User manual KOBIAN IXA330I

USER'S MANUAL Version: 1.0 Page 1 2/17/20 1. Locating the Controls Appearance & Keys LCD Window Battery The player is in 9-level battery monitoring system. indicates that battery is 1.5V and the power in battery will become less when using. indicates low battery power and new battery should be inserted. 2. Basic Operation Entering Menu System Pressing Mode button may enter the menu system, including main menu (long press of mode key at Stop mode), submenu at Play mode (press to enter) and submenu at stop mode (press to enter). Version: 1.0 Page 2 2/17/20 Browsing ¡ð Browsing music files or menus ¡ð Fast forward or fast backward when playing music Entering Different Modes You may enter different modes from the main menu. Main menu: (long press Mode button) Music mode: Record mode: Voice mode: FM mode(optiuonal): Tel Book: System Setting: USB Mode when connecting to PC: Version: 1.0 Page 3 2/17/20 Volume Control Turn On/Off Hold When Hold is ON, any operations on buttons will be displayed as: When Hold is ON, USB mode will be displayed as: Now the "Write-Protect" function of USB disk is ON, and no data can be written in the player unless the Hold is pushed Off. Play& Stop (Pause when recording) You may press Play button to fast exit from any menu or option interfaces. 3. Keys Operation Music mode Operation Play Action long press press long press and Voice mode Stop Status turn off play enter main menu enter Stop-submenu next song stop enter main menu Enter Playing- submenu play next song Play Status turn off Playing- Submenu turn off exit from menu enter main menu confirm current option or enter next submenu switch submenu Stop-Submenu turn off exit from menu enter main menu confirm current option or enter next submenu switch submenu Mode press push Next Version: 1.0 Page 4 2/17/20 push on push continuous forward browse previous song continuous backward browse volume increase volume increase continuously decrease volume decrease volume continuously fast forward play previous song fast backward volume increase volume increase continuously decrease volume decrease volume continuously continuous forward switch submenu continuous backward continuous forward switch submenu continuous backward Last push on press X X X X X X X X Vol+ press on press Vol- press on Record Mode Operation Play Mode Action long press press long press press Stop Status turn off start recording enter main menu enter Record submenu Record Status stop recording pause recording X X FM Mode (optional) Operation Play Action long press press long press turn off X enter main menu enter main menu increase 100KHz gradually or stop search Increase 100KHz search continuously decrease 100KHz gradually or stop search decrease 100KHz search continuously volume increase volume increase continuously volume decrease volume decrease continuously FM Status turn off FM Submenu quit from menu enter main menu confirm current option or enter next submenu switch submenu continuous forward switch submenu continuous backward Mode press push press on push Push on press press on press press on Next Last Vol+ Vol- X X X X 4¡¢ Play Music Basic Operation 2. Push the HOLD switch to Off. 1. Connect the earphones Version: 1.0 Page 5 2/17/20 3¡¢ Long press Play button to turn on the player and enter Music mode. Press Play button again to play music. 4.To select music Last£º to select previous music Next: to select next music Turn On: Play: 5.To adjust the volume VOL+: to increase volume VOL-: to decrease volume Note: When HOLD is ON, any other buttons on the player will not function. In case of Play and Recording status, the player automatically turns off according to the setting of "Power Off" on the menu of "System Setting/Power Off /Off Time". EQUALIZER Mode 1.Playing music status 2.Press Mode button to enter Play Submenu 3.Push Next switch to select Equalizer menu 4. Press Mode button to enter EQUALIZER selection Menu. 5.Push Next button to switch, and press Mode button to confirm Equalizer options: £¨ £¨ £¨ £¨ Natural£© Rock£© Pop£© Classical£© £¨ Soft£© £¨ Jazz£© £¨ DBB£© Select: Confirm: 5¡¢ Record Voice Make sure that the battery is not in the status of "low battery". The player may save 99 recording files under each directory. Start recording in Record Mode Version: 1.0 Page 6 2/17/20 1. Enter main menu. 2. Push Next switch to select recording mode. 3. Press Mode button to enter Record mode. 4. Press Play button to start recording. 