User manual LG 42LG6100

User's Guide Specification 1. Model Description MODEL SUFFIX 32/37/42/47LG6000-ZA BRAND Product Name LG Part No. MFL41425803 32/37/42/47LG6000-ZA EU 2. Printing Specification 1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors · Cover : 1 COLOR (BLACK) · Inside : 1 COLOR (BLACK) 3. Stock (Paper) · Cover : Coated paper, S/W 150 g/ · Inside : Uncoated paper , 60 g/ 4. Printing Method : Off-set 5. Bindery : Perfect bind 6. Language : EN/GE/FR/IT/SP/PO/NE/GR/HU/PL/CZ/SK/RO/BU/ SW/NO/DA/FI/ES/LAT/LITH /SV/SER/CRO/TUR (25) 7. Number of pages : 404 N O T E S "This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. (2) Especially, Don't use or contain lead(Pb) and cadmium(Cd) in ink. 3. Special Instructions (1) Origin Notification * LGEIN : Printed in Indonesia * LGESP : Printed in Brazil * LGEND : Printed in China * LGEMA : Printed in Poland * LGEWA : Printed in U.K. * LGEMX : Printed in Mexico * LGEIL : Printed in India 4. 10 9 8 7 6 5 4 3 2 1 REV. NO. Changes Apr.11.08 Jeon Mi Jeong Feb.29.08 Jeon Mi Jeong Feb.14.08 Jeon Mi Jeong S8-16567 S8-11666 S8-09690 1. Added the Language(SER,CRO,TUR).2. Changed the bolts for stand assembly Added the contents of "Schemi elettrici e norme di taratura disponibili nel CD ROM " on Italy cover . Updated the contents of "Select mode". MM/DD/YY CHANGE NO. CHANGE CONTENTS Pagination sheet Front cover 2 P/no. Uk ONLY Back cover ..... ..... ..... 16 Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Pagination sheet Front cover 2 ..... ..... ..... ..... 15 Back cover Back cover Front cover 2 ..... ..... ..... ..... 15 Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Pagination sheet Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... 15 Back cover Front cover 2 ..... ..... ..... ..... ..... Back cover ---- 17 LCD TV OWNER'S MANUAL LCD TV MODELS 3 2 L G 6 0* * 3 7 L G 6 0* * 4 2 L G 6 0* * 4 2 L G 6 1* * 4 7 L G 6 0* * Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service. Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) I D N u m b e r ( s ) : 5102: 32LG6000 5103: 37LG6000 5104: 42LG6000 5484: 42LG6100 5105: 47LG6000 An extended Owner's Manual that contains information on the advanced features of these LG TV sets is located on the CD- ROM provided in an electronic version. To read these files, you will need to use a Personal Computer (PC) equipped with a CD- ROM drive. P/NO: MFL41425803(0804-REV03) Printed in Korea Connecting your Unit I ENGLISH Here shown may be somewhat different from your set. .................................................. 2 DVD/STB 2 VCR Connection 3 Power Cord 1 Antenna Connection * To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section in CD Manual. 2 SAFETY INSTRUCTIONS · Please read these safety precautions carefully before using the product. · In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction. ENGLISH WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. Precaution in Installing the Product WARNING Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur. CAUTION Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Precautions in Moving the Product Do not use the product in damp place such as a bathroom or any place where it is likely to get wet. - This may cause a fire or could give an electric shock. WARNING Make sure to turn off the product. Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center. - If you continue to use without taking proper measures, electrical shock or fire can occur. CAUTION Do not shock the product when moving it. - You may be electrocuted or the product can be damaged. CAUTION Install the product on a flat and stable place that has no risk of dropping the product. - If the product is dropped, you may be injured or the product may be broken. Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair. Keep the product away from direct sunlight. - The product can be damaged. Precautions in Using the Product WARNING Do not disassemble, repair or modify the product at your own discretion. Do not place the product in a built-in installation such as bookcase or rack. - Ventilation required. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. Electrical Power Related Precautions WARNING Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not keep a still image on the screen for an extended period (e.g. by pausing a video) as the fixed image may remain visible on the screen. This is know as image burn. Image burn is not covered under the manufacturer's warranty. Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. - You may be electrocuted due to excess moisture. During a thunder or lightning storm, unplug the power cable or signal cable. - You may be electrocuted or a fire can break out. 3 PREPARATION FRONT PANEL CONTROLS I I ENGLISH Image shown may differ from your TV If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth. P P PROGRAMME P VOLUME OK Intelligent Sensor Adjusts picture according to the surrounding conditions MENU OK MENU INPUT INPUT POWER Remote Control Sensor Power/Standby Indicator · Illuminates red in standby mode. · Illuminates White when the TV is switched on. Note: You can adjust P o w e r I n d i c a t o r in the OPTION menu. NOT USING THE DESK-TYPE STAND Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover for desk-type stand installation. I After removing the protection paper from the protection cover, adhere it to the TV as shown. 