17" Wide TFT-LCD TV User's Manual FCC Information This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation. Thank you for selecting our 17" TFT-LCD Wide TV monitor. Please take a few minutes to read this user's manual for the best performance of this TV. Please keep this user's manual for future reference. The present home appliance is certified and approved by EMC/EMI and can be used in all places including residency area. Information in this manual is subject to change without prior notice. If this equipment does cause unacceptable interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Ver 2.00E Consult the dealer or an experienced Radio/TV technician for help. 2 17" WIDE TFT-LCD TV 3 Safety Instructions Good posture when using TV For a comfort and efficient work, please keep a good posture and install TV properly. Keeping your forearms parallel to the floor with your elbows at the sides, and holding your elbow at a 100 to 110° angle. Make the sources does not reflect on your screen. 10°~15° 70°~135° Keep the top of the monior parallel to your eye level or about 2 to 3 above eye level. Adjust your screen angle to avoid the reflected light. Notice Mark & Meaning To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. Maximize your back's contact with the back of the chair. Here is Notice mark with & and its meanings are as followed; Warning : If you manipulate against the notice, it may cause serious injury or death to user. Caution : If you manipulate against the notice, it may cause slight injury to user or appliance. Adjust your keyboard and chair height so that your elbows can hang comfortably at your side. Reference For efficient long-time work, please take a rest regularly. Please take a rest regularly from a work to keep a good sight. Keep the product clean all the time. Keep a good posture to minimize a muscle strain. 4 17" WIDE TFT-LCD TV 5 NOTES for Power Warning Connect a power cord to a grounding wall out. Unstable of power connection cause an electric shock or injury. Caution Do not disconnect a power cord while using the product. This may damage to a product by an electric shock. Unplug the power cord when cleaning the product or moving it. This may cause an electric shock or fire. Use a proper voltage. This may cause a damage or electric shock. When it is thundering and lightening, disconnect power cable and signal cable. This may cause an electrical shock or fire. NOTES for Installation Warning Do not connect too many extension cords or plugs to a wall outlet. This may cause a fire. Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products. Do not touch the plug with wet hands. This may cause an electrical shock. Keep children from damp-proof or packing vinyl bag. Unplug the power cord, if you do not use the product for a long time. Dust may cause a fire, a leakage of electricity, electrical shock. If you eat a damp-proof, it can be dangerous. Please go to a near hospital and get a proper treatment. Also packing vinyl bag can cause suffocation if children play with it. Match wide blade of plug to wide slot. Fully insert. This may cause electric shock or fire. Do not place a heavy material on the TV or lean over the product. Its violation may cause injury to user or damage to the product. Hold the head part of power cord when you unplug it from the wall outlet. Do not bend the power cord or do not make it be pressed by heavy materials. Its violation may cause an electric shock or fire. Do not place a power cord and signal cables on a passage. This blocks the passage and may cause an injury, product damage, electric Do not insert a conductor into the other side of a power cable when one side of it is connected to a wall outlet. Also do not touch the power cord right after unplugging it. This may cause an electrical shock. Install the product in the neat and dried place. Dust and moisture may cause an electric shock, fire and damage. shock and fire. Especially, make children be careful. This may cause an electric shock, fire and defect. Do not use a damaged power cord, plug and loose outlet. This may cause an electric shock or fire. Contact service center after unplugging the power cord if there is a noise, smoke or strange sound in the product. This may cause an electric shock or fire. 6 17" WIDE TFT-LCD TV 7 Caution Turn off the power and unplug a power cord if you drop the product or damaged. This may cause an electric shock or fire. After then, request to a qualified person to perform servicing. The vent and other openings in the cabinet are designed for ventilation. To prevent from covering or blocking these vents and openings, install the product in a large space and well-ventilated place (At least 10cm away from the wall). Insufficient ventilation may cause overheating and/or shorten the life of the Do not insert the metal objects like