User manual KONICA MINOLTA 7033 EV5

INSTRUCTION MANUAL 7033 INSTRUCTION MANUAL 7033 Before copying, read this guide. Keep in the right hand rear pocket of the machine. Thank you very much for your purchase of the Konica 7033. This Manual deals with making copies, correct handling of the machine, and precautions for safety. Please read before copying. In order to maintain a satisfactory copying performance, please keep this Manual readily available for reference in the right hand rear pocket of the machine. ENERGY STAR® Program The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. As an ENERGY STAR Partner, Konica Minolta Business Technologies, INC. has determined that this product meets the ENERGY STAR guidelines for energy efficiency grounding it on the following features. Auto Low Power This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto Low Power operates automatically when 15 minutes have elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time. The time period for the Auto Low Power function can be set for 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes. See p. 5-2 for details. Automatic Shut-Off This function achieves further energy conservation by partially turning OFF the power supply, thereby reducing energy consumption to 80W or less. In the standard setting, Automatic Shut-Off follows Auto Low Power, operating automatically when 60 minutes have elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time. The time period for the Automatic Shut-Off function can be set for 30 minutes, 60 minutes, 90 minutes, 120 minutes or 240 minutes. See p. 5-3 for details. Automatic Duplex Copying To reduce paper consumption, use this function to make double-sided (duplex) copies, automatically. We recommend that you utilize the Auto Low Power function, the Automatic Shut-Off function, and the Automatic Duplex Copying function. Precaution for Installation and Use CONTENTS Paper Supply Toner Supply Component Locations LCD Section 1 : Precautions for Installation and Use 1. Caution Labels and Indicator -----------------------------------------------------2. Danger, Warning and Caution Symbols ---------------------------------------3. Requirements for Safe Use -------------------------------------------------------Power Source --------------------------------------------------------------------Environment -----------------------------------------------------------------------Precautions for Routine Handling--------------------------------------------1-2 1-3 1-4 1-4 1-5 1-7 Power Saver EKC Weekly Timer Periodic/Daily Maintenance Basic Screen Basic Operation Copy Mode Copy Density Magnification Paper Size Automatic Settings Rotation Store Mode Reserve/ Job List Image Quality CHECK Button HELP Button JOB MEMORY Button INTERRUPT Button Multi-sheet Bypass Tray Application Selection Screen Sheet/Cover Insertion Chapter Combination Booklet OHP Interleave Image Insert Dual Page Mixed Original Text/Photo Enhance Reverse Image Repeat Frame/Fold Erasure Auto Layout Thin/Thick Paper Image Shift Non Image Area Erase Finisher Output Mode on Exit Tray Key Operator Mode Service Call Memory Overflow Paper Jam Power OFF/ON Screen Simple Problems Specifications/ Others Section 2 : Preparation for Use 1. Paper Supply -------------------------------------------------------------------------- 2-2 Paper Out Indication ------------------------------------------------------------- 2-2 Loading Paper --------------------------------------------------------------------- 2-5 2. Toner Supply -------------------------------------------------------------------------- 2-7 Toner Supply Indication --------------------------------------------------------- 2-7 Preparation ------------------------------------------------------------------------- 2-8 Adding Toner ---------------------------------------------------------------------- 2-8 Section 3 : Component Locations 1. Main Body ----------------------------------------------------------------------------- 3-2 External ----------------------------------------------------------------------------- 3-2 Internal ------------------------------------------------------------------------------ 3-4 2. Operational Panel -------------------------------------------------------------------- 3-5 3. Finisher --------------------------------------------------------------------------------- 3-6 Section 4 : LCD Operation 1. Screen Types ------------------------------------------------------------------------- 4-2 2. Basic Screen -------------------------------------------------------------------------- 4-3 Wake-Up and Basic Screen ---------------------------------------------------- 4-3 Basic Screen: Layer Selection Screen (Full-Automatic Mode Screen) ----- 4-4 Basic Screen: Direct Selection Screen --------------------------------------------- 4-5 3. Application Selection Screen ------------------------------------------------------ 4-6 4. Other Screens ------------------------------------------------------------------------ 4-7 Check Screen --------------------------------------------------------------------- 4-7 Help Screen ------------------------------------------------------------------------ 4-7 Screens for Setting Job Memory ---------------------------------------------- 4-8 Service Call Screen -------------------------------------------------------------- 4-8 Paper Jam Position and Paper Jam Processing Screens -------------- 4-9 Power OFF/ON Screen --------------------------------------------------------- 4-9 Key Operator Mode Screens ------------------------------------------------- 4-10 Section 5 : Copier Management 1. Power Saver -------------------------------------------------------------------------- 5-2 Auto Low Power ------------------------------------------------------------------ 5-2 Manual Shut-Off------------------------------------------------------------------- 5-3 Automatic Shut-Off --------------------------------------------------------------- 5-3 2. Electronic Key Counter (EKC) ---------------------------------------------------- 5-4 EKC Functions -------------------------------------------------------------------- 5-4 EKC Procedure-------------------------------------------------------------------- 5-4 3. Weekly Timer ------------------------------------------------------------------------- 5-5 Timer Interrupt --------------------------------------------------------------------- 5-5 4. Periodic Maintenance --------------------------------------------------------------- 5-7 How to Read the PM Count ---------------------------------------------------- 5-7 5. Daily Maintenance ------------------------------------------------------------------- 5-8 Clean the Platen Glass ---------------------------------------------------------- 5-8 Clean the Left Partition Glass ------------------------------------------------- 5-8 Clean the RADF Platen Guide Cover ---------------------------------------- 5-8 i CONTENTS (continued) Section 6 : Basic Copying on Basic Screen 1. Basic Screen -------------------------------------------------------------------------- 6-2 2. Basic Operation for Copying ------------------------------------------------------ 6-4 3. Copy Mode ---------------------------------------------------------------------------6-11 1s2 Copying ---------------------------------------------------------------------6-11 2s2 Copying ---------------------------------------------------------------------6-14 2s1 Copying ---------------------------------------------------------------------6-17 1s2 Copying by Using the Platen Glass ---------------------------------- 6-20 4. Copy Density -------------------------------------------------------------------------6-24 AE (Automatic Exposure) ------------------------------------------------------ 6-24 Manual Density Adjustment --------------------------------------------------- 6-25 Density Shift-----------------------------------------------------------------------6-26 5. Magnification -------------------------------------------------------------------------6-28 Preset/Userset --------------------------------------------------------------------6-28 Zoom --------------------------------------------------------------------------------6-29 Vertical/ Horizontal Zoom ------------------------------------------------------ 6-30 6. Paper Size Selection ---------------------------------------------------------------6-33 7. Automatic Settings ------------------------------------------------------------------6-34 ATS (Automatic Tray Switching) --------------------------------------------- 6-34 APS (Automatic Paper Size Selection) ------------------------------------- 6-34 AMS (Automatic Magnification Selection) --------------------------------- 6-35 Auto Reset ------------------------------------------------------------------------6-35 AE (Automatic Exposure) ------------------------------------------------------ 6-35 8. Rotation -------------------------------------------------------------------------------6-36 Rotation and APS ---------------------------------------------------------------6-36 Rotation and AMS ---------------------------------------------------------------6-37 To Release Automatic Rotation ---------------------------------------------- 6-38 Section 7 : Other Basic Functions 1. Store Mode ---------------------------------------------------------------------------- 7-2 Platen Store Mode---------------------------------------------------------------- 7-4 RADF Store Mode ---------------------------------------------------------------- 7-8 2. Reserve Mode and Job List ------------------------------------------------------ 7-11 Reserve Job Setting ------------------------------------------------------------7-12 Job List Screen -------------------------------------------------------------------7-14 Troubleshooting in Reserve Setting ----------------------------------------- 7-15 3. Image Quality ------------------------------------------------------------------------7-17 High Mode -------------------------------------------------------------------------7-17 Very High Mode ------------------------------------------------------------------7-20 4. CHECK Button -----------------------------------------------------------------------7-22 Check Screen and How to Make a Proof Copy -------------------------- 7-22 How to View the Check Screen ---------------------------------------------- 7-26 5. HELP Button -------------------------------------------------------------------------7-28 Help Basic Screen ---------------------------------------------------------------7-28 Help Screens for the Output Modes ---------------------------------------- 7-30 Help Screens for the Job Memory ------------------------------------------- 7-30 Help Screen for the Paper Jam Position Screen------------------------- 7-30 Help Screens for Manual Setting on the Basic Screen ----------------- 7-30 Help Screens for the Application Selection Screen --------------------- 7-30 6. JOB MEMORY Button -------------------------------------------------------------7-33 JOB STORE ----------------------------------------------------------------------7-33 JOB RECALL ---------------------------------------------------------------------7-35 7. INTERRUPT Button ----------------------------------------------------------------7-36 8. Multi-Sheet Bypass Tray ---------------------------------------------------------- 7-39 ii Precaution for Installation and Use CONTENTS (continued) Paper Supply Toner Supply Component Locations LCD Power Saver EKC Weekly Timer Periodic/Daily Maintenance Basic Screen Basic Operation Copy Mode Copy Density Magnification Paper Size Automatic Settings Rotation Store Mode Reserve/ Job List Image Quality CHECK Button HELP Button JOB MEMORY Button INTERRUPT Button Multi-sheet Bypass Tray Application Selection Screen Sheet/Cover Insertion Chapter Combination Booklet OHP Interleave Image Insert Dual Page Mixed Original Text/Photo Enhance Reverse Image Repeat Frame/Fold Erasure Auto Layout Thin/Thick Paper Image Shift Non Image Area Erase Finisher Output Mode on Exit Tray Key Operator Mode Service Call Memory Overflow Paper Jam Power OFF/ON Screen Simple Problems Specifications/ Others Section 8 : Special Copying: Page Editing 1. Application Selection Screen ------------------------------------------------------ 8-2 2. Sheet/Cover Insertion --------------------------------------------------------------- 8-4 3. Chapter --------------------------------------------------------------------------------8-14 4. Combination --------------------------------------------------------------------------8-19 5. Booklet ---------------------------------------------------------------------------------8-24 6. OHP Interleave ----------------------------------------------------------------------8-29 7. Image Insert --------------------------------------------------------------------------8-33 8. Dual Page -----------------------------------------------------------------------------8-39 9. Mixed Original------------------------------------------------------------------------ 8-44 Section 9: Special Copying: Copy Image 1. Text/Photo Enhance ----------------------------------------------------------------- 9-2 2. Reverse Image ----------------------------------------------------------------------- 9-6 3. Repeat ---------------------------------------------------------------------------------9-10 4. Frame/Fold Erasure ---------------------------------------------------------------- 9-15 5. Auto Layout --------------------------------------------------------------------------- 9-19 6. Thin/Thick Paper Mode ------------------------------------------------------------ 9-23 7. Image Shift --------------------------------------------------------------------------- 9-27 8. Non Image Area Erase ------------------------------------------------------------ 9-36 Section 10 : Output Mode 1. Finisher Specifications ------------------------------------------------------------- 10-2 Non-Sort Mode ------------------------------------------------------------------- 10-3 Sort Mode -------------------------------------------------------------------------10-5 Group Mode ----------------------------------------------------------------------- 10-7 Staple-Sort Mode ---------------------------------------------------------------- 10-9 Face Up Mode ------------------------------------------------------------------ 10-12 2. Inserting a New Staple Cartridge---------------------------------------------- 10-14 3. Output Mode for Machine without Finisher --------------------------------- 10-16 Normal Exit ---------------------------------------------------------------------- 10-18 E-Sort Exit ----------------------------------------------------------------------- 10-19 Face Up Exit -------------------------------------------------------------------- 10-21 Section 11 : Key Operator Mode 1. Key Operator Function -------------------------------------------------------------11-2 How to Access the Key Operator Mode------------------------------------ 11-3 Function Menu Map -------------------------------------------------------------11-4 2. System