4 BACK PANEL INFORMATION A ENGLISH Image shown may differ from your TV. HDMI Input Connect a HDMI signal to HDMI IN. USB Input 2 3 4 1 PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) 5 1 6 7 8 9 5 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. RGB Input Connect the output from a PC. RGB/DVI Audio Input Connect the audio from a PC or DTV. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. Component Input Connect a component video/audio device to these jacks. Audio/Video Input Connect audio/video output from an external device to these jacks. OPTICAL DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks Antenna Input Connect RF antenna to this jack. 6 2 3 7 8 4 9 5 PREPARATION STAND INSTALLATION (32/37/42LG60** , 42LG61** Only) I Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. ENGLISH 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 3 Assemble the TV as shown. 2 Assemble the parts of the S t a n d B o d y with C o v e r B a s e of the TV. 32LG60** Stand Body 37LG60** 4 Fix the 4 bolts securely using the holes in the back of the TV. Cover Base 42LG60** , 42LG61** Stand Body Cover Base 6 PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOESN'T FALL OVER. You should purchase necessary components to fix the TV to the wall on the market. A Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. A BACK COVER FOR WIRE ARRANGEMENT I ENGLISH Image shown may differ from your TV. Align the hole with the tab on the C A B L E M A N A G E M E N T C L I P. Turn the C A B L E M A N A G E M E N T C L I P as shown. Note that excessive force might cause damage to the product when using Cable Management clip. 1 1 2 1 Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. 2 3 2 Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section. 3 Use a sturdy rope to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. ! NOTE G G G When moving the TV undo the cords first. Use a platform or cabinet strong and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. 7 PREPARATION A A The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. ENGLISH EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes (comma incorrect). Power Supply Circuit breaker DESKTOP PEDESTAL INSTALLATION For adequate ventilation allow a clearance of 4" (10cm) all around the TV. P 4 inches 4 inches 4 inches 4 inches WALL MOUNT: HORIZONTAL INSTALLATION For adequate ventilation allow a clearance of 4" (10cm) all around the TV. We recommend that you use a wall mount-ing bracket of LG brand when mounting the TV to a wall. 4 inches 4 inches 4 inches 4 inches 4 inches 8 I To prevent damage do not connect to the mains outlet until all connections are made between the devices. ENGLISH ANTENNA CONNECTION I I For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. Wall Antenna Socket Multi-family Dwellings/Apartments (Connect to wall antenna socket) RF Coaxial Wire (75 ohm) Outdoor Antenna (VHF, UHF) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) UHF Antenna VHF Signal Amplifier I I In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. If signal needs to be split for two TVs,use an antenna signal splitter for connection. 9 WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the TV on from standby or off to standby. INPUT External input mode rotate in regular sequence. Switches the TV on from standby. GUIDE Shows programme schedule. THUMBSTICK(Up/Down/LeftRight) Allows you to navigate the on-screen menus and adjust the system settings to your preference. 10 ENGLISH MODE Selects the remote operating modes. Q. MENU Select the desired quick menu source. (Aspect Ratio, Backlight, Clear Voice, Picture Mode, Sound Mode, Audio, Sleep Timer, USB Eject.) MENU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. OK Accepts your selection or displays the current mode. VOLUME UP /DOWN Adjusts the volume. Programme UP/DOWN Selects a programme. Q.VIEW Returns to the previously viewed programme. Installing Batteries I Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones. Close cover. I I TURNING ON THE TV - When your TV is turned on, you will be able to use its features. ENGLISH 1 2 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. ) button on the TV or In standby mode to turn TV on, press the r / I, INPUT or P D E (or P press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on. Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the L a n g u a g e, S e l e c t M o d e, C o u n t r y, T i m e Z o n e, A u t o p r o g r a m m e t u n i n g. Note: a. It will automatically disappear after approx. 