KiSS DP-558 Digital Video Recorder Online Electronic Program Guide, Remote EPG, TimeShift, Network, Online Services, Hard Disk, DVD/DivX/Nero Digital Player www.kiss-technology.com italiano español nederlands dansk deutsch français english english Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 What's in the box Overview How to connect my player PC to DVD connection Quick setup Television function Advanced setup Video Recorder Functions Hard Disk and FTP Playing Media KiSS PC-Link KiSS Online KiSS Remote EPG Advanced Functions Updating the player Support Contacting KiSS General Public License GNU 7 8 9 10 12 13 14 16 18 19 20 21 24 26 27 28 29 174 Congratulations on your KiSS DP-558 To enjoy all the new features of your new player, always make sure it has the latest firmware installed. By updating your player, new features not described in this manual can be added and some features described in this manual can be altered or removed. The number of the current firmware can be obtained by pressing the setup button on the remote. It is located on the top left corner of the screen. The latest firmware is available from our website: www. kiss-technology.com/software. Refer to the "Updating the player" section of this manual or the website's online guide for in-depth guidance. THE LATEST VERSION OF THIS MANUAL IS AVAILABLE FROM WWW.KISSTECHNOLOGY.COM IN THE SUPPORT SECTION AT THE FOLLOWING ADDRESS: WWW.KISS-TECHNOLOGY.COM/MANUALS 1 What's in the box The following elements are included in the box. KiSS DP-558 KiSS PC-Link Software CD Batteries for the remote Remote Control Power cable Composite Video Antenna Cable SCART Cable Provided in Europe only S-Video Not provided in Europe Audio cable 7 2 Front panel 1 2 3 4 5 6 7 8 9 On/Off CD Tray Open/Close Play/Pause Stop Previous Chapter Next Chapter Rewind Fast Forward Overview 3 5 7 13 9 15 10 Menu Option on the Setup Menu 11 Enter 12 Navigate Left 13 Navigate Right 14 Navigate Up 15 Navigate Down 16 Close 1 2 4 11 6 12 8 14 10 16 Back panel 1 2 3 4 5 6 7 8 Ethernet TV Antenna in/out SCART in/out Video Output S-Video Output Component Video Output Analog Audio Output Coaxial Audio Output 9 10 11 12 13 14 Optical Audio Output Video Input S-Video Input Component Video Input Analog Audio Input AC Input 3 4 2 9 1 5 11 6 7 8 10 12 13 14 Display 1 2 4 3 1 2 3 4 Indicates the selection of the disc being played Indicates the number or chapter being shown/played Indicates the current function, such as play or stop Indicates the type of media being played Remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Standby Open/Close Record Delete Back Up Arrow Left Arrow Play/Pause/Enter Right Arrow Down Arrow Previous Chapter Stop Next Chapter Menu 15 16 17 18 19 20 21 22 23 24 25 26 27 28 List Setup Mark Audio Title Menu Subtitle Input TV HDD Online Zoom Decrease Volume Increase Volume Store 1 2 3 6 4 5 9 7 11 14 8 10 12 15 13 16 17 21 25 18 22 26 19 23 27 20 24 28 8 3 How to connect my player We recommend connecting your player to your television using the SCART cable that comes with your player. The SCART cable is the biggest cable with the large connectors in the ends. Connect one end of the SCART cable to "SCART OUT" on your player. Connect the other end to the SCART input on your television. Then connect the antenna cable coming from your roof or the wall with "TV IN" on the player. Connect "TV OUT" with the antenna input on your television using the provided cable. Connect the power cable to the power connector. If your television does not have a SCART connector, you will have to connect both audio and video with separate cables. For connecting video, you have the following options: · VIDEO (composite video) · S-VIDEO (or "super-VHS", provides a better quality than VIDEO) · COMPONENT VIDEO (provides an even better quality than the above) After connecting the video, you will have to connect the audio. You can connect the audio to either the television or your HiFi set. The DP-558 outputs both analog and digital audio. Analog audio is the most common format, and is supported by most devices. Digital audio is more common on high-end equipment and surround amplifiers. For connecting the audio, you have the following options: · Connect ANALOG AUDIO OUT to your television using phono (RCA) jacks · Connect ANALOG AUDIO OUT to your HiFi stereo using phono (RCA) jacks · Connect COAXIAL or OPTICAL digital audio to your HiFi stereo Video connection Connecting your KiSS DP-558 DVD player to your TV can be done using any of the cables below. (Only one cable can be connected at a time) 1 2 3 4 5 RGB via SCART S-Video (the cable is an extra accessory) Composite via SCART Composite Video Component SCART (the cable is an extra accessory) KiSS DP-558 1 3 5 4 2 TV Audio connection Connecting your KiSS DP-558 DVD player to your amplifier can be done using any of the cables below. (Only one cable can be connected at a time) 1 Analog Stereo 2 Coaxial Output (the cable is an extra accessory) 3 Optical Output (the cable is an extra accessory) KiSS DP-558 1 2 3 Amplifier Antenna connection Connecting your KiSS DP-558 DVD player to your TV Antenna 1 Antenna In (Going to the roof Antenna) 2 Antenna Out (Going to the player, use provided cable) 1 KiSS DP-558 2 TV - Extra information is also available from www.kiss-technology.com 9 4 Connection using a router Internet PC to DVD connection Internet KiSS DP-558 PC Switch Router PC KiSS DP-558 Router Equipment required · A router, with a built-in switch or a separate switch/hub. · 2 or 3 straight Ethernet cables. · A Windows PC with an Ethernet connection. · The KiSS PC-link program. Step-by-Step Guide 1 Connect the player to the router's built-in switch or an external switch/hub which is connected to the router. 2 Connect the PC to the router's built-in switch or an external switch which is connected to the router. 3 Check that your Internet connection is working. If any problems occur, contact your ISP (Internet Service provider). 4 Install KiSS PC-Link on the PC and select the content to be shared with your player. 5 Start the player, select SETUP and then select ETHERNET - TCP/IP. Check that DHCP Client is ENABLED. Press SETUP to exit this menu. 6 Press MENU and go to PC-LINK. 7 Press SEARCH FOR PC-LINK HOST, the name of the server should appear on your screen, press ENTER to select it. 8 Choose between Audio, Video or Picture. The player will display the list of files available from your PC. 9 If you have any problems please check the FAQ on our web site for any questions If that doesn't help then contact the KiSS Hotline Your player should now be connected Network with a PC using Internet connection sharing Internet KiSS DP-558 Switch PC KiSS DP-558 Internet PC Crossed cable Equipment required · Switch/hub and 2 straight cables or a crossed cable. · A windows PC with an Ethernet connection. · The KiSS PC-link program. Step-by-Step Guide 1 Connect the player to the PC with a crossed cable or to a switch/hub connected to the PC. 2 Connect the PC to the Internet (LAN/Modem/ADSL). 3 Check that your Internet connection is working. If any problems occur, contact your ISP (Internet Service provider) 4 On the PC select Network Connection in the Control Panel. Open Properties for the network connection that is connected to the Internet. 5 Select Advanced where you enable Internet connection sharing. 6 Install KiSS PC-Link on the PC and select the content to be shared with your player. 7 Start the player, select SETUP and then select ETHERNET - TCP/IP. Check that DHCP Client is ENABLED. Press SETUP to exit this menu. 8 Press MENU and go to PC-LINK. 9 Press SEARCH FOR PC-LINK HOST, the name of the server should appear on your screen, press ENTER to select it. 10 Choose between Audio, Video or Picture. The player will display the list of files available from your PC. 11 If you have any problems, please check the FAQ on our web site for any questions. And if that doesn't help then contact the KiSS Hotline Your player should now be connected 10 Network using a direct Internet connection Internet Internet KiSS DP-558 Switch PC KiSS DP-558 Crossed cable Equipment required · Switch/hub and 2 straight cables or a crossed cable. · A windows PC with an Ethernet connection. · The KiSS PC-link program. Step-by-Step Guide 1 With a direct Internet connection, you can only access the online features such as WebRadio. KiSS PC-Link can NOT be enabled. 2 Start the player, select SETUP and then select ETHERNET - TCP/IP, check that DHCP Client is ENABLED. 