MDV-6 Home Cinema Set FOREWORD THANKS Thank you for purchasing this product! Your choice of the product sufficiently displays your expertise in acoustic equipment. We are honored to provide you with more satisfactory products. To bring the functionality of your device into full play, it is suggested that you try to find some time To read this user manual before connecting and operating your system, so that you can Grasp system connections and requirements in use, and get enhanced enjoyment and Pleasure in using the product from the very beginning. IMPORTANT NOTICE Please unpack carefully, and keep all the accessories in the same place. Please check any possibilities in shipping damage. If your devices are damaged or cannot be operated, please notify your local dealers immediately. If the device is shipped to your place directly, please contact the carrier as soon as possible. Only the consignee(individual or company to receive the devices) is entitled to claim indemnity to the carrier in the light of shipping damages. We recommend that you keep the original cartons and packing materials soundly for future shipping. ACCESSORIES CONTENT -2- FOREWORD.................................................................................................2 CONTENT.....................................................................................................3 WARNING......................................................................................................3 FRONT PANEL...............................................................................................4 BACK PANEL................................................................................................5 REMOTE CONTROL.......................................................................................6 CONNTECTION WITH TV.................................................................................7 CONNECTION WITH AMPLIFIER......................................................................8 SYSTEM CONNECTION..................................................................................9 BASIC OPERATION...................................................................................10-16 DVD MENU SETUP....................................................................................17-21 SPECIFICATION............................................................................................22 TROUBLESHOOTING....................................................................................23 WARNING Please read and understand all the warnings given in the following and those marked on The unit. This unit has been designed and manufactured to assure personal safety. Only use the power by sign on user manual or system! Keep unit and power plug away from water! Avoid direct sunshine and close heat source. Never open the cover, avoid metals dropping in, like needle, hairpin, coin, etc. Protect power cable: avoid high pressure and stamp on; do not pull and bend excessively. Unplug the set from the outlet when you do not use it for a long time FRONT PANEL -3- 1. REMOTE CONTROL SENSOR 2. POWER ON/OFF BUTTON 3. STOP BUTTON 4. DISC DOOR 5. EJECT BUTTON 6. AUDIO BUTTONMONO/STEREO BUTTON 7. PLAY/ENTER BUTTON 8.. DISPLAY SCREEN 9. FAST REWIND/FAST FORWARD (TUNE-/+) BUTTON 10. VOLUME+/11. PREVIOUS/NEXT(CH-/+) BUTTON 12. FM BUTTONSEARCH BUTTON 13. DVD BUTTONSAVE BUTTON -4- BACK PANEL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. FM ANTENNA INTERFACE COAXIAL OUTPUT SCART OUTPUT POWER SUPPLY INPUT S-VIDEO OUTPUT OPTICAL FIBER OUTPUT L/R AUDIO INPUT L/R SPEAKER OUTPUT SUBWOOFER OUTPUT VIDEO OUTPUT Pb/Cb, Y, Pr/Cr COMPONENT OUTPUT L/R AUDIO OUTPUT -5- REMOTE CONTROL NOTE: 1. Place the batteries in the remote control and turn on the player, put the emitter against the sensor of player for remote control. 2. The distance of remote control should not exceed 7 meters, or else, it will be invalid. 3. If the sensor or remote control emitter is stuck with foreign matters, it may result in the malfunction in signal reception or not at all. 4. The remote control function may be affected under the strong interference signals, such as power supply and other strong high-frequency signals. REMARK: Remote Control Battery Type: Size: AAA Standard Voltage: 1.5V -6- CONNECTION WITH TV 1. 2. 3. 4. If you TV has AV terminal, connect this unit to TV with A/V cables, and set TV to be AV status after confirming the connection is correct. (Figure 1) If your TV has S-Video terminal, please use the S-Video connection cable to connect the player and TV, to obtain a higher quality image. (Figure 2) If your TV has chromatics output terminal, please use three connection cables to connect the player and TV, to obtain a more vivid image. (Figure 3) This unit has an output interface for SCART output, which can directly be connected with TV. (Figure 4) Note: 1. 2. 3. 4. It is a must to turn off the switch of both player and TV before they are connected and unplug the power line from the socket. You may adjust the corresponding system according to your TV system while watching various discs. If there are multiple connections between video player and TV, please select one and unplug others so as not to affect the quality of images and sound. Do not switch on and off or press power switch frequently, switching on and off each time must have an interval of 3 seconds. 5. Do not connect the digital optical or coaxial output jack of this player with the analogue signal input terminal for reception. -7- CONNECTION WITH AMPLIFIER Setup of Digital Audio Output Connect the optical or coaxial output jack to the amplifier. While in of play or stop mode, press the setup button on the remote control to open the system setup page, switch to audio setup page by pressing the directional buttons, then move the cursor to Audio Out, select SPDIF/RAW or SPDIF/PCM, press Play/Enter button to finish. Press setup button again to exit the setup. -8- SYSTEM CONNECTION Please refer to the following figure to connect your acoustic equipment! To keep all the connection correctly and firmly! Power supply can be connected finally. -9- BASIC OPERATION PREPARATIVE 1). Before turning on, check whether all the connection are correct and reliable. Plug the power plug into the corresponding power socket. 