40 seconds unless a button is pressed. b. Press the RETURN button to change the current OSD to the previous OSD. c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. d "Home" mode is the optimal setting for home environments, and is the TV's default mode. e. "In Store" mode is the optimal setting for store environments. If a user modifies image quality data, "In Store" mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu. ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 OK 2 Select your desired language. OK Select your country. * If you want to change Language/ Country selection 1 2 MENU 3 Select O P T I O N. Select M e n u L a n g u a g e or C o u n t r y. OK Select your desired language or country. Save. 4 OK OK ! NOTE G G G G G If you do not finish the set-up I n s t a l l a t i o n G u i d e by pressing R E T U R N or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances. In country that Digital broadcasting regulation isn't fixed, some DTV function may not work depending on digital broadcasting circumstances. 11 WATCHING TV /PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. SETUP Auto Tuning Manual Tuning Programme Edit Booster Software Update Diagnostics CI Information : On : On 12 ENGLISH Move OK PICTURE Aspect Ratio : 16:9 Picture Mode : Standard · Backlight · Contrast · Brightness · Sharpness · Colour · Tint E Move OK AUDIO Auto Volume Clear Voice : Off : On 0 : Standard Move OK 80 90 50 60 60 0 R G Balance Sound Mode L R · SRS TruSurround XT : On · 80Hz · 220Hz · 470Hz E 0 0 0 - + + + OPTION Menu Language Audio Language Subtitle Language Hard of Hearing( Country Input Label SIMPLINK Key Lock E Move OK TIME Clock Off Time SETUP PICTURE AUDIO TIME On Time Sleep Timer Auto Sleep Time Zone : Off : Off : Off : Off Move OK : English : English : English : UK : On : Off OPTION LOCK INPUT USB ) : Off : Canary GMT LOCK Lock System Set Password Block Programme Parental Guidance Move OK INPUT Antenna AV1 AV2 Move OK USB Photo List Music List Move OK : Off : Off AV3 Component RGB HDMI1 HDMI2 E 1 MENU 2 OK Display each menu. Select a menu item. · Press the M E N U button to return to normal TV viewing. 3 OK Move to the pop up menu. · Press the R E T U R N button to move to the previous menu screen. ! NOTE G G It is possible to use T r u M o t i o n, T r u M o t i o n D e m o in 4 2 / 4 7 L G 6 0* *, 4 2 L G 6 1* * models only. It is not possible to use C I I n f o r m a t i o n and B o o s t e r in Analogue mode. AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. SETUP Auto Tuning Manual Tuning Programme Edit Booster Software Update Diagnostics CI Information : On : On Move OK ENGLISH SETUP Auto Tuning Manual Tuning Programme Edit Booster Software Update Diagnostics CI Information Move OK All service-information will be updated. Continue? : On : Onf Yes SECAM L Search No 1 MENU 2 OK Select SETUP. · Use NUMBER buttons to input a 4-digit pass- O word in L o c k S y s t e m `O n'. · If you wish to keep on auto tuning select Y E S Select Auto Tuning. using the button. Then, press the OK button. Otherwise select N O. 3 OK Select Yes. 4 OK Run Auto tuning. WHEN CONNECTING THE USB DEVICE When you connect a USB device, this screen is displayed, automatically. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the U S B jacks on the side of TV. IN · It doesn't support USB HDD · This TV Supports on JPEG and MP3. When removing the USB device USB memory stick Select the USB EJECT menu before removing the USB device. 1Q. MENU 2 3 OK Select USB Eject. Select P H O T O L I S T or M U S I C L I S T 2 OK 13 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. 14 ENGLISH Cleaning the Screen 1 2 A A A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Do not to use a wet cloth. Extended Absence CAUTION G If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges. TO VIEW THE USER'S GUIDE ON THE CD-ROM To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader. If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD" double-click your language. To view the User's guide The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC. After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly. Open "My computer" Open the folder "LG" Double click the "index.htm" file. WEIGHT MODELS with stand Weight without stand 32LG60** 32LG6000-ZA 14.4 kg / 31.7 lbs 12.2 kg / 26.9 lbs 37LG60** 37LG6000-ZA 21.2 kg / 46.3 lbs 1 kg / 39.9 lbs 8.1 42LG60** 42LG6000-ZA 24.1 kg / 53.1 lbs 20.4 kg / 44.9 lbs MODELS with stand Weight I 42LG61** 42LG6100-ZB 21.3 kg / 47 lbs 18 kg / 39.7 lbs 47LG60** 47LG6000-ZA 32.8 kg / 73.3 lbs 27 kg / 59.9 lbs .2 without stand The specifications shown above may be changed without prior notice for quality improvement. TROUBLESHOOTING The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set : TV, STB etc. A Install new batteries. A ENGLISH The remote control does not work Power is suddenly turned off