Initial [1] ---------------------------------------------------------------------11-6 Time [1] ----------------------------------------------------------------------------11-6 Language [2] ----------------------------------------------------------------------11-7 3. Copier Initial [2] ----------------------------------------------------------------------11-8 Copy Mode [1] -------------------------------------------------------------------- 11-9 Density [2] ----------------------------------------------------------------------- 11-10 Magnification [3] ---------------------------------------------------------------- 11-11 Tray [4] --------------------------------------------------------------------------- 11-12 Output [5] ------------------------------------------------------------------------ 11-13 Image Quality [6] --------------------------------------------------------------- 11-15 4. Preset Key [3] ---------------------------------------------------------------------- 11-16 Density [1] ----------------------------------------------------------------------- 11-16 Magnification [2] ---------------------------------------------------------------- 11-18 iii CONTENTS (continued) 5. EKC (Electronic Key Counter) [4] --------------------------------------------- 11-19 How to Access the EKC Setting Mode ----------------------------------- 11-20 Change EKC Data [1] -------------------------------------------------------- 11-21 EKC Data List [2] -------------------------------------------------------------- 11-23 All Counter Reset [3] ---------------------------------------------------------- 11-25 EKC On/Off Setting [4] ------------------------------------------------------- 11-26 Copy Limit Reached Effect [5] ---------------------------------------------- 11-27 6. Lock Job Memory [5] ------------------------------------------------------------- 11-28 7. Paper Type [6] --------------------------------------------------------------------- 11-29 8. Panel Contrast [7] ----------------------------------------------------------------- 11-30 9. Key Operator Data [8]------------------------------------------------------------ 11-31 10. Weekly Timer [9]----------------------------------------------------------------- 11-32 How to Access the Weekly Timer Setting Mode ----------------------- 11-33 Weekly Timer Setting [1] ----------------------------------------------------- 11-34 Weekly Timer Copier ON/OFF Time Set [2] ---------------------------- 11-35 Machine Working Day Individual Set [3] --------------------------------- 11-37 Lunch Hour Off Function [4] ------------------------------------------------- 11-39 Password Setting [5] ---------------------------------------------------------- 11-40 11. Touch Panel Adjustment [10] ------------------------------------------------- 11-41 12. Paper Size [11] ------------------------------------------------------------------ 11-42 13. Power Save [12] ----------------------------------------------------------------- 11-43 14. Memory Switch [13] ------------------------------------------------------------- 11-45 15. List Print [14] --------------------------------------------------------------------- 11-49 16. KRDS Host [15] ------------------------------------------------------------------ 11-50 Section 12 : Troubleshooting 1. Service Call ---------------------------------------------------------------------------12-2 Limited Use of the Copier in Trouble --------------------------------------- 12-3 2. Memory Overflow -------------------------------------------------------------------12-4 Copy Conditions Using Memory --------------------------------------------- 12-4 Action 1 ----------------------------------------------------------------------------12-5 Action 2 ----------------------------------------------------------------------------12-5 3. Paper Jam Processing -------------------------------------------------------------12-6 Jam in Current Job -------------------------------------------------------------- 12-6 Jam in Reserve Job -------------------------------------------------------------12-7 Paper Jam Position Screen --------------------------------------------------- 12-8 Paper Jam Processing Screen ----------------------------------------------- 12-8 4. Power OFF/ON Screen ---------------------------------------------------------- 12-10 5. Simple Problems ------------------------------------------------------------------ 12-11 Section 13 : Others 1. Main Body Specifications ---------------------------------------------------------13-2 Main body -------------------------------------------------------------------------13-2 RADF (DF-311) ------------------------------------------------------------------13-3 2. Option Specifications ---------------------------------------------------------------13-4 FS-105 In-Bin Stapler Finisher ----------------------------------------------- 13-4 Drawer Base Unit (DB-208) --------------------------------------------------- 13-4 Drawer Base Unit (DB-208A) ------------------------------------------------- 13-4 Drawer