User manual KODAK C310

Kodak EasyShare C310/CD40 digital camera FPO User's guide www.kodak.com For interactive tutorials, www.kodak.com/go/howto For help with your camera, www.kodak.com/go/c310support or www.kodak.com/go/cd40support Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2005 All screen images are simulated. Kodak, EasyShare, and Retinar are trademarks of Eastman Kodak Company. P/N 4J4295_en Product features Front view 4 5 6 7 3 8 2 1 1 Grip 2 Strap post 3 Self Timer/Video light 4 Shutter button 5 Mode dial/Power 6 Flash unit 7 Viewfinder lens 8 Lens www.kodak.com/go/support i Product features Back view 6 5 4 3 7 8 9 10 11 12 13 14 2 1 16 15 1 Tripod socket 2 Dock connector 3 Share button 4 Controller buttons (4) 5 OK button 6 Delete button 7 Viewfinder 8 Ready light 9 Camera screen (LCD: liquid crystal display) 10 Flash/Status 11 Grip 12 Slot for optional SD/MMC card 13 Menu button 14 Review button 15 USB (Universal Serial Bus) port 16 Battery compartment button ii www.kodak.com/go/support Table of contents 1 1 Setting up your camera .........................................................................1 Attaching the wrist strap ............................................................................... 1 Loading the batteries .................................................................................... 1 Turning on the camera .................................................................................. 2 Setting the date/time, first time ..................................................................... 2 Setting the language and date/time, other times............................................ 3 Storing pictures on an SD or MMC card ......................................................... 3 2 Taking pictures and videos ....................................................................4 Taking a picture ............................................................................................ 4 Using digital zoom ........................................................................................ 6 Using the flash.............................................................................................. 7 Reviewing pictures and videos....................................................................... 7 Protecting pictures and videos from deletion................................................ 10 3 Transferring and printing pictures .......................................................12 Installing the software................................................................................. 12 Transferring pictures with the USB cable...................................................... 13 Printing pictures.......................................................................................... 14 Dock compatibility for your camera.............................................................. 17 4 Doing more with your camera .............................................................18 Putting yourself in the picture or video......................................................... 18 Running a slide show .................................................................................. 19 Copying pictures and videos ........................................................................ 20 Choosing a flash setting .............................................................................. 22 Changing picture-taking settings ................................................................. 23 Customizing your camera ............................................................................ 25 Viewing picture/video information ............................................................... 28 Pre-tagging for album names ...................................................................... 28 Sharing your pictures................................................................................... 31 www.kodak.com/go/support iii Table of contents 5 Troubleshooting ..................................................................................36 Camera problems........................................................................................ 36 Camera/computer communications.............................................................. 40 LCD screen messages .................................................................................. 41 Camera ready light status............................................................................ 44 6 Getting help ........................................................................................46 Helpful Web links........................................................................................ 46 Software help.............................................................................................. 46 Telephone customer support ....................................................................... 46 7 Appendix .............................................................................................49 Camera specifications ................................................................................. 49 Storage capacities ....................................................................................... 52 Power-saving features................................................................................. 53 Important safety instructions ....................................................................... 53 Battery information ..................................................................................... 55 Upgrading your software and firmware........................................................ 56 Additional care and maintenance ................................................................ 56 Warranty..................................................................................................... 