DUAL ALARM DIGITAL CLOCK RADIO MODEL CDR-1902 OPERATING INSTRUCTIONS CD PLAYER DUAL ALARMS - PERFECT FOR WEEKDAYS & WEEKENDS PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT RECEIVES AM/FM BROADCASTS WAKE UP TO CD, RADIO OR BUZZER EASY TO SET CLOCK BATTERY BACK-UP (9V BATTERY NOT INCLUDED) PLEASE READ CAREFULLY BEFORE USE IB-CDR1902(TA)-WM-E-090902 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 10. 11. 12. 13. Unplug this apparatus during lightening storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus. 1 IB-CDR1902(TA)-WM-E-090902 ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 5. Do not connect FM antenna wire to any outdoor antenna. Do not apply oil or petroleum products or solvents to any part of this set. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on the bottom of the set. 2 IB-CDR1902(TA)-WM-E-090902 1. Setting the Clock TIME BUTTON CLOCK/CD DISPLAY 1 MINUTE BUTTON HOUR BUTTON Connect the AC power cord into a live wall outlet. Clock display will show 12:00 . If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. This plug is polarized and only fits one way into the wall outlet. 2 Hold the TIME button down, button down, 3 Hold the TIMEthe MINUTE and press and press the HOUR button, until the right hour time shows PM indication lights up in the display. for PM time. button until the right minute time shows in the display. Example: 10:26 p.m. Refer to Page 10 Part 8. Setting the Alarm Times for setting alarm time. 3 IB-CDR1902(TA)-WM-E-090902 2. Playing a CD POWER button CD DOOR OPEN button CD DISPLAY button CLOCK/CD DISPLAY FUNCTION switch (on the left side) CD PLAY button Connect the AC power cord (see Setting the Clock). 1 Press the POWER button to turn on the power, make sure the POWER lamp is on. Slide the FUNCTION switch to CD position. Press the CD D OOR OPEN button to open the CD Door and place the CD in the CD compartment. The label side of the CD should face upward. Close the CD D OOR by pushing it down at the right corner. The display will show the total track number of the disc for 5 seconds, then go back to clock time display. Press the CD PLAY button. The player plays all the tracks once. Press the CD DISPLAY button, the display will show the track number of current play. 2 3 4 POWER lamp total track number of the disc CD Track number During CD play, the display still shows CLOCK time, press CD DISPLAY button if you want CD display. 4 IB-CDR1902(TA)-WM-E-090902 3. More about CD operation Use these buttons for additional operations POWER button POWER lamp CD DOOR OPEN button CD Track VOLUME CONTROL Tip When CD play is paused, the CD track number will flash and no music will play. To resume play, press the PAUSE button again, CD track number will stop flashing and music will play. To Adjust the volume Stop playback Pause playback Press or Adjust Volume Control STOP PLAY/PAUSE CD track number will flash during pause. Press again to resume play after pause. SKIP/SEARCH FORWARD SKIP/SEARCH BACKWARD or while playing, press and hold down until you find the point. CD DOOR OPEN button (press first). Press the POWER button to turn off the power, the POWER lamp will be off. Go to the next track Go back to the previous track Locate a point in a song Remove the CD Turn off the CD player 5 IB-CDR1902(TA)-WM-E-090902 4. Playing CD tracks repeatedly (Repeat Play) POWER button REPEAT lamp FUNCTION switch (on the left side) REPEAT button 1. Press the POWER button to turn on the power and slide the FUNCTION switch to CD position. 2. Press (PLAY button). 3. Press the CD REPEAT button. To repeat a single track (song) all the tracks (all songs) Press (during play) Press the REPEAT button once Press the REPEAT button twice or Repeat Lamp Flashing Steady on . 4. You may select the individual track to repeat by pressing To cancel Repeat Play Press the REPEAT button until the REPEAT lamp is off. 6 IB-CDR1902(TA)-WM-E-090902 5. Playing CD in programmed order You can make a program of up to 20 tracks in the order you want them to be played. PROGRAM lamp PROGRAM button 1. Press the POWER button to turn on the power and slide the FUNCTION switch to CD position. Make sure the CD is stopped. 2. Press the PROGRAM button. The letters P01 will show and the PROGRAM lamp will flash. 3. Press or to select the tracks you want to program in the order you want. 4. Press the PROGRAM button to confirm. The letters P02 will show. 5. Repeat steps 3 and 4. You can program up to 20 tracks. 