SM1300GB 7/8/04 5:30 PM Page 1 Wireless Weather Station SM1300 + ASM20 - Owners manual INTRODUCTION Congratulations on your purchase of this weather station, MeteoClock SM1300. Please take the time to read and understand this manual so you can begin to enjoy the convenience and features this product has to offer. What exactly is a Weather Station? Lexibook digital stations measure not only the time in progress - thanks to their built-in clock - but also the actual weather! The MeteoClock SM1300 incorporates different functions: - Thermometer: Temperature is displayed in real time to the nearest tenth of a degree Celsius. Thanks to its wireless sensor, the station can sense from a distance the outside temperature or that of another room! - Hygrometer: Outdoor or indoor hygrometry is expressed in percentage of humidity in the ambient air. The ideal "Comfort" Zone for the human body ranges from 35 to 65% hygrometry for a given temperature in between 18 and 24ºC. Copyright © Lexibook 2004 1 SM1300GB 7/8/04 5:30 PM Page 2 FEATURES Main Display Unit SM1300: " dual clock and dual alarm " calendar (day/month/year) " local temperature and humidity display " receives and displays temperature and humidity from up to 4 remote transmitters via RF technology of 433MHz " maximum/minimum temperature records " temperature and humidity trend indicator " weather report symbols " moon phase symbols " LED Backlight " user-selectable °C or °F " battery type: 2 x AA size Remote Sensor ASM20: " drip-proof design with LCD " temperature display in user-selectable °C or °F " humidity display " transmission range: up to 40 meters in open area " battery type: 2 x AA Button placement GETTING STARTED MODE/SNOOZE: scrolls through Clock 1 & 2, Alarm 1 & 2, Date & Year, and Temperature Alarm (high & low) mode; snooze for alarm. HOUR/+/MAX: shows maximum temperature; adjusts clock, alarm, date & year and temperature alarm values. MINUTE/-/MIN: shows minimum temperature; adjusts clock, alarm, date & year and temperature alarm values. ALARM/ °C/°F: toggles between C and F, 12 and 24 hour format, Alarm 1 & 2 on and off; disables (resets) high & low temperature alarms CHN: scrolls through remote channels (1 to 4); scrolls through local and remote channels (1 to 4) in (high & low) temperature alarm mode. LCD display. SET: enter to House code and Channel setting mode. °C/°F: hange between °C or °F, change channel and house code. Battery compartment. LCD display. Wall Mount Holder & Table Stand. 2 Copyright © Lexibook 2004 Copyright © Lexibook 2004 3 SM1300GB 7/8/04 5:30 PM Page 4 GETTING STARTED Battery installation remove battery cover 2 AA size batteries (SM1300) 2 AA size batteries (ASM20) Insert between terminals observing proper polarity then replace cover LOW BATTERY INDICATION: Low battery indication will be indicated (for both indoor & outdoor). On transmitter, will be displayed. Setting remote transmitters Insert batteries to start setup HOUSE CODE will flash for 8 seconds Select HOUSE CODE (1-15) by pressing °C/°F and then press SET Transmitters for each receiver must be set to the same HOUSE CODE and pressing SET CHANNEL will flash for 8 seconds Select CHANNEL(1-4) by pressing °C/°F and then press SET Humidity & Temperature will display Select °C or °F of Temperature by pressing °C/°F key * Use a different house code if your weather station detecTs other signals from neighboring sources * Factory default: house code = 01 and channel = 01 SYNCHRONIZATION SETUP Automatic Learn Function Learn function executes automatically and runs for approximately 3 minutes when batteries are first installed in the receiver. Within these 3 minutes, receiver picks up the temperature & humidity signals from remote transmitter and displays the readings. Manual-Learn (Searching for Remote Signals) If a new remote transmitter is added or if signal is lost (outdoor display blinking), learn function must be executed again. Press and hold CHN for 3 seconds to start Beep sound indicates that learn function has started 'Channel' symbol will flash and unit will beep as each remote transmitter is detected Temperature & humidity readings of remote transmitter display on the receiver. 4 Copyright © Lexibook 2004 Copyright © Lexibook 2004 5 SM1300GB 7/8/04 5:30 PM Page 6 CLOCK SETTING Clock 1 Setting Press and hold MODE/SNOOZE for 3 seconds to enter the clock setting mode (the CLOCK 1 symbol appears and the time will flash). Press Hour/+/Max to set the hour and Minute/-/Min to set the minute. Press ALARM / °C/°F during clock setting, to change between 12 and 24 hour display. This also will end clock setting. Press MODE/SNOOZE or do not press any key for 1 minute to finish clock setting. Clock 2 Setting Scroll to Clock 2 mode using MODE/SNOOZE. Press Hour/+/Max or Minute/-/Min key increments/decrements relative to Clock 1). DATE, YEAR & ALARM SETTING Date Setting: Scroll to date mode using MODE/SNOOZE. Press HOUR/+/MAX/ to set month. Press Minute/-/MIN to set date. Weekday is automatically determined from the year/month/day setting. February will have either 28 or 29 days depending on the year setting. Year Setting Scroll to YEAR mode using MODE/SNOOZE. Press + or - key to adjust year. Alarm 1and Alarm 2 Setting Scroll to Alarm1 mode (Alarm2 mode) using MODE/SNOOZE. Press Hour/+/MAX to set hour. Press Minute/-/Min to set minute. Press Alarm °C/°F to