User manual KYOCERA KX5

User Guide for the Kyocera SliderTM Remix KX5 Phone This manual is based on the production version of the Kyocera KX5 phone. Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents: 4,901,307 5,544,196 5,504,773 5,337,338 5,490,165 5,109,390 5,657,420 5,535,239 5,710,784 5,511,073 5,267,262 5,101,501 5,600,754 5,056,109 5,416,797 5,267,261 5,778,338 5,568,483 5,506,865 5,414,796 5,228,054 5,659,569 All other trademarks are the property of their respective owners. Copyright © 2005 Kyocera Wireless Corp. All rights reserved. Ringer Tones Copyright © 2000-2002 Kyocera Wireless Corp. 82-M8529-1EN, Rev. 001 FCC/IC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Kyocera Wireless Corp. (KWC) supplied and approved case CV90-G2573-01 and holster CV90-G2958-01. Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 25 mm separation distance including the antenna and the user's body. THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The Kyocera Wireless Corp. ("KWC") products described in this manual may include copyrighted KWC and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for KWC and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the KWC products may not be modified, reverse engineered, distributed or reproduced in any manner not permitted by law. Furthermore, the purchase of the KWC products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of KWC or any third party software provider, except for the normal, non-exclusive royaltyfree license to use that arises by operation of law in the sale of a product. Kyocera is a registered trademark and Slider is a trademark of Kyocera Corporation. Race 21 are trademarks of Kyocera Wireless Corp. QUALCOMM is a registered trademark of QUALCOMM Incorporated. Openwave is a trademark of Openwave Systems Incorporated. eZiText is a registered trademark of Zi Corporation. TransFlash is a trademark of SanDisk Corporation. ii The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. Body-worn measurements differ among phone models, depending upon availability of accessories and FCC requirements. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section http://www.fcc.gov/oet/fccid after searching on the FCC ID: OVFKWC-KX5. Additional information on SAR can be found on the Cellular Telecommunications and Internet Association (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/ kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Caution The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user's authority to operate the equipment. Optimize your phone's performance Use the guidelines on page 2 to learn how to optimize the performance and life of your phone and battery. Air bags If your vehicle has an air bag, DO NOT place installed or portable phone equipment or other objects over the air bag or in the air bag deployment area. If equipment is not properly installed, you and your passengers risk serious injury. Medical devices Pacemakers--Warning to pacemaker wearers: Wireless phones, when in the `on' position, have been shown to interfere with pacemakers. The phone should be kept at least six (6) inches away from the pacemaker to reduce risk. The Health Industry Manufacturers Association and the wireless technology research community recommend that you follow these guidelines to minimize the potential for interference. · Always keep the phone at least six inches (15 centimeters) away from your pacemaker when the phone is turned on. · Do not carry your phone near your heart. · Use the ear opposite the pacemaker. · If you have any reason to suspect that interference is taking place, turn off your phone immediately. User Guide for the Kyocera Slider Remix KX5 Phone iii Hearing aids--Some digital wireless phones may interfere with hearing aids. In the event of such interference, you may want to consult your service provider or call the customer service line to discuss alternatives. Other medical devices--If you use any other personal medical device, consult the manufacturer of the device to determine if it is adequately shielded from external RF energy. Your physician may be able to help you obtain this information. In health care facilities--Turn your phone off in health care facilities when instructed. Hospitals and health care facilities may be using equipment that is sensitive to external RF energy. · · areas where the air contains chemicals or particles such as grain, dust, or metal powders any other area where you would normally be advised to turn off your vehicle engine Use with care Use only in normal position (to ear). Avoid dropping, hitting, bending, or sitting on the phone. Keep phone dry If the phone gets wet, turn the power off immediately and contact your dealer. Water damage may not be covered under warranty. Potentially unsafe areas Posted facilities--Turn your phone off in any facility when posted notices require you to do so. Aircraft--FCC regulations prohibit using your phone on a plane that is in the air. Turn your phone off or switch it to Airplane Mode before boarding aircraft. Vehicles--RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer of the device to determine if it is adequately shielded from external RF energy. Blasting areas--Turn off your phone where blasting is in progress. Observe restrictions, and follow any regulations or rules. Potentially explosive atmospheres--Turn off your phone when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in bodily injury or death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include: · fueling areas such as gas stations · below deck on boats · transfer or storage facilities for fuel or chemicals · vehicles using liquefied petroleum gas, such as propane or butane Resetting the phone If the screen seems frozen and the keypad does not respond to keypresses, reset the phone by completing the following steps: 1. Remove the battery door. 2. Remove and replace the battery. If the problem persists, return the phone to the dealer for service. Accessories Use only Kyocera-approved accessories with Kyocera phones. Use of any unauthorized accessories may be dangerous and will invalidate the phone warranty if said accessories cause damage or a defect to the phone. Radio Frequency (RF) energy Your telephone is a radio transmitter and receiver. When it is on, it receives and sends out RF energy. Your service provider's network controls the power of the RF signal. This power level can range from 0.006 to 0.6 watts. In August 1996, the U.S. Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. These guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies in the following reports: iv · · · ANSI C95.1 (American National Standards Institute, 1992) NCRP Report 86 (National Council on Radiation Protection and Measurements, 1986) ICNIRP (International Commission on Non-Ionizing Radiation Protection, 1996) Your phone complies with the standards set by these reports and the FCC guidelines. E911 mandates Where service is available, this handset complies with the Phase I and Phase II E911 Mandates issued by the FCC. Battery and charger specifications Charger CV90-60858-01 CV90-60859-01 Input 100-240 VAC / 50/60 Hz 120 VAC / 60Hz Output 4.5 V 1.5 A 5.2 V 400 mA Standard Battery: CV90-N1020-05: 3.7 V / 900 mAh Extended Battery: CV90-N1070-05: 3.7 V / 1550 mAh 093 453 037 Kyocera Wireless Corp. 10300 Campus Point Drive, San Diego, CA 92121 U.S.A. Visit us at www.kyocera-wireless.com User Guide for the Kyocera Slider Remix KX5 Phone v CONTENTS 1 2 Getting Started. . . . . . . . . . . . . . . . . . . . . . 1 Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1 Getting to know your phone . . . . . . . . . . . . . . . . 3 Viewing details about the playlist . . . . . . . . . . . 31 Erasing a song . . . . . . . . . . . . . . . . . . . . . . . . . 32 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 32 Making and Answering Calls . . . . . . . . . . 9 Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Silencing an incoming call . . . . . . . . . . . . . . . . 10 Using the speakerphone . . . . . . . . . . . . . . . . . . 10 Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 13 Understanding roaming. . . . . . . . . . . . . . . . . . . 14 7 8 Using Media Gallery . . . . . . . . . . . . . . . . 33 Accessing files . . . . . . . . . . . . . . . . . . . . . . . . . 33 Customizing Your Phone . . . . . . . . . . . . 36 Silencing all sounds . . . . . . . . . . . . . . . . . . . . . Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . Setting sounds for your phone . . . . . . . . . . . . . Using shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . Personalizing the screen . . . . . . . . . . . . . . . . . . Creating a secure environment . . . . . . . . . . . . . Setting position location . . . . . . . . . . . . . . . . . . 37 37 38 39 40 42 45 3 4 Entering Letters, Numbers, and Symbols . . . . . . . . . . . . . . . . . . . . . . 16 Storing Contacts . . . . . . . . . . . . . . . . . . . 19 Creating a new contact . . . . . . . . . . . . . . . . . . . Adding a code or extension. . . . . . . . . . . . . . . . Customizing your contacts. . . . . . . . . . . . . . . . . Editing a contact . . . . . . . . . . . . . . . . . . . . . . . . Erasing a contact. . . . . . . . . . . . . . . . . . . . . . . . Sending a vCard . . . . . . . . . . . . . . . . . . . . . . . . Customizing a phone number . . . . . . . . . . . . . . Finding contact information . . . . . . . . . . . . . . . 19 19 19 20 21 21 21 22 9 Sending and Receiving Text Messages . . . . . . . . . . . . . . . . . . . . . 46 Sending text messages . . . . . . . . . . . . . . . . . . . 46 Retrieving text messages . . . . . . . . . . . . . . . . . . 49 Customizing message settings . . . . . . . . . . . . . . 51 10 Sending and Receiving Multimedia Messages . . . . . . . . . . . . . . . 53 Sending multimedia messages . . . . . . . . . . . . . 53 Receiving multimedia messages . . . . . . . . . . . . 54 Viewing multimedia messages. . . . . . . . . . . . . . 55 5 Using the Camera . . . . . . . . . . . . . . . . . . 23 Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 25 Camera key map . . . . . . . . . . . . . . . . . . . . . . . . 25 Recording a video . . . . . . . . . . . . . . . . . . . . . . . 26 11 Using Tools and Games . . . . . . . . . . . . . 56 Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brick Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 56 57 58 58 59 59 59 59 6 Using the Music Player . . . . . . . . . . . . . . 28 Removable memory card . . . . . . . . . . . . . . . . . Formatting the memory card. . . . . . . . . . . . . . . Putting music files onto the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . Playing music . . . . . . . . . . . . . . . . . . . . . . . . . . Music Player controls . . . . . . . . . . . . . . . . . . . . Playback options. . . . . . . . . . . . . . . . . . . . . . . . Viewing details about a song file . . . . . . . . . . . . 28 28 29 30 31 31 31 vi Contents 12 Using Voice Recognition . . . . . . . . . . . . 61 Setting up voice dialing . . . . . . . . . . . . . . . . . . .61 Making a call using voice tags . . . . . . . . . . . . . .61 Making a call using digit dialing . . . . . . . . . . . . .62 Training voice recognition . . . . . . . . . . . . . . . . .64 13 Connecting to the Internet . . . . . . . . . . . 65 Using the Web Browser . . . . . . . . . . . . . . . . . . .65 14 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 67 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 User Guide for the Kyocera Slider Remix KX5 Phone vii 1 GETTING STARTED Charging the battery You must have at least a partial charge in the battery to make or receive calls. To charge the battery: 1. Connect the AC adapter to the jack on the bottom of the phone. 