Base Unit (DB-608) --------------------------------------------------- 13-4 Memory Unit ----------------------------------------------------------------------13-5 Key Counter -----------------------------------------------------------------------13-5 3. Copy Materials -----------------------------------------------------------------------13-6 Maintenance Kit (80,000 copies) (except for the United Kingdom) -- 13-6 iv Section 1 : Precautions for Installation and Use 1. Caution Labels and Indicator 2. Danger, Warning and Caution Symbols 3. Requirements for Safe Use Power Source Environment Precautions for Routine Handling Section 1 : Precautions for Installation and Use 1. Caution Labels and Indicator 1. Caution Labels and Indicator The caution labels and indicator are attached to the machine areas, as shown below, where you are advised to pay special attention to avoid any dangerous situations or serious injury. CAUTION: CAUTION High temperature! To avoid getting burned USE CARE when clearing paper. This internal area is very hot. To avoid getting burned DO NOT TOUCH. Main body CAUTION: This area generates high voltage. To avoid an electrical shock DO NOT TOUCH. CAUTION: CAUTION High temperature! To avoid getting burned USE CARE when clearing paper. This internal area is very hot. To avoid getting burned DO NOT TOUCH. Finisher FS-105 CAUTION: CAUTION: DO NOT INSERT your finger into the two staple driving portions or into the grooves of the paper exit lever, otherwise you may be injured. DO NOT PUT your hands beneath or above the middle exit tray of the Finisher when it is moving, otherwise you may be injured. CAUTION If you touch any place which you are advised by any caution label or caution indicator to keep yourself away from, you may be burned or injured. Do not remove caution labels or indicators. If any caution label or caution indicator is soiled, please clean to make legible. If you cannot make them legible, or if the caution label or indicator is damaged, please contact your Service Centre. 1-2 Precaution for Installation and Use Section 1 : Precautions for Installation and Use 2. Danger, Warning and Caution Symbols 2. Danger, Warning and Caution Symbols The following indicators are used on the caution labels or in this manual to categorize the level of safety cautions. DANGER: Action highly liable to cause a death or serious injury. WARNING: Action liable to cause a death or serious injury. CAUTION: Action liable to cause light injury, medium trouble or physical damage. If you find any of these indicators when removing jammed paper, adding toner, or reading the manual, be sure to follow the information. If the safety cautions in the manual become illegible due to soilage, etc., please buy a new copy from your Service Centre. 1-3 Section 1 : Precautions for Installation and Use 3. Requirements for Safe Use 3. Requirements for Safe Use To ensure your safe use of the machine, the following describes the precautions you are required to observe without fail for the power source of the machine and during installation and routine handling. Be sure to read and observe them. Power Source CAUTION: Plug Socket · A plug socket is limited in capacity. Use only a power source with the correct rating for the machine; otherwise, hazardous situations such as smoking or overheating may occur. See the following list to match the power supply and power consumption: a) 230V/50Hz: More than 10A b) 110V/60Hz: More than 15A c) 230V/60Hz: More than 10A d) 127V/60Hz: More than 15A Avoid multiple connections in the same outlet. Do not use multiple outlet adaptors. · CAUTION: Power Plug and Lead · Be sure to insert the power plug firmly into the power socket. Otherwise an accident may occur as a result of smoking or overheating. If the inserted power plug is loose in the socket, even after it has been positively inserted, disconnect the plug and contact your electrical contractor. The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not bend or crush the power lead. If your copier power lead is bent or damaged in any way, contact your Service Centre immediately. Do not attempt to repair it yourself, and do not continue to operate the copier. A damaged power lead may result in overheating, a short circuit, or fire. Do not bundle or coil the power lead of the copier. Otherwise an accident may occur as a result of overheating or fire. · · · CAUTION: Connecting Multiple Loads to One Socket Outlet Prohibited Never connect multiple loads to one socket outlet using a multi-outlet extension lead or branched socket. Otherwise an accident may occur as a result of overheating or fire. CAUTION: Extension Lead An extension lead should never be used with this machine. 