a coin, hairpin, wire or combustible objects like a paper, match into a product. Especially, make children be careful. This may cause an electric shock, fire or injury. When objects have fallen into the product, unplug a power cord and request a qualified person to perform servicing.. Do not block the openings of the product with a table cover or curtain. Insufficient ventilation may cause overheating and/or shorten the life of the product. Also this may cause a fire. product. Also this may cause a fire. Do place a liquid like a cup of water and drink on the product. If spill water or liquid on the product, this may cause an electric shock or fire. Install the product on the flat and safe place. Otherwise, it can fall. If it falls, it may cause an injury or damage of the product. Do not expose this product to rain, moisture, oil and smoke. Also do not install the product in a car. This may cause an electric shock or fire. Keep the product away from the electromagnetic waves. Keep the product away from the direct rays of the sun. Do not place a candlelight, mosquito stick and cigarette on the product and keep away the product from the heat. This may cause an electric shock or fire. This may cause the product damage. Do not use or place a flammable spray or the inflammables near the product. This may cause an explosion or fire. NOTES for Move Warning Please turn off the power before moving. This may cause a damage and electric shock. Keep the power cord from the heat sources. If the cover of the power cord is melt in the heat, it may cause an electric shock and fire. An outdoor antenna system should not be placed near overhaed power lines. If antenna is near to the overhead power lines, it may cause an electric shock or fire. Disconnect all cables before moving. This may cause a damage and electric shock. 8 17" WIDE TFT-LCD TV 9 Caution Keep away the batteries of remote control from children. Be careful not to impact or shock to the product when moving it. This may cause an injury or damage of the product. If children eat it, please contact doctor directly and get a proper prescription. Please use a packing box when moving the product again. Warning Please take a rest from work to keep a good sight. Hold LCD panel in hands and set the front is forward. If you drop the product, this may cause an electric shock or fire. Please request its service to a qualified service person. Keep the product clean all the time. Keep a good posture to minimize a muscle strain. NOTES for Use Warning Do not disassemble, repair or modify the product. This may cause an electric shock or fire. If you need to check, repair or modification, please contact a qualified service person. For efficient long-time work, please take a rest regularly. Do not press or scratch LCD panel with sharp materials. This may cause a damage of panel. Keep a certain distance from the screen. If you use the product near for a long time, it can cause sight failing. Refer user manual and adjust proper resolution and frequency. When cleaning the product, do not spray water directly to the product or brush with the inflammables. This may cause an electric shock or fire. When cleaning the product, use an exclusive cleaner. (Do not use a benzene, alcohol etc.) Keep the product away from the water or moisture. This may cause an electric shock or fire. Keep the product away from the inflammables. This may cause an explosion or fire. When cleaning LCD panels, unplug the power cord first, and then brush with soft cloth. Do not use wet cloth. If water flows into the product, it can cause serious electric shock and damage. 10 17" WIDE TFT-LCD TV 11 Temp. & Humidity for USE Contents 0~35°C -10~50°C 10~90% RH 10~90% RH Operating Temperature Storage Temperature Operating Humidity Storage Humidity The optimal resolution for this product is 1280 X 768 @ 60 Hz. Normally, LCD is a very high technology product with more than 2.95 million pixels, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product and this is not trouble or defect. CHAPTER 1. Checking before use 1-1. Main Features 1-2. Package Contents 1-3. Product Parts 1-4. Connections 16 16 16 16 CHAPTER 2. Remote Control 2-1. Buttons 2-2. Installing batteries in the Remote control 2-3. Power On/Off 2-4. TV / PC mode 2-5. Change Input Source 2-6. How to use MENU 2-7. Memorizing TV Channel 2-8. Changing TV Channel 2-9. Volume Control / MUTE 2-10. Auto Adjustment of Monitor Display 2-11. Freezing the Picture 2-12. Set PIP / Control PIP Size 26 26 26 26 26 26 26 26 26 26 26 26 12 17" WIDE TFT-LCD TV 13 Contents CHAPTER 1 Checking before 2-13. Change PIP Position 2-14. Control screen size 2-15. Control Audio Menu 2-16. Audio Swap (Sound Swap) 46 46 46 46 1-1. Main Features 1-2. Package Contents 1-3. Product Parts 1-4. Connection CHAPTER 3. use MENU Control 3-1. Function Buttons 3-2. TV Menu 3-3. PC Monitor Menu 46 46 46 CHAPTER 4. SIZE 4-1. Product Size 4-2. Specification 4-3. The Standard Signal Mode for PC Monitor 46 46 46 CHAPTER 5. Concerning Services 5-1. Troubleshooting 46 14 17" WIDE TFT-LCD TV 15 1-1. Main Features Easy & Convenient Installation Unlike conventional CRT TV, it allows user to install and use without much limitation with its slim size and design. 