57 Regulatory compliance ................................................................................ 59 iv www.kodak.com/go/support 1 Setting up your camera Attaching the wrist strap Loading the batteries CRV3 lithium (non-rechargeable) Ni-MH KAA2HR (rechargeable) 2-AA lithium, Ni-MH, or oxy-alkaline AA For information on replacing batteries and extending battery life, see page 55. www.kodak.com/go/support 1 Setting up your camera Turning on the camera Setting the date/time, first time At the prompt, press OK. to change. for previous/next field. OK to accept. 2 www.kodak.com/go/support Setting up your camera Setting the language and date/time, other times 1 2 3 Press Menu. to highlight Setup Menu then press OK. to highlight Language , then press OK. or Date/Time If setting the date/time: to change. OK for previous/next field. to accept. Storing pictures on an SD or MMC card Your camera has 16 MB of internal memory. You can purchase an SD or MMC card to conveniently store more pictures and videos. NOTE: We recommend Kodak SD and MMC cards. When using the card for the first time, format it in this camera before taking pictures (see page 27). SD or MMC card (optional) Notched corner CAUTION: A card can only be inserted one way; forcing it may cause damage. Inserting or removing a card when the Ready light is blinking may damage pictures, card, or camera. See page 52 for storage capacities. Purchase SD or MMC cards at a dealer of Kodak products or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories www.kodak.com/go/support 3 2 1 Taking pictures and videos Taking a picture 3 Press the Shutter button to take the picture. Ready light Turn on camera. 4 When the Ready light 2 Frame your subject in the viewfinder or LCD screen. blinks green, the picture is being saved; you can still take pictures. Taking a video 1 Turn on camera. 3 Press the Shutter button down and release, or press and hold for more than 2 seconds. The camera does not record audio. 2 Frame your subject in the viewfinder or LCD screen. To stop recording, press the Shutter button again. 4 www.kodak.com/go/support Taking pictures and videos Reviewing the picture or video just taken After you take a picture or video, the camera LCD screen displays a Quickview for approximately 5 seconds. While the picture or video and Delete are displayed: If you take no action, the picture/video is saved. OK to play/pause a video Tag a picture/video for email or as a favorite, or tag a picture for print. To view pictures and videos anytime, see page 7. Using the camera LCD screen as a viewfinder IMPORTANT: The Liveview feature significantly depletes battery power; use it sparingly. 1 Turn the Mode dial to any Still mode. 2 Press the OK button to turn on the camera screen. 3 Frame your subject in the camera screen. 4 Press the Shutter button to take the picture. 5 To turn off the LCD screen, press the OK button. OK button To make the LCD screen turn on whenever the camera is on, see Liveview, page 25 www.kodak.com/go/support 5 Taking pictures and videos Picture/video capture screens Self-timer Date stamp Flash Picture quality Pictures/video time remaining Image storage location Album name Mode description Zoom: Telephoto Wide Low battery Capture mode Exposure compensation Using digital zoom Use digital zoom in any Still mode to get up to 5X closer to your subject. IMPORTANT: You may notice a decrease in printed image quality when using digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm) print. 1 Press the OK button to turn on the LCD screen, then press to zoom in. The LCD screen displays the zoomed image and the zoom indicator. 2 Press Zoom indicator to zoom in and out. 3 Press the Shutter button to take the picture. To turn off digital zoom, from the lowest setting, press . NOTE: You cannot use digital zoom for video recording. Digital zoom is available only when Liveview is turned on. (See page 25.) 6 www.kodak.com/go/support Taking pictures and videos Using the flash Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows. Flash is effective between 2.6 - 7.9 ft (0.8 - 2.4 m). You can only change the flash setting in Still modes. Press the button repeatedly to scroll through flash options (see Flash modes table on page 22). The active flash icon is displayed in the LCD screen status area (see page 6). To change the flash settings, see page 22. Reviewing pictures and videos Press the Review button to view and work with your pictures and videos. Videos: OK to play/pause Rewind to beginning (during playback) Next picture/video (during playback) 1 2 (previous/next) Review (Press again to exit) To save battery power, use the optional Kodak EasyShare camera or printer dock. (See www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories.) NOTE: Pictures taken at 3.5 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with a black bar at the top of the screen. www.kodak.com/go/support 7 Taking pictures and videos What the review icons mean Print tag/number of prints Favorite tag Email tag Protect Picture/video number Image storage location Scroll arrows Review mode Video length Video number Image storage location Press OK to Play or Pause Review mode Scroll arrows 8 www.kodak.com/go/support Taking pictures and videos Magnifying a picture during review OK magnify at 2X. Press again for 4X. view other parts of the picture. OK return to 1X. Viewing multi-up (thumbnails) during review view multi-up thumbnails. view previous/next row of thumbnails. view previous/next thumbnail. OK view single picture. www.kodak.com/go/support 9 Taking pictures and videos Protecting pictures and videos from deletion 1 Press Review. 