2). Press Power button on the front panel to turn on. 3). Press Eject button on the remote control or panel to carry the disc tray outside, put the disc into the tray, press Eject button again, this unit starts to read and play. MUTE In play status, If the Mute button is pressed, there will be no audio output, the sound is eliminated, however the image will still be played normally. Then press the button again or press Vol.+/- button to exit the mute status, the sound resumes to be its normal status. STATUS DISPLAY In play status, press Display button, the TV screen will display the following data: VCD display: Disc Type, Soundtrack and Gross Track, Mute ON/OFF, Menu ON/OFF, Repeat ON/OFF, Song Time. DVD display: Disc Type, Chapter and Gross Chapter for play, Song Time, Language Channel Mode, Screen Picture Proportion, Angle Status. SOUNDTRACK SWITCH In playing VCD, DVCD, press L/R/LANG button to select the multiple output modes such as Mono L, Mono R, Stereo, etc. Press the button once to switch one soundtrack. In playing DVD, press L/R/LANG button can select multiple languages for playback. (Only applies to the discs like DVD recorded in multiple languages.) FAST FORWARD & FAST BACKWARD In play status, press Tunebutton or Tune+ , there will be various speeds of fast forward and fast backward, shown as follows, FORWARD X 2, FORWARD X 4, FORWARDX 8, FORWARD X 20, PLAY BACKWARD X 2, BACKWARD X 4, BACKWARD X 8, BACKWARD X 20, PLAY PREVIOUS & NEXT In play status, press CHCH+ button, the device will skip to the previous one for play, press button, the device will skip to the next one. SUBTITLE SELECTION When the played DVD disc records multiple subtitles, you can make 7 selection of subtitle by pressing Subtitle button, they are: English, German, French, Spanish, Italian, Dutch and Danish. -10- BASIC OPERATION TIME SELECTION In play mode, press T/F button on the remote control, the TV screen displays, VCD Display: VCD TRK 01/XX VCD Display: DVD TT 01/XX PBC CH 007/XXX 00:00:00 00:00:00 You can press directional buttons to move the cursor to the time position, then input the corresponding numbers by pressing the numeric buttons, then press Play/Enter button to enter the desired part for playing. The optional time range depends on the volume of the played disc. For example: Select 55 minutes 20 seconds, enter 0,0,5,5,2,0, press Play/Enter. Select 90 minutes, enter 0,1,3,0,0,0, press Play/Enter. REPEAT In play status, repeatedly press Repeat button to separately select the different contents for repetition. 1). As for DVD, repeatedly press Repeat button, the TV screen will separately display: OFF, CHAPTER, ALL. 2). As for CD, VCD, CD-R, etc., Successively press this button, the screen will separately display: OFF, REP 1, REP ALL. 3). As for MP3, JPEG, etc., there are options: OFF, REP 1, REP DIR, REP ALL. A-B REPEAT In play status, press Rep.A-B button to realize the specific section repeat, that is, press this button once at the beginning of the section (i.e A), and press it again at the end of the section (i.e B), this player will automatically return to A and starts to repeat playing the section from A to B. Press the button again to exit. SYSTEM SWITCH In any status, press the PAL/NTSC button on the remote control, the TV screen will be switched among PAL, PAL 60, AUTO, NTSC. TITLE If the played DVD disc contains a directory column, press the Title button to take out the items contained in this disc. Use the direction buttons to move the cursor to select the items you want to play, or directly use the number button to select. -11- BASIC OPERATION SHORTCUT When play DVD discs, press the Shortcut button to jump over the initial title, menu or warnings. (Only for some discs, subject to the quality or recorded status of the played discs) SOUND FIELD In play status, press S.Field button, you can select different sound field effect. Note: While in DVD playing, this function is invalid. RESET In any status, press Reset button can return the original setup or default value. STOP In play mode, press the Stop button, the TV screen will return to the startup screen, press Play/Enter button, the player will begin to play where it left off, here the TV screen will display "RESUME". In play status, successively press Stop button twice and then press Play/Enter button, the disc will be played from the beginning. PAUSE In play status, press Pause button, the player will pause, and press it again or press Play/Enter button once to continue playing. MENU Pressing Menu button on the remote control opens or closes the PBC menu. Note: 1). It will go into the Root menu when playing DVD discs. 2). Older discs or some copies don't support this function. ANGLE SELECTION In play status, repeatedly press Angle button, you can enjoy the same action shot in different angles. (The function depends on the discs.) VOLUME ADJUSTMENT You can press the VOL-/+ button to turn up or down the volume of this unit. DIRECTION BUTTONS Press the direction buttons to move the cursor to select pictures or menu. -12- BASIC OPERATION NUMBER BUTTONS 1). While playing songs, press the numeric buttons to directly select the songs you need. 2). If the desired track number is # 10 or above, you can select it by pressing the 10+ button once, and then pressing a numeric button (1--10). For example: If the 16th song is needed, you can press the 10+ button followed by the 6. PROGRESSIVE SCAN/INTERLACE Press the INT./P.SCAN button to switch four video output modes: INTERLACE-YUV, TV-RGB, P-SCAN YPBPR, S-VIDEO. Note: If the TV image is abnormal, please first confirm the correspondence between DVD setup and TV scanning mode. STANDBY Press the Power button on the remote control can open or close the unit. Before you perform the operation, make sure the main power is on. Note: This standby function is one kind of saving electricity modes. When the device does not be used for a long time, please close the main power. INPUT SELECTION Correctly connect the outer equipment (e.g. PC computer) with this unit, then press the Audio button on the front panel or remote control to enter Audio status to enjoy the outer audio source. Press the FM button on the remote control or front panel to select tuner. Press the Play/Enter button or DVD button on the front panel to select DVD mode. The unit will start playing if there is a disc inserted. FUNCTION If you want to adjust the volume of Treble, Bass or Subwoofer. First to press the Function button, select to the corresponding item and press Vol+/- button on the remote control can increase or reduce the volume of Treb ...