1-2. Package Contents Please make sure the following items are included with your LCD TV. If any items are missing, contact with your dealer. Easy-to-use Function User can enjoy using the product even more due to its easy-to-use remote control and to rotary function buttons on the TV. Simple Installation on the Wall User can install unit on the wall simply with three screws or nails. (Attention : The wall should be solid enough to avoid that the unit is crooked or dropped.) Auto Adjustment User can simply adjust the TV to the best conditions with one button of remote control. Remote Control Batteries (Aa 2) User's Manual Remarkable Functional Extension The unit carries out the functions of PC monitor as well as TV and can work in connection with various products such as DVD, VCR, Camcorder and Audio. Signal Cover DC 12V Adapter Perfect Image The most advanced TFT-LCD panel is adapted to the unit. It removes the screen flicker effect of Braun tube mode, which relieves eye fatigue to a considerable point and provides the user perfect images. Power Cord D-Sub Cable DC 12V Adapter Profound and Rich Sound Effect User can enjoy profound and rich sound without additional audio player thanks to the unit's audio part with its special speakers, which is of the best quality among the products of the same rank. Signal Cover is included in the product box. Please assemble it when you install the TV. 16 17" WIDE TFT-LCD TV 17 1-3. Product Parts 1-4. Connections Power Connection The present unit adjusts the voltage automatically. If you use 110V power, please connect the adapter convertible to 110V to AC cord before use. Please check that the AC cord is plugged in correctly when you connect it to an outlet or DC adapter. Connection of Antenna Flat Twin Leads Antenna Converter TV Antenna Power & Volume Control Menu CH Up/Down Speaker D-Sub Connector (PC Signal Input) Composite Video In Jack Audio (R) In Jack Stereo Audio Out Jack IR Receiver (Remote Control Sensor) Source Change (Input Mode) Power Indicator Power Input Connector S-Video In Jack Audio (L) In Jack Stereo Audio In Jack TV Antenna Round Leads Make sure that the copper wire does not be bent if you use Round Lead (75-ohm). Round Leads, Flat Twin Leads and antenna converter are separate purchasing items. 18 17" WIDE TFT-LCD TV 19 Connection of Composite / S-Video Connectors Rear Part of the TV External Equipment's Output Connecting Audio IN / OUT Rear Part of the TV External Equipment's Input / Output L-AUDIO-R VIDEO S-VIDEO Connection to PC Connect a set of audio cables between the L, R Audio Input Jacks on the TV and various players (VCR, DVD, Set-Top Box, etc). Make sure that all connectors are connected with same color of input and output. S-Video output gives you better images than Composite Video output. Use Composite Audio L/R connectors for audio when you use S-Video connector. Rear Part of the TV PC Output 20 17" WIDE TFT-LCD TV 21 CHAPTER 2 Remote 2-1. Buttons Control 2-2. Installing Batteries in the Remote Control 2-3. Power On / Off 2-4. TV / PC Mode 2-5. Change Input Source 2-6. How to use MENU 2-7. Auto Memorizing TV Channels 2-8. Change TV Channel 2-9. Volume Control / MUTE 2-10. Auto Adjustment of PC Mode 2-11. Freezing the Picture 2-12. Set PIP / Control PIP Size 2-13. Change PIP Position 2-14. Control Screen Size 2-15. Control Audio Menu 2-16. Audio Swap (Sound Swap) 22 17" WIDE TFT-LCD TV 23 2-1. Buttons POWER : Turns the LCD TV on and off SELECT : Change input source CH CHANNEL UP / DOWN : Change TV channel & Move Up / Down of Sub-MENU MENU : MENU control VOL VOLUME UP / DOWN : Volume control & Move Left / Right of MENU PC 0 / ~ TV 9 : Change PC / TV signal : Select TV channels directly 2-2. Installing Batteries in the Remote Control Slide the cover out completely. Make sure to match the "+/-" ends of the batteries with the diagram inside the compartment and install 2 batteries. Replace the cover. Battery : 2 DC 1.5V AA type Be sure to put the battery correctly in order to avoid all dangers including blowout, water leakage or injury. AUTO II : Auto adjustment of PC Mode : Pause For environmental protection, please dispose of dead batteries to their separate collection can. PIP : PIP select MUTE : Silent of sound ZOOM IN / OUT : Control screen size : Change PIP position SCAN : Auto TV channel selection EXIT : Exit menu or function 2-3. Power On/Off Use POWER button of remote control to turn on/off the TV. The remote control can be used up to about 7m, 15o(R/L) from remote control sensor. 