Instruction Manual Xemio-119/129/139 Notice: Thank you for choosing our product! Please read the user's manual carefully to ensure proper operation. Content Precautions System requirement 1. Installation instruction 1.1 Installing the driver 1.2 Installing the battery 2. Connecting/ downloading 2.1 Connecting to PC 2.2 Removing USB device 3. Basic operation 3.1 Buttons and functions 3.2 Power on/off 3.3 Main menu setup 4. MP3 Player Operation 4.1 Playing music 4.2 Playing voice files 4.3 Function Setting 1 4.3.1 Setting EQ mode 4.3.2 Setting Play mode 4.3.3 Setting Contrast 4.3.4 Setting Backlight 4.3.5 Setting Power set 4.3.6 Setting Recording 4.3.7 Setting Language 4.3.8 Exit 4.4 Preview function 4.5 About 4.6 Folder function 4.7 Exit 5. Recording function 6. A-B loop playing 7.Lock function Lyric sync USB mode FAQ Technical specifications 2 Precautions 1) Never use the player during driving or operating other vehicles to avoid traffic accident, which is also restricted by the law in some districts. Even on foot, it is still dangerous to listen to extremely high volume levels, especially when crossing the street. Whenever your surroundings require alertness, please stop using the player for safety purposes. 2) Please connect the earphones before you switch on the player. This not only avoids damaging the earphones, but also helps to keep the player in good condition. 3) Keep the player clean and away from heat sources or direct sunlight, dirt, high humidity and rain. 4) If the surface is dirty, please clean it carefully with a damp soft cloth or soft abluent. Never clean the case with alcohol or diluents. 5) Never use the player in rather dry environment to avoid static. 6) Never disconnect the player from PC abruptly during downloading, uploading and formatting to avoid application failure. 7) When the player is used as removable disk, please follow the proper file download and upload procedures. Our company resumes no responsibility for any file lost due to improper operation. 8)You can reset by removing the AAA batteries. 3 System requirement System requirement of MP3 player: Microsoft Windows 98se/2000/Me/XP Pentium 200MHZ or above. USB port 120MB hard disk space Mouse installed CD-ROM drive 4 1. Installation instruction 1.1Installing driver for Windows 98se (not required for Windows ME or above) a. Connect the MP3 Player to the USB port of a PC, "Find new hardware" appears on the screen, then click "Search latest driver for this device" and insert the driver CD into CD-ROM, and then click "Next". b. Select "Look in" to direct the installation directory to the "Drivers" files in the driver CD, then click Yes. c. PC will install the driver for Windows 98se automatically. 1.2 Installing battery Install one AAA alkaline battery properly upon indicator on the play. Press button to power the player on and enter the MP3 standby mode. 2. Connecting and downloading 2.1 Connecting a PC as USB Before operation, please verify the player is powered on with one end of the USB cable came with the system inserted into PC and another end into the MP3 player. Data transferring Reminder:Due to computer capability issue, please turn on your MP3 Player before connecting to the USB port ! 5 2.2Removing the USB device a.Double click the Safely Remove Hardware icon in taskbar: b.From Safely Remove Hardware screen, highlight "USB Mass Storage Device" item, and then click "Stop" button. "Stop to Hardware Device" window appears on the screen as shown in the picture below. player can be disconnected from PC safely. Notice: Never unplug the USB cable when transmitting data with PC to avoid damaging the Player; after data transmitting, please do not disconnect the player from PC until "Device now be safely removed" appears; while using USB function, all other buttons will be nonfunctional. Any application lost or I/O error and power on issues caused by improper operations, please refer to FAQ. 6 7 8 3. Basic operation 3.1 Buttons and functions 1) Earphone jack 5) VOL+ 8) A-B/REC 2) Next 6) 9) Last 3) VOL10) Menu 4) Microphone 7) LCD display 11) Hold Play/Pause/Stop 9 3.2 Power on/off From power off mode, press the button to power the player on and button 3 seconds under any enter the MP3 standby mode; press the mode, the player will save the data and enter power off mode. MP3 standby mode * Importance If the power is directly cut off in standby mode or play back process, all the data set cannot be saved!* 3.3 Main menu setup From standby or playing mode, you can keep pressing the MENU button to enter the main menu function-setting mode. Push the setting. or button to select: Play music, Play voice, Setting, Preview, About, Folder and Exit; you can press the MENU button to enter the desired 4. How to use the MP3 player 4.1Playing music a) From MP3 standby mode, you can press the button to play MP3 10 music and press the press the button again to pause. To resume playing, please Pause button the third time. Play b) From play or pause mode, press and hold the button again, it will repeat step "a)". button 2 seconds, the player will return to the MP3 standby mode, press and hold the c) d) e) f) g) From MP3 standby or play mode, you can push the From STOP status, you can push and hold the From play mode, you can press the or or or button to select last or next music. button to find your desired music quickly. button to fast backward or forward in this music. From play mode, press the V + or V-button to adjust volume. From MP3 standby, play and pause mode, press and hold the button 3 seconds, the player will save the data and enter the power off mode. 4.2 Playing voice a) From MP3 mode or voice standby mode, keep pressing the MENU button 11 to enter the main menu. To enter the playing voice mode, push the or button to select Voice and press the MENU button. You can press the button to play, and press this button again to pause. To resume playing, please press this button a third time. Play pause b) From voice standby or play mode, you can press the select last or next voice file. c) From STOP status, you can push and hold the your desired music quickly. d) From Play mode, you can push and hold backward or forward in this music. e) From voice standby mode, press the will enter the MP3 power off mode. or or or button to button to find button to fast button 3 seconds, the player Note: The EQ selection will be unavailable when playing the voice files. 