MDV-3 Home Cinema Set -1- FORW AWRD WELCOME Thank you for purchasing this product. It is recommended that you read this instruction manual before use to ensure safe and enjoyable operation. PLEASE Please unpack carefully, and keep all the accessories in the same place. Do not place objects filled with liquids, such as vases, on this unit. Do not place naked flame sources, such as lighted candles on this unit. Do not interfere with the normal ventilation to this unit. If your unit is damaged or cannot be operated, please immediately notify your local dealers. We recommend that you keep the original cartons and packing materials intact for future shipping. -2- CONTENT FORWARD CONTENT ACCESSORIES WARNING PANEL REMOTE CONTROLLER CONNTECTION WITH TV CONNECTION WITH AMPLIFIER SYSTEM CONNECTION BASIC OPERATION MENU SETUP SPECIFICATION TROUBLESHOOTING .1 ..2 ... .2 ..3 4 5 ...6 .7 .8 ..9-14 15-20 . 21 ..22 ACCESSORIES -3- WARNING Please read and understand all warnings and instructions given in this user guide and those marked on the unit. Retain this guide for future reference. Power sources: this unit should Only be used with indicated on The marking label. Keep unit and power plug away from water. Avoid direct sunlight and hearting. Never open the cover. Avoid small .metals dropping into the unit like needle, hairpin, coins, etc. Protect power cable. Avoid high Pressure and do not step on it. Do not pull it or bend it excessively. Unplug the set from the wall outlet when you do not use it for a long time. An exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating instructions within the literature accompanying the appliance. A lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be sufficient magnitude to cause risk of an electric shock to persons. -4- PANEL 12 34 5 6 789 11 12 13 14 15 16 18 17 19 23 22 20 10 1. POWER 2. REMOTE CONTROLLER SENSOR 3. PREV(CH-) 4. NEXT(CH+) 5. DISC DOOR 6. VFD 7. PLAY/ENTER 8. AM/FM 9. EJECT 10.VOLUME 11. CENTRAL&SUBWOOFER OUTPUT 13.L/R FRONT AUDIO OUTPUT 14. S-VIDEO OUTPUT 15. VIDEO OUTPUT 16. Pb/Cb, Y, Pr/Cr CHROMATISM OUTPUT 17. OPTICAL OUTPUT 18. COAXIAL OUTPUT 19. SCART INTERFACE 20. SUBWOOFER OUTPUT 21. POWER SUPPLY INPUT 22. TAPE AUDIO INPUT 23. PC AUDIO INPUT 24. AM ANTENNA 25. FM ANTENNA 26. LEFT SPEAKER OUTPUT 27. RIGHT SPEAKER OUTPUT 12.L/R SURROUDING AUDIO OUTPUT -5- REMOTE CONTROLLER NOTE: 1. Turn on the player and have batteries installed in the remote controller, put the emitter against the sensor of player for remote control. 2. The distance of remote control should not exceed 7 meters, or else, it will be invalid. 3. If the sensor or remote controller emitter is stuck with foreign matters, it may result in the malfunction in signal reception or not at all. 4. The remote control function may be affected under the strong interference signals, such as power supply and other strong high-frequency signals. INT./P.SCAN MUTE FM/AM SEARCH FF/TUNEFR/TUNE+ NUMBER TITLE MENU OSD AUDIO PAUSE DIRECTION INPUT PAL/NTSC EJECT L/R(MO/ST) NEXT/CH+ PREV/CHTIME SEL T/F REPEAT REP.AB SUB. ANGLE STOP PLAY/ENTER INPUT TREBLE+ VOL+/TREBLE- SETTUP BASS+ SUBWOOFER ON/OFF DISPLAY BASS- BAS+ TRE+ DISPLAY BAS- TRE- -6- CONNECTION WITH TV 1. 2. 3. 4. If you TV has AV terminal, connect this unit to TV with A/V cables, and set TV to be AV status after confirming the connection is correct. (Figure 1) If your TV has S-Video terminal, please use the S-Video connection cable to connect the player and TV, to obtain a higher quality image. (Figure 2) If your TV has chromatism output terminal, please use three connection cables to connect the player and TV, to obtain a more vivid image. (Figure 3) This unit has an output interface for SCART output, which can directly be connected with computer or TV with such interface. Note: 1. 2. 3. 4. 