24 17" WIDE TFT-LCD TV 25 2-4. TV / PC mode Power on and press TV 2-6. How to use MENU button to enter the TV mode. Power on and press PC button to enter the PC mode. Press MENU button to enter main menu. Use VOL button to select left and right menu. To move to sub-menu, press MENU button. In sub-menu, use CH button to select up and down menu. To control function of menu, use VOL button. If you finish all controls of menu, press MENU button in sub-menu to enter main 2-5. Change Input Source If you want to change external input source while watching TV, please press the SELECT button on remote control. At each time you press it, the signal will change as menu and then press MENU button again to exit menu control. You can also use controlling menu. EXIT button of the bottom of remote control to finish current follows; PC TV Composite Video S-Video PC 26 17" WIDE TFT-LCD TV 27 2-7. Memorizing TV Channel 2-8. Changing TV Channel To search TV channels, press SCAN button in TV mode. To stop searching TV channel and to store searched TV channel, press MENU button. TV channel memory function works only during the airtime. If TV signal is weak, it can not be found. When the power is cut off or the unit system is reinitialized, all the recorded channel information disappears. In this case, you need to record the channels again. To erase searched TV channel, use channel edit function of menu mode. Channel 2~69 are for "off-air"(antenna) and channels 1 and 14~125 are for cable channels. Channels 14~69 are for both antenna and cable channels. To select one of them, use source menu in TV menu. If some channels are stored, you have only stored channels to explore by pressing these buttons. If you have not saved any channel yet, you go through all the channels with these buttons. For your convenience, it is recommended to store some channels before use. When you press CH buttons in TV mode (including PIP mode), the TV changes channels in sequence. You can view any channel directly by using number buttons on the remote control. You can also change TV channel in menu mode. 28 17" WIDE TFT-LCD TV 29 2-9. Volume Control / MUTE 2-10. Auto Adjustment of Monitor Display You can control volume when audio signal is connected such as TV, PC and external signal. Press VOL button to control the volume. The system volume can be controlled by OSD rotary button or in the OSD MENU. Press MUTE button to cut off the sound temporarily and press it again to revive the sound. Press AUTO button of remote control to adjust the size of monitor screen and resolution to the best conditions automatically. This function is only for the PC Monitor mode. 2-11. Freezing the Picture Press II button to freeze the picture and press again to continue. 30 17" WIDE TFT-LCD TV 31 2-12. Set PIP / Control PIP Size 2-14. Control Screen Size PIP button to create PIP screen. Use ZOOM IN button to magnify the size of the screen. Press PIP button to change the screen size, The size changes as following order (off small middle large) Use ZOOM OUT button to diminish the size of the screen. The screen size is magnified/diminished on the basis of the center of the screen. You can not make screen size smaller than actual size. To finish changing the screen size, press EXIT button. PIP function is only available in PC monitor mode. You can choose PIP input signal among TV signal or external signals (composite, S-Video) You can select PIP input signals in menu mode. 2-15. Control Audio Menu 2-13. Change PIP Position Press VOL button. Use of remote control to change the PIP position. PIP position is also changeable in menu mode. Select Audio menu using CH button when volume control menu is displayed. You can control volume, Treble, Bass, Balance, Audio Preset menu. Adjust the values of each menu again using VOL button. 32 17" WIDE TFT-LCD TV 33 2-16. Sound Swap CHAPTER 3 Menu 3-1. Function Button You can swap the sound of main audio and PIP audio when both of them are coming out. This function is only available when PIP is on and audio is coming out. While audio of PIP is on, use VOL button to display menu of volume control. Then press CH DOWN button to enter to Sound Swap menu. This function is useful when you watch digital TV as a main screen and PIP is on. 3-2. TV Menu 3-3. PC Monitor Menu 34 17" WIDE TFT-LCD TV 35 3-1. Function Button Function buttons work as follows ; 3-2. TV MENU Picture (Screen setting) : Power and volume adjustment, Main Menu select (rotary button) This button turns on and off. You can move main menu items by turning this button. You can control the volume by turning this button. You can control the values of menu by turning button. Brightness This controls the brightness of the LCD. Contrast This controls the contrast of the LCD. Sharpness