User manual KOBIAN CYPERPIX E560M

Cover User Manual This manual can guide you to use this camera with proper operation and correct setting. Please read it carefully and optimize the performance in accordance with your preference. Table Of Contents Safety Notes ........................................................................ 04 Overall Introduction .......................................................... 05 Accessories ..........................................................................................05 External View .....................................................................................06 Mode Dial (Working Mode) ...............................................................07 Focus Range........................................................................................07 Icon Display ........................................................................................08 Icon Index Table .................................................................................09 Table Of Contents Formatting the Built-in Flash Memory ............................................................. 25 Setting Slide Show ........................................................................................... 25 Setting Image Protection................................................................................... 26 Printing Out Images without a PC .................................................................... 27 Under Movie Clip Mode ( ) ................................................................28 Setting the Recording Time of a Movie Clip .................................................... 28 Under Setup Mode ( ) ........................................................................29 Setting Beep Sound .......................................................................................... 29 Setting Auto Power Off .................................................................................. 29 Setting Date Stamp ........................................................................................... 30 Setting Date Type ............................................................................................. 30 Setting Date ...................................................................................................... 31 Setting Quick View........................................................................................... 31 Setting Language .............................................................................................. 32 Default Setting.................................................................................................. 32 Getting Ready ..................................................................... 10 Switch On or Off the Camera ............................................................10 Loading the Batteries .......................................................................10 Using an AC Adapter.......................................................................... 11 Inserting an SD Card ......................................................................... 11 Removing an SD Card........................................................................12 Attaching the Wrist Strap ..................................................................12 PC Connectiony .................................................................. 33 Installing the Camera"s Driver ...........................................................33 Under Microsoft Windows 98/98SE ................................................................. 33 Uunder Microsoft Windows 2000..................................................................... 35 Uunder Microsoft Windows ME/XP................................................................. 37 Uunder Mac 9.X or later................................................................................... 37 Getting Started ................................................................. 13 Basic Photography..............................................................................13 Advanced Functionality Settings ....................................... 14 Under Shooting Mode ( ) ...............................................................14 Setting Focus Range .........................................................................................14 Turning On or Off the TFT LCD Monitor.........................................................14 Setting Flash Mode .........................................................................................14 Setting Self-timer ............................................................................................15 Setting Digital Zoom ......................................................................................16 Setting an Image Size (Resolution) .................................................................16 Setting Image Quality .....................................................................................17 Setting Voice Memo ........................................................................................18 Setting Exposure...............................................................................................19 Setting White Balance ......................................................................................20 Installing Ulead Photo Explorer ........................................................38 Under Windows Operation System (Windows 98/98SE/2000/ME/XP) ............ 