ENGLISH LCD TV OWNER'S MANUAL LCD TV MODELS 26LG3*** 32LG3*** 37LG3*** 42LG3*** 47LG3*** Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. Refer to the label on the back cover and quote this information. To your dealer when requiring service. P/NO: MFL41410110 (0804-REV00) Printed in Korea ACCESSORIES ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. TV S Q. TB ME NU ME NU PO W ER IN DV D PU T OK RE TU RN PIP AV MO DE Owner's Manual TI M E IN DE X SI ZE HO LD FA V 1 4 7 LIS T MU TE P 2 5 8 6 9 Q.VIE W 3 0 Owner's manual UP DA TE TE XT RE VE AL Owner's Manual Batteries Remote Control Power Cord (Only 26/32/42LG3***) x4 x4 or protection cover Screw for stand fixing (Refer to P. 9) Bolts for stand assembly (Refer to p.6) (Only 26/32/37/42LG3***) *Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Polishing Cloth Polishing cloth for use on the screen This feature is not available for all models. Do not use excessive force. This may cause scratching or discolouration. 1 CONTENTS A C C E S S O R I E S .....................................................1 CONTENTS Auto Programme Tuning............................................ 35 Manual Programme Tuning ....................................... 36 Fine Tuning .....................................................................37 Assigning a Station Name ..........................................38 Booster............................................................................39 Programme Edit ........................................................... 40 Favourite Programme .................................................. 41 Selecting the Programme List .................................. 42 .................................................................. 43 Key lock.......................................................................... 45 AV Mode .........................................................................46 PREPARATION Front Panel Controls................................................... 4 Back Panel Information .............................................. 5 Stand Installation ........................................................ 6 Please set it up carefully so the product does not fall over. . . . . . . . . . . . . . . . . . . . . . . . . . .7 Back Cover for Wire Arrangement........................... 8 Swivel Stand ................................................................. 9 Desktop Pedestal Installation ................................. 10 Wall Mount: Horizontal installation....................... 1 1 Not using the desk-type stand................................1 1 Antenna Connection ................................................ 12 PICTURE CONTROL PICTURECONTROL Watching PIP(Picture-in-Picture) .............................47 Picture Size (Aspect Ratio)Control.........................48 Preset Picture Settings - Picture Mode-Preset............................................50 - Auto Colour Tone Control(Cool/Medium/Warm) 51 Manual Picture Adjustment - Picture Mode-User Option................................52 - Colour Tone - User Option...............................53 - Picture Improvement Technology...................54 Advanced - Gamma......................................................55 Advanced - Film Mode ................................................56 Advanced - Black(Darkness) Level...........................57 Advanced - Eye Care ...................................................58 Picture Reset..................................................................59 Power Indicator .............................................................60 Factory Reset .................................................................61 EXTERNAL EQUIPMENT SETUP HD Receiver Setup .......................................................13 DVD Setup..................................................................... 16 VCR Setup ..................................................................... 19 Other A/V Source Setup .......................................... 22 PC Setup .........................................................................23 - Screen Setup for PC Mode................................26 WATCHING TV / PROGRAMME CONTROL WATCHING TV /PROGRAMME CONTROL Remote Control Key Functions..................................30 Turning on the TV....................................................... 32 Programme Selection ................................................. 32 Volume Adjustment......................................................32 Quick Menu................................................................... 33 On Screen Menus Selection and Adjustment ......34 2 SOUND & LANGUAGE CONTROL Auto Volume Leveler ....................................................62 Preset Sound Settings - Sound Mode ....................63 Sound Setting Adjustment - User Mode ...............64 Balance ............................................................................65 TV Speakers On/Off Setup .......................................66 I/II - Stereo/Dual Reception ....................................... 67 - NICAM Reception ....................................................... 