2 3 4 Note: To cancel Protect, press OK again. for previous/next. Press Menu. Press highlight Protect then press OK. to , The picture or video is protected and cannot be deleted. The Protect icon with the protected picture or video. Press the Menu button to exit. appears CAUTION: Formatting internal memory or an SD or MMC card deletes all (including protected) pictures, videos. (Formatting internal memory also deletes email addresses, album names, and favorites. To restore them, see EasyShare software Help.) 10 www.kodak.com/go/support Taking pictures and videos Deleting pictures and videos 1 Press Review. (To exit, press Review again.) 2 3 4 for previous/next. Press Delete. Follow the screen prompts. PICTURE or VIDEO--deletes the displayed picture or video. EXIT--exits the Delete screen. ALL--deletes all pictures and videos from your current storage location. NOTE: To delete protected pictures and videos, remove protection before deleting. www.kodak.com/go/support 11 3 Transferring and printing pictures CAUTION: Install Kodak EasyShare software before connecting the camera or optional dock to the computer. Failure to do so may cause the software to load incorrectly. Installing the software 1 Close all software applications that are open on your computer (including anti-virus software). 2 Place the Kodak EasyShare software CD into the CD-ROM drive. 3 Load the software: Windows OS--if the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. Mac OS X--double-click the CD icon on the desktop, then click the Install icon. 4 Follow the on-screen instructions to install the software. Windows OS--select Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install. Mac OS X--follow the on-screen instructions. NOTE: When prompted, register your camera and software. Registering lets you sign up for information that keeps your system up-to-date. To register later, visit www.kodak.com/go/register. 5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details. For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software. 12 www.kodak.com/go/support Transferring and printing pictures Transferring pictures with the USB cable 1 Turn off the camera. 2 Plug the labeled end of the USB cable (model U-8) into the labeled USB port on your computer. See your computer user's guide for details. 3 Plug the other end of the USB cable into the labeled USB port on the camera. 4 Turn on the camera. Kodak EasyShare software opens on your computer. The software prompts you through the transfer process. NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting. Also available for transferring You can also use these Kodak products to transfer your pictures and videos. I I Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 17) Kodak multi-card reader, Kodak SD multimedia card reader-writer Purchase these and other accessories at a dealer of Kodak products or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories www.kodak.com/go/support 13 Transferring and printing pictures Printing pictures Printing with a Kodak EasyShare printer dock Dock your camera to the Kodak EasyShare printer dock and print directly--with or without a computer. Purchase this and other accessories at a dealer of Kodak products or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories Direct printing with a PictBridge enabled printer Your camera is compatible with PictBridge technology, so you can print directly to PictBridge enabled printers. You need: I Camera with fully charged batteries, or I PictBridge enabled printer with optional Kodak 3-volt AC adapter I USB cable (may be sold separately) Connecting the camera to a PictBridge enabled printer 1 Turn off the camera and printer. 2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into the camera and into an electrical outlet. IMPORTANT: Do not use the AC adapter included with the EasyShare camera dock or printer dock to power your camera. 3 Connect the appropriate USB cable from the camera to the printer. (See your printer user guide or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories for details.) 14 www.kodak.com/go/support Transferring and printing pictures Printing from a PictBridge enabled printer 1 Turn on the printer. Turn on the camera. The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu interface turns off, press any button to redisplay it. 2 Press to choose a printing option, then press the OK button. to choose a picture. Choose the number of copies. Current Picture Press Tagged Pictures If your printer is capable, print pictures that you tagged for printing and choose a print size. Index Print All Pictures Image Storage Print thumbnails of all pictures. This option requires one or more sheets of paper. If the printer is capable, choose a print size. Print all pictures in internal memory, on a card, or in Favorites. Choose the number of copies. Access internal memory, a card, or Favorites. NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer. To transfer pictures to your computer, see page 12. In Favorites mode, the current favorite picture is displayed. www.kodak.com/go/support 15 Transferring and printing pictures Disconnecting the camera from a PictBridge enabled printer 1 Turn off the camera and printer. 2 Disconnect the USB cable from the camera and the printer. Using a printer that is not PictBridge enabled For details on printing pictures from your computer, click the Help button in the Kodak EasyShare software. Ordering prints online Kodak EasyShare Gallery (www.kodakgallery.com) is one of the many online print services offered in the Kodak EasyShare software. You can easily: I I I I Upload your pictures. Edit, enhance, and add borders to your pictures. Store pictures, and share them with family and friends. Order high-quality prints, photo greeting cards, frames, and albums--and have them delivered to your door. Printing from an optional SD or MMC card I I I Automatically print tagged pictures when you insert your card into a printer with an SD/MMC card slot. See your printer user's guide for details. Make prints at an SD/MMC card-capable Kodak picture maker. (Contact a location prior to visiting. See www.kodak.com/go/picturemaker.) Take the card to your local photo retailer for professional printing. 