38 Under Windows Operating System (Mac 9.X or later) ..................................... 42 About Ulead Photo Explorer .............................................................44 Downloading the Image(s) ...................................................................52 Under Windows Operation System (Windows 98/98SE/2000/ME/XP) ............ 52 Downloading Images from Removable Disk ................................................ 52 Downloading Imagesf through Ulead Photo Explorer .................................. 52 Under Macintosh Operation System (Mac 9.X or later).................................... 53 Downloading Images from Removable Disk ................................................ 53 Downloading Imagesf through Ulead Photo Explorer .................................. 53 Under Playback Mode ( ) ...............................................................21 Exploring and Image.........................................................................................21 Displaying Image Information ..........................................................................22 Playback of a Movie Clip ...............................................................................22 Thmbnail Images (Small Images) Display ......................................................23 Deleting Images ..............................................................................................24 Formatting an SD Card ...................................................................................24 2 Appendix ............................................................................. 54 Error Message Table ..........................................................................54 Specifications .....................................................................................54 3 Safty Notes Do not try to open the camera by yourself which may cause damage to the camera or electric shock. Do not fire the flash in a close distance (less than 1 meter) to human eyes. Keep the camera away from the reach of children or animals to prevent them from swallowing the batteries or small accessories. Avoid using the camera if any form of liquid enters the camera. If it happens, switch off the camera and contact the company that you bought this camera from for help. Do not operate this camera with wet hands which may cause electric shock. Do not place or store the camera in a high temperature environment which may cause damage to the camera. Do not mix to use different types of batteries or new and old batteries. Take out the batteries to avoid electricity leakage which may damage the camera when the camera is not in use for a long period. Unplug the camera from the adapter (if used) to avoid damage to the camera if the camera is not to be used in a long period. It's normal that the temperature of the camera body rises after using for a long period. Overall Introduction Accessories Digital Camera Camera Driver & Ulead Software 2 x AA Batteries Camera Pouch User Manual Quick Start Guide USB Cable Wrist Strap SD Card (Optional) 4 5 Overall Introduction External View To p Shutter Button Overall Introduction Back LED Indicator MIC TFT LCD Monitor View Finder Power Switch Menu Button Strap Eyelet Up () Direction Button Down () Direction Button Left () Direction Button Right () Direction Button F ro n t TFT LCD Button Self-timer LED Focus Switch USB Connector DC In Connector Mode Dial(Working Mode) Shooting Mode ( ) Playback Mode ( ) Movie Clip Mode ( ) Setup Mode ( ) Focus Range Lens Cover Lens Cover Switch Macro ( ) : 0.2m Normal ( ) : 0.8m~infinity Button Battery/Memory Card Cover 6 Tripod Socket 7 Overall Introduction Icon Display Battery Status ( ) Battery full ( ) Battery half drained ( ) Battery drained Focus Range ( ) Macro Digital Zoom Working Mode ( ) Shooting mode ( ) Playback mode ( ) Movie clip mode ( ) Setup mode Voice Memo Flash Mode ( ) Auto flash ( ) Auto flash with red-eye reduction ( ) Night Scene ( ) Fill-in flash ( ) Flash off Overall Introduction Icon Index Table Working Mode Focus Range Flash Modes Digital Zoom Thumbnails White Balance ( ) Auto ( ) Daylight ( ) Sunset ( ) Fluorescent ( ) Tungsten Self-timer Movie Clip Memory Card Inside Battery Status Image Size (Resolution) Image Quality Image Quality ( ) Super fine ( ) Fine ( ) Normal White Balance Exposure Voice Memo Protected Image Print (DPOF) Darkness Warning Exposure Memory Card Date Image Quality ( ) 2560x1920 ( ) 2048x1536 ( ) 1600x1200 ( ) 1280x960 8 9 Getting Ready Switch On or Off the Camera Slide the "POWER" switch sideways and hold it awhile to switch on the camera. Repeat the action above to switch off the camera. Getting Ready Note Batteries may lose power if kept inside the camera for a long time without using. Please remove the batteries while the camera is not in use. Do not use manganese batteries since they cannot supply sufficient power to support the camera's operation. Batteries may not work normally under 0¢J. It's normal that the temperature of the camera body goes up after being in use for a long period. Long time use is suggested to use an AC adapter. In order to avoid any damage caused by bad quality AC adapters, please contact the original company, selling you the camera. Loading the Batteries 1. Check if the camera is switched off. 2. Slide the Battery / Memory Card Cover out to open it. 3. Load 2 x AA batteries into the battery chamber, following the polarity indications. 