3 Press SETUP to exit this menu. 4 Press ONLINE on your remote to select the service you wish to use. 5 If you have any problems please check the FAQ on our web site for any questions, and if that doesn't help then contact the KiSS Hotline. Your player should now be connected Network using a direct connection to the PC KiSS DP-558 Switch PC KiSS DP-558 PC Crossed cable Equipment required · Switch/hub and 2 straight cables or a crossed cable. · A windows PC with an Ethernet connection. · The KiSS PC-link program. Step-by-Step Guide 1 Connect the player to the PC with a crossed cable or to a switch connected to the PC. 2 On the PC select Network Connection in the Control Panel. Open Properties for the network connection that is connected to the Player. 3 Select Properties for the Internet Protocol (TCP/IP). 4 Select "Use the following IP address" and enter the IP address below: IP address 192.168.0.1 Subnet mask 255.255.255.0 5 Select SETUP on the player, then ETHERNET - TCP/IP and set the DHCP client to DISABLED 6 Select "ENTER THE TCP/IP SETTINGS MANUALLY" 7 Then enter the following addresses: IP ADDRESS: 192.168.000.002 NETWORK MASK: 255.255.255.000 DEFAULT GATEWAY: 192.168.000.001 DNS SERVER: 192.168.000.001 8 Press SETUP to exit this menu Then MENU and go to PC-LINK. 9 Press SEARCH FOR PC-LINK HOST, the name of the server should appear on your screen, press ENTER to select it. 10 Choose between Audio, Video or Picture. The player will display the list of files available from your PC. 11 If you have any problems, please check the FAQ on our web site for any questions. If that doesn't help then contact the KiSS Hotline. Your player should now be connected. Possible errors. - Cable problem, check that there is light in all the ports of the switch/hub - There is a firewall installed on the PC which blocks the ports used by KiSS PC-link (port 8000 must be open) - The player and the PC are not on the same Subnet (problem with playing video) - Your PC has been assigned a new IP address from the DHCP server. It may differ from the one entered in the player. (Using a static IP on the PC will counter this) - KiSS PC-Link has to be running for the player to access the data 11 5 1. Select Language Select your preferred language Quick setup If your DVD Player is correctly connected, the language selection menu will appear. Quick Set-Up Select Language English Deutsch Français Dansk Svenska Norsk Suomi Español Italiano Nederlands Please select your preferred language Mon 01 Nov 2004 12:00 2. Select Region From a list, choose the part of the world you live in. Then select your country. Quick Set-Up Select Region Northern Europe Western Europe Southern Europe Eastern Europe Middle East Central Asia Southern Asia Oceania North America Central America and Caribbean Please select your region Mon 01 Nov 2004 12:00 3. Video Setup Specify how your DVD Player is connected to your TV or monitor. Quick Set-Up Video Setup Mon 01 Nov 2004 12:00 Composite S-Video RGB SCART How is your player connected to your display? Component SCART 4. Display Format Select between standard TV type (4:3) or wide screen TV type (16:9). Quick Set-Up Display Format Mon 01 Nov 2004 12:00 16:9 (widescreen) 4:3 (conventional) What is the format of your TV screen? - If this menu does not appear when you start the DVD Player, re-check the cable connections. - You can always go back and start again if you happen to do something wrong, Just press on the SETUP button of your remote, go to MISC. SETTINGS and select QUICK SETUP. 12 5. Audio Setup Select which audio output is used on your DVD Player. The default Audio selection should be stereo unless your player is connected to a digital amplifier. Quick Set-Up Audio Setup Mon 01 Nov 2004 12:00 Analogue/PCM Stereo Digital Surround Please select your audio configuration. 6. Format Hard Disk You will be asked to format (erase) your Hard Disc. KiSS advise you to do this the first time you connect your player. Remember that formatting the Hard Disk will delete all content held on it. Formatting takes a few minutes, when it is finished, press DONE. Quick Set-Up Format Hard Disk The hard disk will now be formatted and prepared for use. This will take approximately 2-3 minutes. Format Hard Disk Caution: You are about to permanently erase your hard disk ...