User manual LEXMARK X7170 - Install Guide

7100 Series All-In-One Safety information · Use only the power supply provided with this product or the manufacturer's authorized replacement power supply. · Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. · Refer service or repairs, other than those described in the user documentation, to a professional service person. CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm. ?? ? 1 Unpack your printer. Sold separately. For more help: 1 See the User's Guide. 2 Visit our Web site: http://support.lexmark.com/. 3 Call us at 1-800-332-4120. Monday­Friday (9:00 AM­9:00 PM EST) Saturday (Noon­6:00 PM EST) *Phone number and support times may change without notice. See the User's Guide for a listing. 2 1 Load paper. 2 Load plain paper in the paper tray. Raise the paper exit tray, and then extend the paper guide. 3 Adjust the paper guides. 4 Lower the paper exit tray, and then extend the paper stop. 3 1 Prepare the All-In-One. 2 Connect the telephone line. See the User's Guide before adding additional equipment. Add a telephone. Add a telephone and answering machine. Make sure the power cord is pushed all the way into the connector. 2 1 2 1 3 1 1 2 2 3 4 3 Press Power. 4 Press + to scroll, and then press Select to enter your default language, and then your default country or region. 51 2 3 Press the keypad to enter the: Date using two digits for the month, day, and year. Time using the two digits for both hour and minute. Fax number. Press Select. Press Select. Press Select. 2 1 *21H0070* P/N 21H0070 E.C. 21H003 © 2004 Lexmark International, Inc. All rights reserved. Continue with Step 4... 4 1 Install the print cartridges. 2 Remove the sticker and tape from the print cartridges. Open the scanner unit. 3 Insert the print cartridges. 4 Close the scanner unit. Left Right 1 2 1 2 3 If you are using your All-In-One with a computer, continue with the following step. If you are using your All-In-One without a computer, you are finished. Windows 5 Install the software. 1 Make sure your computer is on. 2 Connect the USB cable. 3 Click Cancel on all New Hardware Screens. 2 1 ! To prevent errors during installation: 1 Close all open programs. 2 Temporarily disable any anti-virus software. For help, refer to your program documentation, or contact the software manufacturer for support. 4 Insert CD1. 5 Click Install. Important: After installation is complete, remember to enable your anti-virus software. If this install screen does not appear, click Start Run and then type D:\setup, where D is the letter of your CD-ROM drive. Macintosh 5 Install the software. 1 Make sure your computer is on. 2 Connect the USB cable. 3 ! To prevent errors during installation: 1 Close all open programs. 2 Temporarily disable any anti-virus software. For help, refer to your program documentation, or contact the software manufacturer for support. Important: After installation is complete, remember to enable your anti-virus software. Insert CD1. 4 1 Double-click: 1 2 2 www.lexmark.com