Table of Contents Important Safety Instructions ............................................................................. 2 View of Unit .......................................................................................................... 4 Installing the DVD Module................................................................................... 7 Disc Information................................................................................................... 8 Remote Control .................................................................................................... 9 System Connections ......................................................................................... 13 Connecting to Power Supply................................................................................ 13 Connecting to an External AV Signal Source (Composite/S-Video) ..................... 13 Connecting to an External AV Signal Source (YPbPr).......................................... 14 Connecting to an HDMI Signal Source ................................................................ 14 Connecting to a PC.............................................................................................. 15 Connecting to a SCART signal source................................................................. 16 Connecting to TV Signal ...................................................................................... 16 Source Selecting................................................................................................ 17 TV Function ........................................................................................................ 18 Preparation .......................................................................................................... 18 Video Setting........................................................................................................ 18 Audio Setting........................................................................................................ 20 Misc Setting ......................................................................................................... 21 TV Setting ............................................................................................................ 23 Geometric Setting (VGA mode only) .................................................................... 26 NICAM Function ................................................................................................. 28 TELETEXT Function .......................................................................................... 29 DVD Playback Operation................................................................................... 30 USB and SD/MS/MMC Card Function............................................................... 35 DVD System Setup............................................................................................. 36 Troubleshooting................................................................................................. 44 Specifications..................................................................................................... 45 -1- Important Safety Instructions This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit. This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance. Caution: Laser radiation when open. Do not stare into beam. Caution: use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. Caution 1. The product contains a low-power device. In order to ensure the safety of the laser device, do not remove any cover and attempt to repair the unit. If any service is needed, please contact the distributor or its authorised service centre. 2. To reduce the risk of electric shock, do not remove the cover (back). No user-serviceable parts inside. Refer servicing to qualified service personnel. Unplug the product from the wall outlet before servicing or when it is unused for a long period of time. 3. The manufacturer will not be held responsible for the damage caused by any substitutions and modification of the product without authorisation from the manufacturer's or authorised service agent. WARNING The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorised by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineering or disassembly is prohibited. -2- Important Safety Instructions 1. Read these instructions 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. 8. Install according to the manufacturer instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Read, heed and follow all instructions to ensure correct and safe installation and interconnection of the apparatus; 10. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 11. The mains socket-outlet shall be installed near the apparatus and the mains plug shall remain readily operable. 12. Protect the power cord from being walked on or pinched particularly at plugs, power sockets, and the point where they exit from the apparatus. 13. Only use attachments/accessories specified by the manufacturer. 14. Use only with stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 15. Unplug the apparatus during lightning storms or when unused for long periods of time. 16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the back cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. Note: Do not touch the colour TFT LCD screen directly by hand. The images in this manual are for reference only and may differ from your model. -3- View Of Unit Front and Right View 1. Color TFT screen Color TFT screen to clearly show the data. 2. Disc Tray Slot Insert a disc into this slot. 3. USB Port To connect an external USB device. 