16 www.kodak.com/go/support Transferring and printing pictures Dock compatibility for your camera Kodak EasyShare dock I printer dock I printer dock plus I printer dock 6000 I camera dock 6000 Docking configuration Custom dock insert Kodak dock adapter kit D-22 Dock I others, including series 3 printer docks and camera docks Custom dock insert Dock I printer dock 4000 I camera dock II I LS420, LS443 camera dock Not compatible Purchase camera docks, printer docks, and other accessories at a dealer of Kodak products or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories www.kodak.com/go/support 17 4 Doing more with your camera Putting yourself in the picture or video The Self Timer creates a 10- or 2-second delay between the time you press the Shutter button and the time the picture or video is taken. 1 Turn the Mode dial to any Still mode for pictures, or to the Menu button. 2 Press to highlight Self Timer 3 Highlight 10 or 2 seconds, then press the OK button. 4 Press the Menu button to turn off the menu screen. The Self Timer icon and delay time appear in the status area. 5 Place the camera on a flat surface or use a tripod. 6 Compose the scene. Press the Shutter button, then move so that you are in the scene. If the Self Timer is set at 10 seconds, the Self Timer light blinks slowly for 8 seconds (then quickly for 2 seconds) before the picture or video is taken. If the Self Timer is set at 2 seconds, the light blinks for 2 seconds before the picture or video is taken. The Self Timer cancels after you take the picture, record the video, or turn off the camera. NOTE: The video stops when you press the Shutter button or when no storage space remains. for videos, then press , then press the OK button. 18 www.kodak.com/go/support Doing more with your camera Running a slide show Use the Slide Show to display your pictures and videos on the LCD screen. To run a slide show on a television or on any external device, see page 20. Starting the slide show 1 Press the Review button, then press the Menu button. 2 Press to highlight Slide Show , then press the OK button. 3 Press to highlight Begin Show, then press the OK button. Each picture and video is displayed once, in the order in which you took them. 4 To cancel the Slide Show, press the OK button. Changing the slide show display interval The default interval setting displays each picture for 5 seconds. You can set the display interval from 3 to 60 seconds. 1 On the Slide Show menu, press OK button. 2 Select a display interval. To scroll through the seconds quickly, press and hold 3 Press the OK button. The interval setting remains until you change it. . to highlight Interval, then press the www.kodak.com/go/support 19 Doing more with your camera Running a continuous slide show loop When you turn on Loop, the slide show is continuously repeated. 1 On the Slide Show menu, press to highlight Loop, then press the OK button. 2 Press to highlight On, then press the OK button. The slide show repeats until you press the OK button or until battery power is exhausted. This setting remains until you change it. Displaying pictures and videos on a television You can display pictures and videos on a television, computer monitor, or any device equipped with a video input using a compatible Kodak EasyShare printer dock and an optional audio/video cable (see the printer dock user's guide). Purchase these and other accessories at a dealer of Kodak products or at www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories Copying pictures and videos You can copy pictures and videos from a card to internal memory or from internal memory to a card. Before you copy, make sure that: I I A card is inserted in the camera. The camera's picture storage location is set to the location from which you are copying. See Image Storage, page 24. 20 www.kodak.com/go/support Doing more with your camera Copy pictures or videos: 1 Press the Review button, then press the Menu button. 2 Press 3 Press to highlight Copy to highlight an option. , then press the OK button. 4 Press the OK button. NOTE: Pictures and videos are copied, not moved. To remove pictures and videos from the original location after copying, delete them (see page 10). Tags that you applied for print, email, and favorites are not copied. Protection settings are not copied. To apply protection to a picture or video, see page 10. www.kodak.com/go/support 21 Doing more with your camera Choosing a flash setting Flash button Press the button repeatedly to scroll through flash options (see Flash modes table). The current flash mode is shown in the LCD status area. NOTE: I I Off and Fill flash options revert to Auto when the camera is turned off. When the picture is taken with Auto or Fill flash selected, the camera flashes twice: once to set the exposure and once to take the picture. Flash fires When the lighting conditions require it. Every time you take a picture, regardless of the lighting conditions. Use when the subject is in shadow or is "backlit" (when the sun is behind the subject). Flash modes Auto Flash Fill Red-eye Three times: once to set the exposure, once to reduce red-eye, and once to take the picture. Off Flash never fires. 22 www.kodak.com/go/support Doing more with your camera Changing picture-taking settings You can change settings to get the best results from your camera: 1 In any mode, press the Menu button. 2 Press to highlight the setting you wish to change, then press the OK button. 3 Choose an option, then press the OK button. 