D V D Player K iSS D P- 5 0 8 english français Congratulations on your new KiSS DP-508 The many different functions provided by your new DVD Player will be a source of pleasure to you for many years to come. Naturally, you can play and watch DVD films with superb audio and visual quality. You can watch films in many other formats than DVD, such as MPEG-4, XviD, DivX. The audio features also give you the option of playing music CDs, MP3 or Ogg Vorbis files. The DP-508 automatically recognises each format and can read CD-RW and DVD-RW alike. Your new DP-508 also supports Picture CDs (jpg), which means that you can display your photos directly on the TV screen. This includes the pictures developed at the photo shop and any photos you have scanned and saved on a CD yourself. Note: Do not use the DVD Player until you have studied the quick setup menu. To do so, the DVD Player must be connected to a TV set. accessories Make sure the following accessories are included with your DVD Player. KiSS PC-Link Software CD Remote Control Batteries for the Remote Control [size "AAA" (R6P)] Power Cable Audio Cable playing medias DVD Menu The DVD Player supports the following media: DVD Video, DivX, XviD, ISO MPEG-4, Audio CD, MP3, Ogg Vorbis and JPG. If you have adjusted your DVD Player according to the instructions above, you can now insert a DVD into your DVD Player. A moment later, the DVD menu will appear. Use the arrow buttons to navigate in the menu and start the film. Note: As this menu is part of the DVD itself, it will vary from one DVD to another. When you insert an audio CD or a disc with MP3 or Ogg Vorbis files, the player will automatically recognise the format and start playing it. You can use next/previous track or you can use the menu to navigate through the file structure, and select the song you want to hear by pressing enter. DivX, XviD and MPEG-4 The DP-508 recognises the format and automatically starts playing the CD when you insert it into the drive. Use the counter in the display to help you to see where you are in the film. You have access to the usual playback options, such as stop, pause, go to next, time search, etc. The DP-508 can show photos on your TV. The photos must be stored in JPEG format on a Disc. The player will automatically recognise the files, and start showing them as a slide show. In the menu you can navigate to find a specific photo, and start the slide show from here by pressing enter. advanced functions STEP This function is not used the players' hard disk. To do so, just view the list of items already saved, and select the one to remove. SRCH Use (SRCH) to find a specific spot on the disk. Time: Specify time, minutes and seconds Title/Chapter: Find the title or the chapter AUDIO Press the (AUDIO) button to change the sound format. The audio format options, such as twochannel stereo and six-channel surround, are determined by the film producer. A number of advanced functions are located on the lower section of the remote control. These functions are described below. Some functions may not work with all media formats. ZOOM When watching the film, you can zoom in on specific areas. You can zoom in either as the film is playing or after you have paused it. Activate the function by pressing the (ZOOM) button, and return to the normal picture by pressing the button again. TIP: Use the arrow buttons to move around the enlarged screen display. REPEAT As the film is playing, press the (REPEAT) button and three options will appear on the screen. MODE: Shuffle (random chapter playing) or Off (deactivated) Repeat: Lets you decide whether to repeat the section or the entire film. DELETE Use this function to delete any files stored on 4 23 5 1 6 8 10 7 9 11 Discover the player in all its angles Refer to the illustration below to connect your Player to any video or audio system. The PC to DVD illustration will also show you how to adapt your player to your current network settings. Front panel overview connecting Video Connection quick setup Language If your DVD Player is correctly connected (see the chapter on cable connections), a menu will appear when you turn on the DVD Player. The menu installs the most important settings for your TV set and language. Note: If this menu does not appear when you start the DVD Player, recheck the cable connections. Note: Try connecting your TV set using the Composite Video cables. Composite Video always produces a picture. The front panel has the standard buttons listed below. When the disk tray is open, push the end of the tray to close it. 7 13 9 15 Connecting your KiSS DP-508 DVD player to your TV can be done with any of the cables below. (Only one cable can be connected at a time) 1 2 3 4 5 1 2 Video 3 TV 4 Audio 5 IP Address 3 5 1 2 4 11 6 12 8 14 10 16 RGB via SCART S-Video (the cable is an extra accessory) Composite via SCART Composite Video Component SCART (the cable is an extra accessory) KiSS DP-508 TV 1 3 5 4 2 1. 2. 3. 4. 5. 6. 7. 8. On/Off CD Tray Open/Close Play/Pause Stop Previous Chapter Next Chapter Rewind 9. Fast Forward 10. Menu Option on the Setup Menu 11. Enter 12. Navigate Left 13. Navigate Right 14. Navigate Up 15. Navigate Down 16. Close Audio Connection Connecting your KiSS DP-508 DVD player to your amplifier can be done with any of the cables below. (Only one cable can be connected at a time) Select the language that will be used whenever you open the DP-508's built-in menus. Use the arrow buttons on the remote control to move the rectangular frame to the language you wish to select and press ENTER. Select the video connection your DVD Player is plugged with. Your options are SCART, S-Video or Component video. Composite video is always available, but the quality level is not as good as the other connections. This screen presents two different types of TV formats: 4:3 (normal) or 16: 9 (wide screen). Note: Some 4:3 TV screens can display 16:9 format. 1 Back panel 6 Optical output (the cable is an extra accessory) 7 Coaxial output (the cable is an extra accessory) 8 Analogue Stereo If your TV set is connected via SCART, your TV is automatically provided with sound. If you would rather use an amplifier to reproduce the sound, you have two options to choose from: the phono jack or one of the two digital outputs. Note: The default Audio choice should be stereo unless your player is connected to a digital amplifier KiSS DP-508 Amplifier Detailed overview of the back panel 8 7 6 You can always go back and start again if you happen to do something wrong, Just press on the setup button of your remote, go to miscellaneous settings and select Quick Setup. 