User manual KOBIAN IXA365I

Introduction Thank you for purchasing the MP3 player. It is a digital audio player. You do not need to carry a cassette tape or CD anymore. With the player, enjoying CD-quality music becomes a breeze. You can store dozens of MP3 files in the built-in flash memory. Also, you can listen to the radio or even record your favorite radio program, an interview, conversation or lecture. The sound in this light shock-resistant player will not skip or stretch at all. The file name and MP3 track title are also conveniently displayed on the LCD in the middle of the player for easy reference. Accessories Stereo Earphone USB Cable Installation CD Manual 1 AAA battery System Requirements Pentium 166 MHz, 32MB memory 20MB hard disc space USB 1.1 port CD-ROM Drive 4X speed or above Microsoft Windows 98 / 98SE / 2000 / XP Knowing your MP3 Player LCD 128*64 pixels, OLED 5-ways Switch Press the 5-ways switch to enter MENU Dial the 5-ways switch up or down to increase or decrease the volume level Dial the 5-ways switch left or right to skip to previous or next track Dial and hold the 5-ways switch left or right to fast forward or reverse within the current track USB port Upload/ download files via this port with the USB cable connected to computer SD/MMC Supports normal MMC/SC cards Earphone Plug the earphone into the jack for listening to the player Hold switch EQ Press the button to switch 5 play modes - Normal, Rock, Jazz, Classical and Pop Play / Pause / Power Button Press the button to power on the player, Playback or pause playback of music or voice files, Press and hold to power off the player REC / A-B Press and hold the button to record music or voice files, Press to repeat between section A and B during music mode Connecting to PC Power on your computer. Plug the flat USB connector of the USB cable we attached to a USB port of your computer. Plug the mini connector of the USB cable we attached to the player. The player will power on automatically. "Ready" appears on the LCD of the player, indicates the connection with the computer has established successfully. When the player is connected to your computer, it starts working as a removable hard disk on your computer. You can transfer, copy, paste and delete the data (audio files, voice recording files, etc.) that stored on your player into your computer very conveniently. It can also be used for storage of non-music files. Function & Keys Instructions Play the Music When you press Play/Pause button, you will see the below pictures show the player in which play mode, music serial number/total number, playing time, music singer and name. At lowest row, it shows music name or ID3 information. When the player is in status of play and you press Play/Pause, the player will pause playback. To skip to previous or next track, please dial the 5-ways switch left or right (FF/REW). To power off the player, please press and hold Play/Pause for 3 seconds. When the player is in status of play or pause, you can dial the 5-ways switch up or down to increase or decrease the volume level. The adjusting range of volume is 32 levels. To fast forward or reverse within the current tract, please dial and hold the 5-ways switch left or right. Note: When the player is in status of play, the battery volume may flop because different power consumption will make the battery volume librating. Menu Press the 5-ways switch to enter MENU and dial it left or right to choose sub-menu, then press it again to enter sub-menu as below. Select Music to go into playing mode of music. Select Voice to go into playing mode of recorded voice WAV files. In such status, you still can choose the corresponding function in the same menu. Select FM Tuner to enter radio interface. Select Setting to enter parameters setting menu. Select Delete File to enter files deleting interface. Select Information to enter information interface. Select Record to enter recording interface. FM Function Adjust frequency - Press the 5-ways switch to enter menu and dial it to select FM, then press the switch to enter Preset mode as below. The Preset mode ­ It sets 20 fixed channels. The first time you enter the mode, the player will search channels automatically. After searching, you can choose each channel by dial the switch left or right. The Manual mode ­ Press the switch to enter the interface as below. You can adjust channel manually