2. Plug the adapter into a wall outlet. The battery icon in the upper-right corner of the screen tells you whether the phone is: · Charging (the icon is animated) · Partially charged · Fully charged Note: The battery will not charge if you use the Installing the battery Your Kyocera KX5 phone comes with a removable lithium ion (LI Ion) battery. Fully charge the battery before using the phone. To install the battery: 1. Hold the phone face down. 2. Slide the tab at the bottom of the door up and remove the battery door. 3. Place the battery in the phone casing with the metal contacts facing the right side of the phone. 4. Replace the battery door by sliding the notches into the openings near the top of the phone. 5. Lower the battery door and slide the tab at the bottom of the door up and then down to secure the cover into place. phone while it is connected to an AC adapter. Recharging the battery You can safely recharge the battery at any time, even if it has a partial charge. Note: To remove the battery, make sure the phone is powered off. User Guide for the Kyocera Slider Remix KX5 Phone 1 Caring for the battery General safety guidelines · Do not take apart, puncture, or short-circuit the battery. · If you have not used the battery for more than a month, recharge it before using your phone. · Avoid exposing the battery to extreme temperatures, direct sunlight, or high humidity. · Never dispose of any battery in or near a fire. It could explode. Accessing keypad shortcuts Navigation key shortcuts From the home screen, press the navigation key in one of four directions to access three shortcuts and one custom menu (see page 40 for instructions on setting up your custom menu). Common causes of battery drain · · · · · Playing games or using the Web. Playing music files. Taking pictures and videos with the flash on. Keeping backlighting on. Operating in analog ( ) mode. Your phone switches between modes to find the best signal. To set your phone to operate in a single mode, select Menu Settings Network Digital/Analog. Music player shortcut From the home screen, press and hold Music Player screen appears. . The · Operating in digital mode when far away from a base station or cell site. · Using data cables or accessories. · Operating when no service is available, or service is available intermittently. · High earpiece and ringer volume settings. · Repeating sound, vibration, or lighted alerts. 2 Getting Started Getting to know your phone The phone is shown here in open position. You must slide your phone open to use the keys on the lower portion of the phone. When the phone is closed, the keys are locked to prevent accidental key presses. 1 2 3 Home screen. Left softkey accesses menus and functions. Send/Talk key starts or answers a call. Press once to activate 4 5 6 7 8 9 10 11 12 13 14 15 voice dialing, twice to display the Recent Calls list, and three times to redial the last number dialed. Speakerphone key activates the speakerphone and answers incoming calls. Keypad for entering numbers, letters, or symbols. * Shift key changes the text mode in text entry. Jack for AC adapter (included) and data cable (sold separately). Navigation key scrolls through lists and text entry fields and accesses shortcuts from the home screen. OK key selects a menu item or option. Press and hold to launch Music Player. Right softkey accesses the Contacts directory and other menu options. End/Power key turns the phone on and off, ends a call or browser session, and returns you to the home screen. Back key erases characters in text entry and returns you to the previous screen. Internal camera key activates camera/video mode. Space # key enters a space during text entry. Press and hold to activate or deactivate Silent mode. 0 Next key cycles through word choices during text entry. User Guide for the Kyocera Slider Remix KX5 Phone 3 16 17 Antenna does not extend. External camera key activates Camera mode. To activate Camera mode, press and hold until you hear one beep. Press and hold until you hear two beeps for Video mode. 18 TransFlash slot for external memory card. 19 20 21 22 23 24 25 Camera flash Jack for hands-free headset (sold separately). Mirror when taking your own picture. Volume key to raise or lower speaker volume. Press and hold up or down to activate/deactivate Silent Mode. Camera lens Speaker for ringers, speakerphone and music. Message Indicator Light 4 Getting Started Using menus The contents of the main menu are as follows: Recent Calls All Calls Incoming Calls Outgoing Calls Missed Calls Erase Call Lists Recent Calls Timer All Calls Timer Contacts View All Add New Find Name Speed Dial List Voice Dial List Messaging Groups Business List Personal List Information Messages New Text Msg New Pic Msg Voicemail InBox Browser Alerts* Sent OutBox* Saved Drafts Msg Settings Group Lists* Erase Messages Music Player Displays your music library (if music files are saved on an inserted memory card) Media Gallery Camera Pictures Images Sounds Videos Camera Launches the camera. Settings Silent Mode Keyguard Sounds Display Convenience Memory Card Voice Features Messaging Security Network Accessories USB Storage Tools & Games Brick Attack Race 21TM Voice Memo Scheduler Alarm Clock Tip Calculator Calculator Timer Stopwatch Web Browser Connects to Internet Phone Info Platform Your Number SW Version PRL Version Factory Config ESN Technology SID Browser Info Icon Key BREW Apps** *Not available on all phones. Check with your service provider. ** Menu name varies by service provider. Accessing menu items (slide open) · From the home screen, press Menu. to select · Press to select Contacts. · Press left, right, up, or down to see menus and options. · Press to