4. Close the Battery / Memory Card Cover. Using an AC Adapter 1. 2. 3. 4. 5. Check if the camera is switch off . Make sure the AC adapter is 3.3V/2.0A. Connect the AC adapter connector with the DC In socket on the camera. Connect the adapter itself with the power outlet Switch on the camera. Note The below symbols are the indication of the battery status on the TFT LCD Monitor. ( ) : Battery power is full. ( ) : Battery power is half drained. Have new batteries ready. ( ) : Battery power is drained. Replace the batteries you are using now. Note Please refer to the suggested battery shown below to ensure the normal operation of the camera. Brand Duracell(Ultra) Type Alkaline Inserting an SD Card 1. Switch off the camera. 2. Open the Battery / Memory Card Cover. 3. Insert the SD card into the card slot and press it down until a click sound happens 4. Close the Battery / Memory Card Cover. 10 11 Getting Ready Note If a new SD card is used, you are required to format it first. Please refer to page 24 for details. Note With a built-in flash memory, the image(s) can be stored either in it or in memory card. Only if the memory card is inserted, the images will be stored in the memory card rather than the built-in flash memory. On the other hand,the images will be stored in the built-in flash memory only if a memory card is not inserted. Getting Started Basic Photography 1. Open the lens cover. 2. Switch on the power. 3. Set the Mode Dial at Shooting Mode ( ) for still image or Movie Clip Mode ( ) for video recording. 4. The setting of the focus range for still image capture is required as follows Macro ( ) : 0.2m Normal ( ) : 0.8m~infinity 5. Refer to the next section -- Advanced Functionality Settings (page14) to set up the features you prefer. 6. Hold still and press down the Shutter Button. 7. The LED Indicator starts blinking right after the Shutter Button is released. 8. Once the LED Indicator stops blinking, you are ready to take another shot. Note A message of "LENS COVER" blinking on the TFT LCD Monitor as a warning is to remind you of opening the lens cover first. Note A message of "Low Light!" appearing on the TFT LCD Monitor as a warning is to remind you that the image that you are going to capture is under a low light environment. To compose a good quality image, it is strongly recommended to go to the Flash Mode to select Auto Flash or Fill-in Flash tosupply more light sources. Removing an SD Card 1. 2. 3. 4. Check if the camera is switched off. Open the Battery / Memory Card Cover. Press down the SD card and the card will jump up. Close the Battery / Memory Card Cover. Attaching the Wrist Strap 1 S 2 3 4 5 12 13 Advanced Functionality Settings Under Shooting Mode ( Setting Focus Range Macro ( ) : 0.2m Normal ( ) : 0.8m~infinity Advanced Functionality Settings Setting Self-timer (Preset: Off) The self-timer starts with the countdown for 10 seconds. The self-timer will be automatically cancelled once the shoot is done. ) Turning On or Off the TFT LCD Monitor (Preset: On) You can change the icon display on the TFT LCD Monitor, turn it off, and turn it on again by pressing the LCD button in order. Setting Digital Zoom ( 4X continuously ) The zoom bar, appearing on the left on the TFT LCD monitor, shows the current digital zoom position. Setting Flash Mode (Preset: Auto Flash) You can change the flash mode shown below according to the environment. Note Generally speaking, the digital-zoom image quality, compared with non-digital-zoom, always decreases sharpness. Auto Flash The flash fires automatically as required under shooting mode. Auto Flash with To avoid the subject's eyes appear red in the picture, use this mode Red-eye Reduction can effectively minimize the likelihood of the red-eye effect. Night Scene Fill-in Flash Flash Off The flash will flash and the exposure time is set to 1/4 second so that the subject in the foreground and the background are properly exposed. The mode will enable the flash to fire in any circumstances. The mode will disable the flash to fire in any circumstances. 14 15 Advanced Functionality Settings Setting Image Size (Preset: 2048 x 1536) Advanced Functionality Settings Setting Image Quality (Preset: Fine Quality) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Note Four resolutions provided can be selected as follows: ( ) 2560 x 1920 (XL) ( ) 2048 x 1536 (L) ( ) 1600 x 1200 (M) ( ) 1280 x 960 (S) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Note Three levels of image quality can be selected as follows: ( ) Super Fine ( ) Fine ( ) Normal Note The better the image quality is set, the less the number of images can be stored in the built-in flash memory or the memory card. Note You can easily check whether the setting is changed or not by the resolution icon display on the right side of the LCD screen. If not, please repeat the above steps. 