4 Press the Menu button to exit. Setting Self Timer Put yourself in the picture or video. Exposure Compensation (Still modes) Choose how much light enters the camera. This setting remains until you turn the Mode dial. Icon Options 10, 2 seconds, Off. See page 18. -2.0 to +2.0. If pictures are too dark, increase the value. If pictures are too light, decrease the value. www.kodak.com/go/support 23 Doing more with your camera Setting Picture Size (Still modes) Set picture resolution. This setting remains until you change it. Icon Options 4.0 MP (default)--for printing up to 20 x 30 in. (51 x 76 cm); pictures are highest resolution and largest file size. 3.5 MP (3:2 Best)--ideal for printing 4 x 6 in. (10 x 15 cm) prints without cropping. Also for printing up to 20 x 30 in. (51 x 76 cm); some cropping may result due to the 3:2 aspect ratio. 3.1 MP (Better)--for printing up to 11 x 14 in. (28 x 36 cm); pictures are medium resolution with smaller file size. 2.1 MP--for printing up to 8 x 10 in. (20 x 25 cm); pictures are medium resolution with smaller file size. 1.1 MP--for printing up to 5 x 7 in. (13 x 18 cm); for emailing, Internet, or screen display; pictures are lowest resolution and smallest file size. Color (default)--for color pictures. Black & White--for black-and-white pictures. Sepia--for pictures with a reddish-brown, antique look. Auto (default)--the camera uses the card if one is in the camera. If not, the camera uses internal memory. Internal Memory--the camera always uses internal memory, even if a card is installed. Color Mode (Still modes) Choose color tones. This setting remains until you turn the Mode dial. Image Storage Choose an image storage location. This setting remains until you change it. 24 www.kodak.com/go/support Doing more with your camera Setting Set Album Choose Album names. Icon Options On or Off. Pre-select album names before you take pictures or videos. Then, all the pictures or videos you take are tagged with those album names. See page 28. Video Length (Video mode) Choose the amount of recording time for videos. This setting remains until you change it. Continuous (default)-- as long as there is room on the card or internal memory, or until the Shutter button is pressed. 5, 15, or 30--seconds NOTE: If the current image storage location does not have adequate space, some video length options are not displayed. See page 52 for storage capacities. See Customizing your camera, page 25. Setup Menu Choose additional settings. Customizing your camera Use Setup to customize your camera settings. 1 In any mode, press the Menu button. 2 Press 3 Press to highlight Setup , then press the OK button. to highlight the setting you wish to change, then press the OK button. 4 Choose an option, then press the OK button. www.kodak.com/go/support 25 Doing more with your camera 5 Press the Menu button to exit. Setting Return Return to previous menu. Liveview Change the LCD screen setting so that it is always on or always off (see page 26). This setting remains until you change it. Auto Power Off Select when you would like the camera to turn off. Date & Time Set the date and time. This setting remains until you change it. Video Out Choose the regional setting that lets you connect the camera to a television or other external device (see page 20). This setting remains until you change it. Date Stamp (Still modes) Imprint the date on pictures. This setting remains until you change it. On or Off. Icon Options 3 minutes (default) 1, 3, 5, or 10 minutes See page 3. NTSC (default)--used in most countries except those in Europe and China. North America and Japan use NTSC. PAL--used in Europe and China. Turn the Date Stamp on or off, or change the date stamp format. 26 www.kodak.com/go/support Doing more with your camera Setting Video Date Display (Video mode) Display capture date and time before the video starts. This setting remains until you change it. Language Display the camera screen text in different languages. This setting remains until you change it. Format Format camera memory. Icon Options Choose None, or choose a date and time format. See page 3. CAUTION: Formatting deletes all pictures and videos, including those that are protected. Removing a card during formatting may damage the card. About View camera and firmware information. Memory Card--deletes everything on the card; formats the card. Cancel--exits without making a change. Internal Memory--deletes everything in internal memory including email addresses, album names, and Favorites: formats the internal memory. www.kodak.com/go/support 27 Doing more with your camera Viewing picture/video information 1 Press the Review button, then press the Menu button. 2 Press to highlight Picture or Video Info, then press the OK button. . 3 To view information on the next or previous picture or video, press 4 Press the Menu button to exit. Changing optional review settings In Review mode, press the Menu button to access optional review settings. Magnify (pictures) (page 10) Album (page 28) Slide Show (page 19) Multi-up (page 10) Copy (page 20) Protect (page 11) Image Storage (page 24) Picture/Video Information (page 28) Setup Menu (page 25) Pre-tagging for album names Use the Set Album (Still or Video) feature to pre-select album names before you take pictures or videos. Then, all the pictures or videos you take are tagged with those album names. First--on your computer Use Kodak EasyShare software to create album names on your computer. Then copy up to 32 album names to the album name list on your camera the next time you connect the camera to the computer. See Kodak EasyShare software Help for details. 28 www.kodak.com/go/support Doing more with your camera Second--on your camera 1 In any mode, press the Menu button. 2 Press to highlight Set Album , then press the OK button. 3 Press to highlight an album name, then press the OK button. Repeat to mark pictures or videos for albums. Selected albums are noted with a check mark. 4 To remove a selection, highlight an album name and press the OK button. To remove all album selections, select Clear All. 5 Highlight Exit, then press the OK button. Your selections are saved. If you turn on the LCD screen, your album selection is displayed on the screen. A plus (+) after the album name means more than one album is selected. 