5£® Press Play button to pause recording .( the time icon flickers) 5. Press Play button to continue recording . 6. Long press Play button to stop recording . NOTE: The recorded file is saved in the current folder set in "Recording Stop submenu/ /Local Folder". If "Overflow" is displayed on the LCD, the player's memory is full. Please delete other files to make some space available. If "over record" is displayed on the LCD, the current directory has already had 99 recording files. Please switch to another directory. Select Recording Type 1. On the status of Stop Recording 2. Press Mode to enter Record Submenu. 3. Push Next to select REC Type option 4. Press Mode to enter this option Version: 1.0 Page 7 2/17/20 5. Push Next to select desired recording type 6£® Press Mode to confirm the type selected 7. Press Play to start recording Recording Type: Note: Voice control record means is the Player can automatically pause when no sound 6. Play Recorded Files 1. Enter main menu. 2. Push Next to select "Voice mode". 3. Press Mode to enter Voice mode interface. 4. Press Play to start playing. 5. Select recorded files: Last: to select the previous recorded file Next: to select the next recorded file 6. Control Volume: VOL+: to increase volume VOL-: to decrease volume 7. How to use FM(optional) 1.Enter main menu. 2.Push Next switch to select FM Mode. 3. Press Mode button to enter FM mode Version: 1.0 Page 8 2/17/20 4.Press Mode button to enter FM mode submenu 5£® FM submenu options Introduction Search mode Select Search mode icon at the FM mode menu, and then press Mode to enter Search mode interface is as follows : Freq Mode function£º Push Last/Next button and the player forward or backward single step 100KHZ to manual search station£» Push on Last / Next button for about 2 seconds, and the player scans forward or backward per 100KHz, and stops at the scanned station. If you want to stop scanning, push Last / Next switch to stop. Search station function£º If the player exist more than one station, Push Last/Next button to listen to the station . Auto Search function£º When selecting Auto search function ,The player can auto scanned frequency between 87.5MHZ and 108MHZ and save to scanned station Search level There has eight grade, Auto search starch station demand to signal intensity more high when the grade more high Save Save station is manual scanned in sequence, US Band can save maximum 20 stations . Delete Delete station is exit¡£ REC type At the FM mode submenu, select the icon and press Mode button enter the REC type selected interface, then push Next button to choose "Fine REC" or "Long REC" and again press Mode button to confirm to enter REC interface. Other operations refer to the section of "Record Voice" Note£º If the current station is in STEREO status, such icon " " will be displayed on the LCD . Version: 1.0 Page 9 2/17/20 8. Tel Book 1£® Enter main menu: 2£® Push Next button to select the Tel Book mode£º 3£® Press Mode button enter Tel Book submenu interface is as follows: 4£® Submenu options introudce£º Browser Tel User can browser the Tel Book information in MP3 player. Import Tel file Use the telephone directory processing tool can create the Tel Book file of Tel_save.bin in PC, put it in root directory of U-disk ,this function can import it in MP3 player . Export Tel file This function can export the Tel Book information from MP3 player and save it is make a readable text file of Tel_Expt.bin in root directory of U-disk . 9. System Setting System parameters can be set here and every option varies according to firmware upgrading Enter main menu ,push Next button to select System setting icon, and then press Mode button to enter System Setting submenu interface is as follows: Parameters Introduction £¨ £¨ £¨ £¨ Record time£© Backlight£© Language£© Power off£© (Replay mode£© £¨ Contrast£© (Back color) £¨ £¨ Online Mode£© Memory info.