16 17 Advanced Functionality Settings Setting Voice Memo (Preset: 10 SEC) Advanced Functionality Settings Setting Exposure (Preset: ) Step 1 : To enter the setting mode Step 2 : To select and confirm the Option Step 3 : To select and enter the option Step 4 : To escape the setting Note With the Voice Memo, you can view the icon ( Monitor. Note With the Voice Memo, the audio is stored in WAV file format. So you can download both of the image in JPG and the Voice Memo in WAV on PC. ) on the TFT LCD Step 1 : To enter the setting mode Step 2 : To select and confirm the Option Step 3 : To select and enter the option Step 4 : To escape the setting Note The higher the value is, the brighter the image will be. 18 19 Advanced Functionality Settings Setting White Balance (Preset: Auto) Advanced Functionality Settings Under Playback Mode ( Exploring an Image ) Step 1 : To enter the setting mode Step 2 : To select and confirm the Option Step 3 : To select and enter the option Step 4 : To escape the setting Note Five White Balance modes can be selected as follows: Auto Adjusting the white balance automatically Daylight Sunset Fluorescent Tungsten Note It is suggested to stay AUTO mode for beginners. 20 Step 1 : To enter the setting mode Step 2 : To explore the image Step 3 : To zoom in/out and enter the option Step 4 : To escape the setting Under strong light environment Under sunset light environment Under fluorescent light environment Under tungsten light environment 21 Advanced Functionality Settings Displaying an Image Information Advanced Functionality Settings Thumbnail Images (Small Images) Display Playback of a Movie Clip Note Press Up ( ) and Down ( ) Direction Button to search for the images or movie clips and press Right ( ) Direction Button to see the movie clip. Note The appearance of icon of ( ) represents a movie clip, not a still image. Note Press Up ( ) and Down ( ) Direction Button to search for the movie clip you record and press Right ( ) Direction Button to see the movie clip. Note The appearance of icon of ( ) represents a still image with voice memo. 22 23 Advanced Functionality Settings Deleting Image(s) Advanced Functionality Settings Formatting the Built-in Flash Memory Please make sure no memory card is inserted. Refer to page 24 and follow the steps, selecting "FORMAT" in step 3 , "YES" in step 4. Setting Slide Show (preset: 1 SEC) Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and enter the option Step 4 : To select and confirm the option Step 5 : To escape the setting Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Formatting an SD Card Please inset an SD Card in advance. Follow the above steps, selecting "FORMAT" in step 3, "YES" in step 4. 24 25 Advanced Functionality Settings Setting Image Protection Advanced Functionality Settings Printing Out Images without a PC(Preset : X0) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Note After the above steps are done, please check if the ( ) is shown on the right side of the TFT LCD screen. If it is not shown please repeat the above steps. For canceling this "PROTECT" function, please repeat the steps above and select "UNLOCK" in the step 3 instead. Note After the above steps are done, please check if the ( ) is shown on the left down corner. If it is not shown, please repeat the steps. You cannot see the "PRINT" function on the TFT LCD Monitor if a memory card is not inserted. 26 27 Advanced Functionality Settings Under Movie Clip Mode ( ) (Preset :10 SEC) Setting the Recording Time of a Movie Clip Advanced Functionality Settings Under Setup Mode ( ) Setting Beep Sound (Preset : On) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To escape the setting Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting Setting Auto Power Off (Preset : 2 Minutes) Note 1. Once the Shutter Button is pressed, the camera will start and end the recording automatically according to the time you select. 2. If "Manual" is selected, press the Shutter Button to start the recording or press the Shutter Button again to stop the recording. Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting Note The TFT LCD Monitor will show "Low Light!" as a warning to remind you that the video that you are going to record is in a low light environment. 28 29 Advanced Functionality Settings Setting Date Stamp (Preset : On) Advanced Functionality Settings Setting Date Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting Note If "ON", the date in this image can be printed out. Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To set up the date Step 4 : To escape the setting Setting Quick View Setting Date Type Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting Note This can allow you to view the image on the TFT LCD Monitor right after you take a picture. 31 30 Advanced Functionality Settings Setting Language PC Connection Installing the Camera's Driver Under Microsoft Windows 98/98SE Step 1: Insert the CD into the CDROM Drive. With the auto run program in this CD, click "Driver" to start with the installation. Step 2: A welcome window appears and please click "Next" to the next step. Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting Default Setting Note: If the auto run program fails under certain situation, please go to the Start Menu, click "Run" and key in "CD-ROM Drive:\ AutoRun.exe" and then click "OK" Button. Step 3: The computer starts with the installation. Step 4: The computer starts with the installation of DirectX8.1 if necessary. Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting 33 PC Connection Step 5: Please select "Yes" and click "Finish" to restart the computer. PC Connection Under Microsoft Windows 2000 Step 1: Insert the CD into the CDROM Drive. With the auto run program in this CD, click "Driver" to start with the installation. Step 2: Click "OK" to proceed the installation of DirectX8.1. Note: If the computer has DirectX8.0 or later already, the installation procedure will skip above step 4 and go to the following window directly completing the driver installation. Note: If the auto run program fails under certain situation, please go to the Start Menu, click "Run: and key in "CD-ROM Drive\AutoRun.exe" and then click "OK" Button. 34 35 PC Connection Step 3 The computer starts with the installation of DirectX8.1 if necessary. PC Connection Step 4 Please select "Yes" and click "Finish"to restart the computer Under Microsoft Windows ME/XP The camera"s driver is not required under Windows ME and Windows XP. So, go th page38 for installation of Ulead Photo Explorer or go to page 52 to download the stored image(s) onto the PC. Please click "OK", if the below window prompts. Under Microsoft Windows ME/XP Note: Having DirectX 8.0 or later already, the computer will skip the installation procedure from step 2 above and go to the following window directly. please complete the driver installation with a "OK" Click. This camera, supporting only Mac 9.X or later versions, allows you not to install and driver. Please go to page 42 for installation of Ulead Photo Explorer or go to page 53 to download the stored images onto the PC. 36 37 PC Connection · Installing Ulead Photo Explorer Under Windows 0peratingbystem(Windows98/98SE/2000/ME/XP) PC Connection Step 5: Please read the content of the areement first and click "Yes" to go the next step. 38 Step 6: Please enter your name and your company's name, clicking "Next". Step 1: Insert the CD into the CDROM Drive. Click "Photo Explorer 7.0 SE Platinum:. Step 2: Cick "Install Ulead Photo Explorer 7.0 SE Platinum". Step 7: Step 3: Choose operating language.9 languages offered can be selected, which are Simplified Chinese, Traditional Chinese, English, French, German, Italian, Japanese, Korean, and Spanish. Step 8: Cick "Next" to go to next step. Step 4: As a welcome window appears, Please click "Next" to go to next step. This software will be installed at " Disk C\Program Files \ Ulead Systems \Ulead Photo Explorer 7.0" automatically if you click "Next". Or you can click "Browse" to locate the disk and folder you prefer. PC Connection Step 9: As a new folder named "Ulead photo Explorer 7.0 SE platinum "is generated, click "Next" to go to next step. 39 PC Connection Step 13: If the operating system you are using is Windows 98, 98SE or ME, restarting the computer to complete the installation of Ulead Photo Exlorer 7.0 SE Platinum is required. Please click "Finish" to complete the installation and restart the computer. Step 10 Set up the default TV system. please select the country you are in. Step 11: The installation of "Ulead Photo Explorer 7.0 `SE Platinum" is starting now. You can click "Cancel" to Stop the installation. Step 12: Select the fle association you would like to set and click "Next" to go to next step. 40 41 PC Connection Under Macintosh Opersting System (Mac 9.X or later) PC Connection Step 4: Choose "Ulead Photo Explorer" and copy this file to the desktop. Note If a warning window shows Please visit Apple's official Web-site http:/kbase.info. apple.comm to download the latest version of CarbonLib. Step 1: Turn on the computer. Step 2: Insert the CD inton then CD-ROM Drive. The computer will create an icon named "Driver CD" onn the desktop. a. Key in "CarbonLib" in the search bar and click "Search" button. Step 5: Step 3: Double clicksn onn the icon and choose then language you prefer by doublen clicking on one of the below folders. PEX 2.0: English PEX 2.0F: French PEX 2.0G: German PEX 2.0I: Italian PEX 2.0J: Japanese PEX 2.0P: Portuguese PEX 2.0S: Spanish 42 43 Click on the newly created "Ulead Photo Explorer" icon on the desktop and double clicks onn "Photo Explorer" folder to start Ulead Photo Explorer. b. Download the latest version of CarbonLib. c. Restart the computer. d. Go to the desktop and double click on the icon "Ulead Photo Explorer" to start Ulead Photo Explorer. PC Connection About Ulead Photo Explorer Software license The software described in this document is furnished under a license Agreement which is included with the product. This Agreement specifies the permitted and prohibited uses of the product. Licenses and trademarks ICI Library 1991-1992 C-Cube Microsystems.Ulead Systems, Inc. And the Ulead logo are trademarks of Ulead Systems, Inc. All other product names and any registered and unregistered trademarks mentioned in this manual are for identification purposes only and remain the exclusive property of their respective owners. Technical support Registered users are entitled to Ulead technical support. Our Web site has valuable up-to-date information about Photo Explorer, other Ulead products, and free downloads. Visit our Web site at www.ulead.com, or send an e-mail at support@ulead.com.tw. Headquarters: Ulead Systems, Inc. http://www.ulead.com.tw E-mail: info@ulead.com.tw Japan: Ulead Systems, Inc. http://www.ulead.co.jp