6 Press the Menu button to exit. This setting remains until you change it. Third--transfer to your computer When you transfer the tagged pictures and videos to your computer, Kodak EasyShare software opens and categorizes your pictures and videos in the appropriate album. See the Kodak EasyShare software Help for details. Tagging pictures/videos for albums Use the Album feature in Review mode to tag the pictures and videos in your camera with album names. First--on your computer Use Kodak EasyShare software to create album names on your computer, then copy up to 32 album names to the camera's internal memory. See Kodak EasyShare software Help for details. Second--on your camera www.kodak.com/go/support 29 Doing more with your camera 1 Press the Review button. 2 Press 3 Press to locate a picture, then press the Menu button. to highlight Album , then press the OK button. 4 Highlight an album, then press the OK button. The album name appears with the picture. A plus (+) after the album name means the picture was added to more than one album. To add other pictures to the same album, press to scroll through the pictures. When the picture you want is displayed, press the OK button. To add the pictures to more than one album, repeat step 4 for each album. 5 To remove a selection, highlight an album name, then press the OK button. To remove all album selections, select Clear All. 6 Highlight Exit, then press the OK button. Your selections are saved. 1 Press the Menu button to return to Review mode. Third--transfer to your computer When you transfer the tagged pictures and videos to your computer, Kodak EasyShare software opens and categorizes your pictures and videos in the appropriate album. See Kodak EasyShare software Help for details. 30 www.kodak.com/go/support Doing more with your camera Sharing your pictures Press the Share button to tag your pictures and videos. When they are transferred to your computer, you can share using: Pictures Print (page 16) Videos Email (page 33) Favorites (page 33), for easy organization on your computer and for sharing on your camera NOTE: Tags remain until removed. If a tagged picture or video is copied, the tag is not copied. Tagging pictures for printing 1 Press the Share button. 2 Press 3 Press to locate a picture. to highlight Print , then press the OK button.* 4 Press to select the number of copies (0 - 99). The default is one. Zero removes the tag for that picture.** The Print icon appears in the status area. 5 Press the OK button. www.kodak.com/go/support 31 Doing more with your camera 6 Press the Share button to exit. * To tag all pictures in the image storage location, highlight Print All , press the OK button, then select the number of copies as described above. Print All is not available in Quickview. **To remove the print tagging for all pictures in the image storage location, highlight Cancel Prts , then press the OK button. You cannot cancel prints in Quickview. Printing tagged pictures When you transfer the tagged pictures to your computer, the Kodak EasyShare software print screen opens. For details, click the Help button in the Kodak EasyShare software. For more information on printing from your computer or card, see page 32. NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to 3.5MP (3:2) print quality setting. See page 24. Tagging pictures and videos for emailing First--on your computer Use Kodak EasyShare software to create an email address book on your computer. Then, copy up to 32 email addresses to the camera's internal memory. Second--tag pictures/videos on your camera 1 Press the Share button. Press 2 Highlight Email to locate a picture/video. , then press the OK button. 3 Highlight an email address, then press the OK button. To tag other pictures/videos with the same address, press to scroll through the pictures. When the picture or video you want is displayed, press the OK button. To send the pictures/videos to more than one address, repeat step 2 for each address. Selected addresses are checked. 32 www.kodak.com/go/support Doing more with your camera 4 To remove a selection, highlight a checked address and press the OK button. To remove all email selections, highlight Clear All. 5 Highlight Exit, then press the OK button. Your selections are saved. The Email icon 6 Press the Share button to exit. Third--transfer and email When you transfer the tagged pictures/videos to your computer, the Email screen opens and lets you send them to the addresses you specified. For details, click the Help button in the Kodak EasyShare software. appears in the status area. Tagging pictures as favorites You can preserve your favorite pictures in the Favorites section of your camera's internal memory, then share them with friends and family. NOTE: When you transfer pictures from your camera to your computer, all pictures (including favorites) are stored on your computer at full size. Favorite pictures--smaller copies of your originals--are loaded back to your camera, so you can share and enjoy more. Share your favorite pictures in 4 easy steps: 1. Take pictures 2. Tag pictures as 1 Press the Share button. Press favorites 2 Press to highlight Favorite to locate a picture. , then press the OK button. The Favorite icon appears in the status area. To remove the tag, press the OK button again. Press the Share button to exit the menu. www.kodak.com/go/support 33 Doing more with your camera 3. Transfer pictures to your computer 1 To enjoy full functionality, install and use the EasyShare software that was packaged with this camera. (See page 12.) 2 Connect the camera to the computer using the USB cable (see page 13) or an EasyShare dock. The first time you transfer pictures, the software helps you make choices about your favorite pictures. Then, your pictures are transferred to the computer. Favorite pictures (smaller versions of the originals) are loaded to the Favorites section of your camera's internal memory. 