Alarmed Concealed Wall Mounted Unit Model 892NAL Alarmed, flush mounting provides maximum clearance, enhanced appearance and security. SPECIFICATIONS: Alarm feature with re-set button will sound when there is movement on belt. Speaker on mounting plate. Dimensions: 4.85" High X 3.55" Wide x 4" Deep Belt: 7.5 ft also available in 894NAL model with 13ft. belt Belt Width: 2 inches Finishes: Available in black, other colors available as custom Belt Color: Choice of 30 colors, also available with custom printed messages ADDITIONAL FEATURES: 1. Ideal for restricted areas. 2. Alarm automatically sounds whenever unauthorized disengagement occurs. 3. Non-battery operated, plugs right into main wires. 892NAL Lawrence Metal Products Inc. · 800.441.0019 · 631.666.0300 · Fax: 631.666.0336 · www.lawrencemetal.com e-mail: service@lawrencemetal.com · PO Box 400-M · 260 Spur Drive South, Bay Shore, New York 11706-0779 USA 892NAL/894NAL How to Install an Alarmed Concealed Wall Mounted Unit Model 892NAL TOOLS REQUIRED: · None To Install 1) Cut hole to the dimensions shown 2) Ensure that there is sufficient clear space to accommodate the unit fully behind the hole 3) Connect switch and power and carefully insert into the hole 4) Ensure unit is square, and secure 4 screws To Connect Unit 1) Connect switch cables to terminals 1& 2 2) Connect transformer by connecting red cable to terminal 5 (+ volts) and white or black to terminal 6 (0 volts) To Activate Unit 1) Turn power supply on, Red LED will flash for up to 30 seconds to allow belt to be extended and attached 2) Once Set, LED will remain on constantly 3) Any motion of the belt in excess of 2 inches will activate the alarm 4) To cancel alarm and reset the unit press the rest button Lawrence Metal Products Inc. · 800.441.0019 · 631.666.0300 · Fax: 631.666.0336 · www.lawrencemetal.com e-mail: service@lawrencemetal.com · PO Box 400-M · 260 Spur Drive South, Bay Shore, New York 11706-0779 USA 892NAL/894NAL ...