User manual KLIPSCH RW-5101-C - BROCHURE

In-Ceiling Subwoofer RW-5101-C · Superb bass response, output and extension · High sensitivity design The RW-5101-C proves that domestic harmony and powerful home theater performance can co-exist. In other words, just because you can't see this in-ceiling subwoofer, doesn't mean you won't feel it. This hard-hitter generates clean, potent bass that'll lift you out of your seat. It also continues the Klipsch tradition of high output with low distortion and effortless dynamic range. The RW-5101-C utilizes a 10-inch longthrow woofer for unbeatable music and movie playback and high power handling (250 watts). The driver features a stiff, well-damped Cerametallic cone, a specially treated aluminum that has been electrochemically transformed into ceramic on both outer surfaces. This ceramic compound allows the woofer to move at high speeds without blurring the sound. Furthermore, the subwoofer features an MDF baffle and sealed back enclosure, allowing it to deliver consistent low-frequency response regardless of the ceiling space. Easy-to-install, the RW-5101-C can accommodate new or existing ceiling structures, as the enclosure is designed to fit standard ceiling joists. It employs all-new sure-grip mounting dogs for even pressure against the drywall. These robust dogs pull tight, leaving no gaps in sight and providing long-term installation reliability. Timbre and style matched to all of our other premium in-ceiling products, the RW-5101-C brings a great bottom-end to a wide variety of discreet stereo or home theater systems. In fact, we've got premium architectural solutions in all shapes, sizes and prices, so take your pick! *The RW-5101-C must be used in conjunction with the company's RSA-500 subwoofer amplifier, sold separately. Two of these subwoofers can be connected to a single amplifier. · 10-inch Cerametallic woofer · Sealed back enclosure · Maximum installation reliability · Mix and match with all our in-ceiling products SpecificationS Frequency Response Sensitivity Nominal Impedance Amplifier Power Woofer 35-120Hz ± 4dB 91dB @ 1watt/ 1 meter 8 ohms See RSA-500 specifications Single 10" (25.4cm) front firing, CerametallicTM cone, stamped steel frame driver Use only with RSA-500 -EQ #3 MDF baffle, ABS shell Sealed Enclosure 15.3" (38.7 cm) Max Flange Diameter N/A 9.5" (24.1 cm) 13.3" (33.7 cm) Diameter 13 lbs. (6 kg) White 2008 Amplifier Enclosure Material Enclosure Type Height Width Depth Cutout Dimensions Weight Finishes Built From www.klipsch.com 1-800-KLIPSCH All specifications are subject to change without notice. ©2008