68 - Speaker Sound Output Selection.................... 68 On-Screen Menu Language Selection ...................... 69 APPENDIX Troubleshooting ............................................................77 Maintenance .................................................................79 Product Specifications ................................................80 Programming the Remote Control ......................... 81 IR Codes ....................................................................... 83 External Control Through RS-232C ..................... 85 CONTENTS TIME SETTING Clock Setup......................................................................70 Auto On/Off Timer Setting .........................................71 Sleep Timer Setting........................................................72 Auto Shut-off Setting...................................................73 TELETEXT Switch On/Off ..............................................................74 SIMPLE Text....................................................................74 TOP Text .........................................................................75 FASTEXT .........................................................................75 Special Teletext Functions..........................................76 3 PREPARATION FRONT PANEL CONTROLS I I This is a simplified representation of the front panel. Image shown may differ from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. PREPARATION POWER Remote Control Sensor Power/Standby Indicator · illuminates red in standby mode. · illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in P PROGRAMME + VOLUME - OK OK MENU MENU INPUT INPUT the Option menu. 4 BACK PANEL INFORMATION A Image shown may differ from your TV. PREPARATION S-Video Input Connect S-Video out from an S-VIDEO device. 1 2 3 RS-232C IN (CONTROL) 4 Audio/Video Input Connect audio/video output from an external device to these jacks. HDMI/DVI IN 1 HDMI IN 2 RGB(PC) (RGB/DVI) AV IN 1 VIDEO 2 HDMI IN 2 L(MONO) AUDIO R HDMI/DVI IN 1 RGB IN SPEAKER OUT 1 AUDIO - MONO(8 AUDIO + ) VIDEO 2 RGB IN ANTENNA IN AUDIO COMPONENT IN AV 5 VIDEO 6 7 1 8 VARIABLE AUDIO OUT COMPONENT IN 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB/Audio Input Connect the monitor output from a PC to the appropriate input port. RS-232C Input (CONTROL) Port Connect the serial port of the control devices to the RS-232C jack. (This feature is not available for all models.) 5 Audio/Video Input (AV IN 1) Connect audio/video output from an external device to these jacks. SPEAKER OUTPUT Audio out for a external speaker system. Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. 6 2 7 3 8 4 5 PREPARATION STAND INSTALLATION 26/32/37/42LG3*** I I Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, thep roduct can tilt forward after the product installation.) If you tighten the bolt with excessive force, the boltcan deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. PREPARATION 1 3 Assemble the TV as shown. 2 Assemble the parts of the S t a n d B o d y with the C o v e r B a s e of the TV. 4 Fix the 4 bolts securely using the holes in the back of the TV. Stand Body Cover Base 6 PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. A A PREPARATION 1 2 1 2 1 Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with bolts to the wall. Ensure that both brackets are even. 2 3 3 Use a strong cord to secure the TV. Secure the cord in such a way that it becomes taught when the TV is in position. ! NOTE G G G When moving the TV undo the cords first. Use a platform or cabinet string and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. 7 PREPARATION BACK COVER FOR WIRE ARRANGEMENT PREPARATION 1 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual. 2 Open the C A B L E M A N A G E M E N T C L I P as shown and manage the cables. CABLE MANAGEMENT CLIP 3 Fit the C A B L E M A N A G E M E N T C L I P as shown. ! NOTE Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. G 8 SWIVEL STAND This feature is not available for all models. After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position. PREPARATION Attaching the TV to a desk (Only 26/32/42LG3***) The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. Stand 1-Screw (provided as parts of the product) Desk ! WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. 9 PREPARATION I I The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. 10 PREPARATION Power Supply Circuit breaker EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. DESKTOP PEDESTAL INSTALLATION For adequate ventilation allow a clearance of 4" (10cm) all around the TV . 4 inches 4 inches 4 inches 4 inches WALL MOUNT: HORIZONTAL INSTALLATION For adequate ventilation allow a clearance of 4" (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall. PREPARATION 4 inches 4 inches 4 inches 4 inches 4 inches NOT USING THE DESK-TYPE STAND When installing the wall-mounted unit, use the protection cover for desk-type stand installation. or 11 PREPARATION I To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. I An antenna cable and converter are not supplied. I ...