select a menu item. · Press to back up a menu level. · Press to return to the home screen. In this guide, an arrow tells you to select an option from a menu. For example, Menu Settings means select Menu, then select the Settings option. Note: To change the way the menus appear, see "Choosing a menu view" on page 40 for details. User Guide for the Kyocera Slider Remix KX5 Phone 5 Performing basic functions Slide closed Note: The phone must be powered ON to perform the following functions. To... Make a call From the home screen... Press and hold to initiate voice dialing. Contact must have voice tag assigned (see page 61). Press Press Press Press Press . up or down. when you see OK. once. up and down. once. End a call Adjust volume during a call Acknowledge an alert Access menus Scroll menus Select menus Access Recent Calls List Activate Camera mode Take a picture Switch from Camera to Video mode. Record a video Access Music Player Highlight a menu or option and press Press and hold down. Press and hold the side camera key Activate Camera mode and press . . From Camera mode, press and hold the side camera key Activate Video mode and press Press and hold . . 6 Getting Started Slide open To... Turn the phone on Turn the phone off Make a call End a call Answer a call Access voicemail Verify your phone number Silence the ringer on an incoming call Activate voice dialing Launch the browser Record a voice memo Access Recent Calls list Access Music Player Take a picture Record a video From the home screen... Press and wait until the phone beeps. until the phone beeps. . Press and hold Enter the number and press Press Press . . Press and hold and follow the system prompts. Select Menu Phone Info. Press Press or then to answer. once and follow the prompts (see page 61). left. right. Press and hold Press and hold Press down. Press and hold Press camera key . . Focus on the image and select Capture. Press camera key . Select Options Video Mode. Focus on the image and select Record. To stop recording, select Stop. User Guide for the Kyocera Slider Remix KX5 Phone 7 Understanding screen icons These icons may appear on your phone's screen. The phone is operating in IS2000 (1X) digital mode. The phone is operating in IS95 digital mode. The phone is operating in Analog (FM) mode. The phone is receiving a signal. You can make and receive calls. Fewer bars indicate a weaker signal. A call is in progress. The phone is not receiving a signal. You cannot make or receive calls. The phone is roaming outside of its home service area. You have a text message. ( indicates the message is urgent.) You have a voice message. You have a voice/text message. The phone is in camera mode. Camera flash mode is ready. Camera timer mode is ready. Camera zoom mode is ready. The phone is in video mode. 8 The battery is fully charged. The more black bars, the greater the charge. The alarm clock is set. The phone is in privacy mode or is accessing a secure Web site. High-speed (3G) data service is available and active on your phone. Check with your service provider for availability. (blinking) The phone is sending highspeed data. (blinking) The phone is receiving highspeed data. High-speed data service is available, but the phone is dormant. The phone is at the home screen. To access Menu, press . The phone is at the home screen. To access Contacts, press . The phone is set to light up instead of ring. The phone is set to vibrate or to vibrate and then ring. Position location is set to your service provider and to emergency services. Position location is set to emergency services only. Getting Started 2 MAKING AND ANSWERING CALLS Ending calls using the slide You can set the phone to end calls immediately when you close the slide. · Select Menu Settings Convenience Close to End Enabled ­ Select Disabled to have the phone call continue when you close the slide. Making a call Make sure you are in an area where a signal can be received. Look for the symbol on the home screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to where the signal strength is better. When the phone has been idle for a time, it changes to power save mode. When you see "Power Save" on your phone's screen, press any key to return to normal operating mode. Answering a call When a call comes in, the phone rings, vibrates, or lights up, and a dancing phone icon appears. The phone number of the caller also appears if it is not restricted. If the number is stored in your Contacts directory, the contact name appears. Slide open · Press to answer the incoming call. -or· Press to answer the incoming call and turn on the speakerphone. Slide closed · Press to select Answer Call. Slide open 1. Open the slide. 2. Enter the phone number and press 3. Press . or close slide (if "Close to End" is enabled. See "Ending calls using the slide"). Slide closed You can only use the voice dialing feature when calling with the slide closed. Voice dialing requires that a contact be saved with a voice tag. See page 61. 1. Press and hold to initiate voice dialing. 2. Say the name of the contact when prompted. The phone places the call. 3. Press once. Answering calls using the slide You can set the phone to answer immediately when you open the slide. This feature does not apply to incoming data or fax calls. 9 User Guide for the Kyocera Slider Remix KX5 Phone · Select Menu Settings Convenience Open to Answer Enabled. ­ Select Disabled to have the phone continue ringing when you open the slide. 