1 1 DVD PLAYER DP-1000 2 Video Connection DP-1000 Connections 3 TV 1. 2. 3. 4. Display CD Tray Eject/Stop Play/Pause Presentation 4 1 2 3 6 7 8 4 5 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. Standby Open/Close Title/Menu Menu Back Up Arrow Left Arrow Enter Right Arrow Down Arrow Rewind Play/Pause Fast Forward Previous Chapter Stop Next Chapter Select Lang/Audio Next Picture Select Subtitles Select Angle Zoom Repeat Unused Setup Clear Input Search Increase Volume Decrease Volume If your DVD Player is correctly connected (see the chapter on cable connections), a menu will appear when you turn on the DVD Player. The menu installs the most important settings for your TV set and language. Quick Setup Note: If this menu does not appear when you start the DVD Player, recheck the cable connections. Note: Try connecting your TV set using the Composite Video cables. Composite Video always produces a picture. 2 english français 1 3 4 Language Select the language that will be used whenever you open the DP-1000's built-in menus. Use the arrow buttons on the remote control to move the rectangular frame to the language you wish to select and press ENTER. 1 3 5 4 2 Accessories Connecting your KiSS DP-1000 DVD player to your TV can be done with any of the cables below. (Only one cable can be connected at a time). 1. RGB via SCART 2. S-Video (the cable is an extra accessory) 3. Composite via SCART 4. Composite Video 5. Component Video (the cable is an extra accessory) Connection Select your TV set's connection. Your options are SCART, S-Video and Component Video. The connection depends on the inlets available on your TV set. (If you select SCART, this connection also includes VGA and Composite Video). 2 1 3 45 6 7 9 10 11 14 12 15 13 16 Audio Connection DVD-Player KiSS DP-1000 Amplifier Batteries for the remote control [size "AAA" (R6P)] DP-1000 Remote control 1. 2. 3. 4. 5. 6. 7. AC Input Coaxial Output for Amplifier Optical Output for Amplifier Ordinary Stereo Output S-Video Output for TV set Component Video for TV set SCART for TV set TV This screen presents two different types of TV formats: 4:3 (normal) or 16:9 (wide screen). Note: Some 4:3 TV screens can display 16:9 format. 18 17 19 20 21 22 23 24 25 26 28 27 1 8 Power Cable Scart Cable Connecting your KiSS DP-1000 DVD player to your amplifier can be done with any of the cables below. (Only one cable can be connected at a time). 6. Optical output (the cable is an extra accessory) 7. Coaxial output (the cable is an extra accessory) 8. Analogue Stereo 2 3 4 Note: Certain functions will only work if supported by the media. Audio If your TV set is connected via SCART, your TV is automatically provided with sound. If you would rather use an amplifier to reproduce the sound, you have two options to choose from: the phono jack or one of the two digital outputs. Note: The default Audio choice should be stereo unless your player is connected to a digital amplifier 6 7 The DVD Player is equipped with a VFD display which indicates the current ongoing activities. 1. 2. 3. 4. Indicates the selection of the disk being played Indicates the number or chapter being shown/played Indicates the current function, such as play or stop Indicates the type of media being played Composite Video Audio Cable 5 Advanced Setup You can always access the Setup menu and adjust the DP-1000 to your specific requirements and hardware. When DP-1000 appears on the main screen, press the SETUP button on your remote control, and a menu will appear with the available options. The orange frame shows your position on the menu. Use the arrow buttons to move the frame and select by pressing the ENTER button. The settings on some of the menus have already been determined under Quick setup, but there are several settings available under Advanced setup as well. 6 DVD Menu DVD films are normally supplied with a regional code (1), (2), etc., and can only be played on DVD players with the same regional code. You can see the region on the back of the player. Region tags appear as follows: Playing Media 7 STEP This function not used A number of advanced functions are located on the lower section of the remote control. These functions are described below. Some functions may not work with all media formats. Support More information or assistance is available at KiSS Technology's website under Support for DVD Player. Address: www.kiss-technology.com Updates At our website, you can update the DVD Player's firmware/operating system with the latest new features. To do so, download the software from the support section at the www.kiss-technology.com website. Then burn it on a CD-R and load it into the DVD player. See our website under support for additional information. If you do not have Internet access, or do not own or have access to a CD burner, an update can be purchased from the dealer where you purchased your DVD Player. To reset the settings of the DP-1000, press the following buttons on the remote control: "Open", "Clear", "1", "2", "3". KiSS Technology A/S reserves the right to change all settings and specifications without notice. Important safety information ·Read these instructions carefully and pay attention to all warnings and guidelines. ·Do not overload electrical sockets or extension cables. Overloading can result in fire or electric shock. ·Never insert objects into the DVD player's cabinet door. They might come into contact with dangerous voltage points or short-circuit components, which can cause fire or electric shock. ·Do not spill liquids on the DVD player. ·If the DVD Player does not function normally, or if it emits unusual sounds or odours, pull out the plug immediately and contact an authorised technician. ·Do not attempt to service the DVD player yourself. If you open or dismantle the shielding, you expose yourself to dangerous voltage and other hazards. All maintenance must be carried out by qualified service technicians. Environmental information · The system is made of recyclable materials which can be reused if disassembled by authorised personnel. · Please follow local regulations for the disposal of packaging materials, used batteries and discarded units. Copyright This product contains copyright technology which is protected pursuant to the patents that are the property of Macrovision Corporation and other copyright holders. Any use of this copyright technology must be approved by Macrovision Corporation. The technology is intended for use in the home unless otherwise approved by Macrovision Corporation. Breakdown and disassembly are prohibited. Made under license from Dolby Laboratories. "Dolby" and the double "D" symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. KiSS Instant Repair Service If the DVD player is STILL UNDER WARRANTY, KiSS Technology A/S will pay freight costs back and forth to the customer. Please follow the instructions given by the HelpDesk. Always remember to write the RMA number (provided by the HelpDesk) on the freight bill. If the DVD player is NOT UNDER WARRANTY, all costs must be held by the customer. There are three ways to obtain an RMA number. "An RMA number is a reference number generated in every single case for administrative purposes." 