User manual LEXMARK 2200

2200 Series All-In-One Safety information · Use only the power supply provided with this product or the manufacturer's authorized replacement power supply. · Connect the power supply cord to an electrical outlet that is near the product and easily accessible. · Refer service or repairs, other than those described in the user documentation, to a professional service person. 1 Unpack your All-In-One. 2 Connect the power supply cord. 3 Make sure the power light is on. CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm. For more help: 1 Refer to your User's Guide. 2 Visit our Web site. http://support.lexmark.com/ 3 Call us at (800) 332-4120. Monday - Friday (9:00 AM - 9:00 PM EST) Saturday (Noon - 6:00 PM EST) Phone number and support times may change without notice. 1 2 May not be included 4 Raise the paper support and extend the paper exit tray. 5 Lift the scanner unit. 6 1 2 Remove the sticker and tape from the print cartridge(s). 7 Insert the cartridge(s) and snap the lid(s) closed. Left Right 1 2 3 4 21T0070 www.lexmark.com P/N 21T0070 EC 21T004 © 2003 Lexmark International, Inc. All rights reserved. 8 Close the scanner unit. 9 Load paper, and adjust the paper guide. See "Setting up without a computer" in the User's Guide if you are using your All-In-One without a computer. 10 Make sure the computer is on. 1 3 2 Continue, if you are using your All-In-One with a computer. 11 Connect the USB cable. 12 Important! Click Cancel on all Add New Hardware screens. 13 Insert the CD. 14 Install the software. Windows Windows 1 2 Macintosh Continue with step 13. When I insert the CD, nothing happens Windows 1 Eject and reinsert the printer software CD. If the printer software installation screen does not appear, continue to the next step. 2 From your desktop, double-click My Computer (In Windows XP, click Start My Computer). 3 Double-click the CD-ROM drive icon. If necessary, double-click setup.exe. 4 When the printer software installation screen appears, click Install. 5 Follow the instructions on each screen to complete printer software installation. Macintosh 1 Remove the All-In-One software CD, and then restart your computer. 2 Insert the All-In-One software CD. 3 Double-click the Install icon. 4 Follow the instructions on each screen to complete printer software installation. 14 Install the software. 1 Macintosh 2