£© Set the time and date when recorded files are saved set the period of time (sec.) when Backlight stays on without any operation set different languages displayed set a fixed time after which the player may turn power off automatically set working status on Replay Mode set contrast level of LCD window Set different back color. an option specially designed for "Private Space" function show memory capacity and percentage that has been used Version: 1.0 Page 10 2/17/20 £¨ £¨ £¨ £¨ Animation£© Logo£© Firmware version£© Firmware upgrade£© £¨ Exit£© Set different animation picture when the player power on displayed Set different Logo picture displayed when the player power on show firmware version special for firmware upgrading exit from current interface Instruction ¡ð "Record Time" 1. System Setting Interface 2. Press Mode to enter Record Time Interface 3. Press VOL+ to set time in sequence of "YY-MM-DD" (Press VOL- to set in opposite sequence) Icon of year flickering: 7. Push Next / Last button to adjust numbers Number of Year increasing: 8. Press Mode to confirm and exit the current interface. ¡ð 1£® "Back light" setting At System Setting interface, push Next key to select "Back light" icon 2£® Press Mode button to enter "Back light" setting interface: 3£® 4£® Push Next/Last button to adjust time Press Mode to confirm to exit. ¡ð 1£® Language At System setting interface, push Next/Last button to select "Language" icon: 2£® Press Mode button to enter "Language" setting interfance: 3£® Push Next/Last button to select desired language. The icon correspond language Version: 1.0 Page 11 2/17/20 Simple Chinese English Trad Chinese Japanese Korean French Italian German Spanish Swedish Portugal Danmark Dutch Note: Other Czech, Poland, Russia and Tai languages are available too. 4£® Press Mode to confirm to exit. ¡ð Power Off Operating steps refer to Language setting. Off Time mode refers that after a fixed period of time (unit: second) when no operation on keys at Stop mode, the player may turns off automatically to save power. If "0" is selected, power saving function is invalid. Sleep Timer refers that you may set a fixed period of time (unit: minute) for the player to turn off automatically when no keys operation no matter which mode it is at. This function is specially designed for listening to music before sleep. Note: Setting of Sleep Timer is valid only once and the set time will be cleared after power off. The time needs to be set again next time. ¡ð Replay Mode Operating steps refer to Equalizer Setting Manual Replay means that at A-B Replay Mode the endpoint B can be set manually only. Auto Replay means that at A-B Replay Mode the endpoint B can be set automatically. (Especially for English Reading files without music) ¡ð Contrast Operating steps refers to Backlight setting. ¡ð Back color Operating steps refers to Language setting. Version: 1.0 Page 12 2/17/20 The number icon correspond to color list is as follows: 1£º 2£º 3£º 4£º 5£º 6£º 7£º 8£º Green Red Blue Green Green Red + Green seven + Red + Blue Blue + Red + Blue color Loop ¡ð Online Mode Operating steps refers to Equalizer setting. Some operating systems (under Windows 2K SP4) can not support two driver letters in one USB disk. Thus, if "Private Space" function is on, choose which disk you are going to use, i.e., "single ordinary disk" or "single encrypted disk", in order for correct display of selected disk after connecting to PC. ¡ð Memory Info. The number displayed represents total memory capacity and the percentage refers the capacity used. ¡ð Animation Firmware Version information the player uses can be obtained here. ¡ð Logo Operating steps refers to Language setting.. ¡ð Firmware Version Operating steps refers to Language setting.. ¡ð Firmware Upgrade It is specially designed for Firmware Upgrade. Tips: After pressing Mode button to select options, you may press Play button to exit from menu directly. The operation on Play button for direct exit is valid to all menus. 10. USB Disk The player supports standard USB disk function with operating system of Windows98 (driver needed), Windows 2K and above (driver free), Mac OS 10.3 and above, Linux Redhat 8.0 and above. The player supports power supply through USB. At Standby Mode, press Mode to quit to main menu, then select to enter desired mode. The player also supports Suspend Mode. How to connect to PC? Turn on the player and plugs the USB cable to enter the following Mode 1. The player may display three modes after connecting to PC: Version: 1.0 Page 13 2/17/20 1£® Standby State 2£® Downloading state 3£® Uploading Mode ¡ð New Folder The player can identify the 99 folders set up in the Movable U-disk. 11¡¢ Select Folders Select Folders (At Stop Submenu) Users can save files in different folders (folders should be set up on PC in advance), to manage and play files according to different types. The player supports identification of 99 subdirectories. 