4. View favorites on your camera 1 Turn the Mode dial to Favorites . 2 Press to scroll through favorites. To exit Favorites mode, turn the Mode dial to any other position. NOTE: The camera holds a limited number of favorites. Use Camera Favorites in the EasyShare software to customize the size of your camera Favorites section. Videos tagged as favorites remain in the Favorites folder in the EasyShare software. For more details, click the Help button in the Kodak EasyShare software. Optional settings In Favorites mode, press the Menu button to access optional settings. Slide Show (page 19) Multi-up (page 9) Picture Information (page 28) Remove all favorites (page 35) Setup Menu (page 25) NOTE: Pictures taken at the 3.5 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with a black bar at the top of the screen. (See Picture Size (Still modes), page 24.) 34 www.kodak.com/go/support Doing more with your camera Removing all favorites from your camera 1 Turn the Mode dial to Favorites 2 Press the Menu button. 3 Highlight , then press the OK button. All pictures stored in the Favorites section of internal memory are removed. Favorites are restored the next time you transfer pictures to the computer. 4 Press the Menu button to exit the menu. Preventing favorites from transferring to the camera 1 Open the Kodak EasyShare software. Click the My Collection tab. 2 Go to the Albums view. 3 Click the Camera Favorites Album for your camera. 4 Click Remove Album. The next time you transfer pictures from your camera to the computer, use the Camera Favorites Wizard/Assistant in the Kodak EasyShare software to either recreate your Camera Favorites Album or to turn off the Camera Favorites feature. Printing and emailing favorites 1 Turn the Mode dial to Favorites 2 Press the Share button. 3 Highlight Print or Email , then press the OK button. NOTE: Favorites that were taken on this camera (not imported from another source) are good for prints up to 4 x 6 in. (10 x 15 cm). . Press to locate a picture. . www.kodak.com/go/support 35 5 Troubleshooting For step-by-step product support, visit www.kodak.com/go/c310support or www.kodak.com/go/cd40support and select Interactive Troubleshooting & Repairs. Camera problems Problem Camera does not turn on. Camera does not turn off. Cause Batteries are not installed correctly. Camera has locked up. Solution Install new batteries (page 1) or charge rechargeable batteries. Remove the battery, then reinsert or replace it. If the camera still does not function, contact Customer Support (page 46). Pictures remaining number does not decrease after taking a picture. Picture does not take up The camera is operating normally. enough space to Continue taking pictures. decrease the number. Short battery life Dirt or oxidation on the with Kodak Ni-MH battery contacts. rechargeable digital camera batteries. Stored pictures are corrupted. Wipe the contacts with a clean, dry cloth (page 55) before loading batteries in the camera. Card was removed or the Retake picture. Do not remove card batteries expired while while the ready light is blinking. Keep the ready light was rechargeable batteries charged. blinking. 36 www.kodak.com/go/support Troubleshooting Problem Cause Solution In Review mode, Camera may not be Check the image storage location you do not see a accessing the correct setting (page 24). picture (or the image storage location. expected picture) on the LCD screen. In Review mode, a File format is blue or black screen unrecognized. is displayed instead of a picture. Shutter button does Camera is not turned on. not work. Camera is processing a picture; the ready light (near the viewfinder) is blinking red. Transfer the picture to the computer (page 13). Turn on the camera (page 2). Wait until the ready light stops blinking red before attempting to take another picture. Card or internal memory Transfer pictures to the computer is full. (page 13), delete pictures from the camera (page 11), switch image storage locations (page 24), or insert a card with available memory (page 3). Shutter button was not pressed. Slide show does not Video Out setting is run on external incorrect. video device. External device is set incorrectly. For best pictures, see page 4. Adjust the camera Video Out setting (NTSC or PAL, page 26). See the external device's user's guide. www.kodak.com/go/support 37 Troubleshooting Problem Cause Solution Picture is too light. Subject was too close for Move so there is at least 2.6 ft (0.8 m) flash. between camera and subject. Too much light. Picture is not clear. Lens is dirty. Subject too close when taking picture. Decrease Exposure Compensation (page 23). Clean the lens (page 56). Move so there is at least 2.6 ft (0.8 m) between the camera and the subject. Subject or the camera Place the camera on a flat, steady moved while the picture surface or use a tripod. was taken. Picture is too dark. Flash is not on. Subject is too far away for the flash to be effective. Subject is in front of a bright light (backlit). Not enough light. Camera does not Card may not be recognize SD/MMC SD/MMC certified. card. Card may be corrupt. Turn on the flash (page 7). Move so there is no more than 7.9 ft (2.4 m) between the camera and the subject. Use Fill flash (page 22) or change your position so light is not behind the subject. Increase Exposure Compensation (page 23). Purchase a certified SD/MMC card. Reformat the card (page 27). Caution: Formatting a card deletes all pictures and videos, including protected files. Insert a card into the slot, then push to seat (page 3). Card is not properly inserted in camera. 