THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PER-FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOUR-SELF. REFER SERVICING TO QUALIFIED PERSONNEL. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. · DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATE-RIALS DO NOT OBSTRUCT THE VENTILATION VENTS. · DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. · DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. · DISPOSE OF BATTERIES IN AN ENVIRONMEN-TALLY FRIENDLY MANNER. THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. For the Middle East, South Africa and Asia THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES. For Australia, N.Z. and units with PX printed on the outer packaging THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. DANGER CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR) VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. (IEC60825-1) THE FOLLOWING APPLIES ONLY IN THE U.S.A.: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · · · · Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA: 2 The laser product label has not been attached to products for U.S.A. and Canada. Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instructions handy for future reference. Safety 1.Power source :Connect the unit to a power source of the type described in these instructions or as marked on the unit. 2.Polarization - The unit is equipped with a polarized power plug where one blade is wider than the other. This safety feature ensures that the plug fits into your household AC outlet only one way. If the plug doesn't fit one way, try reversing it. If the plug still doesn't fit, contact an electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the plug. 3.Power cord protection - Route the AC power supply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or cord with wet hands. Always grasp the plug body firmly when connecting and disconnecting it. 4.Overloading - When connecting the AC power supply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this can result in fire or electric shock. 5.Nonuse periods - Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms. 6.Attachments and accessories - Use only the attachments and accessories recommended in these operating instructions. Installation Placement 1. Ventilation - Situate the unit so that it receives proper ventilation. Do not install in a confined space such as a bookcase or cabinet. Allow at least 10 cm (4 inches) clearance from the rear of the unit. To prevent the risk of electric shock or fire due to overheating ensure curtains and other materials do not obstruct the unit's ventilation. Foreign material - Ensure objects and liquids do not get into the unit. Avoid exposing the unit to excessive smoke, dust, mechanical vibration, and shock. Magnetism - Situate the unit away from equipment and devices that generate strong magnetic fields. Stacking - Do not place heavy objects on top of this unit. Surface - Place the unit on a flat, level surface. Carts and stands - Use the unit only with carts and stands recommended by the manufacturer. Move carts with care. Sudden stops, excessive force, and uneven surfaces can cause carts to overturn. Wall and ceiling mounting - Do not mount the unit on walls or ceilings unless specified in the instructions. 2. 3. 4. 5. 6. 7. Environment 1. 2. Water and moisture - Do not use the unit near water, such as near a bathtub or swimming pool. Avoid damp basements. Heat - Situate the unit away from heat sources, such as radiators. Do not situate where temperatures fall below 5° C (41° F) or rise above 35° C (95° F). Maintenance Unplug the unit from the household AC outlet before cleaning. Clean with a damp cloth. Do not use abrasive pads, scouring powders, or solvents. Service 1. Damage requiring service-The unit should be serviced by qualified service personnel if: The AC power supply cord or the plug has been damaged; or Objects or liquids have gotten into the unit; or The unit has been exposed to rain; or The unit does not operate normally or exhibits a marked change in performance; or The unit has been dropped or the cabinet damaged. Servicing - Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. Replacement parts - When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. Safety check - After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. 2. 3. 4. To clean this unit, wipe with a soft, damp cloth. · · Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, read the instructions that came with the cloth carefully. 