5. It is a must to turn off the switch of both player and TV before they are connected and unplug the power line from the socket. You may adjust the corresponding system according to your TV system while watching various discs. If there are multiple connections between video player and TV, please select one and unplug others so as not to affect the quality of images and sound. Do not switch on and off or press power switch frequently, switching on and off each time must have an interval of 3 seconds. Do not connect the digital optical or coaxial output jack of this player with the analogue signal input terminal for reception. -7- CONNECTION WITH AMPLIFIER 1 2 Super bass Left channel Dolby amplifier Right channel Central TV Connect to video input Surround L Surround R Setup of Digital Audio Output Connect the optical and coaxial output jack to the amplifier. In the status of play or stop, press setup button on the remote controller to open the system setup page, switch to audio setup page by pressing the direction buttons, then move the cursor to Audio Out, select SPDIF/RAW or SPDIF/PCM, press Play/Enter button to finish. Press setup button again to exit this setup. Setup of 5.1 CH Analogue Audio Output Connect the FL, FR, SL, SR, CEN, SW jack to the amplifier. In the status of play or stop, press setup button on the remote controller to open the system setup page, switch to loudspeaker setup page, set the Downmix to be 5.1 CH, then set the subwoofer and Bass Mode to be ON, set the Center Delay and Rear Delay to be optimal status, Press setup button to exit. -8- SYSTEM CONNECTION Please refer to the following figure to connect your acoustic equipment! To keep all the connection correctly and firmly! Power supply will be connected finally. -9- BASIC OPERATION Preparative 1). Before turning on, check whether all the connection are correct and reliable. Plug the power plugs into the corresponding power socket. 2). Press Power button on the front panel to turn on. 3). Press Eject button on the remote controller or panel to carry the disc tray outside, put the disc into the tray, press Eject button again, this unit starts to read and play. Mute In play status, If Mute button is pressed, there will be no audio output, the sound is eliminated, however the image will still be played normally. Then press the button again or press Vol.+/- button to exit the mute status, the sound resumes to be its normal status. STATUS DISPLAY In play status, press Display button, the TV screen will display the following data: Disc Type, Mute ON/OFF, Menu ON/OFF, Soundtrack Repeat ON/OFF, Song Time SOUNDTRACK SWITCH In playing VCD, DVCD, press L/R(MO/ST) button to select the multiple output modes such as left soundtrack, right soundtrack, stereo, etc. Press the button once to switch one soundtrack. (Note: In playing DVD, SVCD, press this button and it will no action.) FAST FORWARD & FAST BACKWARD In play status, press Tunebutton or Tune+ , there will be quadplex speeds of fast forward and fast backword, shown as follows, FORWARD X 2, FORWARD X 4, FORWARDX 8, FORWARD X 20, PLAY BACKWARD X 2, BACKWARD X 4, BACKWARD X 8, BACKWARD X 20, PLAY PREVIOUS & NEXT In play status, press CHCH+ button, the song will skip to the previous one for play, press button, the song will skip to the next one. LANGUAGE SELECTION In play status, pressing Language button can select 8 languages for dialogue, they are: Chinese, English, Japanese, French, Spanish, Portuguese, Latin And German. (Only applied to the discs like DVD, SVCD, etc., recorded in multiple languages.) SUBTITLE SELECTION When the played DVD disc records multiple subtitles, you can make 8 selection of subtitle by pressing Subtitle button, they are: Chinese, English, Japanese, French, Spanish, Portuguese, Latin And German - 10 - BASIC OPERATION TIME SELECTION In play status, press T/F button on the remote controller, the TV screen displays, You can press direction button to move the cursor to the time position, then input the corresponding numbers by pressing number button, then press Play/Enter button to enter the desired part for playing. The optional time range depends on the volume of the played disc. For example: Select 55 minutes 20 seconds, enter 0,0,5,5,2,0, press Play/Enter. Select 90 minutes, enter0,1,3,0,0,0, press Play/Enter. REPEAT In play status, successively press Repeat button to separately select the different contents for repetition. 1). As for DVD, successively press Repeat button, the TV screen will separately display: Repeat OFF, Repeat chapter, Repeat Title. 