2. Scroll down the list to find the contact you want to call. 3. Highlight the name and press to dial the number. Adjusting the volume during a call · To adjust the earpiece volume during a call, press up or down. Using the speakerphone Your Kyocera KX5 phone has a built-in speakerphone. · To turn on the speaker, open the slide and press . If you press during an incoming call alert, you answer the call. The icon at the top of the phone screen indicates that the speakerphone is on. · To turn off the speakerphone, open the slide and press . Silencing an incoming call · Press or . Note: In the absence of voicemail, this feature drops the call. - or · Press then press to answer the call. This action silences the current call only. The next call will ring as normal. Setting the phone to hold calls The Hold Call feature allows you to place incoming calls on hold until you are ready to answer them. Note: This feature will not work if "Open to Redialing a number · To redial a recent call, press twice to open your Recent Calls list. Highlight a phone number or name and press . Tip: To redial the last number called, received, or missed, press three times. Answer" is enabled. See "Answering calls using the slide" on page 9. 1. Select Menu Settings Convenience Hold Call Enabled. Calling a saved number If you have already saved a phone number, you can use the Contacts list to find it quickly. 1. From the home screen, press to select Contacts. 10 ­ If you have not recorded a hold message, you will be prompted to record one, such as "Please hold. I'll answer in a minute." 2. Record the message twice, as prompted. Making and Answering Calls 3. Select Save or Options (Play, Re-Record, or Exit). Dealing with missed calls When you have missed a call, "Missed Call" appears on your screen unless the caller leaves a voicemail. · To clear the screen, press to select OK. · To view details of the call, press to select Calls then press . · To return the call, press to select Calls then press . The next time a call comes in, you will have the option of placing it on hold. Placing a call on hold You can place a call on hold once you have enabled this feature. Note: If you are already on a call and you receive another call, you cannot place the incoming call on hold. It will go to voicemail. 1. When a call comes in, press to select Hold Call. The caller will be placed on hold Setting missed call alerts You can set an alert to beep every five minutes after you have missed a call. 1. Select Menu Settings Sounds Alerts Missed Call Alert. 2. Select an option and press . and will hear your recorded hold message. 2. To speak to the caller, select Answer. - or To hang up without speaking to the caller, select End Call. Viewing recent call details Details on the last 60 calls you made, received, or missed are stored in the Recent Calls list and are identified by the following icons: Outgoing call Missed call (flashing) Incoming call Changing the hold message 1. Select Menu Settings Convenience Hold Call Re-Record Msg and follow the prompts. 2. Record the message twice. 3. Select Save or Options (Play, Re-Record, or Exit). Viewing recent calls 1. Select Menu Recent Calls. 2. Select a list: All Calls, Incoming Calls, Outgoing Calls, or Missed Calls. User Guide for the Kyocera Slider Remix KX5 Phone 11 3. Select a recent call item and press select Options: to 2. Select an option: All Calls, Incoming Calls, Outgoing Calls, or Missed Calls. 3. Press ­ Save adds the phone number to the Contacts list. ­ Send Msg sends a text message to the contact. ­ Send Pict Msg sends a picture message to the contact. ­ Erase erases the selected call record. Note: If the phone number has been classified as "secret," you must enter your four-digit lock code to view or edit it. For information on the lock code, see "Changing your lock code" on page 42. To classify a phone number as secret, see "Creating a new contact" on page 19. to select Yes. Speed dialing Before you can use speed dialing, you must save a phone number as a contact and assign a speed dial location to it. · To add a speed dial location to a saved or new contact, see "Customizing a phone number" on page 21. Using speed dialing To call a contact that has a speed dial location: · From the home screen, enter the one- or twodigit speed dialing location and press . Calling recent calls Slide open down. 2. Highlight the number you want to call and press . 1. Press 1-Touch dialing 1-Touch dialing is the fastest way to speed dial a contact that has a speed dial location. Note: You must (1) enable 1-Touch dialing on Slide closed 1. Select Menu Recent Calls Outgoing Calls. 2. Highlight the number you want to call and your phone and (2) have a speed dial location assigned to a contact. See "1-Touch dialing" on this page. press . Enabling 1-Touch dialing · Select Menu Settings Convenience 1-Touch Dialing Enabled. Erasing recent calls 1. Select Menu Recent Calls Erase Call Lists. 12 Making and Answering Calls Using 1-Touch dialing To call a contact that has a speed dial location: · From the home screen, press and hold the speed dialing number. If it is a two-digit number, press the first digit briefly, then press and hold the second digit. For example, if the speed dialing location is 15, press briefly, then press and hold . If you see "New Messages" Slide open or closed 1. Press to select Call, which initiates a call to your voicemail number. 2. Follow the prompts to retrieve the message. To clear the screen without checking messages: · Press to select Ignore. Setting up voicemail Before your phone can receive voicemail messages, you must set up a password and record a personal greeting with your service provider. When you have set up your voicemail, all unanswered calls to your phone are automatically transferred to voicemail, even if your phone is in use or turned off. 1. From the home screen, press and hold . 2. Press at the message. 3. Follow the system prompts to create a password and record a greeting. Note: If you are having trouble accessing your If you see only the symbol Slide open 1. Press and hold to initiate a call to your voicemail number. 