DVD Receiver KiSS DP-470 overview Discover the player in all its angles Front panel The front panel has the standard buttons listed below. When the disk tray is open, push the end of the tray to close it. 7 13 6 12 8 14 9 15 10 16 connecting Refer to the illustration below to connect speakers, subwoofer and antennas. To fit the DP-470 into your current video system, refer to the three configuration examples. Choose between one of them or make your own combination. Speakers extra accessories quick setup If your DVD Receiver is correctly connected (see the chapter on cable connections), a menu will appear when you turn on the DVD Receiver. The menu installs the most important settings for your TV set and language. Note: If this menu does not appear when you start the DVD Receiver, recheck the cable connections. Note: Try connecting your TV set using the Composite Video cables. Composite Video always produces a picture. 1 3 1 2 4 11 5 KiSS DP-470 Subwoofer extra accessory Power Cable FM Antenna AM Antenna Language Select the language that will be used whenever you open the DP-470's built-in menus. Use the arrow buttons on the remote control to move the rectangular frame to the language you wish to select and press ENTER. 2 english français 1. 2. 3. 4. 5. 6. 7. 8. On/Off CD Tray Open/Close Play/Pause Stop Previous Chapter Next Chapter Rewind 9. Fast Forward 10. Menu Congratulations on your new KiSS DP-470 The many different functions provided by your new DVD receiver will be a source of pleasure to you for many years to come. Naturally, you can play and watch DVD films with superb audio and visual quality. You can watch films in many other formats than DVD, such as MPEG-4, XviD, DivX. The audio features also give you the option of playing music CDs, MP3 or Ogg Vorbis files. The DP-470 automatically recognises each format and can read CD-RW and DVD-RW alike. Your new DP-470 also supports Picture CDs (jpg), which means that you can display your photos directly on the TV screen. This includes the pictures developed at the photo shop and any photos you have scanned and saved on a CD yourself. Note: Do not use the DVD Receiver until you have studied the quick setup menu. To do so, the DVD Receiver must be connected to a TV set. Back panel Detailed overview of the back panel 4 1 2 5 7 8 3 6 accessories Make sure the following accessories are included with your DVD Receiver. Remote Control Batteries for the Remote Control [size "AAA" (R6P)] Power Cable Audio Cable advanced setup Language Settings You can always access the Setup menu and adjust the DP-470 to your specific requirements and hardware. When the KiSS logo appears on the main screen, press the SETUP button on your remote control, and a menu will appear with the available options. The orange frame shows your position on the menu. Use the arrow buttons to move the frame and select by pressing the ENTER button. The settings on some of the menus have already been determined under Quick setup, but there are several settings available under Advanced setup as well. The first menu is the Language settings menu. Here you select the language you wish to use for the menus, that will appear on the screen, and your preferred language when playing a DVD film ­ for subtitles, speech and menus (they will only be used if the film supports the language). You can select the TV type (16:9 or 4:3 aspect ratio), video system (Pal or NTSC) and video output (Scart, S-Video, Component Video or Component Progressive (Progressive Scan)). Composite video is available in all modes except in progressive scan mode. Component Progressive delivers the best video quality, but be aware that if your TV does not support Progressive Scan the picture (and menu) will disappear. You can reset this to the factory settings by pressing: LOAD, INFO, 1, 2, 3 on the remote control. Audio Settings KiSS has tuned the product to give you the best possible sound experience (Loudness). Under acoustic setup, you can neutralize these settings or enhance them further by selecting dynamic sound. Speaker size is used to make the right bass management. When using small front speakers, try to place the subwoofer between the front speakers. Speakers level let you change the level on the speakers individually. Select the channel you want to change and use the volume buttons to adjust up and down. Miscellaneous Settings This display lets you set your preferred level of protection on the films. Some films are divided into levels, so that parents can prevent their children from seeing a specific type of film. In the next menu item, you create a password that is required for editing this setup*. The light in the DVD Receiver's display can be modified from max to normal to min or off. All settings can be reset in the "Restore settings" menu, and the Quick setup can be re-initiated from the last menu. *If you wish to modify this setup later on, you must re-enter the password. Note: Progressive scan only works on Component video output. This connection gives the best video quality. Only select Component Progressive if your TV supports it. To leave a menu, press the left arrow on the remote control. receiver Standby Button Standby will turn off the DVD receiver Source Select Buttons Turn on and select DVD, Radio, Video and TV by pressing the source buttons. Press the DVD button to start playing a medium. Pressing the Radio button will start playing radio. TV or Video should be pressed to select external inputs from TV or Video sound. Auxiliary can be selected by pressing the Video button twice. Amplifier Buttons Change the volume level by pressing the volume buttons. Press mute if instant silence is needed. The mode button is used to change between different sound modes. By default, the best available sound mode is selected for the source or media playing. It can be changed according to the table shown below. The default for CD, mp3 and radio is always stereo (centre and rear speakers are turned off). DTS: Surround, Stereo Dolby Digital: Surround, Stereo Stereo: PLII movie, Stereo, PLII music 1 79 5 8 10 6 2 3 4 5 1. 2. 3. 4. 5. 6. 7. 8. FM antenna AM antenna SCART connector Component video output Composite video output S-Video output Analog audio output TV analog input 9 10 11 12 13 14 15 16 Display The DVD Receiver is equipped with a VFD display which indicates the current ongoing activities. 