Digital Mini Component System ( RADIO CASSETTE RECORDER CD/MP3 PLAYER with USB/SD/MMC card system) Digitales Mini-Komponenten-System ( RADIO KASSETTEN RECORDER CD/MP3-SPIELER mit USB/SD/MMC-Kartensystem) Mini Chaîne numérique (RADIO-CASSETTE ENREGISTREUR LECTEUR CD/MP3 Av e c ca r t e s y s t è m e U SB/ SD / M M C) Sistema digital de minicomponentes ( RADIO CASETE Y REPRODUCTOR DE CD/MP3 con sistema de tarjeta USB/SD/MMC) Digitaal mini-audiosysteem ( RADIOCASSETTERECORDER CD/MP3 SPELER met USB/SD/MMC kaartsysteem) Model: MC-133 User s Guide Benutzerhandbuch M o d e d Em p lo i Guía de usuario Gebruiksaanwijzing LOCATION OF CONTROLS ENGLISH IMPORTANT SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This lightning flash with arrowhead sym bol, within an equilateral triangle, is intended to alert the user to the presence of insulated dangerous voltage within the products en closure that m ay be of sufficien t m agnitude to constitute a risk of electric shock presents Warning: to reduce the risk of electric shock, do n ot rem ove cove r ( o r b a ck ) n o u s e r s er vicea b le p a r t in s id e. Refer s er vicin g t o q u a lified service personnel. The exclam ation point within an equilateral triangle is intended to alert the user to the presen ce of im portant operating and m aintenan ce (servicing) instructions in the literature accom panying the appliance. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the m anufactures instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where the exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug the apparatus during lightening storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been dam aged in any way, such as power supply cord or plug is dam aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This appliance shall not be exposed to dripping or splashing water and that not object filled with liquids such as vases shall be placed on apparatus . E-1 NAMES OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. SPEAKERS (L & R) FUNCTION SWITCH PHONES JACK CD RANDOM/RDS BUTTON CD REPEAT/PTY BUTTON EQUALIZER BUTTON POWER ON/OFF BUTTON USB INDICATOR STANDBY INDICATOR LCD DISPLAY CD COMPARTMENT REMOTE SENSOR VOLUME UP/DOWN CONTROL CD PLAY/PAUSE BUTTON CD SKIP UP/ DOWN /RADIO TUNING UP/DOWN CONTROL 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. CD STOP BUTTON USB PORT CASS. PAUSE KEY CASS. STOP/EJECT KEY CASS. FAST FORWARD KEY CASS. REWIND KEY CASS. PLAY KEY CASS. RECORD KEY CASSETTE COMPARTMENT SPEAKER CONNECTORS CD ESP/FIND BUTTON AC POWER PLUG BAND SWITCH FM ANTENNA WIRE SD/MMC CARD SLOT REMOTE CONTROL 1. 2. 3. 4. 5. 6. POWER SWITCH MEMORY BUTTON (CD & RADIO) MEMORY UP BUTTON VOLUME UP/DOWN BUTTON CD PLAY/PAUSE BUTTON CD SKIP NEXT/TUNING UP BUTTON 7. 8. 9. 10. 11. 12. CD STOP BUTTON FUNCTION BUTTON MEMORY DOWN BUTTON CD SKIP BACK/TUNING DOWN BUTTON MUTE BUTTON BATTERY COMPARTMENT INTRODUCTION Thank you for purchasing this product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference. CAUTION: Do not block the ventilation openings or holes. Do not place any naked flame sources, such as lighted candles, on the apparatus. Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. NOTE: The m anufacturer is not responsible for any radio or TV interference caused by unauthorized modifications could void the user's authority to operate the equipment. IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1. CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE E-2 2. WARNING LABEL, PLACED INSIDE THE UNIT CAUTION: Do not open the unit. There are no user serviceable parts inside the unit; consult all servicing to qualified service personnel. D is cs fo r Playback This system can playback all digital audio CD, finalized digital audio CD-Recordable (CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA form at digital audio CD/ CD-R/ CD-RW discs. POWER SOURCE This unit is designed to be operated on AC. Plug the power cord into standard household AC wall outlet. BASIC FUNCTION SWITCHING ON THE UNIT Note: Before switching on the unit, Please make sure that all connections have been got ready. Press the POWER ON-OFF button, the LCD display will illum inate and show HELLO moving. Press FUNCTION switch to select playing mode (CD/TUNER/TAPE/USB-CARD). TO ADJUST VOLUME Press and/ or hold the electronic VOLUME UP/ DOWN CONTROL to increase or decrease volume. Press MUTE button on remote control to switch off the sound. Press again to turn on. HEADPHONES For private listening, plug the headphones/ earphones (not included) into PHONES jack (3.5 mm diameter). CAUTION: Long tim e listening with headphones/ earphones at high volum e m ay cause harm ful dam age to users ears. USING THE RADIO TUNING IN RADIO STATIONS 1. Press the FUNCTION switch to select RADIO mode, the display will show TUNER . 2. Press the BAND switch to select the desired wave band: AM(MW)/FM/ FM ST.. 3. Tune to desired station by pressing the TUNING CONTROL/ CD SKIP UP/ DOWN CONTROL, the display will show the band frequency. Example: FM 97.10 MHz 4. Adjust the ELECTRONIC VOLUME CONTROL to desired volume level. 5. Extend ANTENNA WIRE to its full length if you are listening to FM broadcasting. Gently rock the unit back and forth to get the best reception when you are listening to AM programme, or place the unit in an open location. Note: When you are receiving FM stereo programme, the display will show ((ST)). 