7 PC to DVD Connection Below are four examples of connection for your DP-508 to a PC enabling use of all its features and programmes. 1. Connection to Router with Built-in Switch Connection with a Router Based Internet Connection (illustration: 1 and 2) Note: Your KiSS PC-Link software will ONLY work if the KiSS DP-508 is provided with a valid IP address. In order to use the KiSS PCLink software, you need to provide your DVD player with your computer IP address. To easily find this number, first install the KiSS PC-Link software on your computer. Once this step is completed, you will find the number under the Info Panel. Type it on the provided screen. Leave it blank if you do not want to set up your PC connection for the moment. You can always go back to the quick setup menu if you want to provide the IP address at a later stage. 8 1 2 3 4 5 6 2 3 4 5 Connection without a Router (Illustration: 3 and 4) 1. 2. 3. 4. 5. 6. 7. 8. Ordinary Stereo Output Composite Video Output for TV S-Video Output for TV Coaxial Output for Amplifier Optical Output for Amplifier SCART for TV AC Input Ethernet 6 7 8 KiSS DP-508 9 Router PC 10 Needed Equipment 1. A router, with a build-in switch or a separate switch/hub. 2. 2 or 3 straight Ethernet cables. 3. A Windows PC with an Ethernet connection. 4. The KiSS PC-link program. 11 12 13 2. Connection to Router and Switch Needed Equipment 1. Switch/hub and 2 straight cables or a cross cable. 2. A windows PC with an Ethernet connection. 3. DHCP program (ex: Magic DHCP) or a player with firmware 2.7.1 or later. 4. The PC-link program. advanced setup 14 15 16 Display KiSS DP-508 Switch The DVD Player is equipped with a VFD display which indicates the current ongoing activities. 1 2 18 17 19 20 PC 21 22 23 24 Router 4 25 26 27 28 3 3. Connection to Switch. KiSS DVD Player DP-508 1. 2. 3. 4. Indicates the selection of the disk being played Indicates the track, chapter or program being played Indicates the status on the source or the media playing Indicates the type of media being played (The DHCP Server needs to be installed on the PC) Step by Step Guide 1. Connect both the PC and the player to the router or switch/hub with straight cables 2. Connect the router to the switch/hub via the uplink connection. 3. Install the PC-link program on the PC 4. Check which IP address is given to the PC in the PC-link program under info 5. Insert this IP in the DP-508 and try to connect to the PC­link program Now the DP-508 should be connected KiSS DP-508 Remote The Player is delivered with a standard remote control. All the player's functions can be performed from it. 1. 2. 3. 4. 5. 6. 7. 8. Standby Open Close Title/Menu Menu Return Up Arrow Left Arrow Enter 9. 10. 11. 12. 13. 14. 15. 16. Right Arrow Down Arrow Rewind Play/Pause Fast Forward Previous Chapter Stop Next Chapter 17. 18. 19. 20. 21 22 23 24 Select lang/Audio Next Picture Select Subtitle Select Angle Zoom Repeat Unused Setup 25 26 27. 28. Delete Search Volume + Volume - SCART (Provided in Europe only) S-Video (Not Provided in Europe) Composite Video Note: Certain functions will only work if supported by the media. Possible errors. · Cable problem, check that there is light in all the ports in the switch/hub · There is installed a firewall on the PC, that blocks the ports that the PC-link program uses (port 8000 must be open) 4. Straight Connection with Cross-Over Cable. (The DHCP Server needs to be installed on the PC) · The player and the PC are not on the same subnet (problem with playing video) · Your PC has been assigned a new IP address KiSS DP-508 from the DHCP server, which differs form the PC one enter in the player. (Solution use a static IP on the PC) Cross-Over Cable Switch PC Step by Step Guide. 1. Connect the player either straight to the PC with the cross cable or through the switch with the straight cables. 2. Install the DHCP program, configure the program to have and IP range and reboot the computer. 3. Install the PC-link program and make sure that the computer's IP are in the IP-range configured in the DHCP program. 4. Turn on the DP-508 and check in the DHCP program under leases that the player receives an IP 5. Try to connect the player to the PC-link program and stream audio, video or pictures If you have configured the DHCP program correctly then the player should be able to connect to the PC. You can always access the Setup menu and adjust the DP-508 to your specific requirements and hardware. Select "Setup" from the main screen or press the SETUP button on your remote control, and a menu will appear with the available options. The orange frame shows your position on the menu. Use the arrow buttons to move the frame and select by pressing the ENTER button. The settings on some of the menus have already been determined under Quick setup, but there are several settings available under Advanced setup as well. Language Settings Video Settings The first menu is the Language settings menu. Here you select the language you wish to use for the menus, that will appear on the screen, and your preferred language when playing a DVD film ­ for subtitles, speech and menus (they will only be used if the film supports the language). You can select the TV type (16:9 or 4:3 aspect ratio), video system (Pal or NTSC) and video output (Scart, S-Video, Component Video or Component Progressive (Progressive Scan)). Composite video is available in all modes except in progressive scan mode. Component Progressive delivers the best video quality, but be aware that if your TV does not support Progressive Scan the picture (and menu) will disappear. You can reset this to the factory settings by pressing: LOAD, INFO, 1, 2, 3 on the remote control. Miscellaneous Settings Audio Settings Possible errors. · Cable problem, check that there is light in all the ports in the switch/hub · There is installed a firewall on the PC, that blocks the ports that the PC-link program uses (port 8000 must be open) KiSS has tuned the product to give you the best possible sound experience (Loudness). Under acoustic setup, you can neutralize these settings or enhance them further by selecting dynamic sound. Speaker size is used to ...