1. At Stop interface. (Current example is at Music Mode, and folders can be selected at both Record and Voice Mode as well.) 2. Press Mode to enter Stop Submenu. 3. Press Mode again to enter Select Folder interface. 4. Press Next or Last to select folders. 5. Press Mode to confirm the folders selected Note: Independent folders can be set at corresponding modes as Music Mode, Record Mode and Voice Mode, i.e., three modes are not bound to correspond with the same folder. Delete File (At Stop Submenu) Files and FM stations can be deleted at corresponding modes as Music Mode, Voice Mode and FM Mode. 1. At Stop Interface.£¨ No Stop Interface exists at FM Mode.£© 2. Press Mode to enter Stop Submenu. Version: 1.0 Page 14 2/17/20 3. Press Next/Last to select "Delete" or "Delete All". 4. Press Mode to enter Delete Interface. 5. Push Next to switch between "NO" and "YES". 6. Press Mode to confirm and deletion starts. "Delete All" means to delete all the relevant files at current mode in current folder. (For example, at Music Mode executing "Delete All", all the music files in current files may be deleted, while recorded files without change.) The deleting interface is much simpler at FM Mode, only to the 3rd step. It is the saved stations to be deleted. When deleting files on PC, please take care to eject the player safely before pulling out USB cable, otherwise files may not be deleted. Play Mode (Play Submenu) When playing music and recorded files, different play modes can be selected. (such as Repeat, shuffle, etc.£© The first option in Play Submenu is Play Mode. The player will play files according to the mode selected. Version: 1.0 Page 15 2/17/20 Tempo Rate (Play Submenu) When playing music(Only for MP3 formats) or recorded files, different tempo rate can be set (faster or slower) without changing the tone and sound. 1. When playing music files 2. Press Mode to enter Play Submenu 3. Push Next to select Tempo Rate 4. Press Mode to enter Tempo Rate 5. Push Next to quicken tempo rate and push Last to slow down tempo rate. 6.Press Mode button to confirm desired tempo rate to exit the current interface. Note: Tempo Rate set is suitable to each music files till it is changed. Replay Mode Enter Play Submenu to enter. ¡ð A-B Replay 1. At Music Mode or Voice Mode 2. Press Mode to enter Play Submenu. 3. Push Next to select "Replay". 4. Press Mode to enter Replay. : "A" flickers in Replay Mode icon 5. Push Next to set "A". and start point is to be set. Version: 1.0 Page 16 2/17/20 After "A" set, "B" flickers in icon 6. Push Next to set "B". , and endpoint B needs to be set. Replay icon is fixed and A-B segment replay begins. When replay times count up to times set in advance, the player will quit from Replay Mode. At Replay Mode, pushing Last can set "A" again to select another segment. (Setting of replay times refers to "Replay Times" in the next section. At Replay Mode, Press VOL+/VOL- may set Tempo Rate directly. ¡ð Follow Read (This function does not exist at Voice Mode) 1. Replaying A-B segment, Push Next to enter Follow Read Mode. 2. Replay icon changes to Follow Read icon , and record sound of users is recorded. The recording time is as long as A-B segment. 3. After recording time, the icon changes to Comparison. At this mode, pushing Last button may return to A-B Replay Mode. Comparison (This function does not exist at Voice Mode) 1. Enter this mode, Replay icon changes to and the recorded sound of users is played. , and original sound is played , and original sound is played. Push Next button to enter 2. After playing the recorded sound, the icon changes to 3. After playing the original sound, the recorded sound is played again. The whole procedure will not stop (without limitation by Replay Times) until press Mode to exit. At this mode pushing Last may return to Follow Read Mode. At the three modes above, pressing Mode may exit from Replay Mode directly. Replay Times (Play Submenu) Operating steps refer to Backlight setting. Replay times mean that after A-B segment has been replayed up to fixed times, it will exit from Replay Mode. Replay Gap (Play Submenu) Operating steps refer to Backlight setting. Replay gap means the break period between different playing times (unit: second). Version: 1.0 Page 17 2/17/20 12.Strong Recommendation Private Space function Many MP3 users