by dialing the switch left or right. Dialing once; 100kHz will be changed. Dialing and hold the switch, frequency will be changed 100kHz continuously. If you want to save the frequency you adjusted manually, press the A-B button shortly. Then, the channel will be saved in the Preset mode for listening in the future. FM Radio Recording You can record FM programs as MP3 or WAV files. Press and hold the A-B button to enter recording interface as below. Press the 5-ways switch to pause the recording. Press it again to keep recording. Press Play/Pause to stop recording and return to FM sub-menu. If you want to back to the Music or voice mode to listen to the files you recorded, please press and hold the 5-ways switch. Note: The volume control is still useful by dialing the 5-ways switch up or down. Set Recording Setting You can record files by built-in microphone and FM. Press the 5-ways switch to enter menu and dial it left to select Setting. Press the switch to enter Setting and dial it left or right to choose Rec Setting. Press the menu button to enter Rec Setting as below. 1. Select Source to set the recording sources, microphone or FM. If you choose microphone, the voice or music will be recorded by built-in microphone from outside. If you choose FM, the voice or music will be recorded from FM programs. 2. Select Encoder to set the format of recorded files, including MP3 and WAV. You can press the Menu button for selection. 3. Select Quality to set the quality of recording files, including high, middle and low levels. The better the sound quality is; the more space it takes. Please select it depends on your needs. Recording Operation There are 2 ways to begin recording. 1. Recording by press and hold REC / A-B button ­ The recorded files will be named and saved automatically to Voice folder at root directory as M010.MP3 or V007.WAV. As below pictures, the LCD shows present LCD shows present recording time, left recording time and file name. To pause recording, please press the 5-ways switch. Press it again to keep on recording. Press Play/Pause button to stop recording. Press Play/Pause again to play the recorded file. 2. Press the 5-ways switch to enter menu and dial it to select Record, then press the switch to enter recording interface as below. To pause recording, please press the 5-ways switch. Press it again to keep on recording. Press Play/Pause button to stop recording. Press Play/Pause again to play the recorded file. Play Recorded files To play recorded MP3 files, please enter menu and select Music. To play recorded WAV files, please enter menu and select Voice as below. Choose the recorded file that you want to play by dialing the 5-ways switch left or right, then press Play/Pause button to play the WAV file. When you stop recording, you can press Play/Pause button to listen to the recorded file immediately. The playing picture is as below. If there are no recorded files or it's the first time you enter the interface, No Files will be shown as below. To press the menu button, you can also enter the function menu to finish all selections and the settings. To press Play/Pause to stop the status of playing and back to Voice interface. Note: To play MP3 recorded files must under Music mode. To play WAV recorded files are required to under Voice mode. Set MP3 Equalizer There are 2 ways to choose different play modes to enjoy music better. 1. Press EQ button once; play mode will be changed once. 2. Press the 5-ways switch to enter menu and dial it to select Setting, then press the switch to enter EQ sub-menu. It has 5 play modes ­ Normal, Rock, Jazz, Classical and Pop as below. If you don't want to change the current setting, choose EXIT to quit the sub-menu. Then press and hold the 5-ways switch to back to the Music mode. After setting, EQ mode will be shown in the playing interface as below. 