2. Follow the prompts to retrieve the message. · You can set the phone to beep or vibrate every five minutes to remind you that you have voicemail. See "Setting message alerts" on page 39. Calling emergency services Note: Regardless of your 3-digit emergency code voicemail, contact your service provider. Checking voicemail messages When a voice message is received, your screen displays "New Messages" along with the symbol at the top of your screen. The symbol flashes if the message is urgent. (911, 111, 999, 000, etc.), your phone operates as described below. · Dial your 3-digit emergency code and press . You can call the code even if your phone is locked or your account is restricted. When you call, your phone enters Emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode. 13 User Guide for the Kyocera Slider Remix KX5 Phone To exit Emergency mode When you have completed the emergency call: 1. Press to select Exit. 2. Press again to confirm your choice. Note: To determine who has access to your Receiving data or faxes Your phone may be able to receive certain data or faxes, depending on the system sending the information. For more information, see page 44. location, see "Setting position location" on page 45. Understanding roaming Controlling network roaming Depending on services available from your service provider, you may set the phone to either digital or analog mode. This is useful if you are in an area that borders on digital service and the automatic feature is causing the phone to keep switching between modes. 1. Select Menu Settings Network Digital/Analog. 2. Select an option and press Tracking calls You can track the number and duration of calls made and received on your phone. 1. Select Menu Recent Calls. 2. Select a timer: ­ Recent Calls Timer tracks all calls you have made and received since you last reset this timer. To reset this timer to zero, press to select Reset. ­ All Calls Timer tracks all calls you have made and received. This timer cannot be reset. Timing your calls You can set your phone to beep 10 seconds before each minute passes when you are on a call. · Select Menu Settings Sounds Minute Alert Enabled. . ­ Automatic automatically switches the phone between digital and analog. ­ Analog only sets the phone to work in analog mode only. ­ Analog call forces a call into analog mode for the duration of the next call. ­ Digital only sets the phone to work in digital mode only. 14 Making and Answering Calls Setting an alert for roaming You may use this setting if you want the phone to alert you when you roam outside of your home service area. 1. Select Menu Settings Network Roam/Svc Alert. 2. Select an option and press Setting Call Guard You can set the phone to warn you before you answer or place a call while roaming. · Select Menu Settings Convenience Call Guard Call prompt. ­ The phone now emits a distinctive roam ring to indicate when you are roaming during calls. ­ To accept or place a call while roaming, you must press . Note: Call Prompt is disabled when the phone is . ­ When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again. ­ On roam change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again. ­ On any change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service. in Emergency Mode. Setting the roam ringer You can set a ringer to indicate when an incoming call will be subject to roaming charges. · Select Menu Settings Sounds Roam Ringer Enabled. User Guide for the Kyocera Slider Remix KX5 Phone 15 3 ENTERING LETTERS, NUMBERS, AND SYMBOLS Entering numbers · To enter a number while in mode, press a number key once. · To enter a number while in or mode, press and hold a number key until the number appears on the screen. You can enter letters, numbers, and symbols in contacts, text messages, and your banner. Understanding text entry screens The current text entry mode (and capitalization setting, when applicable) are indicated by icons. characters remaining text entry fields capitalization setting text entry mode Entering words letter by letter 1. Press a key once for the first letter, twice for the second letter, and so on. If your phone is set to Spanish, French, or Portuguese, accented letters are available. 2. Wait for the cursor to move right and enter the next letter. Note: To enter a space, press Text entry modes There are five text entry modes: Case change Numbers only Normal alpha Rapid Entry Add Symbol Add Smiley Note: The mode you start in depends on the task . Entering words quickly When you press a series of keys using mode, checks its dictionary of common words and guesses at the word you are trying to spell. 1. For each letter of the word you want, press the key once. For example, to enter the word "any" press . 2. If the word doesn't match what you want, press to look at other word matches. 3. When you see the word you want, press . you are doing. For example, when entering a phone number, you're in number mode. When entering a name for a contact, you're in normal text mode. See "Changing modes" on page 17. 16 Entering Letters, Numbers, and Symbols Entering symbols While entering text, you can enter symbols by pressing until you see the symbol you want. Using this method, you have access to the following symbols: . @? ! - , & : ` 1 To access the full set of symbols: 1. From the text entry screen, select Options. 2. Select Add Symbol. 3. Press down to view the list of symbols. 4. Press the number key corresponding to the symbol you want. Changing modes Sometimes you need to change modes. For example, to enter numbers in an email address while in mode, you must change to mode, enter the numbers, and then change back to mode to complete the address. To change text entry modes: · Press and hold until the icon for the mode you want appears at the top of the screen. -or· Select Options then select a different mode. Entering smileys 1. From the text entry screen, select Options. 