® DUAL ALARM DIGITAL CLOCK RADIO MODEL CDR-1902 OPERATING INSTRUCTIONS CD PLAYER DUAL ALARMS - PERFECT FOR WEEKDAYS & WEEKENDS DUAL DISPLAYS FOR CLOCK & CD PLAY PLAYS MUSIC COMPACT DISCS FULLY PROGRAMMABLE CD PLAYER WITH REPEAT RECEIVES AM/FM BROADCASTS WAKE UP TO CD, RADIO OR BUZZER EASY TO SET CLOCK BATTERY BACK-UP (9V BATTERY NOT INCLUDED) PLEASE READ CAREFULLY BEFORE USE IB-CDR1902(AD)-WM-E-062802 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightening storms or when unused for long periods of time. 10. 11. 12. 13. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus. 1 IB-CDR1902(AD)-WM-E-062802 ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 5. Do not connect FM antenna wire to any outdoor antenna. Do not apply oil or petroleum products or solvents to any part of this set. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on the bottom of the set. 2 IB-CDR1902(AD)-WM-E-062802 1. Setting the Clock TIME BUTTON CLOCK DISPLAY FORWARD BUTTON REVERSE BUTTON CD DISPLAY 1 Connect the AC power cord into a live wall outlet. Clock display will show 12:00 flashing. If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. This plug is polarized and only fits one way into the wall outlet. 2 TIME FORWARD Hold the TIME button and the FORWARD button simultaneously to set the PM indication lights up approximate time quickly. for PM time. 3 TIME REVERSE Hold the TIME button down, and press the REVERSE button to set the desired correct minutes. Example: 10:26 p.m. Refer to Page 10 Part 8. Setting the Alarm Time for setting alarm time. 3 IB-CDR1902(AD)-WM-E-062802 2. Playing a CD CD DOOR OPEN button CD DISPLAY MODE switch (on the left side) CLOCK DISPLAY CD PLAY button Connect the AC power cord (see Setting the Clock). FUNCTION switch (on the right side) 1 OFF BUZZ Slide the FUNCTION switch to CD position and the MODE switch to ON position. The CD display will show two zeros, , then . Press the CD D OOR OPEN button to open the CD Door and place the CD in the CD compartment. The label side of the CD should face upward. Close the CD DOOR by pushing it down at the right corner. The CD display will show the total track number of the disc. Press the CD PLAY button. The player plays all the tracks once. And the CD display will show the track number of current play. PLAY/ PROGRAM REPEAT 2 3 4 total track number of the disc PLAY/ PROGRAM REPEAT CD Track number Remember to slide the MODE switch to BUZZ or AUTO position after listening, so that the buzzer alarm, CD music or radio will wake you up at your preset time. Make sure the volume control is adjusted loud enough to wake you up. 4 IB-CDR1902(AD)-WM-E-062802 3. More about CD operation Use these buttons for additional operations CD DOOR OPEN button CD Track VOLUME CONTROL FUNCTION SWITCH Tip When CD play is paused, the CD track number will flash and no music will play. To resume play, press the PAUSE button again, CD track number will stop flashing and music will play. To Adjust the volume Stop playback Pause playback Press or Adjust Volume Control STOP PLAY/PAUSE CD track number will flash during pause. Press again to resume play after pause. SKIP/SEARCH FORWARD SKIP/SEARCH BACKWARD or while playing, press and hold down until you find the point. CD DOOR OPEN button (press first). Slide the FUNCTION switch to OFF position. Go to the next track Go back to the previous track Locate a point in a song Remove the CD Turn off the CD player 5 IB-CDR1902(AD)-WM-E-062802 4. Playing CD tracks repeatedly (Repeat Play) REPEAT lamp PROGRAM/REPEAT button FUNCTION switch (on the right side) 1. Slide the FUNCTION switch to CD position and the MODE switch to ON position. 2. Select the track by pressing or , and the press (PLAY button). 3. Press the CD PROGRAM/REPEAT button. To repeat a single track (song) Press (during play) Press the PROGRAM/REPEAT button once, both the PLAY/ PROGRAM and REPEAT lamps will be steady on. Press the PROGRAM/REPEAT button twice, the PLAY/ PROGRAM lamp will be steady on and the REPEAT lamp will flash. During the programmed play, press the PROGRAM/REPEAT button twice, both the REPEAT and the PLAY/PROGRAM lamps will flash. Display shows PLAY/ PROGRAM REPEAT all the tracks (all songs) PLAY/ PROGRAM REPEAT all the tracks programmed PLAY/ PROGRAM REPEAT To cancel Repeat Play Press the REPEAT button until the REPEAT lamp goes off. 6 IB-CDR1902(AD)-WM-E-062802 5. Playing CD in programmed or random order 1. Programmed Play You can make a program of up to 16 tracks in the order you want them to be played. PLAY/PROGRAM lamp To change the current program To cancel Programmed Play RANDOM BUTTON PROGRAM/REPEAT button 1. Slide the FUNCTION switch to CD position and the MODE switch to ON position. Make sure the CD is stopped. 