This controls the sharpness of the LCD. CH / CH : Change of channel and sub-menu Sharp 1 Color 100 Soft It changes TV channel. It selects sub menu (up and down). This adjusts the depth of TV image color. Tint MENU : Menu Selection Start or quit the main menu. Enter to sub-menu or return to main-menu. This adjusts the tint of TV image color. Closed Caption Settings This controls the menu of closed caption settings. SOURCE : Selection TV, PC monitor or other external input(Composite, SVideo) By pressing the button, you can have PC signal PC monitor signal in turn. TV Composite signal S-Video 36 17" WIDE TFT-LCD TV 37 OSD (OSD menu setting) Closed Caption Mode Select the mode of closed caption. (CC1, CC2, Text1, Text2, XDS) This enables you can see the caption and the text of broadcasting, video, DVD who are using caption. Closed Caption Background Select the color of background (Transparent / Black) Closed Caption (Caption function On/Off) The screen may be darker when caption is on than it is off. Closed caption is not available in PIP screen. (In some DVD and Video, closed caption may be available in PIP screen) OSD Background Select the color of OSD background. Opaque / Transparent OSD Timeout User can select the time up to 60 seconds. OSD Position Preset Controls the position of OSD menu. OSD H/V Position Controls the position of OSD menu horizontally / vertically. OSD Language User can select OSD language. (Korean, Japanese, English, French, Italian, German) 38 17" WIDE TFT-LCD TV 39 Audio (Audio setting) Utilities Volume Control the volume of audio. Treble Control the volume of Treble. (Select USER as a sound mode) Bass Control the volume of Bass. (Select USER as a sound mode) Balance Controls the balance of speaker (left and right) Audio Preset Select sound mode according to the display source. - Movie : Best audio setting for movie. - News : Best audio setting for NEWS. - Standard : Standard audio setting. - User : User can adjust audio setting as user please. Source You can select a source. PC TV Composite Video S-Video PC Sleep Timer Adjust the length of the timer up to a total of 120 minutes (2Hrs). Sleep Timer Remaining shows remaining time. Room Lighting Correct screen quality according to external lighting Normal / Movie/ Bright Freeze Frame This pauses the image. Zoom Setting Magnify / Diminish screen size. (6) Mute It can on/off Mute function.. (7) Sound Swap This is the function that exchanges the sound of main screen and PIP screen and this is not available in TV mode. 40 17" WIDE TFT-LCD TV 41 More Setting Zoom (Screen Magnify / Diminish) Magnify / Diminish the screen size. You can not make screen size smaller than actual size. You can magnify the screen size by ten times. Zoom h pan (Move zoom screen horizontally) Move screen horizontally, right and left. Zoom v pan (Move zoom screen vertically) Move screen vertically, up and down. Color Temp This provides three preset color adjustments. Warm 5000 °Ê 7300 °Ê 9300 Cool User : User can adjust the values of red temp, green temp and blue temp as user please. Sharpness Filter This adjusts the clarity and the focus of screen image. Softest Soft Normal Sharp Sharpest Scale Mode Normal : Image displayed in full screen. Fill Aspect Ratio : Image displayed with the aspect ratio 4:3 Letterbox to 16:9 : Changed Letterbox broadcasting screen to the ratio of 16:9. Letterbox Subtitles to 16:9 : Changed Letterbox subtitles broadcasting screen to the ratio of 16:9. Wide : Full image displayed widen horizontally. Zoom : Image enlarged by 150% from the center of the screen. Anamorphic : Image displayed in panoramic view. Video Game Zoom : Image changed to be suitable for video game. (4) Content Blocking Blocking a particular TV source by specifying the grade. (This function is not for domestic use) (5) Factory Reset This allows you to reset all the OSD control settings back to the factory settings. 42 17" WIDE TFT-LCD TV 43 TV (TV setting) NOTES When you search channels, only the channels, which are on air, are found. Edit channels when they are not found due to the weak signal. If you change TV region in the below no.8, you need to search channels again. Source It selects a TV broadcasting signal (Antenna/Cable). NOTES If you select a cable broadcasting, you can receive both cable and antenna signal. Region It selects TV broadcasting system of area. (KOREA / USA / JAPAN / TAIWAN) Channel You can move through the TV channels with this menu. Channels 2~69 are for "off-air"(antenna) and channels 1 and 14~69 are for cable channels. Channels 14~69 are for both antenna and cable channels. To select one of them, use source menu of TV menu. Tune Type Select channel search method. (Auto or Manual) (Manual tuning mode can be used when the quality of searched channel is not good.) Fine Tune You can search channels manually when