4. SD/MS/MMC card port Insert an SD/MS/MMC card into this slot. 5. PLAY button In DVD mode, press this button to play the disc. 6. STOP button In DVD mode, press this button once to stop playback, and then press the PLAY button to resume normal playback. Press this button twice repeatedly to stop completely. 7. EJECT button In DVD mode, press this button to eject the disc. 8. CH / button In TV mode, press this button to select channels. In setup menu, the same function as the direction buttons. -4- View Of Unit Front and Right View 9. VOL / button Press this button to decrease or increase the volume. In setup menu, the same function as the /direction buttons. 10. POWER button Press this button to enter or exit the standby mode. 11. MENU button Press this button to enter or exit system setup menu. 12. SOURCE button Press this button repeatedly to select the input mode, choose from: TV, SCART, Composite, S-Video, YpbPr, VGA, HDMI and DVD. 13. Remote Sensor 14. Power Indicator The light is blue while the system is active and red while the system is in standby. 15. Speakers NOTE: The " STOP", " PLAY", " EJECT" buttons are only available when the DVD module is installed. -5- View Of Unit Rear View Open the back cover on the right side of the unit's rear panel and all the connecting jacks will appear, as shown on the below figure: 1. VIDEO/S-VIDEO and L/R audio Input Jacks To connect an audio and video/S-Video signal source in Composite/S-Video mode. Video and S-Video share L/R audio jacks and S-Video has the priority. 2. SCART Jack To connect a SCART signal source. 3. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks To connect a Y/Pr(Cr)/Pb(Cb) signal source in YPbPr mode. 4. Power Supply Cord To connect the power supply. 5. VGA Input Jack To connect a VGA signal source in VGA mode. 6. TV Signal Input Jack To connect a TV antenna or analog cable in TV mode. 7. HDMI Jack To connect an HDMI signal source. -6- Installing the DVD Module This TV set comes equipped with a removable DVD module. Please follow the procedures below to remove or install the DVD module, this is for service purpose only. Note: Before removing or installing the DVD module, ensure that the television is turned off and that the main plug is removed from the wall socket. DVD module removal: Refer to the illustration below and follow the procedures below to remove the DVD module from the unit: 1. Loosen the screw on the DVD module. 2. Carefully slide the DVD module along the rails and unplug the connecting cord from the LCD TV. 3. Slide the DVD module along the rails to fully remove the DVD module. DVD module installation: 1. 2. Plug the connecting cord into the DVD module. Carefully slide the module into the desired position and lock the module with one screw. -7- Disc Information Discs Supported DISC LOGO CONTENTS Audio+Video (active picture) SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) DVD 12cm CD Audio 12cm 74min JPEG Still high resolution 12cm MP3 Audio 12cm MPEG 4 Audio+Video (active picture) 12cm Operating systems and features of individual DVD discs are specified by the software maker. Please refer to the instructions accompanying the disc. About Disc Terms Titles A DVD disc is often divided into TITLES. A title can be a separate item or a segment of a film. On many discs the ROOT menu and the TITLE menu are the same. Chapters Each TITLE is subdivided into CHAPTERS and each chapter is numbered for easy searching. So by knowing the right command, you can play the whole disc, or any part of the disc. Tracks Picture and music CDs are divided into TRACKS. Each track is numbered for searching. -8- Remote Control Preparation of the Remote Control Softly push the clip of the back cover to open the battery compartment. Using of the Remote control Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. · The operating distance may vary depending on the brightness around. Notes: · Do not point bright lights directly at the remote control sensor. Under normal use the battery will last for six months. Take out the batteries when the remote is not in use for a long time. · · Do not place objects between the remote control unit and the remote control sensor. Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment. -9- Remote Control Remote Control Drawing 4. ASPECT button Press to select the picture size: choose from Auto, Full and 4:3. 5. SLEEP button Press repeatedly to select the sleep time and Off. 6. 0~9 Number buttons Press to select numbers. 7. button In TV mode, press to return to the channel last viewed. 8. PICTURE button Press to select the video display mode: choose from User, Cinema, Normal, Vivid, and Hi-Bright. 9. VOL +/- button Press to increase or decrease the volume. 10. MUTE button Press to turn on or off the speaker output. 11. INPUT button Press repeatedly to select the input source, choose from: TV, SCART, Composite, S-Video, YPbPr, VGA, HDMI and DVD. 12. Direction buttons () In the setup menu, press the button to select the desired items, press the button to adjust or set. 13. OK button Press to confirm selection in setup menu. 14. AUTO ADJUST button In VGA mode, press to start auto-adjusting. 15. 1. POWER button Press to enter or exit the standby mode. 2. TV button Press to enter TV mode. 3. DVD button Press to enter DVD mode. 16. PLAY button In DVD mode, press to play the disc. PAUSE button In DVD mode, press to pause the playback. Press it again to resume normal playback. - 10 - Remote Contr ...