1 2 KiSS DVD Player DP-470 AM Antenna 1. 2. 3. 4. Indicates the selection of the disk being played Indicates the track, chapter or program being played Indicates the status on the source or the media playing Indicates the type of media being played 234 SCART video configuration Both audio and video is connected through the SCART connector. If a Satellite receiver or set top box has digital audio output (here optical), you can connect it directly. Quick Setup VCR SAT/STB Option on the Setup Menu 11. Enter 12. Navigate Left 13. Navigate Right 14. Navigate Up 15. Navigate Down 16. Close Video 3 Select the video connection your DVD receiver is plugged with. Your options are SCART, S-Video or Component video. Composite video is always available, but the quality level is not as good as the other connections. 1 Video output must be set to SCART · 15 16 17 18 19 9 10 Advanced setup - audio 2 TV input must be set to SCART · 3 Video input must be set to optical · 4 1 TV 11 12 13 14 20 KiSS DP-470 3 TV 1 2 This screen presents two different types of TV formats: 4:3 (normal) or 16:9 (wide screen). Note: Some 4:3 TV screens can display 16:9 format. Video analog input Auxiliary analog input Subwoofer output Optical audio input Coaxial audio input Optical audio output Surround speaker centre out Surround speaker right out 17 18 19 20 Surround speaker left out Right speaker out Left speaker out AC input Speaker Type S-Video configuration 5 6 7 8 9 Video is connected through the S-Video connectors (or composite video connectors) to the TV. Audio is also connected through the TV to the DVD receiver. If a Satellite receiver or set top box has digital audio output (here coaxial), you can connect it directly VCR SAT/STB Quick Setup 1 Video output must be set to S-video · Advanced Setup - audio 2 TV input must be set to Analog · · 3 Video input must be set to coaxial 3 To get the best possible sound select the type of speakers you have connected 6 TV Audio input connection for TV 4 KiSS DP-470 3 10 2 11 12 13 1 Select the Audio Connections you have going to your TV. These screens come up as SCART as default, but you also have the choice between, Analog, Coaxial and Optical. 14 15 16 Component video configuration Audio input connection for Video 17 18 19 20 Video is connected to the monitor, and audio is connected to the DVD receiver Quick Setup 1 Video output must be set to component video · 7 Remote Select the Audio Connections you have going to your Video. These screens come up as SCART as default, but you also have the choice between, Analog, Coaxial and Optical. FM Antenna The receiver is delivered with a standard remote control. All the player's functions can be performed from it. 1. 2. 3. 4. 5. 6. 7. 8. Standby DVD Selector Radio Selector Video or Auxiliary Selector TV Selector Up Arrow Left Arrow/Rewind Play/Pause/Enter 9. Right Arrow/Fast Forward 10. Down Arrow 11. Previous Track/Chapter/ Program 12. Stop 13. Next Track/Chapter/ Program 14. Menu 15. 16. 17. 18. 19. 20. 21. 22. List Setup Info Mute Sound Mode Load/Eject Volume Volume + 21 22 Advanced Setup - audio 2 TV input must be set to analog or if digital · audio to coaxial/optical VCR SAT/STB/HDTV/PC 3 Video input must be set to analog · Audio input connection for Auxiliary Select the Audio Connections you have going to your Auxiliary. These screens come up as SCART as default, but you also have the choice between, Analog, Coaxial and Optical. 2 SCART (Provided in Europe only) S-Video (Not Provided in Europe) Composite Video Note: Certain functions will only work if supported by the media. You can always go back and start again if you happen to do something wrong, Just press on the setup button of your remote, go to miscellaneous settings and select Quick Setup 3 2 KiSS DP-470 1 Monitor/ Plasma TV playing medias DVD Menu radio support More information or assistance is available at KiSS Technology's website under End User/Support/After sales for DVD Player. Address: www.kiss-technology.com Resetting To reset the settings of the DP-470, press the following buttons on the remote control: "Open", "Clear", "1", "2", "3". KiSS Technology A/S reserves the right to change all settings and specifications without notice. Important safety information · Read these instructions carefully and pay attention to all warnings and guidelines. · Do not overload electrical sockets or extension cables. Overloading can result in fire or electric shock. · Never insert objects into the DVD player's cabinet door. They might come into contact with dangerous voltage points or short-circuit components, which can cause fire or electric shock. · Do not spill liquids on the DVD player. · If the DVD Player does not function normally, or if it emits unusual sounds or odours, pull out the plug immediately and contact an authorised technician. · Do not attempt to service the DVD player yourself. If you open or dismantle the shielding, you expose yourself to dangerous voltage and other hazards. All maintenance must be carried out by qualified service technicians. Environmental information · The system is made of recyclable materials which can be reused if disassembled by authorised personnel. · Please follow local regulations for the disposal of packaging materials, used batteries and discarded units. Copyright This product contains copyright technology which is protected pursuant to the patents that are the property of Macrovision Corporation and other copyright holders. Any use of this copyright technology must be approved by Macrovision Corporation. The technology is intended for use in the home unless otherwise approved by Macrovision Corporation. Breakdown and disassembly are prohibited. Made under license from Dolby Laboratories. "Dolby" and the double "D" symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. Warranty certificate KiSS provides a twenty-four (24) month warranty from the date of purchase against material and manufacturing defects. For defects covered by the warranty, the product must be returned to the dealer that sold the product. Terms of Warranty 1. The warranty is only valid on presentation of the original sales receipt, and if the serial number on the product is fully legible. 2. The obligations of KiSS are limited either to repair or replacement of defective components. The repair or replacement of defective components is based on ...