6. Turn off the radio, press the FUNCTION switch to enter CD or TAPE operation, or switch off the unit by pressing POWER ON/OFF button (the display will say GOOD BYE to you). RADIO AUTO SCAN (SEARCH) Press and hold the TUNING UP/ DOWN CONTROL/ CD SKIP UP/ DOWN CONTROL for 1 or 2 seconds and release, the unit will auto scan until searched a strong signal program me. Press and hold again to search other stations. E-3 RDS(RADIO DATA SYSTEM) OPERATION Press the FUNCTION button to select TUNER m ode, press RANDOM/ RDS button, PS shows on the display, and the broadcasting station name and details also appear on the display. Note: If no RDS signal received, the display will show NO PS. PTY OPERATION Press the FUNCTION button to select TUNER m ode, press REPEAT/ PTY button, PTY shows on the display, and the broadcast program type appears on the display. Each tim e you press, the display will show a category for different style broadcasting program. Note: If no RDS signal received, the display will show NO PTY. RADIO STATION MEMORY OPERATION You m ay pre-store 10 for AM and 30 for FM radio stations in m em ory for your preference controlled by rem ote handset, so as you can listen to your desired station directly and quickly, no need to tuning and search for. 1. Set the unit to TUNER mode. 2. Press BAND button to select band (AM or FM), Tune into a station. 3. Press MEMORY button, MEMORY shows on the display. then press M (m em ory) UP or M(memory) DOWN button to select the first storing location. 4. Press MEMORY button again to store. 5. Search another station, repeat steps (3) & (4) until all desired stations stored. Up to 40 stations can be programmed( 10 for AM and 30 for FM). 6. Press M (memory) UP or M (memory) DOWN button to listen to the stored station directly. USING THE CASSETTE Note: Before starting to operate cassette, rem ember to flip over the cassette cover which hides all cassette keys in front panel. UNDERSTANDING THE BUTTONS RECORD - Press to record from the radio or CD player. PLAY - Press to play cassettes. REWIND - From stop mode, press to rewind the tape toward the beginning. F.FWD - From stop mode, press to advance the tape toward the end. STOP/EJ. - Press to stop current tape activity or to open the cassette compartm ent door when no buttons are active. PAUSE - Press to interrupt tape play or record m ode. Press the second time to resume tape play or tape record mode. PLAYING A CASSETTE TAPE 1. Press the FUNCTION switch to select TAPE , the display will show TAPE . 2. Flip over the cassette cover and press STOP/EJ. key to open the cassette compartment door. 3. Insert cassette tape into the com partm ent with the open edge facing down and the full reel on the left. 4. Close the door securely. 5. Press REWIND or F.FWD to move tape to the desired starting point. 6. Press PLAY key to begin playing the tape. 7. Adjust the volume to your desired listening level. E-4 AUTOMATIC STOP FEATURE When the cassette deck is operating in play or record m ode and the end of the tape is reached, the unit automatically shuts itself off and returns all buttons to the off position. RECORDING FROM THE RADIO 1. Load a cassette tape into the tape deck and close the door. 2. Tune in to desired station by pressing the TUNING CONTROL/ CD SKIP UP/ DOWN CONTROL. 3. Depress RECORD key to begin recording. RECORD key and PLAY key are engaged simultaneously. 4. Press STOP/EJ. key to end recording. 5. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A CASSETTE TAPE. NOTE: PAUSE FOR A MOMENT - Using the PAUSE key on the cassette deck instead of the STOP/EJ. key to momentarily interrupt recording gives you a much clear recording. RADIO RECORDING TIPS To tem porarily pause the recording, press PAUSE key on the cassette deck. Press PAUSE key again to resume recording. RECORDING FROM CD/MP3 1. 2. 3. 4. Insert a blank cassette tape into the tape deck. Press the FUNCTION switch to select CD/MP3 playing mode. Open the disc compartment and load a disc and select the desired track you want to record. Press CD PLAY/ PAUSE button to start CD playback. Press RECORD key and the PLAY key will automatically engage to begin recording. 5. Press PAUSE key to interrupt or edit recording. Press it again to resume recording. 6. Press STOP/EJ. key to end recording. 7. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A CASSETTE TAPE. CARD-USB RECORDING 1. Install a blank tape into cassette compartment. 2. Press the FUNCTION button to CARD-USB m ode, connect the USB or CARD to the input port, start playback by pressing the CD PLAY/PAUSE button after the unit finished reading. 3. Depress the RECORD BUTTON and PLAY BUTTON simultaneously. Recording starts. Press the STOP/ EJ ECT BUTTON lightly to end recording, or the unit will stop recording automatically while the tape reaches its end. 4. To listen to the recording, press the FUNCTION button to select TAPE playing mode, then start tape playback. AUTOMATIC LEVEL CONTROL (ALC) This unit has the latest circuitry-Auto Level Control (ALC), While recording, adjusting the VOLUME control will not affect the recording volume, it keeps in a right and flat volume. E-5 U SING THE CD/MP3 LOADING A DISC 1. 2. 3. 4. Press the FUNCTION switch to select CD/MP3 playing mode. Open the CD door. Place an audio CD/MP3 into the tray with the label side facing up. Close the CD door. The display will show CD READ , then the total number of tracks and playing time will appear in the display after 5 seconds. Example : 11 47: 12 5. To rem ove the CD, press OPEN to open CD com partm ent lid, the display will show OPEN . Grasp the CD by its edges, and carefully take it out. Note: To ensure good system performance; wait until the disc tray completely reads the disc before proceeding. If no disc loaded into the com partm ent, or the disc is ...