channel quality is not good. When you choose manual tuning mode, fine tuning function works. Channel Edit It adds new entries or deletes stored channels. Channel Swap It changes stored channel numbers. After the channel swap window appears on the screen, you can change the current channel number to a new one you want. Channel Search This searches TV channels and stores them. 44 17" WIDE TFT-LCD TV 45 3-3. PC Monitor Menu Picture (Screen setting) Closed Caption Mode Select the mode of closed caption. (CC1, CC2, Text2, XDS) This enables you can see the caption and the text of broadcasting, video, Brightness It controls the LCD brightness. Contrast It controls the LCD contrast. Phase It adjusts the focus, clarity and stability of image. Frequency It controls the horizontal size of full screen. H position It controls horizontal image position (Left / Right). V position It controls vertical image position (Up / Down). Closed Caption Setting This controls the menu of closed caption settings This function is only for TV broadcasting and video screen and not available for PC mode. Only when PIP is on, this menu works. DVD who are using caption. (Select CC1 in domestic) Closed Caption Background Select the color of background (Transparent / Black). Closed Caption (Caption function On/Off) The screen maybe darker when caption is on than it is off. Closed caption is not available in PIP screen. (In some DVD and Video, closed caption maybe available in PIP screen). 46 17" WIDE TFT-LCD TV 47 PIP (Picture in Picture setting) H/V position Controls the position of PIP screen (Horizontal / Vertical). PIP position preset Select one of preset PIP position. PIP TV (TV PIP Function Setting) NOTES You can adjust the PIP menu when PIP mode is "ON" and the signal is input. Brightness (The brightness of PIP screen) Contrast (The contrast of PIP screen) Sharpness (The clarity of PIP screen) Color (The color depth of PIP screen) Tint (The tint of PIP screen) PIP Source (PIP signal input) Select PIP video signal input. PIP Mode Setting Channel You can move through the TV channels with this menu. Channels 2~69 are for "off-air"(antenna) and channels 1 and 14~69 are for cable channels. Channels 14~69 are for both antenna and cable channels. To select one of them, use source menu of TV menu. Warning PIP TV function setting is available when PIP signal input is TV. Tune Type Select channel search method (Auto or Manual). (Manual tuning mode can be used when the quality of searched channel is not good.) Fine Tune You can search channels manually when channel quality is not good. When you choose manual tuning mode, fine tuning function works. 48 17" WIDE TFT-LCD TV 49 Channel Edit It adds new entries or deletes stored channels. Channel Swap It changes stored channel numbers. After the channel swap window appears on the screen, you can change the current channel number to a new one you want. Channel Search This searches TV channels and stores them. NOTES When you search channels, only the channels, which are on air, are found. Edit channels when they are not found due to the weak signal. If you change TV region in the below no.8, you need to search channels again. OSD (OSD Menu Setting) Source It selects a TV broadcasting signal (Antenna/Cable). NOTES If you select a cable broadcasting, you can receive both cable and antenna signal. OSD Background Select the color of OSD background. Opaque / Transparent OSD Timeout Region It selects TV broadcasting system of area. (KOREA / USA / JAPAN / TAIWAN) User can select the time up to 60 seconds. OSD Position Preset Controls the position of OSD menu. OSD H/V Position Controls the position of OSD menu horizontally / vertically. OSD Language User can select OSD language. (Korean, Japanese, English, French, Italian, German) 50 17" WIDE TFT-LCD TV 51 Audio (Audio setting) Utilities Volume Controls the volume of audio. Treble Controls the volume of Treble. (Select USER as a sound mode) Bass Controls the volume of Bass. (Select USER as a sound mode) Balance Controls the balance of speaker (left and right) Audio Preset Select sound mode according to the display source. Movie : Best audio setting for movie. News : Best audio setting for NEWS. Standard : Standard audio setting. User : User can adjust audio setting as user please. Auto Adjustment This adjusts the screen automatically to the best condition. Source You can select a source. PC TV Composite Video S-Video PC Sleep Timer Adjust the length of the timer up to a total of 120 minutes (2Hrs). Sleep Timer Remaining shows remaining time. Room Lighting Correct screen quality according to external lighting Normal / Movie/ Bright Freeze Frame This pauses the image. Zoom Setting Controls the size of the screen. Mute It can be on/off Mute function. Sound Swap This is the function that exchanges the sound of main screen and PIP