® 3 CD HOME STEREO AM/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL OPERATING INSTRUCTIONS MODEL SL-6703 PROGRAMMABLE CD PLAYER WITH REPEAT PLAY FLUORESCENT MULTI-COLOR VFD DISPLAY INCLUDES MULTI-FUNCTION REMOTE CONTROL DIGITAL KARAOKE SYSTEM RECEIVES AM/FM STEREO BROADCASTS EASY TO OPERATE CONTROLS RECORDS FROM CD, TAPE OR RADIO DELUXE DYNAMIC SPEAKER SYSTEMS PLEASE READ CAREFULLY BEFORE USE IB-SL6703(TA)-PRADO-E-091802 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in SERVICE the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightening storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus. 1 10. 11. 12. 13. 14. IB-SL6703(TA)-PRADO-E-091802 ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 5. Do not connect FM antenna wire to any outdoor antenna. It is the intent of Lenoxx that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever recording songs from the RADIO or CDs. Do not apply oil or petroleum products or solvents to any part of this set. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on the bottom of the set. 2 IB-SL6703(TA)-PRADO-E-091802 CONNECTING THE AC POWER CORD Insert one end of the supplied AC power cord into the socket located at the back of the set, and the other end to the wall outlet. TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fit one way into the wall outlet and back of the set. AC SOCKET To a wall outlet ATTACHING THE SPEAKERS 1.Bring one of the speaker to the left side of the set. 2.Carefully unwind one piece of the speaker wire cord (included), and plug one red end into the left plug of Speaker Jack L (marked L), and the black end into the left Grounding Jack (marked G). 3.Repeat above steps 1 to 2 for the right side speaker. Simply connect the cables appropriate end (cable is not included) usually RCA JACKS to the CD/AUX INPUT of the set and the mini plug to the AUX OUT jack on your CD player. YOUR CD PLAYER CONNECTING CD/AUX INPUT TO AUX OUT JACK OPTIONAL CABLE (3.5mm) TO RCA JACKS TO CD/AUX INPUT JACKS 3 IB-SL6703(TA)-PRADO-E-091802 REMOTE CONTROL You can control the CD PLAYER with the provided REMOTE CONTROL (including the functions of POWER ON/OFF, MUTE, CONTINUOUS PLAY, DISC CHANGE, VOLUME control, CD REPEAT and PLAY features). NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER, make sure the POWER switch on the main set is turned on, otherwise, the REMOTE CONTROL will have no functions to the set. 1 1. POWER ON/OFF 2. MUTE 3. CONTINUOUS PLAY 4. DISC CHANGE 5. REPEAT - ONE & ALL SONGS 6. VOLUME UP/DOWN 7. SKIP BACKWARD 8. SKIP FORWARD 9. STOP/PROGRAM 1 0 . PLAY/PAUSE 2 3 4 5 6 10 9 8 7 NOTE: When you press the POWER ON/OFF switch to shut the set off, the VFD display will go out, and the STANDBY indicator on the main set will turn on. Slide the battery cover to remove. Insert 2 size AAA batteries correctly so that the + and - polarities match the polarity diagrams inside the battery compartment. NOTE: About half a year of normal operation can be expected when using the alkaline batteries. when the batteries are exhausted, the remote control will no longer operate the system. Replace both batteries with new ones. When the remote control is not to be used for a long time (2 months or more), remove the batteries to avoid possible damage that may be caused by battery leakage. Avoid keeping the remote control in extremely hot or humid locations. The remote controls operating distance is about 0.2m (8 inches) to 6m (20 feet) away from the remote sensor. 4 IB-SL6703(TA)-PRADO-E-091802 "A A A " "A A A " PLAYING A CD 1 4 3&5 6 2 7 Connect the supplied AC power cord (see page 3). 1 2 3 4 5 6 7 TIP: Press the POWER switch, the VFD display will turn on. Slide the FUNCTION switch to CD position, the disc tray will be automatically set to DISC 1 position and read the disc on it, will show on the VFD display. Open the CD DOOR by pressing the OPEN/CLOSE button and place the CD in the NO.1 disc compartment. The label side of the CD should face upward. Press the DISC CHANGE button to revolve the tray clockwise. Place other disc(s) on the disk holder(s). Close the CD DOOR by pushing the OPEN/ CLOSE button. The corressponding dics number indicator will be on and the display will show the corresponding dics number, such as , or . Press the CD PLAY button. The player will play all the 3 discs continuously, will show steadily on the VFD. The corresponding disc indicator will flash, and the display will show the track number of current playing. You may rotate the TONE control counterclockwise to intensify bass, and clockwise to intensify the treble. WILL SHOW IN THE DISPLAY IF THERE IS NO DISC IN THE CD COMPARTMENT OR IF THE DISC IS UPSIDE DOWN. 5 IB-SL6703(TA)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL OPERATIONS