1.By fax or e-mail: Fax: +45 44 78 41 48 and e-mail: kiss@esupport.dk. Enclose the error description, serial no., invoice no., copy of the invoice/sales receipt. 2.Personal contact: Phone KiSS's Help Desk on +45 70 26 82 70 and request an RMA number. Advanced Functions available options on the disk. For instance, if you are watching a DVD film, the left-hand side of the screen will show information about the film's length, the number of chapters, the language options and the number of subtitles. If the DVD player is turned on, but not playing films or other media, pressing this button will take you to a menu, where you can configure your DVD player. Here you can select the default settings for language, sound, video, parental level, etc. These buttons are used for increasing and decreasing the sound volume. MARK This function not used 3.From the dealer: take the product to the dealer, where it was purchased. Important: Never send the product to be repaired without obtaining an RMA no. first, otherwise it will be rejected. The product must always be packed properly, otherwise the product warranty will be discontinued. (Packaging can be purchased from KiSS Technology at the market price). Retrieval and delivery to the end user. The product can be picked up from and delivered directly to the end user. To do so, the end user must follow the HelpDesk's instructions at the time of the RMA enquiry. If these instructions are not followed, the end user will be charged for extra costs that must be paid on delivery. Warranty certificate KiSS Technology A/S provides a twenty-four (24) month warranty from the date of purchase against material and manufacturing defects. In the event of defects covered by the warranty, the product must be returned to the dealer that sold the product, or refer to the enclosed appendix on the KiSS Instant Repair Service. The expected time of repair, including transport, is approximately five working days (except for remote areas). If any problems arise, information on our authorised service centres is available at the following address, or from the dealer who sold the product. Terms of Warranty 1.The warranty is only valid on presentation of a correctly completed warranty certificate and sales ticket, and if the serial number on the product is fully legible. 2.The obligations of KiSS Technology are limited either to repair or replacement of defective components. The repair or replacement of defective components is based on an assessment by KiSS Technology. Exchange is only possible if the repair cannot be performed. 3.Warranty repairs must be performed by an authorised KiSS Technology dealer, or an authorised service centre. No remuneration is provided for repairs performed by unauthorised workshops. Any repairs or damage to the product caused by unauthorised intervention are not covered by this warranty. 4.This product will not be viewed as defective, either in materials or in manufacture, if adaptation to national, local, technical or safety-related requirements is required in countries other than the specific country for which the product was originally designed and manufactured. 5.This warranty does not cover these types of adaptations, and no remuneration will be offered for these types of adaptations or for any consequential damages. The warranty does not cover the following: a) Periodic inspection, maintenance and repair or replacement of parts resulting from normal wear. b) Costs connected to transport, disassembly or installation of the product. c) Misuse, including use for other purposes than was intended, or faulty installation. d) Damage caused by lightning, water, fire, natural catastrophes, war, insurrection, incorrect line voltage, insufficient ventilation or other causes beyond the control of KiSS Technology. 6.This warranty applies to every legal owner of the product during the warranty period. 7. Information we must receive before repairing the product: model name, serial no, RMA no, copy of the invoice or sales receipt the dealer's name, address and phone no, personal information (Name, address, post code/city, phone no. and e-mail address (optional)), your signature, dealer's stamp and signature, date. The DVD Player supports the following media: DVD Video, DivX, XviD, ISO MPEG-4, Audio CD, MP3, Ogg Vorbis and jpeg. Language Settings The first menu is the Language settings menu. Here you select the language you wish to use for the menus, that will appear on the screen, and your preferred language when playing a DVD film ­ for subtitles, speech and menus (they will only be used if the film supports the language). AUDIO Press the (AUDIO) button to change the sound format. The audio format options, such as two-channel stereo and six-channel surround, are determined by the film producer. ZOOM When watching the film, you can zoom in on specific areas. You can zoom in either as the film is playing or after you have paused it. Activate the function by pressing the (ZOOM) button, and return to the normal picture by pressing the button again. TIP: Use the arrow buttons to move around the enlarged screen display. REPEAT As the film is playing, press the (REPEAT) button and three options will appear on the screen. MODE: Shuffle (random chapter playing) or Off (deactivated). Repeat: Lets you decide whether to repeat the section or the entire film. CLEAR Use this function to delete all previous inputs. SRCH Use (SRCH) to find a specific spot on the disk. Time: Specify time, minutes and seconds Title/Chapter: Find the title or the chapter ANGLE If the film ...