4.3 Function Setting From MP3 mode or voice standby mode, keep pressing the MENU button to enter the main menu, and push the or button to select setting and press the MENU button to enter. The function setting includes: EQ mode,play mode, 12 contrast,backlight, power set, recording set, language and exit. press the MENU button to save the selected setting mode. 4.3.1 Setting EQ mode Push the or button to select the EQ mode: Normal, pop,rock, classical, jazz and bass. Press MENU button to save the selected EQ set. 4.3.2 Setting Play mode Push the or button to select the playing mode, including: Normal, repeat one, repeat all and shuffle. You can press the MENU button to save the selected play mode. Normal repeat one repeat all shuffle 13 4.3.3 Setting Contrast Push the or button to adjust the contrast of LCD. Press MENU button to save the selected setting. 4.3.4 Adjusting Backlight Push the or button to select the backlight setting, including: Off, 5s, 10s, on. Press MENU button to save the selected setting. 4.3.5 Setting Power set Push or button to select the Power set, including: 2m, 10m, 30m, off. Press the MENU button to save the selected shutdown time. 4.3.6 Setting Recording Push or button to select the recording setting, including: 8000Hz, 11000Hz, 16000Hz, 22000Hz. Press the MENU button to save the select 14 the recording setting. 4.3.7 Setting language Push the or button to select language: German, English, French, Spanish, Italian,Dutch,Portuguese or Hungarian. Press the MENU button to save the selected language. 4.3.8 Exit Return to previous mode. 4.4 Preview function From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the or button to select the preview function setting, and then press the MENU button to begin previewing. During preview, it will play the initial 10 seconds of each music file and then skip to next. You can press the button to exit. 15 4.5 About From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the memory. or button to select About function, and then press the MENU button to view the total memory and available 4.6 Folder function From MP3 mode or voice standby mode, you can press the MENU button to enter the main menu, and push the button to browse the file, and push the or or button to select folder function, to select the desired one. and then press the MENU button to enter. You can push and hold the MENU In folder mode, press MENU to enter PLAY OR DELETE mode,press the or button to select.press MENU to confirm .if you select the play,it will or button to select YES OR NO. Press MENU to confirm and play the current song.if you select the delete,it will go to the delete menu. Press the press to exit. 16 Note: You can not view the record folder and file under play music mode, which will only be available in play voice mode. ) 4.7 Exit Return to MP3 mode. Note: From setting mode, you can press the to exit the setting mode quickly. 5.Recording function From MP3 mode or voice standby mode, keep pressing the A-B /REC button, the player begin recording, and press the A-B/REC button again to stop. You can press the button to play voice, and press this button again to pause. recording Stop recording To resume playing, please press this button a third time. button 6. A-B Play Mode From MP3 or voice mode: 1) Press the A-B /REC button to select starting point A. 2) Press the A-B /REC button to select end point B, it will repeat between A-B. 3) Press the A-B /REC button again to cancel setting and resume playing MP3 or voice. 17 7. Lock function From MP3 and voice standby/ play/ pause/ record mode, you can push the HOLD switch opposite the arrow to lock all the other buttons with a Lock icon on the LCD accordingly. If you want to use other buttons, please push the HOLD switch to the opposite direction of arrow. Lyric sync This player supports lyric sync function. Notice: The lyric name shall be the same as music with suffix of *. LRC and saved in the same directory, and only the lyrics with time indication can be displayed properly. USB mode Plug the Player into the USB port of a PC, relative icons appears on the LCD screen. LCD screen may display relative icon when transmitting files between the Player and PC. On how to update the software or format the removable disk, please refer to the website. 18 FAQ Problem No display after pressing the power button. Without sound when playing music. Causes Without installing battery or battery low. 1. Volume is too low or without music in your player. 2. Battery low. 3. MP3 or WMA file is corrupt. 1. HOLD is on, the disk is write protected. 2. The USB is not connected to PC properly. 3. Storage directory is wrong. Solution Verify the battery is installed, change battery. 1. Adjust volume or download file. 2. Change battery. 3. Download the documents again. 1. Push the HOLD switch to the opposite direction. 2. Connect to the USB interface again and verify PC identified the removable disk. 3. Maximum 256 folders or files can be saved under root directory (if the file name is over 8 characters, the number of folder or file will decrease accordingly); if exceeded, please create another subdirectory under root directory before copy. Can not download music file after connection. 19 Can not play the private compressed MP3 files. PC can not identify the mp3 player. No response after pressing button. Can not open the disk or prompt I/O error after connecting PC. The MP3 files currently are compressed with different compress rate and format, while this Player supports standard compressed MP3 only, please do not adopts layer one or two compression. Improper operation. Download the standard MP3 files again. Format the removable disk. HOLD switch is on, buttons are locked. Caused by some improper operation. Push the HOLD switch to the opposite direction. Press and hold the V+button, and then connect USB cable, when there is a circle appears in the first box,then press firmware feature to format ,the upgrade will be ok until the circle change to a tick. 20 Technical specifications Bit rate: 8~320Kbps Adjustable LCD contrast: 0-5 SNR: >85db Adjustable backlight time: 5s, 10s, on, off Dynamic range: >80(1KHZ) Condition of storage: Humidity<90%, normal temperature Distortion: <0.05% (REFERENCE LEVEL:0dB MP3 1 mW 4mW -52dB/-62dB VOICE, REFERENCE FREQUENCY:1KHZ ID3 information display, blue backlight USB port: USB2.0 high ...