2. Select 3. Press Add Smiley. Capitalization settings You can change capitalization at any time while entering text. Simply press to choose upper or lower case while in Normal Alpha mode. down to view the list of smileys. 4. Press the number key corresponding to the smiley you want. Switching default text entry modes You can change the default text entry mode when creating a text message. This setting applies only to the message body screen, not the "To" screen. 1. Select Menu Messages Msg Settings Default Text. 2. Select Normal Alpha or Rapid Mode. User Guide for the Kyocera Slider Remix KX5 Phone 17 Quick reference to text entry This table gives general instructions for entering letters, numbers, and symbols. To... Enter a letter Enter a number Enter a symbol Enter a smiley Enter a space Erase a character Erase all characters Move the cursor right or left Move the cursor up or down Change text entry modes Capitalize any letter Lowercase any letter Select soft options on the screen Highlight an option at the bottom of the screen Do this... Use mode and press a key until you see the letter you want. For more information, see page 16. Use mode and press a key once to enter its number. For more options, see page 16. Press until you find the symbol you want. See page 17. Use mode and press a key once to enter its number. For more options, see page 17. Press Press . . . Press and hold Press Press right or left. up or down. . Press and hold In In mode, press mode, press . Choose . Choose or . . . Press the appropriate key, Press right or left. 18 Entering Letters, Numbers, and Symbols 4 STORING CONTACTS Adding a code or extension When you save the phone number of an automated service, you may include a pause to stop dialing, for example, where you would wait to dial an extension. 1. From the home screen, enter the first portion of the phone number. 2. Press to select Options. 3. Select a type of pause: ­ Time Pause ­ Hard Pause 4. Enter the remaining numbers. 5. Press to select Save. X Use your phone's Contacts directory to store information about a person or company. Each contact entry can have up to six phone numbers, two email addresses, two Web addresses, two street addresses, and a space for notes. Creating a new contact 1. From the home screen, enter the phone 2. 3. 4. 5. number you want to save, including the area code. Press to select Save. Press to select Save New Contact. Enter a name for the contact. ­ If you need to learn how to enter letters, see "Understanding text entry screens" on page 16. ­ To add a symbol or smiley to the contact name, or to change the text entry mode, press to select Options. Either save now or add more contact information. ­ To save now, press to select Save. ­ To enter additional phone numbers, email and Web addresses, or notes, press down repeatedly. For help switching between numbers and letters for email or Web addresses, see "Changing modes" on page 17. Customizing your contacts You can customize each contact in your Contacts directory by assigning ringers, pictures, and number types, or by classifying your contacts as Personal or Business. Assigning ringers 1. Press to select Contacts. . to 2. Highlight a contact and press 3. Highlight the contact name and press select Options. 4. Select Ringer Assign Ringer. User Guide for the Kyocera Slider Remix KX5 Phone 19 5. Scroll down the list to hear the different Assigning number types When you assign a number type, an icon is placed in front of a contact number to specify the type of number, such as work, home, or mobile. 1. Press to select Contacts. 2. Highlight a contact and press . 3. Highlight the contact number and press to select Edit. 4. Press down once and press to select Options. 5. Highlight an option to designate the number as General, Work, Home, Mobile, Pager, or Fax and press . The associated icon will ringers and press to select one. Assigning pictures 1. Press to select Contacts. . to 2. Highlight a contact and press 3. Highlight the contact name and press select Options. 4. Select Picture Assign Picture Images. 5. Select Saved Images, Wallpapers, or Caller IDs. Note: With mobile PhoneTools for Kyocera, you can transfer digital pictures to your phone. To purchase MPT or other accessories, visit www.kyocera-wireless.com/store. 6. Scroll through the list to view your options appear next to the number in your Contacts directory and Recent Calls list. work home mobile pager fax to email address street address Web page URL note and press to assign it to your contact. Classifying contacts as Personal or Business 1. Press to select Contacts. 2. Highlight a contact and press . 3. Highlight the contact name and press select Options. 4. Select Classify. 5. Select Personal or Business and press "Assigning business and personal ringers" on page 37. 20 Editing a contact 1. Press to select Contacts. . . 2. Highlight a contact and press Note: To assign Personal or Business ringers, see 3. Highlight the contact name or number and press to select Edit. 4. Enter your changes and press Save. to select Storing Contacts Erasing a contact 1. Press to select Contacts. . 2. Highlight the contact to erase and press 3. Select Options. 4. Highlight Erase Contact and press 5. Press . to confirm. Sending a vCard You can send contact information as a text messages. 1. Press to select Contacts. 2. Highlight the contact to send as a vCard and press . 3. Press to select Options. 4. Highlight Send as vCard and press . 5. Enter a recipient's phone number and press to select Send. Customizing a phone number 1. Press 3. Press to select Contacts. . down to highlight the contact to select Options. 2. Highlight the contact to edit and press number. 