2. Press the PROGRAM button. The letters will show and the PLAY/PROGRAM lamp will flash. 3. Press or to select the tracks you want to program in the order you want. 4. Press the PROGRAM button to confirm. The letters will show. 5. Repeat steps 3 and 4. You can program up to 16 tracks. (the display will show , ... for program #1116). to start programmed play. The PROGRAM lamp 6. Press will remain flashing in the display. PLAY/ PROGRAM REPEAT PLAY/ PROGRAM REPEAT Just create a new program following the programming procedure. Press the STOP button to stop the programmed play. The programmed memory will be lost only when the FUNCTION switch is slided to OFF or the CD door is opened. 2. Random Play Press the CD RANDOM button , the CD display will show some flashing symbols like ... ... ... ... ... ... ... ... (currently played track number) continuously during the random play. Press to skip to the next random song. To play the songs in random order To resume normal play Press the CD RANDOM button again. 7 IB-CDR1902(AD)-WM-E-062802 6. Listening to the radio LEFT SIDE VIEW RIGHT SIDE VIEW 1 2 1+2 AUTO BUZZ ON MIN VOLUME MAX TUNING AM FM CD OFF RADIO ALARM VOLUME CONTROL TUNING BAND FUNCTION CONTROL SWITCH SWITCH Connect the supplied AC power cord (see Setting the Clock). 1 2 3 4 5 CD OFF RADIO Slide the FUNCTION switch to RADIO position and the MODE switch to ON. AUTO BUZZ ON AM FM Slide the BAND switch to the proper band position that you want. Tune into the station you prefer using the TUNING CONTROL. Adjust for the clearest sound. Adjust the VOLUME CONTROL for desired loudness. MIN MAX CD OFF RADIO Slide the FUNCTION switch to OFF position to turn off the radio. Remember to slide the MODE switch to BUZZ or AUTO position after listening, so that the buzzer alarm, CD music or radio will wake you up at your preset time. Make sure the volume control is adjusted loud enough to wake you up. 8 IB-CDR1902(AD)-WM-E-062802 7. More about radio operation PHONES jack FM ANTENNA BATTERY COMPARTMENT (at the bottom of the set) To improve broadcast reception Fully stretch out the FM ANTENNA for better FM reception. Reorient the player itself for better AM reception. Or locate the set near a window. To listen without disturbing others Connect your headphones (optional - not included) into the PHONES jack at the back of the set. The speaker will automatically be silenced. Remember to unplug the headphones if you want the set to wake you up in the morning. To use battery backup Install a 9V battery for Clock backup, so that if your home power is momentarily off, you will not have to set up the time & alarm settings. NOTE: The CLOCK display will not show the time but the time will be kept in memory and will reappear when power is restored. 9 IB-CDR1902(AD)-WM-E-062802 8. Setting the Alarm Time This set has dual alarms. You may set ALARM 1 to wake you at a certain time, or ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will sound at the time you set. This feature is useful for a husband & wife waking up at different time or a single person who likes to wake up at different time during weekdays and weekends. To set ALARM 1, slide the ALARM SET switch to position 1, the ALARM 1 lamp will turn on. To set ALARM 2, slide the ALARM SET switch to position 2, the ALARM 2 lamp will turn on. FRONT SIDE VIEW ALARM button ALARM 1 lamp ALARM 2 lamp REVERSE button FORWARD button LEFT SIDE VIEW BUZZ MAX BUZZ 1 FORWARD ALARM SET SWITCH MODE SWITCH button with 2 Press the ALARMuntil the togethershows the FORWARD button display the Slide the MODE switch to BUZZ or AUTO position. Use the ALARM button to check the alarm time. ALARM REVERSE button together with 3 Press the ALARMuntil the display shows the REVERSE button the button, the 4 Release the ALARM time of day. clock display will show the normal correct alarm minutes. desired alarm hour time and approximate alarm minute time. NOTE 1:When the ALARM SET switch is slided to ALARM 1+2 position, only ALARM 2 time but not ALARM 1 time can be set. NOTE 2: If you want to be waked up in the morning, the PM lamp should be off on alarm time (when pressing ALARM button). To change PM to AM time, advance time 12 hours. NOTE 3: To wake to ALARM 1 time, slide ALARM SET switch to position 1. To wake to ALARM 2 time, slide ALARM SET switch to position 2. To wake to both times, slide ALARM SET switch to position 1+2. 10 IB-CDR1902(AD)-WM-E-062802 9. Waking up to alarm or music NOTE:When the MODE switch is set to ON, the ALARM 1 or ALARM 2 lamp will not light up and no alarm buzzer, CD music or radio will come out. 1. Waking up to alarm BUZZ 1. Set the MODE switc ...