DISC buttons DISC CHANGE TIP When CD play is paused, will flash and no music will play. FUNCTION SWITCH VOLUME CONTROL To Adjust the volume Stop playback To resume play, press the PAUSE button again, will stop flashing and music will play. Pause playback Press or Adjust VOLUME control STOP PLAY/PAUSE will flash during pause. Press again to resume play after pause. TIP If you bump the set or the table it is sitting on, during CD play, the music will stop or skip for a few seconds. This is normal for this type of player. Go to the next track Go back to the previous track Locate a point in a song FORWARDS BACKWARDS or Press and hold down while playing until you find the point. Press DISC CHANGE, or press the DISC button (DISC 1, DISC 2 or DISC 3) directly. on the REMOTE. Change the discs TIP This set has an electronic volume control, you may raise or lower the volume by pressing the VOLUME UP and DOWM buttons. Cancel 3 discs continuously Press playing function. Remove the CD To turn off the sound instantly Turn off the power 6 Press OPEN/CLOSE (press STOP first). Press the MUTE button on the REMOTE. Press the POWER switch, the display will go off. IB-SL6703(TA)-PRADO-E-091802 REPEAT PLAY PLAYING CD SONGS (TRACKS) OVER AND OVER You can play CD tracks over and over in normal or programmed play modes (see page 8). POWER SWITCH REPEAT FUNCTION SWITCH 1. 2. 3. 4. Press the POWER switch, the display will light up. Set the FUNCTION switch to CD position. Select the track by pressing or , and then press Press the CD REPEAT button. . To repeat a single track (song) Press Press the REPEAT button once Display shows REP will flash. all the tracks (all songs) Press the REPEAT button twice programmed tracks During programmed play, press the REPEAT button twice REP will be steady on REP is steady on To cancel Repeat Play Press the REPEAT button until the REP goes off. 7 IB-SL6703(TA)-PRADO-E-091802 PROGRAMMED CD PLAY SELECTING YOUR OWN MUSIC PLAYING ORDER You can make a program of up to 15 tracks to play in the order you want them to be played. NOTE: Programming is only done during stop mode. PROGRAM 1 2 3 4 5 During STOP mode, press the PROGRAM button. PRG. will flash in the display. Press the SKIP/SEARCH buttons either or until the desired track shows in the display. Press the PROGRAM button to confirm, PRG. will flash in the display. Repeat steps 2&3 until all the desired tracks are programmed. Press the PLAY button to start programmed play. , PRG. and the track number being played will show in the display. To change the current program Just create a new program following the programing procedure. To cancel Program Play Press the STOP button on the main set or STOP/PROGRAM button on the REMOTE control twice, PRG. will disappear from the display. 8 IB-SL6703(TA)-PRADO-E-091802 LISTENING TO THE RADIO 1 FM MODE Connect the supplied AC power cord (see page 3). 2 63 4 1 2 3 4 Press the POWER switch, the VFD display will turn on. Set the FUNCTION switch to RADIO position. Set the BAND switch to the proper band position (AM or FM), and set the FM MODE switch to STEREO or MONO. Tune into the station you prefer using the TUNING control. Adjust for the clearest sound. 5 6 This indicator will light up when receiving FM Stereo broadcasts. You may rotate the TONE control counterclockwise to intensify bass, and clockwise to intensify the treble. 9 IB-SL6703(TA)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FM MODE FUNCTION VOLUME TIP · If the FM broadcast is To Adjust the volume Turn off the Radio Press or Set VOLUME control (UP or DOWN). Set the FUNCTION switch to TAPE position or press the POWER switch. noisy, set the FM MODE switch from STEREO to MONO. set has an electronic volume control, you may raise or lower the volume by pressing the VOLUME UP and DOWN buttons. · This To improve AM broadcast The AM antenna is magnetic bar within the reception system. Change position of the set for the best AM reception. To improve FM broadcast Unwrap and fully extend the FM antenna for the reception best FM reception. FM ANTENNA To turn off the sound instantly Press the MUTE button on the REMOTE. 10 IB-SL6703(TA)-PRADO-E-091802 PLAYING A TAPE 1 2 4 3 Connect the supplied AC power cord (see page 3). 1 2 3 STOP/EJECT Press the POWER switch, the VFD display will turn on. Set the FUNCTION switch to TAPE position. F U LL REEL A EM PTY REEL Press the STOP/EJECT button (DECK A or DECK B) to open the tape compartment and insert a recorded tape. Close the door. Press the PLAY button. The player turns on and starts playing. IN S E R T T H IS W AY 4 PLAY 5 AUTO STOP When the set finishes playing one side of the tape, the set will stop. To hear the other side of the tape, flip the tape over, then insert and press PLAY. 1 ...