3 english Contents Accessories and Connections Quick Setup Advanced Setup Playing Media Advanced Functions WebRadio KiSS PC-Link Support 5 7 9 11 12 13 15 17 Congratulations on your new DVD Player The many different functions provided by your new player will be a source of pleasure to you for many years to come. Naturally, you can play and watch DVD films with superb audio and visual quality. You can watch films in many other formats than DVD, such as SVCD, MPEG-4, XviD, DivX. The audio features also give you the option of playing music CDs, MP3 or Ogg Vorbis files. The DP-500 automatically recognises each format and can read CD-RW and DVD-RW alike. Your new DP-500 also supports Picture CDs (jpg), which means that you can display your photos directly on the TV screen. This includes the pictures developed at the photo shop and any photos you have scanned and saved on a CD yourself. Note: Do not use the DVD Player until you have studied the configuration menu. To do so, the DVD Player must be connected to a TV set. 4 1 Accessories and Connections Make sure the following accessories are included with your DVD Player. DVD-Player KiSS DP-500 Batteries for the remote control [size "AAA" (R6P)] KiSS PC-Link Software CD Remote control Power Cable Scart Cable Composite Video Audio Cable Video Connection Connecting your KiSS DP-500 DVD player to your TV can be done with any of the cables below. (Only one cable can be connected at a time). 1. RGB via SCART 2. S-Video (the cable is an extra accessory) 3. Composite via SCART 4. Composite Video 5. Component SCART (the cable is an extra accessory) DP-500 13 5 4 2 TV Audio Connection Connecting your KiSS DP-500 DVD player to your amplifier can be done with any of the cables below. (Only one cable can be connected at a time). DP-500 8 6 7 Amplifier 6. Optical output (the cable is an extra accessory) 7. Coaxial output (the cable is an extra accessory) 8. Analogue Stereo 5 PC to DVD connection Below is an example of a connection for your DP-500 to a PC via an Ethernet Switch, to enable use of all its features and programmes. Extra information regarding cabling and connecting can be obtained by your local electronics´ supplier. DP-500 Ethernet Switch PC Presentation The front panel has the following standard buttons. The functions of the buttons depend on whether they are used for playing various media, or used in connection with the "Setup Menu" 79 5 13 15 4 6 8 10 11 12 14 16 1 1 3 2 1. 2. 3. 4. 5. 6. 7. On/Off CD Tray Open/Close Play/Pause Stop Previous Chapter Next Chapter 8. Rewind 9. Fast Forward 10. Menu Option on the Setup Menu 11. Enter 12. Navigate Left 13. Navigate Right 14. Navigate Up 15. Navigate Down 16. Close 2 3 6 4 5 7 7 8 9 10 8 1 23 45 6 11 14 12 15 13 16 1. 2. 3. 4. 5. 6. 7. 8. Ordinary Stereo Output Composite Video Output for TV Set S-Video Output for TV Set Coaxial Output for Amplifier Optical Output for Amplifier SCART for TV Set AC Input Ethernet 18 21 25 17 22 26 19 23 20 24 28 27 1. Standby 2. Open/Close 3. Title/Menu 4. Menu 5. Back 6. Up Arrow 7. Left Arrow 8. Enter 9. Right Arrow 10. Down Arrow 11. Rewind 12. Play/Pause 13. Fast Forward 14. Previous Chapter 15. Stop 16. Next Chapter 17. Select Lang/Audio 18. Next Picture 19. Select Subtitles 20. Select Angle 21. Zoom 22. Repeat 23. Unused 24. Setup 25. Clear Input 26. Search 27. Increase Volume 28. Decrease Volume Note: Certain functions will only work if supported by the media. 1 2 4 3 The DVD Player is equipped with a VFD display which indicates the current ongoing activities. 1. Indicates the selection of the disk being played 2. Indicates the number or chapter being shown/played 3. Indicates the current function, such as play or stop 4. Indicates the type of media being played 6 2 Quick Setup If your DVD Player is correctly connected (see the chapter on cable connections), a menu will appear when you turn on the DVD Player. The menu installs the most important settings for your TV set and language. Note: If this menu does not appear when you start the DVD Player, recheck the cable connections. Note: Try connecting your TV set using the Composite Video cables. Composite Video always produces a picture. Language Select the language that will be used whenever you open the DP-500's built-in menus. Use the arrow buttons on the remote control to move the rectangular frame to the language you wish to select and press ENTER. Connection Select your TV set's connection. Your options are SCART, S-Video and Composite. The connection depends on the inlets available on your TV set. (If you select SCART, this connection also includes RGB and Composite Video). 7 TV This screen presents two different types of TV formats: 4:3 (normal) or 16:9 (wide screen). Note: Some 4:3 TV screens can display 16:9 format. Audio If your TV set is connected via SCART, your TV is automatically provided with sound. If you would rather use an amplifier to reproduce the sound, you have two options to choose from: the phono jack or one of the two digital outputs. Note: The default Audio choice should be stereo unless your player is connected to a digital amplifier IP Address In order to use the KiSS PC-Link software, you need to provide your DVD player with your computer IP address. To easily find this number, first install the KiSS PC-Link software on your computer. Once this ...