Fixed TensaBarrier® Post TOOLS REQUIRED: Outdoor Installation (Concrete) · 5/8" Expansion Shields, 5/16" bolt · Drill with 1/4" & 5/8" carbide tipped drill bits · Pencil/Marker Indoor Installation (Carpet/Wood) · 1 1/2" x 14 wood or chrome screws · Phillips Head Screwdriver INSTRUCTIONS: OUTDOOR (CONCRETE) INSTALLATION: Step 1 Mark three holes on the floor thru the 5" flange where post should be mounted. Step 2 Drill three 1/4" pilot holes followed by 5/8" dia. holes to the depth of the shields Step 3 Bolt thru flange and into shield to fasten post to floor INDOOR (CARPET/WOOD) INSTALLATION: Step 1 Position post in desired location Step 2 Remove carpet and padding under flange. Cover frayed ends with flange Step 3 Secure Post by drilling screws thru 5" dia. flange Note: These fastening procedures and products have been found to be effective in a wide variety of applications, however as always, we recommend that the installer assess the application of the product, flow patter of expected traffic, and the specific flooring composition to properly select the appropriate fastening system Expansion shields Screws Lawrence Metal Products Inc. · 800.441.0019 · 631.666.0300 · Fax: 631.666.0336 · www.lawrencemetal.com e-mail: service@lawrencemetal.com · PO Box 400-M · 260 Spur Drive South, Bay Shore, New York 11706-0779 USA ...