FILE: 091-136-24-12 DATE: 01-02-01 INSTRUCTION MANUAL AUTO POWER DC TO DC POWER CONVERTER MODEL #091-136-24-12 INPUT: 24 VOLTS DC OUTPUT: 12 VOLTS, 3 AMPS DC OUTPUT RIPPLE: 10 mv. RMS, maximum 3 YEAR WARRANTY KUSSMAUL ELECTRONICS CO., INC. 170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796 TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826 1 INTRODUCTION The Model 091-136-24-12 is a switching power converter designed to operate a 12 volt device from a 24 volt battery. The output is filtered to provide an extremely low ripple so as not to interfere with a radio or other sensitive electronic devices. The device is vented and should be mounted in a dry location with adequate spacing to permit air circulation. INSTALLATION Install the input and output wires, #16 AWG minimum, as illustrated in the installation wiring diagram. INSTALLATION WIRING 2 SPECIFICATION AND OUTLINE INPUT: 26 +/- 4 volts D.C. OUTPUT: 12.5 +/- .5 volts @ 3 amps. Maximum OUTPUT RIPPLE: 10mv. RMS. maximum WARRANTY All product of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped. Kussmaul Electronics Company, Inc. shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. products. The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. 3 ...