are puzzled by the problem of information disclosure and private data accessed by others. When others borrow MP3, you may have to delete the private information, which may cause big bother. However, the "Private Space" function provided by this player completely solves the bothering problem. Users may divide USB disk of this player by its accessory tools into two parts in any proportion (users may see two driver letters on PC. But SP4 should be installed on operating system of Windows 2K, otherwise only one driver letter can be seen. Without such installation, users must choose "single ordinary disk" or "single encrypted disk" in "Online Mode" of "Sys Setting" menu.), and one part can be encrypted as private space which needs password to access to. (If users do not encrypt both parts, USB memory may be treated as two disks.) Such is the great "Private Space" function. 1. Connect the player to PC. 2. Run the accessory installation tools "MP3 Player Disk Tool". 3. The first is format tool. Choose "Partition and encrypt" option, and set a desired capacity for the encrypted disk, then choose the setting of username or password. Fill the username in the blank "New username", and password in the blank "New password", then input the same password again in the blank "New password Confirm". After the above operation, click "Start" button, and partition starts. Version: 1.0 Page 18 2/17/20 4. Partition finishes with hints as follows: 5. Press "OK", then PC may restart. 6. Two disks may be displayed after restarting (only one driver letter may be displayed when under Windows 2K SP4). Click to access the encrypted disk (the second one), and there are three files in it, two private files and one executable file with only 300K memory space. 7. Run the executable file "RdiskDecrypt.exe", and input username and password in dialog box. If they are correct, disk can be accessed and files can be copied. 8. Username and password is required to access to the encrypted disk in every connection to PC. Version: 1.0 Page 19 2/17/20 Note: Dividing one disk into two parts may erase the data in it. Please backup the data in disk before division. And merging two parts to one may also erase the data. Warning: Do not lose the user name and password you've input, otherwise you can not access to the encrypted disk and you have to merge the two parts to cancel the encrypted disk with files in it losing. Trouble Shooting No Power Check whether the battery have been inserted properly. Check whether the player is turned ON. Check whether Volume is set "0" and connect the headphone plugs firmly. No sound is heard from headphone. Check whether the headphone plug is dirty. Corrupted MP3 may make a static noise and the sound may cut off. Make sure that the music files are not corrupted. Characters in LCM are corrupted Adjust the position of the headphone and player. FM Reception is poor. Turn off the power of other electric devices near the player. The headphone may be used as the antenna. Download of music files fails. Check whether USB cable is damaged and is connected properly. Check whether driver is installed correctly. Check whether the player's memory is full. Check whether the right language has been selected. Specification Dimension Weight LCM Window PC connection Flash memory Battery 93x30x23mm 25g£¨ without battery£© 132×32 LCM High-speed USB1.1 £¨ Read: 1000K Byte, Write: 800K Byte£© 64M-128M-256M-512M-1024M 1¡Á AAA Alkaline cell Max Play time: 8 hours Sample rate Recording format Recording time Max output of headphone MP3 bit rate WMA¡¢ WMV¡¢ ASF bit rate Frequency response SNR Receiving frequency range Stations saved Record 8KHz WAV£¨ 32K bps£© ¡¢ ACT£¨ 8K bps£© 35 hours£¨ ACT£¬ 128M Flash£© £¨ L£© 10mW£«£¨ R£© 10mW£¨ 32Ohm£© 8K bps ­ 320K bps 5K bps ­ 384K bps 20Hz to 20KHz 85dB 76MHz ­ 96MHz / 87MHz ­ 108MHz 20£« 20 Page 20 MP3¡¢ WMA¡¢ WMV¡¢ ASF FM radio Version: 1.0 2/17/20 Music format Working temperature multi- language show Operating System Max output of headphone £¨ L£© 10mW£«£¨ R£© 10mW£¨ 32Ohm£© SNR 45dB MP1¡¢ MP2¡¢ MP3¡¢ WMA¡¢ WMV¡¢ ASF¡¢ WAV -5 to 40 ¢J Simple Chinese £¬ Trad Chinese £¬ Japanese £¬ Korean £¬ English £¬ French £¬ Italian £¬ German £¬ Spanish £¬ Swedish £¬ Portugal £¬ Danmark ,Dutch , Czech, Polish, Russian, Tai. Windows98/SE/ME/2K/XP¡¢ Mac OS 10¡¢ Linux 2.4.2 Note: Product design and spec may change without notice. Version: 1.0 Page 21 2/17/20