4. Press 5. Highlight an option and press : ­ Call to call the contact. ­ Send Text Msg brings you to the text messaging screen. ­ Send Pict Msg brings you to the picture messaging screen. ­ Add to Speed Dial assigns or removes the speed dial location. ­ View Number to see the selected phone number. ­ Erase Number erases the number from the contact. ­ Secret makes the number secret so that it will not appear on the screen until the lock code is entered. Secret numbers can be called without a lock code. (For more information, see "Limiting calls" on page 43.) ­ Primary Number makes this number the first one that shows up when you open the contact. ­ Add Voice Dial to record a voice tag so you can call a contact using voice recognition (VR). For more information, see page 61. ­ Erase Voice Dial erases the voice tag associated with the number. ­ Edit Voice Dial records a new voice tag. 6. Enter the new information and follow the prompts. 7. Select Save, if necessary. User Guide for the Kyocera Slider Remix KX5 Phone 21 Finding contact information To find a phone number or contact, you can (1) check the Frequent list, (2) search the Contacts directory, or (3) use Fast Find. ­ To call the contact, highlight the number and press . Setting Fast Find With Fast Find, you press one or two keys to view close matches of the number you are looking for. · Select Menu Settings Convenience Fast Find Enabled. Checking the Frequent List From the home screen, select Contacts. The last 15 of your most frequently called contacts appear when the Frequent List is enabled. Scroll past the double line to view the All Contacts list. To enable the Frequent List setting · Select Menu Settings Convenience Frequent List Enabled. Using Fast Find 1. From the home screen, press the keys Searching the Contacts directory 1. Select Contacts for a list of all contacts. To quickly get down the list, enter the first letter of the contact. The menu skips to that letter of the alphabet. - or Select Menu Contacts. 2. Select a search method: ­ View All lists all saved contacts. ­ Find Name locates a specific name. Enter part of the contact name then select Find. ­ Speed Dial List, Voice Dial List, Messaging Groups, Business List, or Personal List selects a contact from the specified list. 3. Highlight a contact and press . corresponding to the letters of the name you want to find. A matching contact or speed dial entry appears. 2. Press down to scroll through matching entries. 3. Highlight the name you want then press to call the number. 22 Storing Contacts 5 USING THE CAMERA Slide open · Press until you hear one beep to activate camera mode. · Press until you hear two beeps to activate video mode. Tips before operating your camera · You cannot activate the camera while on an active call or while browsing files in the media gallery. · Once the camera is active, the home screen acts as the viewfinder. · If you get a "Low memory" error, check your resolution and quality compression settings. See "Setting up the camera" on this page. · If there is no activity within 45 seconds after you turn your camera on, the camera quits and returns to the previous launch point. · Menu settings and options can only be accessed when the camera is active. Setting up the camera for photos 1. With the slide open, select Menu Camera. 2. Press 3. Press Accessing camera and video modes The camera can be used with the slide open or closed. Slide closed · Press until you hear one beep to activate camera mode. · Press until you hear two beeps to activate video mode. to select Options . to select Settings. 4. Highlight an option and press : ­ Flash options are On, Off, or Automatic. ­ Resolution options are 1280 x 960 (best for printing), 640 x 480, 320 x 240 (best for sending to email), and 160 x 120. ­ Low Light Mode brightens the picture for low light environments. ­ Self Timer options are Off (default) or 3, 5, or 10 second pauses. When set, the camera beeps from 3 seconds down to the time the shutter snaps the picture automatically. Self Timer is not available when Multishot mode is activated. User Guide for the Kyocera Slider Remix KX5 Phone 23 ­ Multishot allows you to take up to six multiple pictures while the camera key is pressed and held. A tone will play each time a picture is taken. A second tone will play when the final picture is taken. ­ Shutter Sound sets the sound used when the camera takes a picture. ­ White Balance allows the camera to adjust for different lighting. Options are Automatic, Fluorescent, Incandescent, or Daylight. ­ Quality sets the picture compression. The higher the compression, the better the detail of the picture (higher pixel rate). Options are Low, Medium, or High (default). When set to High, the picture file size is larger, using more memory. ­ LED flashes a light to indicate a picture has been taken. Options are On (default) and Off. ­ Viewfinder options are Fullscreen and Actual. ­ Save Location options are Save to Card and Save to Phone. The following settings remain at the setting you selected each time you enter and exit the camera application: ­ Flash, Resolution, Shutter Sound, White Balance, Quality, LED, and Save Location. Menu options for camera mode or to activate camera mode. Press and hold or to activate video mode. 2. Select Options. 3. Press up or down to scroll through the options on the vertical menu bar: ­ Settings displays available camera settings you may set up prior to taking a picture. ­ Video Mode toggles between video and camera modes. ­ Brightness allows you to adjust the brightness of the image in the home screen LCD. ­ Camera Pictures displays all pictures taken and stored. ­ Last Picture displays the most recently taken picture. ­ Frames allows you to add a frame or a stamp to your picture. A frame or stamp cannot be removed once it has been used in a picture. 1. Press