2). As for CD, VCD, CD-R, etc., successively press this button, the screen will separately display: Repeat OFF, Repeat One, Repeat All. 3). As for Mp3, JPEG, etc., there are options: Rep. One, Rep. Menu, Rep. All. A-B REPEAT In play status, press Rep.A-B button to realize the specific section repeat, that is, press this button once at the beginning of the section (i.e A), and press it again at the end of the section (i.e B), this player will automatically return to A and starts to repeat playing the section from A to B. Press the button again to exit. SYSTEM SWITCH In any status, press the PAL/NTSC button on the remote controller, the TV screen will be switched among PAL,AUTO,NTSC,PAL60. TITLE If the played DVD disc contains a directory column, press the Title button to take out the items contained in this disc. Use the direction buttons to move the cursor to select the items you want to play, or directly use the number button to select. - 11 - BASIC OPERATION STOP In play status, press the Stop button, the TV screen will return to the turn-on picture, press Play/Enter button, the player will begin to play at the stopping time, here the TV screen will display Play Resume. In play status, successively press Stop button twice and then press Play/Enter button, the disc will be played from the start. PAUSE In play status, press Pause button, the player will pause, and press it again or press Play/Enter button once to go on playing. MENU Pressing Menu button on the remote controller can open or close PBC status. Note: 1). It will be no effect when play DVD discs. 2). The discs of 1.1 version or some fake have no this function. ANGLE SELECTION In play status, successively press Angle button, you can enjoy the same action shot in different angles. (The function depends on the discs.) VOLUME ADJUSTMENT You can press the VOL-/+ button to turn up or down the volume of this unit. DIRECTION BUTTONS Press the direction buttons to move the cursor to select pictures or menu. NUMBER BUTTONS 1). In playing songs, press number buttons to directly select the songs you need. 2). If the songs you want exceed 10 pieces, you may do it by pressing 10+ button once, and then press the number buttons (1--10). For example: If the 16th song is needed, you can press 10+ button first and then press 6 button. PROGRESSIVE SCAN / INTERLACE In the mode of YUV output, pressing INT./P.SCAN button can switch the two output modes: Progressive Scan and Interlace. Note: If the TV image is abnormal, please first confirm the correspondence between DVD setup and TV scanning mode. - 12 - BASIC OPERATION OUTER AUDIO INPUT Correctly connect the PC computer and Tape cassette with this unit, then press the Input button to enter PC status or TAPE status to enjoy the outer audio source. Mp3 DISC PLAYING FUNCTION 1). Press the Eject button on the panel or remote controller to open the deck, put in an Mp3 disc, then press Eject button to close the deck. This unit begins to read it, and the TV screen will display the following figure, 2). Press the directive keys to move the cursor to a certain directory, and press Play/Enter button to enter the directory. Press the direction buttons to enter the subdirectory or the file area, select a song with the cursor, press Play/Enter button to play the song. During playing, press directory. During playing, press the left direction button, the icon will skip to the directory symbol , press the up/down direction button to select other directories, press Play/Enter buttons for confirmation. Note: When play MP3 discs, this unit also has the functions such as mute, pause, previous and next selection. The operation are identical with CD playing. or button to select other songs under the current - 13 - BASIC OPERATION JPEG PICTURE DISC PLAYING FUNCTION 1). Place the JPEG disc into the deck, this unit will begin to read, the mail directory will be displayed on the TV screen. 2). Press the direction button found for play. During play, number buttons or to move the cursor to the corresponding directory, press Play/Enter button to enter the next layer, and so on, until the desired picture is button can be used to select pictures. JPEG pictures may distort at the edge to some TV sets, this is not the unit s fault. This unit can play the digital photo ...