8900 Keystone Crossing, Suite 1220 Indianapolis, Indiana 46240 1. 800 . KLIPSCH · www.klipsch.com Make sure you return your warranty card so that we may keep you up-to-date on new Klipsch products and promotions. As always, if you have any questions, contact your local authorized Klipsch dealer. For your records: Model Serial Number Date Purchased Dealer Name 193110 15M1199 SP-1, SF-2, SF-1, SB-3, SB-2, SC-1, & SS-1 LOUDSPEAKERS Owner's Manual & Warranty CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! ! ! CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user-serviceable parts inside. Refer repairs to a Klipsch authorized service center. AVIS: Risque de choc electricque, ne pas ouvrir. CAUTION! The international symbol of a lightning bolt inside a triangle is intended to caution you to uninsulated "dangerous voltage" within the device's enclosure. The international symbol of an exclamation point inside a triangle is intended to alert you to the presence of important operating, maintenance and servicing information in the manual accompanying the device. CAUTION! To prevent electrical shock, match the wide blade of the plug on the power cord to the wide slot on the power outlet and insert fully. ATTENTION: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture. 1. Read Instructions. All safety and operating instructions should be read before operating the device. 2. Retain Instructions. The safety and operating instructions should be retained for future reference. 3. Heed Warnings. All warnings on the device and in the operating instructions should be adhered to. 4. Follow Instructions. All operating and safety instructions should be followed. 5. Water and Moisture. The device should never be used in, on or near water due to risk of fatal shock. 6. Carts and Stands. The device should only be used on carts or stands recommended by the manufacturer. 7. Wall and Ceiling Mounting. The device should be mounted on a wall or ceiling only as recommended by the manufacturer. 8. Ventilation. The device should always be located in such a way that it maintains proper ventilation. It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink or ventilation openings. 9. Heat. Never locate the device near heat sources such as a radiator, floor register, stove or other heat generating device. 10. Power Supply. The device should only be connected to a power supply of the type described in the operating instructions or as marked on the device. 11. Polarization. This product is equipped with a polarized line plug that has one blade wider than the other. To prevent electrical shock, match the wide blade of the plug with the wide blade slot of the receptacle and insert fully. 12. Power Cord Protection. Power cables should be routed so they are unlikely to be stepped on or crushed by items placed on or against them. Pay special attention to where the plug enters a socket or fused strip and to where the cord enters the device. 13. Cleaning. The device should be cleaned in accordance with the manufacturer's instructions. 14. Periods of Non-Use. The device should be unplugged from the wall outlet when it is not in use for extended periods. ! ! SS-1 Wall Mount Hole Marking Template 4 9/16" Cut along dotted line and mail. IF YOU PREFER, YOU CAN REGISTER ONLINE AT WWW.KLIPSCH.COM For multiple speaker purchases, please fill out only one warranty card. Name: Street Address: City/State/Zip: Home Phone: Work Phone: E-mail Address: Would you like to receive the latest product updates and news via e-mail? q Yes q No Product Purchase Model and serial number must be included to honor your warranty card. For multiple speaker purchases, please fill out only one warranty card. Model Model Model Model Model Model Serial Number Serial Number Serial Number Serial Number Serial Number Serial Number What store did you purchase your Klipsch products from? Store Name: How did you hear about Klipsch? State: q Audio/Home Theater Magazine q Other Magazine q TV q Radio q Newspaper q Trade Show q Friend q Retail Dealer q Direct Mail Have you purchased Klipsch products before? q Yes q No If yes, what products? Product Name(s): q 6 mos. ­ 1 yr. q 1­2 yrs. How likely are you to consider Klipsch products for your upcoming purchases? q Very likely q Somewhat likely q Doubtful If doubtful, why? q Don't carry product I'm looking for q Too expensive q Klipsch dealer too far away q Other When do you hope to purchase additional loudspeakers? Please tell us about you! q Married q Single q Student q Male q Female Age: q 15-17 q 18-24 q 25-35 q 36-45 q 46-55 q 55-64 q 65+ Annual Household Income: q Under $25,000 q $25-35,000 q $35-50,000 q $75-100,000 q $100,000+ Klipsch Limited Warranty KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). For a period of five (5) years from the date of purchase, KLIPSCH will repair or replace (at KLIPSCH's option) this product or any defective parts (excluding electronics and amplifiers) in this product. For products that have electronics or amplifiers, the warranty on those parts is for a period of two (2) years from the date of purchase. To obtain warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. If your dealer is not equipped to perform the repair of your KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions. You will need to ship this product in either its original packaging or packaging affording an equal degree of protection. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the warranty period, must be presented to obtain warranty service. This Warranty is invalid if (a) the factory applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call 1-800KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a KLIPSCH authorized dealer. This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not cover products sold AS IS or WITH ALL FAULTS. REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE. Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from state to state. 15. Dangerous Entry. Care should be taken that no foreign objects or liquids fall or are spilled inside the device. 16. Damage Requiring Service. The device should be serviced by a Klipsch authorized service center when: -The plug or power supply cord has been damaged. -Objects have fallen or liquid spilled inside of the device. -The device has been exposed to moisture. -The device does not appear to be operating properly or exhibits a marked change in performance. -The device has been dropped or the cabinet has been damaged. 17. Service. The user should not attempt to service the device beyond what is described in the operating instructions. All other servicing should be referred to qualified personnel. If dealer service is not available, contact Klipsch customer service for a return authorization (RA) number before shipping. Klipsch Customer Service: 800-554-7724 All return shipments should be made to: Klipsch, L.L.C. 137 County Road #278 Hope, AR 71801 RA#...(return authorization number required) Dear Klipsch Synergy Series Owner: Congratulations on your purchase of Klipsch Synergy Series loudspeakers! These products represent the best new thinking, coupled with the Klipsch tradition of sonic excellence. The Synergy Series was developed using the latest in materials and technology to deliver extraordinary sound from today's digital sources. Designed as a family, the Klipsch Synergy Series was developed to provide optimal performance in either a home theater or music system. For home theater use Klipsch engineers have developed voice matched center and rear surround speakers to complement the main channel speakers. All Synergy models offer the accuracy, dramatic imaging and high sensitivity that characterize the "live" Klipsch sound. By utilizing our new Tractrix® Horn technology, the Synergy models offer the type of high quality performance normally found only in professional speakers, ensuring you a truly enjoyable listening experience. If this is your first Klipsch purchase, welcome to the fold; if this is an additional Klipsch purchase, we thank you for your loyalty. When it comes to the best in home entertainment, Klipsch is a sound choice. Please take the time to fill out the enclosed warranty registration card or, if you prefer, you can register your products online at www.klipsch.com. This information helps us serve you better and assists our dealers in meeting your needs as a valued Klipsch customer. Should you have any questions or need more information on Synergy or other Klipsch products, please contact us. We will be happy to assist you, and welcome your feedback. Thank you for choosing Klipsch loudspeakers. Sincerely, Fred S. Klipsch Chairman & CEO We Want Your Klipsch Product to Look and Sound as Good as When it Left the Factory. Please Check Promptly for Transit Damage. Each Klipsch product is individually tested for sonic quality and inspected for superior appearance before it leaves the Hope, Arkansas factory. Your loudspeaker left the factory in perfect condition in packaging carefully engineered to protect both the working parts and finish. However, in certain extreme circumstances, the products may be damaged in transit. To ensure that your loudspeaker is in its original condition, please inspect it immediately. If damage is discovered, notify the authorized Klipsch dealer that the unit was purchased from or the transportation company responsible for safe delivery. In the latter case, make a request for inspection from the transportation company and hold the product in its original shipping carton for the inspector. After a joint inspection report is made, file a claim with the transportation company. Component Specifications SB-2 Sensitivity: 93dB @ 1 watt / 1 meter Bandwidth: 54Hz­20kHz±3dB Nominal Impedance: 8 ohms Crossover Frequency: 2400Hz Power Handling: 85 watts maximum continuous (340 watts peak) Enclosure Type: Bass reflex via wide flare, rear-firing por t Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compression driver with a 90° x 60° Tractrix Horn and one 6.5" (16.51cm) K-1092-SB magnetically shielded woofer featuring a polymer housing and IMG cone Net Weight: 13 lbs. (5.9kg) Height: 15" (38.1cm) Width: 7.3" (18.5cm) Depth: 9.75" (24.7cm) Cabinet: Medium density fiber board construction (MDF) Finish: Woodgrain vinyl veneer SB-3 Sensitivity: 94dB @ 1 watt / 1 meter Bandwidth: 52Hz­20kHz±3dB Nominal Impedance: 8 ohms Crossover Frequency: 2700Hz Power Handling: 100 watts maximum continuous (400 watts peak) Enclosure Type: Bass reflex via wide flare, rear-firing port Drive Components: Two-way system using one 1" (2.54cm) K-101-S neodymium magnet, aluminum dome compression driver with a 90° x 60° Tractrix Horn and one 8" (20.3cm) K-1093-SB magnetically shielded woofer featuring a polymer housing and IMG cone Net Weight: 18 lbs. (8.18kg) Height: 17" (43.18cm) Width: 8.69" (22.06cm) Depth: 11.25" (28.57cm) Cabinet: Medium density fiber board construction (MDF) Finish: Woodgrain vinyl veneer SF-1 Sensitivity: 94dB @ 1 watt / 1 meter Bandwidth: 40Hz­20kHz±3dB Nominal Impedance: 8 ohms Crossover Frequency: 2kHz Power Handling: 100 watts maximum continuous (400 watts peak) Enclosure Type: Bass reflex ...