6. Press to start programmed play. The PROGRAM lamp will show steadily on the display. To change the current program To cancel Programmed Play Just create a new program following the programming procedure. Press the STOP button to stop programmed play. Press the STOP button again after pressing the PROGRAM button or press the CD DOOR OPEN button to open the CD door, and the PROGRAM lamp goes off. 7 IB-CDR1902(TA)-WM-E-090902 6. Listening to the radio LEFT SIDE VIEW RIGHT SIDE VIEW FUNCTION SWITCH VOLUME CONTROL TUNING CONTROL BAND SWITCH Connect the supplied AC power cord (see Setting the Clock). 1 2 3 4 5 Press the POWER button to ON and slide the FUNCTION switch to RADIO position. Slide the BAND switch to the proper band position that you want. Tune into the station you prefer using the TUNING CONTROL. Adjust for the clearest sound. Adjust the VOLUME CONTROL for desired loudness. Press the POWER button to turn off the power and the Radio, the POWER lamp will go off. 8 IB-CDR1902(TA)-WM-E-090902 7. More about radio operation PHONES jack FM ANTENNA BATTERY COMPARTMENT (at the bottom of the set) To improve broadcast reception Fully stretch out the FM ANTENNA for better FM reception. Reorient the player itself for better AM reception. Or locate the set near a window. To listen without disturbing others Connect your headphones (optional - not included) into the PHONES jack at the back of the set. The speaker will automatically be silenced. Remember to unplug the headphones if you want the set to wake you up in the morning. To use battery backup Install a 9V battery for Clock backup, so that if your home power is momentarily off, you will not have to set up the time & alarm settings. Note: The display will not show the time but the time will be kept in memory and will reappear when power is restored. 9 IB-CDR1902(TA)-WM-E-090902 8. Setting the Alarm Time This set has dual alarms. You may set ALARM 1 to wake you at a certain time, or ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will sound at the times you set. This feature is useful for a husband & wife waking up at different times or a single person who likes to wake up at different times during weekdays or holidays. To set ALARM 1, slide the ALARM SET switch to position 1, the ALARM 1 lamp will turn on. To set ALARM 2, slide the ALARM SET switch to position 2, the ALARM 2 lamp will turn on. FRONT SIDE VIEW ALARM ALARM 1 lamp ALARM 2 lamp MINUTE HOUR ALARM SET switch RIGHT SIDE VIEW 1 Hold the ALARM button. the HOUR 2 PressRelease the button to select correct hour time. HOUR button but continue to press the ALARM button. 3 Press the MINUTE button for correct minute. button, the 4 Release the ALARM time of day. clock display will show the normal NOTE 1: The alarm times can not be set when the ALARM SET button is switched to OFF or ALARM 1+2 position. NOTE 2: If you want to be waked up in the morning, the PM lamp should be off on alarm time (when pressing ALARM button). To change PM to AM time, advance time 12 hours. NOTE 3: To wake to ALARM 1 time, slide ALARM SET switch to position 1. To wake to ALARM 2 time, slide ALARM SET switch to position 2. To wake to both times, slide ALARM SET switch to position 1+2. 10 IB-CDR1902(TA)-WM-E-090902 9. Waking up to alarm or music 1. Waking up to alarm 1.Set the alarm time as previously instructed and slide the ALARM SET switch to ALARM 1, ALARM 2 or ALARM 1+2, the proper ALARM lamp will be on. 2.Set the FUNCTION switch to BUZZER position. Alarm buzzer will sound at the set alarm time. 2. Waking up to CD 1. Set the alarm time as previously instructed and slide the ALARM SET switch to ALARM 1, ALARM 2 or ALARM 1+2, the proper ALARM lamp will be on. 2. Set the FUNCTION switch to CD position. 3. Make sure there is a CD disc loaded in the compartment and POWER lamp is off. The CD Disc will start playing from the first track at the set alarm time. 3. Waking up to radio 1. Refer to Listen to the radio for radio operation instructions. Select the desired AM or FM band using the BAND switch and TUNING knob. 2. Set the alarm time as previously instructed and slide the ALARM SET button to ALARM 1, ALARM 2 or ALARM 1+2, the proper ALARM lamp will be on. 3. Set the FUNCTION switch to RADIO position. 4. Press the POWER button to turn off the power, make sure the POWER lamp is off. The radio will start playing at the set alarm time. 11 IB-CDR1902(TA)-WM-E-090902 10. Snooze and Sleep functions When alarm or music comes on 1. To sleep extra 6 minutes Just press the SNOOZE button, the alarm or music will stop and come on after 6 minutes. 2. To stop the alarm or music Just press the ALARM OFF (POWER) button, the alarm or music will stop and come on next day. Going to Sleep with CD music 1. Follow steps 1-4 of Playing a CD on Page 4 to start the CD play. 2. Press the SLEEP button,the display will show two dashes --, and the SLEEP lamp flashes in the display. Press the SLEEP Button to select the ...