240V~ Preparation section AC 220240V~ Note: Our warranty does not cover damage caused by excessive line voltage due to improper setting of the AC voltage selector switch. Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The marking of products using lasers (Except for some areas) CAUTION INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. The marking is located on the rear panel and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. Inside this laser product, a laser diode classified as Class 3A laser radiation is contained as alerted by the internal caution label shown above. To avoid exposure to laser beams, do not open the cover. Before applying power 3 Contents Caution : Read the pages marked carefully to ensure safe operation. Preparation section Before applying power .............................. 2 Safety precautions ...................................... 2 Special features ............................................... 4 Handling of discs and tapes ............................ 5 System connection........................................... 6 Accessories ....................................................................... 6 Connection of the system accessories ......................... 6 Connection with other components (optional or commercially-available equipment) ..................................... 8 Application section Playback of CD................................................ 32 Listening in the desired sequence (program playback) ................................................... 32 Repeated playback ......................................................... 34 Random playback............................................................ 36 R.D.S. (Radio Data System) (For U.K. and Europe) ................................. 37 Preparation section Searching for a desired program type (PTY search) ................................................................ 38 Controls and indicators ................................. 10 Main unit ........................................................................... 10 Display .............................................................................. 12 Remote control unit ........................................................ 13 Convenient CD recording ............................... 40 Selection of the recording type .................................... 40 Recording only desired titles (CD ONE TRACK RECORDING) ................................. 41 Recording of an entire CD (CD DIRECT RECORDING) ..........................................42 Recording the programmed titles (CD PROGRAM RECORDING) .................................... 43 Operation of remote control unit .................. 14 Operation of jog dials ..................................... 15 Clock adjustment............................................. 16 Changing the display language ................... 17 Effective sound adjustment .......................... 44 Balance adjustment......................................................... 44 Input level adjustment ....................................................45 Listening to music with desired tone and sound field/ Switching the display (Equalizer effect and 3D surround effect) .................................................................................46 Equalizer pattern setting and saving............................ 47 Basic section Basic section Let's have sound .............................................. 18 Basic operation ............................................................... 18 Playback of CD ................................................................ 20 Tape playback .................................................................. 22 CHANNEL SPACE setting ................................................25 Receiving broadcast station ..........................................26 Timer operation............................................... 48 Sleep timer ........................................................................ 48 Timer programming.......................................................... 49 Auto Power Save .............................................................. 50 Application section Let's record ...................................................... 28 Recording on TAPE ......................................................... 28 Copying tape (Tape dubbing) ......................................... 31 Knowledge section Important Items ............................................... 52 Maintenance .................................................................... 52 Reference ......................................................................... 52 In case of difficulty ........................................ 53 Specifications ................................................. 57 Knowledge section As an ENERGY STAR® Partner, Kenwood Corporation has determined that this products meets the ENERGY STAR® guidelines for energy efficiency. This product can save energy. Saving energy reduces air pollution and lowers utility bills. 4 Special features Simplified operations using large-sized, Jog Dial Multi-control jog dial (For use in selecting a function) This dial allows you to set the CD program and timer-related operations while observing the operating conditions shown by the display. Multi language display function The menu items for the operation can be displayed in any of five of languages, English, French, German, Spanish, and Italian. Large-sized color display panel Preparation section The large sound level meter represents the movement in music with brilliant colors to offer the joy of viewing the music at the same time as listening. 3-Disc carousel CD player Three discs can be set. There are various ways for enjoyment at the time of program playback, repeat playback, random playback, etc. Convenient timer functions Timer programming : Timer playback, AI timer playback, and timer recording can be programmed. ÷ AI timer playback : When the unit is turned ON by the timer, the sound level increases gradually. Sleep timer : Useful when you want to go asleep while listening to music. Auto power save When the power is ON and neither recording nor playback is executed for 30 minutes or more, the power is switched off automatically. CD text information display (CD TEXT compatibility) The text information (disc title and track titles) recorded into CDs can be displayed. Demonstration When the power supply is restored after a power failure or the power cord is unplugged and plugged in again during use, this unit automatically starts the demonstration function (display only). During the demonstration, the display changes in sequence but the sound mode does not change. To cancel : Press the DISPLAY/DEMO key during demonstration to stop it. DISPLAY /DEMO To switch on and off the demonstration : Turn the unit OFF (STANDBY mode) and press the DISPLAY/DEMO key. Each press of the key switches the demonstration as shown below. 1 "Demo on" (Demonstration on) 2 "Demo off" (Demonstration off) Handling of discs and tapes Disc handling precautions Handling Hold the discs so that you do not touch the playing surface. Label side Playing side Sticker Do not attach paper or tape to either the playing side or the label side of the discs. 5 Discs which can be played with this unit CD (12 cm, 8 cm), and the audio part of CDV, CD-G, CD-EG and CD-EXTRA. Use discs that comply with the IEC standard, for example a disc carrying the marking on the label surface. COMPACT COMPACT DIGITAL AUDIO DIGITAL AUDIO Never play a cracked or warped disc During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause a malfunction. Preparation section Sticky paste Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Disc accessories The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Notes on cassette tape Safety tab (accidental erasure prevention tab) After an important recording has been finished, break the safety tab, to prevent the recorded contents from being erased or recorded on accidentally. To store cassette tapes Do not store the tapes in a place which is subject to direct sunlight, or near equipment that generates heat. Keep the cassette tapes away from any magnetic field. N S For A side For B side When there is slack in the tape In such a case, insert a pencil into the reel hole and wind the reel hub to remove the slack. To re-record Apply tape only to the position where the tab has been removed. 1.Cassette tapes that are longer than 100 minutes Notes Since tapes that are longer than 100 minutes are very thin, the tape could adhere to the pinch roller or be easily cut. It is recommended that these tapes not be used with this unit to prevent possible damage. 2.Endless tapes Do not use an endless tape, as this could damage the mechanism of the unit. 6 System connection Accessories FM indoor antenna (1) AM loop antenna (1) Remote control unit (1) Batteries (R6/AA) (2) AC plug adaptor (1) Speaker cords (2) (XD-653 only) Preparation sec ...