User manual LA CROSSE TECHNOLOGY K3-100

K3-100 Max X'treme Instruction Manual K3-100 K3-100 temperature, barometer, altitude.) K3-100 K3-100 K3-100 [Mode] [Select] [Mode] K3-100 K3-100 K3-100 K3-100 pacer in a sleek water resistant case. K3-100 Store your La Crosse Technology K3-100 wrist watch in a dry K3-100 place when not in use [Select] [Mode] [Mode] K3-100 [Select] [Mode] [Mode] Mode Button Select Select Button Time Mode and Current 4.1 [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] 4.2 [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [Mode] [mode] [mode] K3-100 [ MODE ] [ MODE ] [ MODE ] [ MODE ] [ MODE ] [ MODE ] [ MODE ] 5 K3-100 [ MODE ] K3-100 6 1, 3, 5, 10, 15 and 45 Minutes. K3-100 The pacer will generate beeps at a pre-defined beeping rate. The beeping rate can be set [ Mode ] [ Mode ] from 30 to 180 beats per minute(BPM) in step of 5. USING THE PACER In current time mode, press [M] until PACER is displayed. Press the [S/S] button to start the pacer. The step counter "St" will run in the middle of the display (max 99999steps) Press the [S/S] button to stop the pacer. To reset the step counter, press and hold the [L/R] button when the pacer was stopped. HOW TO SET THE BEEPING RATE Press and hold the [M] button for 2 seconds in Pacer Mode. When the beeping rate digits start to flash, press the [S/S] or [L/R] button to increase/ decrease the number. (Hold down the button to change the number at a higher speed). When the setting is completed, press and hold the [M] button to exit the setting display. [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] 9.0 five (5) [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] 10.0 three(3) K3-100 , Sea Level Pressure and History. [Select] button twice to enter the Barometer mode. 10.1 [ Mode ] K3-100 10.3 [ Mode ] [Mode] [Mode] [ Mode ] [ Mode ] [ Mode ] [Mode] [ Mode ] [ Mode ] [ Mode ] 10.2 11.0 [ Select ] K3-100 K3-100 K3-100 [ Select ] one to [ Mode ] 11.1 [ Mode ] [ Mode ] 11.3 [ Mode ] [ Mode ] K3-100 [ Mode ] K3-100 [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] 11.2 11.4 K3-100 [ Mode ] [ [Mode]] Mode [Mode] [ Mode ] [ Mode ] [ Mode ] [ Mode ] [ Mode ] K3-100 11.5 [ Mode ] [Mode] [ Mode ] [ Mode ] [Mode] [ Mode ] K3-100 -702m to 9164m (-2306ft to 30065ft) Assuming sea Up to 10m (30 feet) K3-100 5 seconds EL backlight operation per day 300 hPa/mbar to 1100hPa/mbar (8.85 inHg to 32.48 inHg) 6 Quick-Set-Values (1, 3, 5, 10, 15, and 45 minutes)