38 www.kodak.com/go/support Troubleshooting Problem Camera freezes up when a card is inserted or removed. Memory card full. Cause Solution Camera detected an Turn the camera off, then back on. error when the card was Make sure the camera is turned off inserted or removed. before inserting or removing a card. Storage is full. Insert a new card (page 3), transfer pictures to the computer (page 13), or delete pictures (page 11). Maximum number of files Transfer pictures to the computer or folders is reached (or (page 13), then format the card or other directory concern). internal memory (page 27). Caution: Formatting a card deletes all pictures and videos, including protected files. www.kodak.com/go/support 39 Troubleshooting Camera/computer communications Problem Cause Solution See this file on the EasyShare software CD: USB.html Or, visit www.kodak.com/go/ camerasupport Turn on the camera (page 2). The computer There is a problem with does not the configuration of the communicate USB port on the computer. with the camera. Camera power is off. Batteries are exhausted or Install new batteries (page 1) or are not charged. charge rechargeable batteries. Some Advanced Power Management utilities on laptops turn off ports to save battery life. See the Power Management section of the laptop user's guide to disable this feature. USB cable is not securely Connect cable to camera and connected. computer port (page 13). Software is not installed. Software is installed incorrectly. Install the software (page 12). Disconnect the USB cable. Close all open applications. Re-install the software (page 12). Too many applications are Disconnect camera from the computer. running on the computer. Close all software applications, reconnect camera. The Battery Monitor or similar software runs constantly. Close that software before starting the Kodak software. 40 www.kodak.com/go/support Troubleshooting Problem Cause Solution Disconnect USB cable. (If using camera dock or printer dock, disconnect cable and remove camera from dock). Close all open applications. Re-install the software (page 12). Disconnect the USB cable. Close all open applications. Re-install the software (page 12). Cannot transfer Software is not installed. pictures. (The Add New Hardware Wizard cannot locate drivers.) Software is installed incorrectly. LCD screen messages Message Cause Solution No images to display There are no pictures in Change image storage location the current image storage setting (page 24). location. Memory card requires Card is corrupted or formatting formatted for another digital camera. Memory card cannot be read (Please format memory card or insert another card) Insert a new card (page 3) or format the card (page 27). Caution: Formatting a card deletes all pictures and videos, including protected files. Only one USB USB cable is connected to Unplug the USB cable from the connection allowed. camera while docked. camera. Disconnect cable or rem. (remove) camera from dock. www.kodak.com/go/support 41 Troubleshooting Message Internal memory requires formatting Internal memory cannot be read (Please format internal memory) Cause Camera internal memory is corrupted. Solution Format the internal memory (page 27). Caution: Formatting deletes all pictures and videos, including protected files. (Formatting internal memory also deletes email addresses, album names, and Favorites. To restore them, see the Kodak EasyShare software Help.) No memory card (Files There is no card in the Insert a card (page 3). not copied) camera. Pictures were not copied. Not enough space to There is not enough space copy files (Files not in the image storage copied) location you are copying to (internal memory or the card). Memory card is locked Card is write-protected. (Insert new memory card) Read-only memory card. Remove write protection to capture or write to card. Delete pictures from the image storage location you are copying to (page 11), or insert a new card (page 3). Insert a new card (page 3), move the switch on the card to unlock the card, or change the image storage location to internal memory (page 24). 42 www.kodak.com/go/support Troubleshooting Message Cause Solution Memory card is Card is slow, corrupted, or Insert a new card (page 3) or unusable (Insert new unreadable. format the card (page 27). memory card) Caution: Formatting a card deletes all pictures and videos, including protected files. Date and time have been reset This is the first time you Reset the clock (page 3). turned on the camera; or the batteries have been removed for an extended period of time; or the batteries are exhausted. No address book on No Email addresses Create and copy address book from camera (Connect with appear because there is no computer. See the Kodak computer to import address book. EasyShare software Help. address book) No album names on Album names have not Create and copy album names from camera (Connect with been copied to the camera computer. See the Kodak computer to import from the computer. EasyShare software Help. album names) Can only mark image with 32 album names. Only the first 32 album names will be saved The maximum number of Delete one or more album names album names (32) have associated with the image been associated with an (page 29). image. NOTE: Albums previously associated with an image persist even though they may not be contained in current album file on camera. www.kodak.com/go/support 43 Troubleshooting Message Cause Solution Leave the camera off until it's cool to the touch, then turn it back on. If the message reappears, contact Customer Support (page 46). High camera Internal temperature of temperature. (Camera the camera is too high for will be turned off.) the camera to operate. The viewfinder light glows red and the camera turns off. Unrecognized file format Camera cannot read the picture format. Transfer the picture to the computer (page 13), or delete it (page 11). Turn the Mode dial off, then back on. If the message reappears, contact Customer Support (page 46). Camera error #XXXX. An error is detected. See user's guide.