1-4 Precaution for Installation and Use Section 1 : Precautions for Installation and Use 3. Requirements for Safe Use (continued) WARNING: Earth wire (Taiwan and the Philippines Only) · Be sure to attach the earth wire to the machine and connect it to the ground correctly; otherwise, a leak may occur to electrically shock the operator during machine operation. The earth wire is supplied as an accessory to the machine. The earth wire connected to any inadequate place may cause explosion or electric shock. Do not connect the earth wire to any of the following: (1) Gas pipe (2) Lightening conductor (3) Earth wire for telephone (4) Resin water pipe, or any water pipe or tap not allowed to be connected to the earth wire by Waterworks Office If you have any questions on connecting the earth wire, please consult your Service Centre. · Environment CAUTION: Prevention of Fire Do not install near flammable materials, curtains and volatile combustibles, that can catch or cause fire. CAUTION: Prevention of Short Circuit Do not install the copier where it could be splashed with rain water, or water from a tap, to avoid a short circuit. CAUTION: Temperature and Humidity · Keep away from direct sunlight, heat sources such as stoves, cool air from an air conditioner and hot air from a heater. Avoid any environment that is outside the range shown below: 10 to 30°C in temperature 10 to 80% in humidity. · CAUTION: Ventilation · · · Maintain the installation place well-ventilated. Keep away from dust or corrosive gases. These materials may cause poor image quality. During the use of machine, the machine generates ozone but in an insufficient amount to cause any hazard to the human body. However, if the machine is used in a poorly ventilated room, many copies are made, or plural copiers are used at the same time, an odour may be detected. Ensure adequate ventilation for a comfortable working environment. 1-5 Section 1 : Precautions for Installation and Use 3. Requirements for Safe Use (continued) CAUTION: Vibration Do not install on a floor which is subject to vibration or is not level. CAUTION: Installation Space Allow sufficient space for facilitating copy operation, changing parts, and periodic inspection. Especially leave an adequate space behind the machine to let a hot air out from the rear fan. Unit: mm 500 400 645 430 800 687 200 1645 1145 995 1475 1687 Konica 7033 + DB-208 Unit: mm 500 400 645 430 800 687 200 1645 1145 995 1475 1687 Konica 7033 + DB-208A 1-6 Precaution for Installation and Use Section 1 : Precautions for Installation and Use 3. Requirements for Safe Use (continued) Unit: mm 270.3* 546 645 430 500 800 687 200 1645 1145 1191 1397 1891.3 1687 * Dimensions required when the Finisher is withdrawn. Konica 7033 + FS-105 + DB-608 Precautions for Routine Handling CAUTION: Actions in Response to Troubles · If the Service Call screen is displayed and copier operations cannot be continued any more, stop the operation to prevent any unexpected accident. Write down the Report Code as stated on the 2nd line of the message, then switch off the copier and disconnect from the power socket. Contact your Service Centre and inform them of the Report Code. Do not touch the high temperature or high voltage parts indicated with caution labels or described in the manual. Do not touch the inside of the machine for any other purpose than removing jammed paper or adding toner. If machine repair is necessary, be sure to contact your Service Centre. Never attempt to repair it by yourself. If any abnormal sound, smell or smoke comes from the machine, immediately stop using it, turn off the power switch, disconnect the power plug and contact your Service Centre. If the breaker trips or the fuse blows, turn off the power switch, reset the breaker or the fuse, and turn on the machine. If the same situation occurs again, contact your Service Centre. Insure the replacement fuse conforms with the rating of the power source. Never use a fuse with an incorrect rating. · · · · · · 1-7 Section 1 : Precautions for Installation and Use 3. Requirements for Safe Use (continued) CAUTION: Prevention of Fire Do not use volatile combustibles such as a thinner or alcohol near the machine. CAUTION: Prohibition of Machine Modification Do not modify or remove any parts by yourself. CAUTION: Prevention of Machine Troubles · · Do not drop small metallic objects such as paper clips or staples inside the machine. Do not place any heavy or hard objects such as a vase, books or ornaments on the machine. CAUTION: Recommendation of Periodic Check Be sure to check periodically the following points: (1) The main lead or the power plug does not generate abnormal heat. (2) The power plug is not inserted loosely or the lead is not cut or scratched. (3) The earth wire is correctly connected. (4) The power plug or the power outlet is not covered with dust. If you find anything abnormal in the above items, stop using the machine and contact your Service Centre. CAUTION: Toner · · Keep the toner cartridge away from children. The toner is nontoxic; however if you inhale or contact with eyes by accident, flush with water and seek medical advice. Do not throw the empty toner cartridge into a fire. If it is thrown into a fire the toner may ignite and cause a dangerous situation. CAUTION: LCD Screen The touch screen is covered with a glass. Do not drop solid objects on the touch screen, or