screen and this is not available in TV mode. 52 17" WIDE TFT-LCD TV 53 More Setting Zoom (Zoom In / Out) Zoom in available up to ten times. (You can not make screen size smaller than actual size.) Zoom h pan Move the zoom screen horizontally (left / right) Zoom v pan Move the zoom screen vertically (up / down) Color Temp This provides three preset color adjustments. Warm 5000 7300 9300 Cool User : User can adjust the values of R.G.B.. Sharpness Filter This adjusts the clarity and focus of screen image. Softest Soft Normal Sharp Sharpest Scale Mode Fill All : Image is enlarged to fill whole of screen. Fill Aspect Ratio : Image is enlarged to fill the screen horizontally or vertically keeping the ratio of image. DTV : Image is enlarged about 105% when PC signal is input. One To One : Image is displayed as it is without any magnification or diminution. 54 17" WIDE TFT-LCD TV 55 Content Blocking This function protects TV image media. Setting restriction upon certain film ratings This function is used to restrict the viewing of VCR or DVD films of certain Password setting Zoom in available up to ten times. (You can not make screen size smaller than actual size.) A password is needed to use Content Blocking function. A password needs to be set newly immediately after purchase and doing Factory Reset. (When doing Factory Reset, the original password is erased. Therefore, a new password needs to be set.) On above menu, press Menu button for going into enter menu and set the new password with CH up/down and VOL+/- buttons. Press select button to set the new password. TV Rating Restriction Password changing ratings. After putting in the password, move on to the film rating restriction menu, select the ratings you wish to restrict with Menu button on your remote control, finalize your selection with Select button. The ratings higher than selected are automatically restricted. In order to cancel the selection, move on to the selected rating and press Select button. Restriction for each rating should be cancelled individually. This function is used to restrict the viewing of TV programs of certain Put in your password and change it in the same manner described above. ratings. The selection and cancellation of such ratings may be done in the 56 17" WIDE TFT-LCD TV 57 same manner as are film restriction. Factory Reset This allows you to reset all the OSD control settings to the factory settings. CHAPTER 4 Size Notes to keep in mind when using MENU You must check if all menus are adjusted properly before use. 4-1. Product Size 4-2. Specification 4-3. The Standard Signal Mode for PC Monitor TV MODE TV Source : Antenna / Cable TV Region : Korea or your region Check if TV channels are stored properly Check input source is TV. Whether the Mute function is set or not PC Monitor mode Resolution : 1280 X 768 (the best setting) Vertical frequency : 60 Hz (the best setting) Check if the input signal is RGB/HDTV Check if the Sound Swap is set as a PIP. 58 17" WIDE TFT-LCD TV 59 4-1. PRODUCT SIZE 422mm 4-2. SPECIFICATION Design and all specifications are subject to change without notice. 422mm Product Name LCD 17 Wide TFT-LCD TV Type Screen Size Pixel Pitch a-Si TFT-LCD 17 Wide (diagonal length) 0.291mm x 0.291mm 400 : 1(Typ.) 450 cd/m2 372.48 mm (H) x 223.49 mm (V) L/R : 88°/88°, U/D : 88°/ 88° LVDS Max. 5W x 2 / Stereo VHF:Channels 2~13, UHF:Channels 14~125 Cable : Channels 1, 14~125 382mm 338mm 373mm 338mm Contrast Ratio Luminance Active Display Area Viewing Angle Interface 96mm 47mm 24mm Speaker TV receiving channels TV broadcasting system PC Monitor Horizontal frequency Vertical frequency Colors Maximum resolution Other resolution Power Supply Adapter Input Output Power Consumption 262mm 180mm NTSC-M mode 30 ~ 61 kHz 56~ 75 Hz 16.2M colors WXGA : 1280(H) x 768(V) XGA, SVGA, VGA AC 100V~240V, 50~60Hz DC 12V < 48W < 6.5W VESA DPMS Maximum Power Saving/OFF Power Saving Mode 262mm Weight : 5.68kg (Net) / 7.98kg (Gross) 60 17" WIDE TFT-LCD TV 61 4-3. The Standard Signal Mode for PC Monitor If the signal form the system corresponds to the standard signal mode, the screen is adjusted automatically. However, if the signal discords with it, the screen may go blank with the power LED on or display error message. Refer to the display card manual and adjusts the screen as follows. CHAPTER 5 Resolution (H x V) 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 768(best) Horizontal Frequency(KHz) 31.469 35 37.861 37.5 31.469 37.879 48.077 46.875 48.363 56.476 60.023 47.712 Vertical Frequency(Hz) 59.94 66.66 72.809 75 70.087 60.317 72.188 75 60.004 70.069 75.029 60.015 Clock Frequency(MHz) 25.175 30.24 31.5 31.5 28.322 40 50 49.5 65 75 78.75 80.136 Sync Polarity (H/V) -/-/-/-/-/+ +/+ +/+ +/+ -/-/+/+ -/+ Concerning Services The table of standard signal modes presented above shows only primary mode suitable for each resolution level concerned. In most of the cases, the resolution degrees up to WXGA (1280 X 768), whether they are included in the table or not, are adjusted automatically to their best suitable signal mode without additional adjustment by PC graphic card. If the resolution is not adjusted automatically, please set graphic card's output mode to signal mode. If your PC graphic card does not support resolution 1280 X 768, please reinstall it by downloading the newest driver from graphic card manufacturer and setting it to resolution 1280 X 768, vertical frequency 60 Hz, color 16 or 24 bites. The present unit has Plug and Play function. 