8. Set Repeat Mode Press the 5-ways switch to enter menu and dial it to select Setting, then press the switch to enter Repeat sub-menu. It has 5 repeat modes ­ Normal, Repeat Track, Repeat All, Shuffle, and Shuffle Repeat as below. Repeat Track: a certain piece of music plays loopy. Repeat All: all music play continuously and orderly until you do other operation. Shuffle: play at shuffle one music. Normal: All music plays orderly once and the player stops playing. Shuffle Repeat: all music plays at shuffle without order. If you want to back to the Music mode, please choose EXIT to quit the sub-menu, then press and hold the 5-ways switch. Repeating Function If you need to listen to some segment repeatedly, like language study, you can use the function by pressing A-B button to choose the segment. When the player is in status of play, please press A-B to set the start point (A) and press it again to set the end point (B) as below. (A) (B) The player begins to play the repeated segment. To Press A-B or left/right to choose another music to cancel the loop function. Set Automatically Closing Time There are 5 times for optional to power off the player automatically. Press the 5-ways switch to enter menu and dial it to select Setting, then press the switch to enter Auto Off sub-menu as below. Select Disable, the player will not close automatically. Select 1 Min, 2Mins, 5 Mins or 10Mins, the player will close automatically at the corresponding minutes under stop or pause mode. If you want to back to the Music mode, please press and hold the 5-ways switch. Delete Files You can use menu function to delete the files in the player or format them by the management software we attached. Press the 5-ways switch to enter menu and dial it to select Delete, then press the switch to choose music or voice files that you want to delete as below. To choose music or voice files, you will enter the delete interfaces as below. If you don't want to delete the current file, please choose NO to back to the sub-menu. Select the file you want to delete and choose YES to back to the sub-menu. Then you can continue deleting files. If you want to back to the Music mode, please press and hold the 5-ways switch. View the Using Volume of the Player Press the 5-ways switch to enter menu and dial it to select Information, and then press the switch to enter as below. Note: If total volume and left volume are not shown on the LCD correctly, please format the player with the management software to insure the correct showing data. Display lyric Function Lyric files are of LRC format and they have the same name with the corresponding music files. You can download them by "Mini Lyric" or make them by special tools. When playing music, the screen will show two lines of lyric if the music has corresponding lyric. Files Browser Function Choose FOLDER item and the file list is showed in the screen. You can choose each file with the left/right button in the wheel. Choose music file and press the MODE button, the menu will be popped out, as picture one: choose PLAY to play the music being chosen; choose PLAYLIST to pop out submenu as picture two: choose ADD to add the music to the PLAYLIST, choose EXIT to delete the music from the PLAYLIST; choose DELETE to delete the music file; choose EXIT to exit the menu. Choose folder and press the MODE button to enter this item, the whole content of the folder will be showed. Press VOL-button to return the parent menu; Press MODE to return to the play mode. User Interface For the convenience of users, the player has 8 language items for users to choose. Whatever language you choose, the screen and ID3 information will show the corresponding language. For the convenience of users' operation, the content of the English. current language is shown in Trouble Shooting Before using, we strongly suggest to install the management software first and format the player. In win98, please install the management software and connect the player to recognize device. During transferring process, the speed shown in the computer is faster different because of different OS, so the speed should be up the player. The transferring speed of the player is shown with animation. The stopping of animation means the end of transfer. Plug and play function is only for Win2000/XP. It doesn't support Win98 and Win98SE, so please install the driver in management software. Q: No reaction on the player when press the Play/Pause button. A: There is no battery or the battery power is consumed. Please install a new battery. Q: After opening the player, no reaction when press buttons. A: The hold switch is locked. Unlock the switch and try it again. Q: After connecting, the mobile storage icon of the player can't be found. A: You may not install the management software, or the application has be corrupted. Install the application again. Or the mainboard has no USB port. If so, please contact mainboard agent for upgrading. Q: The time is shown in a mess when music is played. A: The MP3 files compressed with the VBR format will cause the time change during playing. You can compress them with the fixed rate format to solve the time problem. Q: Up-plug the player brings out abnormity of the computer. A: It's for the plugging or up-plugging of USB. In order to avoid the problem, we suggest don't up-plug the USB while transferring. Q: The response of pressing button is slow and earphone doesn't work normal. A: The compressed format may not be supported by the system or the rate is beyond the following rate. Please delete the music or compress the music according to the standard with some tools again. The music format supports MPEG I Layer 3, MPEG I Layer 2, MPEG I Layer 1, MPEG 2 Layer 3, MPEG 2.5 Layer 3 and WMA. The rate range of MP3: 32Kbps~256Kbps. The rate range of WMA: 64Kbps~192Kbps. Q: Why isn't the general memory shown same in fact? A: The player stores application and Chinese character library, so the memory shown is smaller than the actual. Q: Why do the preferences often lose? A: We often save preferences in Setting.dat. If you delete files or format the player, these preferences will lose, so you need to set again. Technical Specifications Memory Battery LCD Signal / Noise Earphone Output Music Format MP3 Record Format Language Library 64 / 128 / 256 / 512M One AAA battery 128 * 64 pixels, OLED 75db 5mW + 5m W MP3, WMA, WAV MP3, PCM WAV ISO 8859 Handleiding Accessories 1. De accesoires van uw MP3 speler Installatie CD USB verleng kabel Handleiding 2. Gebruik 2.1 Power aan / uit AAA batterij Druk op de Play/Pause/Power knop. De `Power-aan' afbeelding verschijnt Druk op de Play/Pause/Power knop en houd deze ingedrukt totdat bovenstaande afbeelding verschijnt en de voortgang indicatie verdwijnt. De MP3 speler is dan afgesloten. 2.2. `Hold' funktie Beweeg de hold knop in de richting van de pijl. De Mp3 speler zal de hold afbeelding weergeven. Alle funkties zijn nu uitgeschakeld. U kunt de hold funktie uitschakelen door de knop terug te bewegen. Verbind de USB aansluiting van de MP3 speler met de aansluiting van uw PC. (De meegeleverde USB kabel kan hiervoor gebruikt worden). De bovenstaande afbeelding `connect' zal verschijnen in uw MP3 speler. 2.4 Display 1 2 3 4 5 6 8 9 7 11 1. Afspeel status 2. Equalizer effect `3. loop' status 4. Volume 5. `locked' status 6. Batterij status 7. Herhaal teken 8. De actuele muziek 9. Afspeel tijd 10. Artiest Bestands naam 2.5 Afspelen van muziek Uw MP3 speler ondersteunt WMA/MP3 bestanden. Nadat de MP3 speler geactiveerd is, drukt u kort op de play/pause/power knop om bestanden af te spelen. U kunt stoppen door de knop nogmaals in te drukken. Door de menu knop naar links of naar rechts te bewegen (REW/FF) kunt u naar het volgende of vorige nummer gaan. Door de knop langer vast te houden kunt u een nummer versneld afspelen. Door omhoog en omlaag te bewegen verhoogt of verlaagt u het volume. 2.6 FM Radio Uw Mp3 speler is geschikt om naar FM radio te luisteren. Druk kort op de menu knop om de radio functie in te schakelen. Duw de Menu knop naar links of rechts om een vorig of volgend station te kiezen. 2.7 Spraak opname Om spraak op te nemen dient u op de A-B/REC knop te drukken. Houd deze ingedrukt om het signaal op te nemen. Druk op de Play/Pause/Power knop om te stoppen. Indien u herhaaldelijk naar hetzelfde bestand wilt luisteren, drukt u éénmaal op de A-B knop tijdens afspelen om het begin te markeren. Druk nogmaals om het eindpunt te markeren. De MP3 speler zal het geselecteerde gedeelte herhaaldelijk afspelen. Tijdens het afspelen kunt u de A-B knop indrukken of een ander muziekbestand kiezen om het afspelen te beëindigen. 2.9 `Encoder' funktie In de opname functie heeft u keuze uit 3 opties; bron, `encoder' en kwaliteit. Beweeg de Menu knop naar links of rechts om de gewenste mogelijkheid te kiezen, druk vervolgens op de menu knop om de instellingen te wijzigen. Als u het menu wilt verlaten dient u de menu knop langere tijd ingedrukt te houden. In het `bron' menu kunt u kiezen uit: microfoon en FM. U kunt het formaat van de opname instellen op MP3 of WAV. De kwaliteit kan ingesteld worden op hoog, gemiddeld en laag. Een kwalitatief goede opname neemt meer ruimte in dan een kwalitatief mindere opname. 2.10 Taal instellingen Draai het menu om de gewenste taal in te stellen. Er is o.a. keuze uit Engels en Duits.