Three-Way Horn-Loaded Loudspeaker Cornwall III Initially introduced in 1959, the Cornwall speaker was designed to serve as a larger, full-range alternative to the Heresy when used as a center channel speaker between two widely spaced Klipschorns. When it was discontinued in 1990, there was an outcry from consumers resulting in a letter-writing campaign and even a petition to bring back this storied loudspeaker. This famed speaker, now dubbed the Cornwall III, is back and better than ever. A three-way design using horn-loaded compression drivers for the midrange and treble and a direct-radiating 15-inch woofer for the low frequencies, the Cornwall delivers the full-range bass response of the Klipschorn® with sensitivity and output approaching the fully horn-loaded models. SPECIFICATIONS FREQUENCY RESPONSE SENSITIVITY POWER HANDLING MAXIMUM SPL NOMINAL IMPEDANCE ENCLOSURE TYPE CROSSOVER FREQUENCY TWEETER 34Hz-20kHz ± 3dB 102dB @ 1 Watt/1 meter 100 Watts max continuous (400W peak) 119dB 8 ohms Bass reflex via front-mounted slot ports HF: 5000Hz MF: 800Hz K-107-TI 1" (2.54cm) Titanium diaphragm compression driver Tractrix® K-53-TI 1.75" (4.45cm) Titanium diaphragm compression driver Exponential K-33-K 15" (38.1cm) Fiber-composite cone 35.75" (90.81cm) H x 25.313" (64.29cm) W x 15.5" (39.37cm) D 98 lbs. (44.5kg) MDF Walnut Lacquer, Cherry Lacquer, Black Lacquer HIGH FREQUENCY HORN MIDRANGE MID-FREQUENCY HORN WOOFER DIMENSIONS WEIGHT ENCLOSURE MATERIAL FINISHES www.klipsch.com 1-800-KLIPSCH All specifications are subject to change without notice. ©2006 ...