62 17" WIDE TFT-LCD TV 63 5-1. Troubleshooting If the TV seems to have a problem, follow the list of possible problems and solutions presented below. If none of these troubleshooting tips applies, call your nearest service center. PC Monitor Troubleshooting No image on the screen. The VGA cable should be connected completely to the TV and computer. The display card should be inserted fully in its slot. Power switch of both PC and TV should be turned on. TV Troubleshooting Poor picture or sound quality Check all wire connections & adjust the antenna.. In the areas of poor TV reception conditions or long of distance from TV stations, you can have quality problems in the image and sound received. Make sure that a supported mode has been selected on the display card or system in use. Modify the graphic card mode properly referring to the table of standard signal modes presented in the previous page. Check if VGA cable pin is not bent or took off. Unable to turn on the equipment No picture or sound Make sure that the TV is plugged in and check the antenna connections. Black screen is displayed Check if the input source is TV or any other (PC monitor, Composite, S-video). Screen with lines or unstable image Check if there is an appliance in use disturbing electric waves. (radiophone, hair drier, electric drill, etc) Do fine tuning by manual adjustment. Unable to receive certain channels Check if the channel is set correctly Redirect the antenna by moving it right and left. Picture without sound Check the MUTE is on, if yes, press MUTE button again, Control the volume. Check if the AC cord is plugged in correctly and retry to turn on the unit. Plug the monitor AC cord off the power socket. Connect the AC cord again in 10~20 minutes. LED on TV is red flickering without image Check if the VGA cable is connected to the TV and computer correctly. Check if the computer is in power-saving mode by touching the keyboard or mouse. Image is unstable and out of focus Check if the VGA cable is connected to the computer correctly. You need to readjust the image when computer display mode changes. Please readjust the image by using Auto setting or adjustment menu. Check if the monitor and graphic card are compatible and if they are set at the proper refresh rate. If the characters appear distorted, please reset the refresh rate to 60Hz. Image size is strange Please reset the image size using vertical and horizontal positions function of screen adjustment menu. Please try Auto Adjust function. 64 17" WIDE TFT-LCD TV 65 WALL-MOUNTING POSITION Concerning services For the product's functional trouble occurred in use, client can benefit from the warranty during one year from the date of purchase. However, all services for the troubles caused by client's erroneous use or by natural calamity will be charged even during the term of warranty validity. HOLE POSITION Situations of charged services (client's responsibility to pay) All services will be charged even during the term of warranty validity if requested in the situations as below. The product want out of order because you had put foreign objects (water, liquor, coffee, etc.) The product is damaged or out of order because you dropped it or the unit was exposed to a shock. The product's external cover is harmed or degraded by organic substances such as thinner or benzene. Some accessories are lost or damaged due to the client's voluntary disassembly of the product. The product fell out of order due to the accessories used other than those supplied by manufacturer (adapter, etc.). The product fell into trouble due to the wrong voltage applied. The product fell out of order after being serviced by someone other than our client service staff. Natural calamity (thunderbolt, fire, storm, flood, gas, sea wind, earthquake, etc.) caused trouble to the product. User did not respect the present instructions manual and caused trouble to the product. The product has trouble due to client's other faults. If the purchase date can not be recognized, we count the quality guarantee term from the first day of the third month after the date of manufacture. 162 mm 92 mm HOLE POSITION HOLE POSITION 66 17" WIDE TFT-LCD TV