put excess weight or pressure on it; otherwise the glass may be scratched or broken and you may be injured. CAUTION: Finisher Paper Capacity The capacity of the Finisher exit tray is listed below. When the total number of copies in the copy run exceeds the stated capacity, be sure to unload the exit tray whilst the copier is still copying. Failure to do so will cause the copier to jam. The following capacity is for 80g/m2 paper. Non-Sort Mode Tray 1: 100 sheets/10 sheets (thin/thick paper, transparency film, etc.) Tray 2/3: 500 sheets (A4R, A4, B5R, B5, 8.5"x11"R) 300 sheets (A3, B4, F4/8"x13", A5R*) 1-8 Precaution for Installation and Use Section 1 : Precautions for Installation and Use 3. Requirements for Safe Use (continued) Sort/Group Mode Tray 2/3: 500 sheets (A4R, A4, B5R, B5, 8.5"x11"R) 300 sheets (A3, B4, F4/8"x13") Staple-Sort Mode 500 sheets max. (A4R, A4, B5R, B5, 8.5"x11"R) 300 sheets max. (A3, B4, F4/8"x13", A5R*) *: Load A5 in horizontal feed ( ) only. CAUTION: Finisher Operation DO NOT INSERT your finger into the two staple driving portions or into the grooves of the paper exit lever, otherwise you may be injured. DO NOT PUT your hands beneath or above the middle exit tray of the Finisher when it is moving, otherwise you may be injured. CAUTION: Clearing Wedged Staples Please be careful when clearing wedged staples since it may cause injury. CAUTION: Paper Capacity for the Exit Tray The exit tray capacity is 100 sheets. If a copy run of more than 100 is required, be sure to remove the copies from the exit tray before the maximum capacity is reached. Failure to do so will cause the copier to jam. CAUTION: Power Saver and Weekly Timer · · During Power Saver mode the copier is still connected to the mains power supply and power is still applied to certain areas of the machine. To avoid any unexpected troubles turn the power OFF when not using the copier for long periods of time. When the Weekly Timer indicator is lit, turning power OFF will disable weekly timer function. CAUTION: Fixing Unit The Fixing unit is internally very hot. To avoid getting burned, DO NOT TOUCH. Be careful when withdrawing the fixing unit. CAUTION: Drum Unit The drum unit has a high voltage generated. To avoid an electrical shock, DO NOT TOUCH. CAUTION: ADU Guide Plate The ADU guide plate is not latched when raised. Do not release it, otherwise the ADU guide plate will slam shut and may cause injury. 1-9 Section 1 : Precautions for Installation and Use CAUTION: Dispose of a Disused Copying Machine Do not dispose of this copier yourself. Contact your Service Centre, who can arrange for its safe disposal. If you change the place of installation, please contact your Service Centre. 1 - 10 Section 2 : Preparation for Use 1. Paper Supply Paper Out Indication Loading Paper 2. Toner Supply Toner Supply Indication Preparation Adding Toner Section 2 : Preparation for Use 1. Paper Supply 1. Paper Supply Paper Out Indication When the paper tray is empty, the size key on the Basic screen is dimmed. Basic screen Size key is dimmed. Touch the "PAPER SIZE" key on the Basic screen to display the Tray Selection screen. The Paper Out icon appears in the tray key on the Tray Selection screen. Load the copy paper into the tray. Tray Selection screen Paper Out icon 2-2 Section 2 : Preparation for Use 1. Paper Supply Paper Supply Multi-sheet Bypass Tray Multi-sheet Bypass Tray ADU Tray 1 Tray 2 Tray 3 Tray 4 Konica 7033 + DB-208 Konica 7033 + DB-208A Multi-sheet Bypass Tray ADU Tray 1 Tray 2 Tray 3 ADU Tray 1 Tray 2 Storage Konica 7033 + DB-608 Tray Specifications Tray 1~4 (machine with DB-208): Universal tray Copy paper capacity : 500 sheets (80g/m2) Copy paper size : A3, B4, F4 (8.5"x13"), A4R, A4, B5R, B5, A5R, 8.5"x11"R Paper weight : 60 to 90g/m2 (80g/m2 is recommended.) Tray 1~2 (machine with DB-208A/608): Universal tray Copy paper capacity : 500 sheets (80g/m2) Copy paper size : A3, B4, F4 (8.5"x13"), A4R, A4, B5R, B5, A5R, 8.5"x11"R Paper weight : 60 to 90g/m2 (80g/m2 is recommended.) Tray 3 (machine with DB-608): Service-fixed tray Copy paper capacity : 1,500 sheets (80g/m2) Copy paper size : A4 (The copy paper size can be changed to the following. Contact your Service Centre.) A4R, A4, B5R, B5, A5R, 8.5"x11"R, 8.5"x11" Paper weight : 60 to 90g/m2 (80g/m2 is recommended.) Multi-sheet bypass tray: A3 to A5R Copy paper capacity : 100 sheets (80g/m2) Use 1 sheet at a time for thin/thick paper, OHP transparent film/reproducible paper/label paper Paper weight : plain paper; 60 to 90g/m2 (80g/m2 is recommended.) thin paper; 50 to 59g/m2 thick paper; 91 to 130g/m2 2-3 Section 2 : Preparation for Use For easy feeding Fan the copy paper a few times in order to prevent paper misfeeds. 1. Paper Supply (continued) How to store paper Store paper on a flat surface in a cool, dry area. Keep partially used packages tightly wrapped during storage. How to load copy paper Stack paper curly side up into each tray. Copy paper capacity Be sure not to stack above the red line of the label as shown below. Label To this point 2-4