toggle alarm on and off. When the alarm is set ON, the 'on' symbol will appeart. to change the hour (in one hour 6 Copyright © Lexibook 2004 Copyright © Lexibook 2004 7 SM1300GB 7/8/04 5:30 PM Page 8 When Alarm Sounds 1 or 2 will flash Press MODE/SNOOZE to snooze the alarm for 5 minutes. After that the alarm will sound again. Press ANY other key will shut off the alarm. Without interruption, alarm will shut off automatically after one minute. WEATHER DISPLAY Check Local Temperature (Inside) After insert batteries, local temperature will display. Check Remote Temperature & Humidity Press CHN to toggle between Channel 1, 2 and 3. Temperature and humidity readings will alternate on the receiver. °C or °F Temperature Display MOON PHASE The moon phase is automatically updated according to the year/month/day. Moon Phase Display: New Moon Young Crescent First Quarter Waxing Gibbous Full Moon Waning Gibbous Last Quarter Old Crescent Toggle between °C and °F by pressing Alarm °C/°F at Clock2 mode. Min and Max Temperature & Humidity Press Minute/-/Min in Clock1 mode to display minimum temperature and humidity. Press Hour/+/MAX in Clock1 mode to display maximum temperature and humidity. Note: Min/Max readings are automatically cleared daily at 00:00. 8 Copyright © Lexibook 2004 Copyright © Lexibook 2004 9 SM1300GB 7/8/04 5:30 PM Page 10 WEATHER DISPLAY Temperature & humidity trend The trend indicator shows the trend of temperature and humidity determined by the particular transmitter in the past half-hour interval. TEMPERATURE ALARM You can set up to 5 high temperature alarms - one local and one for each of the four remote channels. High temperature alarm Scroll to high temperature alarm mode using MODE/SNOOZE. and or existing preset will flash. Select channel (1, 2, 3, 4 or local) using CHN. Press + or - key to set the high temperature limit value. To disable particular alarm, press Alarm°C/°F; dashes = alarm disabled. Press MODE/SNOOZE to finish. Repeat steps to for all other channels if desired. Weather report symbols The receiver is able to monitor and display the weather status based on collected data from Channel 1. About Snow Freeze Warning * Snow symbol will flash to warn of 'snowing'. * Activated when Channel 1's temperature is between -1.9 °C and +2.9 °C. * Snow will appear solid if and when Channel 1's temperature falls below -1.9 °C: it is freezing. Note: * Initially, the weather will be cloudy. * Remote transmitter Channel 1 will be used for weather indication. * If Channel 1 is empty, then weather will always be cloudy. * If Channel 1 has no humidity data, weather indication will always be cloudy, but freeze warning and snow indication will be available. Low temperature alarm Scroll to high temperature alarm mode using MODE/SNOOZE. and or existing preset will flash. Select channel (1, 2, 3, 4 or local) using CHN. Press + or - key to set the low temperature limit value. To disable particular alarm, press Alarm°C/°F; dashes = alarm disabled. Press MODE/SNOOZE to finish. 10 Copyright © Lexibook 2004 Copyright © Lexibook 2004 11 SM1300GB 7/8/04 5:30 PM Page 12 Repeat steps to for all other channels if desired. When temperature alarm sounds It is to alert that the temperature has exceeded the preset temperature limit. Press any key to stop temperature alarm; or If no key is pressed, the temperature alarm will automatically stop itself after one minute. Once triggered, temperature alarm comes on as a distinctive sound, different to that of Alarm1 and Alarm2. Problem: TROUBLESHOOTING Solution : Re-synchronize receiver by holding CHN for 3 seconds until a beep is heard. The temperature measurement of remote transmitter and receiver does not match. Temperature reading of the outdoor remote transmitter seems too high. Receiver is no longer receiving remote transmitter signals or display. BACKLIGHT This Weather Station is equipped with Backlight function. Pressing any key will turn on the backlight function. To save energy, you can select to Turn Off the backlight by executing the following steps: Hold MODE/SNOOZE key to enter the clock setting mode; Press CHN key can enable /disable this feature. Ensure the remote transmitter is out of direct sunlight, and away from sources of heat. Repeat the learning procedures. - Temperature may be below -30°C. - Batteries in remote transmitter may need changing. - Move remote transmitter closer to the receiver. - Make sure remote transmitter is away from sources of electrical disturbance. 12 Copyright © Lexibook 2004 Copyright © Lexibook 2004 13 SM1300GB 7/8/04 5:30 PM Page 14 ACCESSORIES Additional sensor : Mesure temperature and hygrometry in other places! - upstairs - in the baby's bedroom - in the basement - in the garden - in another room To order: 0808 100 3015 or www.lexibook.com WARRANTY This product is covered by our two-year warranty. To make use of the warranty or the after-sales service, please contact your retailer and supply proof of purchase. Our warranty covers material or installation-related defects attributable to the manufacturer, with the exception of wear caused by failure to respect the instructions for use or any unauthorised work on the equipment (such as dismantling, exposure to heat or damp, etc.). For technical assistance call 0808 100 3015 Web: http://www.lexibook.co.uk Email: infouk@lexibook.com 14 Copyright © Lexibook 2004 ...