E-mail: info@ulead.co.jp Europe: Ulead Systems GmbH http://www.ulead.de http://www.ulead.co.uk http://www.ulead.co.uk/fr E-mail: info@ulead.de North & South America: Ulead Systems, Inc. http://www.ulead.com E-mail: info@ulead.com Asia-Pacific: Ulead System, Inc. http://www.asiapac.ulead.com E-mail: info@asiapac.ulead.com China: Ulead Systems, Inc. http://www.ulead.com.cn E-mail: info@ulead.com.cn PC Connection Software license Before installing Photo Explorer, make sure your computer meets these requirements: * Intel® Pentium® processors (or 100% compatible processors) * Microsoft Windows?95/98, NT 4.0, 2000 or higher * 32 MB RAM (or more) * 17.8 MB available hard drive space for program files * True Color or HiColor display adapter and monitor (recommended) * 800 X 600 minimum display resolution * Windows compatible pointing device * Microsoft Internet Explorer 4.0 or higher * Internet connection (recommended) * 16-bit or better sound card and speakers (recommended) * DirectX 6.0 or higher (for video functions only) 44 45 PC Connection The Browser Just like Windows Explorer, Photo Explorer's Browser shows the hierarchy of drives and folders in your computer at the left hand side and displays the files in a selected folder at the right. What's special about Photo Explorer's Browser is that multimedia files can be shown as visual thumbnails for easier identification. Simply click a desired file to immediately get an idea of the file's contents. You can preview images and actually play sound, video or even GIF animation files without actually opening them. Basic image editing functions are also available for enhancing images. In addition, you can bring together images, videos and sounds to create a slide show. PC Connection Using the Uleadn Photo Explorer Browser: Area Icon Function Open viewer Open new viewer Back Forward Rotate left Customizable Toolbar Folder Tree Preview Pane Address Bar Rotate right Delete Browse Pane Main Toolbar Digital camera wizard TWAIN acquire Slide show Slide Show Storyboard Auto rename Convert Photo Explorer's Browser gives you different folder views. In the Folder Tree, you can switch to the Favorites list to create a collection of frequently visited folders. The Browser also keeps track of Recent folders you accessed and lets you return to them quickly. Print thumbnails Print images Send to (Email out) 46 47 PC Connection Drop Spot Share on Web Display mode change (files detail information big icon) Photo properties Help Zoom in Zoom out Original size Fit to screen Preview Pane Rotate left Invert Rotate right Image Properties PC Connection New Open Save Save As Add Remove Move Rotate Slide Properties Screen Saver Export Package Create Slide Show Disc Stitch Panorama Slider of Zoom in/out Number of selected files Share Show Slide Show Options Slide Show Pane 48 Close 49 PC Connection The Viewer Photo Explorer has a built-in Viewer integrated with the Browser. You can use the built-in Viewer to: Get a full-size or full-screen view of images. Navigate through images using the keyboard, toolbar buttons, or menu commands, or let Viewer automatically step through the images. Copy, rename or delete an image file. Copy an image for pasting onto your desired image editor. Rotate, flip and edit images, and then save the changes. Create wallpapers and screen savers using your images. PC Connection U s in g t he Ul ead P hoto Exp lor er Viewer : Photo Explorer's built-in PC Connection 51 A standalone image viewer, the Ulead Instant Viewer, also comes with Photo Explorer. It is a simpler, independent applic ation and its sole purpose is only for displaying images. Use Ulead Instant Viewer when you want to compare two or more full-size images. Each image will be opened in a separate window. You can also associate file types like JPG, GIF and BMP image files so that they will automatically display in the Ulead Instant Viewer. Downloadingn the Image (s) The Under Windows Operating System (Windows 98/98SE/2000/ME/XP) Downloading Image(s) From Removable Disk 1. Turn on the PC. 2. Switch on the camera. 3. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera. 4. When the USB cable is connected to the PC, it will create a new hard disk named Removable Disk . 5. The stored "image(s) can be found in" Removable Disk\Dcim\100media . 6. View the image with double click. Ulead Instant Viewer windows 50 Downloading Image(s) Through Ulead Photo Explorer 1. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera. 2. Start Ulead Photo Explorer 7.0 SE Platinum . 3. Click "File \ Download From Memory Card" to get the stored image(s). Downloading Image(s) Through Ulead Photo Explorer 1. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera. 2. Start Ulead Photo Explorer 7.0 SE Platinum . 3. Click File \ Download From Memory Card to get the stored image(s). PC Connection 52 53 Downloadingn the Image (s) Under Macintosh Operating System (Mac 9.X or later) Downloading Image(s) From Removable Disk 1.Turn on the PC. 2. Switch on the camera. 3. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera. 4. When the USB cable is connected to the PC, it will create a new icon named "untitled" on the desktop. 5. Double click on the icon. 6. The stored image(s) can be found in the folder of DCIM \ 100MEDIA \ . 7. View the image with double click.